summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt')
-rw-r--r--kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt208
1 files changed, 208 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
new file mode 100644
index 000000000..7fc1b010f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -0,0 +1,208 @@
+* Freescale DMA Controllers
+
+** Freescale Elo DMA Controller
+ This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+ series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+Required properties:
+
+- compatible : must include "fsl,elo-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+- cell-index : controller index. 0 for controller @ 0x8100
+- interrupts : interrupt specifier for DMA IRQ
+- interrupt-parent : optional, if needed for interrupt mapping
+
+- DMA channel nodes:
+ - compatible : must include "fsl,elo-dma-channel"
+ However, see note below.
+ - reg : DMA channel specific registers
+ - cell-index : DMA channel index starts at 0.
+
+Optional properties:
+ - interrupts : interrupt specifier for DMA channel IRQ
+ (on 83xx this is expected to be identical to
+ the interrupts property of the parent node)
+ - interrupt-parent : optional, if needed for interrupt mapping
+
+Example:
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a4>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <0>;
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <1>;
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <2>;
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <3>;
+ reg = <0x180 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+** Freescale EloPlus DMA Controller
+ This is a 4-channel DMA controller with extended addresses and chaining,
+ mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+ mpc8540, mpc8641 p4080, bsc9131 etc.
+
+Required properties:
+
+- compatible : must include "fsl,eloplus-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+- cell-index : controller index. 0 for controller @ 0x21000,
+ 1 for controller @ 0xc000
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+ - compatible : must include "fsl,eloplus-dma-channel"
+ However, see note below.
+ - cell-index : DMA channel index starts at 0.
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
+ - interrupt-parent : optional, if needed for interrupt mapping
+
+Example:
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 4>;
+ ranges = <0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+** Freescale Elo3 DMA Controller
+ DMA controller which has same function as EloPlus except that Elo3 has 8
+ channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+ series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible : must include "fsl,elo3-dma"
+- reg : contains two entries for DMA General Status Registers,
+ i.e. DGSR0 which includes status for channel 1~4, and
+ DGSR1 for channel 5~8
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+ - compatible : must include "fsl,eloplus-dma-channel"
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
+ - interrupt-parent : optional, if needed for interrupt mapping
+
+Example:
+dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4>,
+ <0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <79 2 0 0>;
+ };
+};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+for more information.