summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/pci
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/pci')
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt28
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt49
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt10
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt20
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt12
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt44
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt5
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt14
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/pci-msi.txt220
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt3
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/pci.txt4
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt12
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/ti-pci.txt3
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt68
-rw-r--r--kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt2
15 files changed, 481 insertions, 13 deletions
diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
new file mode 100644
index 000000000..09cd3bc4d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -0,0 +1,28 @@
+* Altera PCIe MSI controller
+
+Required properties:
+- compatible: should contain "altr,msi-1.0"
+- reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+- reg-names: must include the following entries:
+ "csr": CSR registers
+ "vector_slave": vectors slave port region
+- interrupt-parent: interrupt source phandle.
+- interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- num-vectors: number of vectors, range 1 to 32.
+- msi-controller: indicates that this is MSI controller node
+
+
+Example
+msi0: msi@0xFF200000 {
+ compatible = "altr,msi-1.0";
+ reg = <0xFF200000 0x00000010
+ 0xFF200010 0x00000080>;
+ reg-names = "csr", "vector_slave";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 42 4>;
+ msi-controller;
+ num-vectors = <32>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt
new file mode 100644
index 000000000..2951a6a50
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -0,0 +1,49 @@
+* Altera PCIe controller
+
+Required properties:
+- compatible : should contain "altr,pcie-root-port-1.0"
+- reg: a list of physical base address and length for TXS and CRA.
+- reg-names: must include the following entries:
+ "Txs": TX slave port region
+ "Cra": Control register access region
+- interrupt-parent: interrupt source phandle.
+- interrupts: specifies the interrupt source of the parent interrupt controller.
+ The format of the interrupt specifier depends on the parent interrupt
+ controller.
+- device_type: must be "pci"
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- ranges: describes the translation of addresses for root ports and standard
+ PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+ mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe
+ controller.
+- bus-range: PCI bus numbers covered
+
+Example
+ pcie_0: pcie@0xc00000000 {
+ compatible = "altr,pcie-root-port-1.0";
+ reg = <0xc0000000 0x20000000>,
+ <0xff220000 0x00004000>;
+ reg-names = "Txs", "Cra";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 40 4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ bus-range = <0x0 0xFF>;
+ device_type = "pci";
+ msi-parent = <&msi_to_gic_gen_0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_0 1>,
+ <0 0 0 2 &pcie_0 2>,
+ <0 0 0 3 &pcie_0 3>,
+ <0 0 0 4 &pcie_0 4>;
+ ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+ 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt
new file mode 100644
index 000000000..f7514c170
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt
@@ -0,0 +1,10 @@
+* ARM Juno R1 PCIe interface
+
+This PCIe host controller is based on PLDA XpressRICH3-AXI IP
+and thus inherits all the common properties defined in plda,xpressrich3-axi.txt
+as well as the base properties defined in host-generic-pci.txt.
+
+Required properties:
+ - compatible: "arm,juno-r1-pcie"
+ - dma-coherent: The host controller bridges the AXI transactions into PCIe bus
+ in a manner that makes the DMA operations to appear coherent to the CPUs.
diff --git a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index f7ce50e38..45c2a8094 100644
--- a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -17,6 +17,21 @@ Optional properties:
- phys: phandle of the PCIe PHY device
- phy-names: must be "pcie-phy"
+- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
+by the ASIC after power on reset. In this case, SW needs to configure it
+
+If the brcm,pcie-ob property is present, the following properties become
+effective:
+
+Required:
+- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
+address used by the iProc PCIe core (not the PCIe address)
+- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB)
+
+Optional:
+- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
+increase the outbound window size
+
Example:
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
@@ -38,6 +53,11 @@ Example:
phys = <&phy 0 5>;
phy-names = "pcie-phy";
+
+ brcm,pcie-ob;
+ brcm,pcie-ob-oarr-size;
+ brcm,pcie-ob-axi-offset = <0x00000000>;
+ brcm,pcie-ob-window-size = <256>;
};
pcie1: pcie@18013000 {
diff --git a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 9f4faa8e8..5b0853df9 100644
--- a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -15,14 +15,16 @@ Required properties:
to define the mapping of the PCIe interface to interrupt
numbers.
- num-lanes: number of lanes to use
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - "pcie"
- - "pcie_bus"
Optional properties:
+- num-lanes: number of lanes to use (this property should be specified unless
+ the link is brought already up in BIOS)
- reset-gpio: gpio pin number of power good signal
- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
specify this property, to keep backwards compatibility a range of 0x00-0xff
is assumed if not present)
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - "pcie"
+ - "pcie_bus"
diff --git a/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
new file mode 100644
index 000000000..17c6ed9c6
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -0,0 +1,44 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+ "rc_dbi": controller configuration registers;
+ "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent.
+
+Example:
+ pcie@0xb0080000 {
+ compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
+ reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
+ reg-names = "rc_dbi", "config";
+ bus-range = <0 15>;
+ msi-parent = <&its_pcie>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
+ num-lanes = <8>;
+ port-id = <1>;
+ #interrupts-cells = <1>;
+ interrupts-map-mask = <0xf800 0 0 7>;
+ interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10
+ 0x0 0 0 2 &mbigen_pcie 2 11
+ 0x0 0 0 3 &mbigen_pcie 3 12
+ 0x0 0 0 4 &mbigen_pcie 4 13>;
+ status = "ok";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt
index cf3e205e0..3f1d3fca6 100644
--- a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt
@@ -34,8 +34,9 @@ Properties of the host controller node:
- #size-cells : Must be 2.
- reg : The Configuration Space base address and size, as accessed
- from the parent bus.
-
+ from the parent bus. The base address corresponds to
+ the first bus in the "bus-range" property. If no
+ "bus-range" is specified, this will be bus 0 (the default).
Properties of the /chosen node:
diff --git a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 6286f049b..e3767857d 100644
--- a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -1,10 +1,20 @@
Freescale Layerscape PCIe controller
-This PCIe host controller is based on the Synopsis Designware PCIe IP
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
Required properties:
-- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie"
+- compatible: should contain the platform identifier such as:
+ "fsl,ls1021a-pcie", "snps,dw-pcie"
+ "fsl,ls2080a-pcie", "snps,dw-pcie"
- reg: base addresses and lengths of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt
new file mode 100644
index 000000000..9b3cc817d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt
@@ -0,0 +1,220 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI devices and MSI controllers.
+
+Each PCI device under a root complex is uniquely identified by its Requester ID
+(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+MSIs may be distinguished in part through the use of sideband data accompanying
+writes. In the case of PCI devices, this sideband data may be derived from the
+Requester ID. A mechanism is required to associate a device with both the MSI
+controllers it can address, and the sideband data that will be associated with
+its writes to those controllers.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- msi-map: Maps a Requester ID to an MSI controller and associated
+ msi-specifier data. The property is an arbitrary number of tuples of
+ (rid-base,msi-controller,msi-base,length), where:
+
+ * rid-base is a single cell describing the first RID matched by the entry.
+
+ * msi-controller is a single phandle to an MSI controller
+
+ * msi-base is an msi-specifier describing the msi-specifier produced for the
+ first RID matched by the entry.
+
+ * length is a single cell describing how many consecutive RIDs are matched
+ following the rid-base.
+
+ Any RID r in the interval [rid-base, rid-base + length) is associated with
+ the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
+
+- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
+ to an msi-specifier per the msi-map property.
+
+- msi-parent: Describes the MSI parent of the root complex itself. Where
+ the root complex and MSI controller do not pass sideband data with MSI
+ writes, this property may be used to describe the MSI controller(s)
+ used by PCI devices under the root complex, if defined as such in the
+ binding for the root complex.
+
+
+Example (1)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, identity-mapped.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x10000>,
+ };
+};
+
+
+Example (2)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, masked to only the device and function bits.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x100>,
+ msi-map-mask = <0xff>
+ };
+};
+
+
+Example (3)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * ignored.
+ */
+ msi-map = <0x0000 &msi 0x0000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (4)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * negated.
+ */
+ msi-map = <0x0000 &msi 0x8000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (5)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xc 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@c {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to MSI controller a is the
+ * RID, but the high bit of the bus number is negated.
+ * The sideband data provided to MSI controller b is the
+ * RID, identity-mapped.
+ * MSI controller c is not addressable.
+ */
+ msi-map = <0x0000 &msi_a 0x8000 0x08000>,
+ <0x8000 &msi_a 0x0000 0x08000>,
+ <0x0000 &msi_b 0x0000 0x10000>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index d8ef5bf50..7fab84b33 100644
--- a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -7,7 +7,8 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
- "renesas,pci-r8a7791" for the R8A7791 SoC.
+ "renesas,pci-r8a7791" for the R8A7791 SoC;
+ "renesas,pci-r8a7794" for the R8A7794 SoC.
- reg: A list of physical regions to access the device: the first is
the operational registers for the OHCI/EHCI controllers and the
second is for the bridge configuration and control registers.
diff --git a/kernel/Documentation/devicetree/bindings/pci/pci.txt b/kernel/Documentation/devicetree/bindings/pci/pci.txt
index f8fbe9af7..08dcfad09 100644
--- a/kernel/Documentation/devicetree/bindings/pci/pci.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/pci.txt
@@ -1,12 +1,12 @@
PCI bus bridges have standardized Device Tree bindings:
PCI Bus Binding to: IEEE Std 1275-1994
-http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf
+http://www.firmware.org/1275/bindings/pci/pci2_1.pdf
And for the interrupt mapping part:
Open Firmware Recommended Practice: Interrupt Mapping
-http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+http://www.firmware.org/1275/practice/imap/imap0_9d.pdf
Additionally to the properties specified in the above standards a host bridge
driver implementation may support the following properties:
diff --git a/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt
new file mode 100644
index 000000000..f3f75bfb4
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt
@@ -0,0 +1,12 @@
+* PLDA XpressRICH3-AXI host controller
+
+The PLDA XpressRICH3-AXI host controller can be configured in a manner that
+makes it compliant with the SBSA[1] standard published by ARM Ltd. For those
+scenarios, the host-generic-pci.txt bindings apply with the following additions
+to the compatible property:
+
+Required properties:
+ - compatible: should contain "plda,xpressrich3-axi" to identify the IP used.
+
+
+[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/
diff --git a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt
index 3d217911b..60e25161f 100644
--- a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -23,6 +23,9 @@ PCIe Designware Controller
interrupt-map-mask,
interrupt-map : as specified in ../designware-pcie.txt
+Optional Property:
+ - gpios : Should be added if a gpio line is required to drive PERST# line
+
Example:
axi {
compatible = "simple-bus";
diff --git a/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
new file mode 100644
index 000000000..36d881c8e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -0,0 +1,68 @@
+* AppliedMicro X-Gene v1 PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "apm,xgene1-msi" to identify
+ X-Gene v1 PCIe MSI controller block.
+- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node
+- reg: physical base address (0x79000000) and length (0x900000) for controller
+ registers. These registers include the MSI termination address and data
+ registers as well as the MSI interrupt status registers.
+- reg-names: not required
+- interrupts: A list of 16 interrupt outputs of the controller, starting from
+ interrupt number 0x10 to 0x1f.
+- interrupt-names: not required
+
+Each PCIe node needs to have property msi-parent that points to msi controller node
+
+Examples:
+
+SoC DTSI:
+
+ + MSI node:
+ msi@79000000 {
+ compatible = "apm,xgene1-msi";
+ msi-controller;
+ reg = <0x00 0x79000000 0x0 0x900000>;
+ interrupts = <0x0 0x10 0x4>
+ <0x0 0x11 0x4>
+ <0x0 0x12 0x4>
+ <0x0 0x13 0x4>
+ <0x0 0x14 0x4>
+ <0x0 0x15 0x4>
+ <0x0 0x16 0x4>
+ <0x0 0x17 0x4>
+ <0x0 0x18 0x4>
+ <0x0 0x19 0x4>
+ <0x0 0x1a 0x4>
+ <0x0 0x1b 0x4>
+ <0x0 0x1c 0x4>
+ <0x0 0x1d 0x4>
+ <0x0 0x1e 0x4>
+ <0x0 0x1f 0x4>;
+ };
+
+ + PCIe controller node with msi-parent property pointing to MSI node:
+ pcie0: pcie@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ msi-parent= <&msi>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index 3e2c88d97..02f979a48 100644
--- a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -58,5 +58,5 @@ Example:
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
- }
+ };
};