summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt')
-rw-r--r--kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt121
1 files changed, 121 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
new file mode 100644
index 000000000..695150a41
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -0,0 +1,121 @@
+* Exynos Thermal Management Unit (TMU)
+
+** Required properties:
+
+- compatible : One of the following:
+ "samsung,exynos3250-tmu"
+ "samsung,exynos4412-tmu"
+ "samsung,exynos4210-tmu"
+ "samsung,exynos5250-tmu"
+ "samsung,exynos5260-tmu"
+ "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
+ "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
+ Exynos5420 (Must pass triminfo base and triminfo clock)
+ "samsung,exynos5440-tmu"
+ "samsung,exynos7-tmu"
+- interrupt-parent : The phandle for the interrupt controller
+- reg : Address range of the thermal registers. For soc's which has multiple
+ instances of TMU and some registers are shared across all TMU's like
+ interrupt related then 2 set of register has to supplied. First set
+ belongs to register set of TMU instance and second set belongs to
+ registers shared with the TMU instance.
+
+ NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
+ channels 2, 3 and 4
+ Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
+ register, also provide clock to access that base.
+
+ TRIMINFO at 0x1006c000 contains data for TMU channel 3
+ TRIMINFO at 0x100a0000 contains data for TMU channel 4
+ TRIMINFO at 0x10068000 contains data for TMU channel 2
+
+- interrupts : Should contain interrupt for thermal system
+- clocks : The main clocks for TMU device
+ -- 1. operational clock for TMU channel
+ -- 2. optional clock to access the shared registers of TMU channel
+ -- 3. optional special clock for functional operation
+- clock-names : Thermal system clock name
+ -- "tmu_apbif" operational clock for current TMU channel
+ -- "tmu_triminfo_apbif" clock to access the shared triminfo register
+ for current TMU channel
+ -- "tmu_sclk" clock for functional operation of the current TMU
+ channel
+- vtmu-supply: This entry is optional and provides the regulator node supplying
+ voltage to TMU. If needed this entry can be placed inside
+ board/platform specific dts file.
+Following properties are mandatory (depending on SoC):
+- samsung,tmu_gain: Gain value for internal TMU operation.
+- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
+- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
+- samsung,tmu_efuse_value: Default level of temperature - it is needed when
+ in factory fusing produced wrong value
+- samsung,tmu_min_efuse_value: Minimum temperature fused value
+- samsung,tmu_max_efuse_value: Maximum temperature fused value
+- samsung,tmu_first_point_trim: First point trimming value
+- samsung,tmu_second_point_trim: Second point trimming value
+- samsung,tmu_default_temp_offset: Default temperature offset
+- samsung,tmu_cal_type: Callibration type
+
+Example 1):
+
+ tmu@100C0000 {
+ compatible = "samsung,exynos4412-tmu";
+ interrupt-parent = <&combiner>;
+ reg = <0x100C0000 0x100>;
+ interrupts = <2 4>;
+ clocks = <&clock 383>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
+ vtmu-supply = <&tmu_regulator_node>;
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+Example 2):
+
+ tmuctrl_0: tmuctrl@160118 {
+ compatible = "samsung,exynos5440-tmu";
+ reg = <0x160118 0x230>, <0x160368 0x10>;
+ interrupts = <0 58 0>;
+ clocks = <&clock 21>;
+ clock-names = "tmu_apbif";
+ #include "exynos5440-tmu-sensor-conf.dtsi"
+ };
+
+Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+ interrupts = <0 184 0>;
+ clocks = <&clock 318>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+ interrupts = <0 185 0>;
+ clocks = <&clock 318>, <&clock 319>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_gpu: tmu@100a0000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+ interrupts = <0 215 0>;
+ clocks = <&clock 319>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+Note: For multi-instance tmu each instance should have an alias correctly
+numbered in "aliases" node.
+
+Example:
+
+aliases {
+ tmuctrl0 = &tmuctrl_0;
+ tmuctrl1 = &tmuctrl_1;
+ tmuctrl2 = &tmuctrl_2;
+};