summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/spi
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/spi')
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt38
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt4
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt2
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt2
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt2
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt1
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt58
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-orion.txt8
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt3
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt39
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt26
-rw-r--r--kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt8
13 files changed, 209 insertions, 6 deletions
diff --git a/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
new file mode 100644
index 000000000..9887b0724
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
@@ -0,0 +1,38 @@
+Broadcom BCM2835 auxiliar SPI1/2 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxiliary block. This binding applies to the SPI1/2 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux-spi".
+- reg: Should contain register location and length for the spi block
+- interrupts: Should contain shared interrupt of the aux block
+- clocks: The clock feeding the SPI controller - needs to
+ point to the auxiliar clock driver of the bcm2835,
+ as this clock will enable the output gate for the specific
+ clock.
+- cs-gpios: the cs-gpios (native cs is NOT supported)
+ see also spi-bus.txt
+
+Example:
+
+spi1@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ interrupts = <1 29>;
+ clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
+};
+
+spi2@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ interrupts = <1 29>;
+ clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt b/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt
index 4c388bb2f..705075da2 100644
--- a/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings:
- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
(default is 64)
- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
- (default is 64, or 256 on R-Car Gen2)
+ (default is 64)
Pinctrl properties might be needed, too. See
Documentation/devicetree/bindings/pinctrl/renesas,*.
@@ -60,7 +60,7 @@ Example:
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
diff --git a/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index bd99193e8..204b311e0 100644
--- a/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- cs-gpios : Specifies the gpio pis to be used for chipselects.
- num-cs : The number of chipselects. If omitted, this will default to 4.
+- reg-io-width : The I/O register width (in bytes) implemented by this
+ device. Supported values are 2 or 4 (the default).
Child nodes as per the generic SPI binding.
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt b/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt
new file mode 100644
index 000000000..9c696fa66
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt
@@ -0,0 +1,24 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
+
+Required properties:
+- compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
+- reg: Base address and size of the controllers memory area
+- clocks: phandle of the AHB clock.
+- clock-names: has to be "ahb".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@1f000000 {
+ compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll 2>;
+ clock-names = "ahb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt b/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 12ecfe9e3..d1e914adc 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -12,6 +12,8 @@ Required properties:
- compatible:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+ - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+ family
- reg: Offset and length of SPI controller register space
- num-cs: Number of chip selects. This includes internal as well as
GPIO chip selects.
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index 70af78a91..fa77f874e 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,7 @@
ARM Freescale DSPI controller
Required properties:
-- compatible : "fsl,vf610-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
- reg : Offset and length of the register set for the device
- interrupts : Should contain SPI controller interrupt
- clocks: from common clock binding: handle to dspi clock.
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
index e02fbf18c..494db6012 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -21,6 +21,7 @@ Required properties:
Optional properties:
- img,supports-quad-mode: Should be set if the interface supports quad mode
SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
Example:
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
new file mode 100644
index 000000000..ce363c923
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -0,0 +1,58 @@
+Binding for MTK SPI controller
+
+Required properties:
+- compatible: should be one of the following.
+ - mediatek,mt8173-spi: for mt8173 platforms
+ - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt6589-spi: for mt6589 platforms
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+- reg: Address and length of the register set for the device
+
+- interrupts: Should contain spi interrupt
+
+- clocks: phandles to input clocks.
+ The first should be one of the following. It's PLL.
+ - <&clk26m>: specify parent clock 26MHZ.
+ - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
+ It's the default one.
+ - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+ The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
+ The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
+
+- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
+ muxes clock, and "spi-clk" for the clock gate.
+
+Optional properties:
+-cs-gpios: see spi-bus.txt, only required for MT8173.
+
+- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
+ controller used. This is a array, the element value should be 0~3,
+ only required for MT8173.
+ 0: specify GPIO69,70,71,72 for spi pins.
+ 1: specify GPIO102,103,104,105 for spi pins.
+ 2: specify GPIO128,129,130,131 for spi pins.
+ 3: specify GPIO5,6,7,8 for spi pins.
+
+Example:
+
+- SoC Specific Portion:
+spi: spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <1>, <0>;
+ status = "disabled";
+};
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt b/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt
index 50c3a3de6..98bc69815 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -1,7 +1,13 @@
Marvell Orion SPI device
Required properties:
-- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi".
+- compatible : should be on of the following:
+ - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
+ - "marvell,armada-370-spi", for the Armada 370 SoCs
+ - "marvell,armada-375-spi", for the Armada 375 SoCs
+ - "marvell,armada-380-spi", for the Armada 38x SoCs
+ - "marvell,armada-390-spi", for the Armada 39x SoCs
+ - "marvell,armada-xp-spi", for the Armada XP SoCs
- reg : offset and length of the register set for the device
- cell-index : Which of multiple SPI controllers is this.
Optional properties:
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt b/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt
index 4c7adb8f7..ddd78ff68 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt
@@ -1,7 +1,8 @@
* CSR SiRFprimaII Serial Peripheral Interface
Required properties:
-- compatible : Should be "sirf,prima2-spi"
+- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
+ or "sirf,atlas7-usp"
- reg : Offset and length of the register set for the device
- interrupts : Should contain SPI interrupt
- resets: phandle to the reset controller asserting this device in
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt b/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt
new file mode 100644
index 000000000..40e82d51e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt
@@ -0,0 +1,39 @@
+SPI Master controller for Netlogic XLP MIPS64 SOCs
+==================================================
+
+Currently this SPI controller driver is supported for the following
+Netlogic XLP SoCs:
+ XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+- compatible : Should be "netlogic,xlp832-spi".
+- #address-cells : Number of cells required to define a chip select address
+ on the SPI bus.
+- #size-cells : Should be zero.
+- reg : Should contain register location and length.
+- clocks : Phandle of the spi clock
+- interrupts : Interrupt number used by this controller.
+- interrupt-parent : Phandle of the parent interrupt controller.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+
+ spi: xlp_spi@3a100 {
+ compatible = "netlogic,xlp832-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x3a100 0x100>;
+ clocks = <&spi_clk>;
+ interrupts = <34>;
+ interrupt-parent = <&pic>;
+
+ spi_nor@1 {
+ compatible = "spansion,s25sl12801";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip Select */
+ spi-max-frequency = <40000000>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
new file mode 100644
index 000000000..c8f50e5cf
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -0,0 +1,26 @@
+Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
+-------------------------------------------------------------------
+
+Required properties:
+- compatible : Should be "xlnx,zynqmp-qspi-1.0".
+- reg : Physical base address and size of GQSPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller.
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+
+Example:
+ qspi: spi@ff0f0000 {
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt b/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 4f8184d06..fb588b3e6 100644
--- a/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -4,11 +4,16 @@ Required properties:
- compatible : should be "atmel,at91rm9200-spi".
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
-- cs-gpios: chipselects
+- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
+ Chip Select Active After Transfer feature).
- clock-names: tuple listing input clock names.
Required elements: "spi_clk"
- clocks: phandles to input clocks.
+Optional properties:
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+ capable SPI controllers.
+
Example:
spi1: spi@fffcc000 {
@@ -20,6 +25,7 @@ spi1: spi@fffcc000 {
clocks = <&spi1_clk>;
clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
+ atmel,fifo-size = <32>;
status = "okay";
mmc-slot@0 {