summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/mfd')
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/88pm860x.txt85
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/ab8500.txt159
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/arizona.txt95
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/as3711.txt73
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/as3722.txt213
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt15
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt51
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/atmel-matrix.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/atmel-smc.txt19
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/axp20x.txt96
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/bfticu.txt25
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt39
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt65
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/da9052-i2c.txt60
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/da9055.txt72
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/da9063.txt93
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/da9150.txt43
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/hi6421.txt38
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/lp3943.txt33
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/max14577.txt146
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/max77686.txt82
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/max77693.txt121
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/max8925.txt64
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/max8998.txt119
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/mc13xxx.txt158
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/mt6397.txt70
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/omap-usb-host.txt103
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt27
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/palmas.txt53
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt75
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt22
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt97
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/qcom-rpm.txt264
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/qriox.txt17
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/rk808.txt177
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt36
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/s2mpa01.txt90
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt139
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/sky81452.txt35
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/stmpe.txt29
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt59
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/syscon.txt20
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt107
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt19
-rwxr-xr-xkernel/Documentation/devicetree/bindings/mfd/tps6507x.txt91
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/tps65910.txt201
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/twl-familly.txt47
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/twl4030-audio.txt46
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt48
-rw-r--r--kernel/Documentation/devicetree/bindings/mfd/twl6040.txt67
50 files changed, 3927 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/mfd/88pm860x.txt b/kernel/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 000000000..63f3ee337
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+ - The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+ of one chip, and this property stores the I2C address of
+ another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+88pm860x-onkey : : On key
+88pm860x-rtc : : RTC
+88pm8607 : : Regulators
+88pm860x-backlight : : Backlight
+88pm860x-led : : Led
+88pm860x-touch : : Touchscreen
+
+Example:
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+ interrupts = <4>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ marvell,88pm860x-irq-read-clr;
+ marvell,88pm860x-slave-addr = <0x11>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ rtc {
+ marvell,88pm860x-vrtc = <1>;
+ };
+ touch {
+ marvell,88pm860x-gpadc-prebias = <1>;
+ marvell,88pm860x-gpadc-slot-cycle = <1>;
+ marvell,88pm860x-tsi-prebias = <6>;
+ marvell,88pm860x-pen-prebias = <16>;
+ marvell,88pm860x-pen-prechg = <2>;
+ marvell,88pm860x-resistor-X = <300>;
+ };
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
+ };
+ leds {
+ led0-red {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-green {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-blue {
+ marvell,88pm860x-iset = <12>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/ab8500.txt b/kernel/Documentation/devicetree/bindings/mfd/ab8500.txt
new file mode 100644
index 000000000..cd9e90c5d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -0,0 +1,159 @@
+* AB8500 Multi-Functional Device (MFD)
+
+Required parent device properties:
+- compatible : contains "stericsson,ab8500";
+- interrupts : contains the IRQ line for the AB8500
+- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
+- #interrupt-cells : should be 2, for 2-cell format
+ - The first cell is the AB8500 local IRQ number
+ - The second cell is used to specify optional parameters
+ - bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+The AB8500 consists of a large and varied group of sub-devices:
+
+Device IRQ Names Supply Names Description
+------ --------- ------------ -----------
+ab8500-bm : : : Battery Manager
+ab8500-btemp : : : Battery Temperature
+ab8500-charger : : : Battery Charger
+ab8500-codec : : : Audio Codec
+ab8500-fg : : vddadc : Fuel Gauge
+ : NCONV_ACCU : : Accumulate N Sample Conversion
+ : BATT_OVV : : Battery Over Voltage
+ : LOW_BAT_F : : LOW threshold battery voltage
+ : CC_INT_CALIB : : Coulomb Counter Internal Calibration
+ : CCEOC : : Coulomb Counter End of Conversion
+ab8500-btemp : : vtvout : Battery Temperature
+ : BAT_CTRL_INDB : : Battery Removal Indicator
+ : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
+ : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
+ : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
+ : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+ab8500-charger : : vddadc : Charger interface
+ : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
+ : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
+ : MAIN_EXT_CH_NOT_OK : : main charger not OK
+ : MAIN_CH_TH_PROT_R : : Die temp is above main charger
+ : MAIN_CH_TH_PROT_F : : Die temp is below main charger
+ : VBUS_DET_F : : VBUS falling detected
+ : VBUS_DET_R : : VBUS rising detected
+ : USB_LINK_STATUS : : USB link status has changed
+ : USB_CH_TH_PROT_R : : Die temp is above usb charger
+ : USB_CH_TH_PROT_F : : Die temp is below usb charger
+ : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
+ : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
+ : CH_WD_EXP : : Charger watchdog detected
+ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
+ SW_CONV_END : :
+ab8500-gpio : : : GPIO Controller
+ab8500-ponkey : ONKEY_DBF : : Power-on Key
+ ONKEY_DBR : :
+ab8500-pwm : : : Pulse Width Modulator
+ab8500-regulator : : : Regulators
+ab8500-rtc : 60S : : Real Time Clock
+ : ALARM : :
+ab8500-sysctrl : : : System Control
+ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
+ : ID_WAKEUP_F : v-ape :
+ : VBUS_DET_F : musb_1v8 :
+ : VBUS_DET_R : :
+ : USB_LINK_STATUS : :
+ : USB_ADP_PROBE_PLUG : :
+ : USB_ADP_PROBE_UNPLUG : :
+
+Required child device properties:
+- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
+ pwm|regulator|rtc|sysctrl|usb]";
+
+Optional child device properties:
+- interrupts : contains the device IRQ(s) using the 2-cell format (see above)
+- interrupt-names : contains names of IRQ resource in the order in which they were
+ supplied in the interrupts property
+- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
+
+Non-standard child device properties:
+ - Audio CODEC:
+ - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
+ - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
+ - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
+
+ab8500 {
+ compatible = "stericsson,ab8500";
+ interrupts = <0 40 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 0x4
+ 18 0x4>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 0x4
+ 39 0x4>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
+ ab8500-usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 0x4
+ 96 0x4
+ 14 0x4
+ 15 0x4
+ 79 0x4
+ 74 0x4
+ 75 0x4>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-ponkey";
+ interrupts = <6 0x4
+ 7 0x4>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
+ ab8500-regulators {
+ compatible = "stericsson,ab8500-regulator";
+
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ /*
+ * See: Documentation/devicetree/bindings/regulator/regulator.txt
+ * for more information on regulators
+ */
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/arizona.txt b/kernel/Documentation/devicetree/bindings/mfd/arizona.txt
new file mode 100644
index 000000000..7665aa959
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -0,0 +1,95 @@
+Wolfson Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilites and a range
+of analogue I/O.
+
+Required properties:
+
+ - compatible : One of the following chip-specific strings:
+ "wlf,wm5102"
+ "wlf,wm5110"
+ "wlf,wm8280"
+ "wlf,wm8997"
+ - reg : I2C slave address when connected using I2C, chip select number when
+ using SPI.
+
+ - interrupts : The interrupt line the /IRQ signal for the device is
+ connected to.
+ - interrupt-controller : Arizona class devices contain interrupt controllers
+ and may provide interrupt services to other devices.
+ - interrupt-parent : The parent interrupt controller.
+ - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
+
+ - gpio-controller : Indicates this device is a GPIO controller.
+ - #gpio-cells : Must be 2. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+
+ - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
+ as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
+ wm5110, wm8280)
+
+ - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
+ wm5110, wm8280)
+
+ - SPKVDD-supply : Speaker driver power supply (wm8997)
+
+Optional properties:
+
+ - wlf,reset : GPIO specifier for the GPIO controlling /RESET
+ - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
+
+ - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
+ for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
+ absent, no configuration of these registers is performed. If any entry has
+ a value that is out of range for a 16 bit register then the chip default
+ will be used. If present exactly five values must be specified.
+
+ - wlf,inmode : A list of INn_MODE register values, where n is the number
+ of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+ 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+ If present, values must be specified less than or equal to the number of
+ input singals. If values less than the number of input signals, elements
+ that has not been specifed are set to 0 by default.
+
+ - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+ selected from either MICVDD or one of the MICBIAS's, defines
+ (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+ present, the number of values should be less than or equal to the
+ number of inputs, unspecified inputs will use the chip default.
+
+ - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
+ they are being externally supplied. As covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional subnodes:
+ - ldo1 : Initial data for the LDO1 regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+ - micvdd : Initial data for the MICVDD regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+codec: wm5102@1a {
+ compatible = "wlf,wm5102";
+ reg = <0x1a>;
+ interrupts = <347>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ wlf,gpio-defaults = <
+ ARIZONA_GP_FN_TXLRCLK
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ ARIZONA_GP_DEFAULT
+ >;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/as3711.txt b/kernel/Documentation/devicetree/bindings/mfd/as3711.txt
new file mode 100644
index 000000000..d98cf18c7
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/as3711.txt
@@ -0,0 +1,73 @@
+AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
+supplies, a battery charger and an RTC. So far only bindings for the two stepup
+DCDC converters are defined. Other DCDC and LDO supplies are configured, using
+standard regulator properties, they must belong to a sub-node, called
+"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
+configuration should be placed in a subnode, called "backlight."
+
+Compulsory properties:
+- compatible : must be "ams,as3711"
+- reg : specifies the I2C address
+
+To use the SU1 converter as a backlight source the following two properties must
+be provided:
+- su1-dev : framebuffer phandle
+- su1-max-uA : maximum current
+
+To use the SU2 converter as a backlight source the following two properties must
+be provided:
+- su2-dev : framebuffer phandle
+- su1-max-uA : maximum current
+
+Additionally one of these properties must be provided to select the type of
+feedback used:
+- su2-feedback-voltage : voltage feedback is used
+- su2-feedback-curr1 : CURR1 input used for current feedback
+- su2-feedback-curr2 : CURR2 input used for current feedback
+- su2-feedback-curr3 : CURR3 input used for current feedback
+- su2-feedback-curr-auto: automatic current feedback selection
+
+and one of these to select the over-voltage protection pin
+- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection
+- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection
+- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection
+- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection
+
+If "su2-feedback-curr-auto" is selected, one or more of the following properties
+have to be specified:
+- su2-auto-curr1 : use CURR1 input for current feedback
+- su2-auto-curr2 : use CURR2 input for current feedback
+- su2-auto-curr3 : use CURR3 input for current feedback
+
+Example:
+
+as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ backlight {
+ compatible = "ams,as3711-bl";
+ su2-dev = <&lcdc>;
+ su2-max-uA = <36000>;
+ su2-feedback-curr-auto;
+ su2-fbprot-gpio4;
+ su2-auto-curr1;
+ su2-auto-curr2;
+ su2-auto-curr3;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/as3722.txt b/kernel/Documentation/devicetree/bindings/mfd/as3722.txt
new file mode 100644
index 000000000..4f64b2a73
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -0,0 +1,213 @@
+* ams AS3722 Power management IC.
+
+Required properties:
+-------------------
+- compatible: Must be "ams,as3722".
+- reg: I2C device address.
+- interrupt-controller: AS3722 has internal interrupt controller which takes the
+ interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
+ as external input.
+- #interrupt-cells: Should be set to 2 for IRQ number and flags.
+ The first cell is the IRQ number. IRQ numbers for different interrupt source
+ of AS3722 are defined at dt-bindings/mfd/as3722.h
+ The second cell is the flags, encoded as the trigger masks from binding document
+ interrupts.txt, using dt-bindings/irq.
+
+Optional properties:
+--------------------
+- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
+ interrupt pin. Missing this will disable internal pullup on INT pin.
+- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
+ i2c scl/sda pins. Missing this will disable internal pullup on i2c
+ scl/sda lines.
+
+Optional submodule and their properties:
+=======================================
+
+Pinmux and GPIO:
+===============
+Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
+functions.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Following are properties which is needed if GPIO and pinmux functionality
+is required:
+ Required properties:
+ -------------------
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Number of GPIO cells. Refer to binding document
+ gpio/gpio.txt
+
+ Optional properties:
+ --------------------
+ Following properties are require if pin control setting is required
+ at boot.
+ - pinctrl-names: A pinctrl state named "default" be defined, using the
+ bindings in pinctrl/pinctrl-binding.txt.
+ - pinctrl[0...n]: Properties to contain the phandle that refer to
+ different nodes of pin control settings. These nodes represents
+ the pin control setting of state 0 to state n. Each of these
+ nodes contains different subnodes to represents some desired
+ configuration for a list of pins. This configuration can
+ include the mux function to select on those pin(s), and
+ various pin configuration parameters, such as pull-up,
+ open drain.
+
+ Each subnode have following properties:
+ Required properties:
+ - pins: List of pins. Valid values of pins properties are:
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5,
+ gpio6, gpio7
+
+ Optional properties:
+ function, bias-disable, bias-pull-up, bias-pull-down,
+ bias-high-impedance, drive-open-drain.
+
+ Valid values for function properties are:
+ gpio, interrupt-out, gpio-in-interrupt,
+ vsup-vbat-low-undebounce-out,
+ vsup-vbat-low-debounce-out,
+ voltage-in-standby, oc-pg-sd0, oc-pg-sd6,
+ powergood-out, pwm-in, pwm-out, clk32k-out,
+ watchdog-in, soft-reset-in
+
+Regulators:
+===========
+Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
+functionality is needed.
+
+Following are properties of regulator subnode.
+
+ Optional properties:
+ -------------------
+ The input supply of regulators are the optional properties on the
+ regulator node. The input supply of these regulators are provided
+ through following properties:
+ vsup-sd2-supply: Input supply for SD2.
+ vsup-sd3-supply: Input supply for SD3.
+ vsup-sd4-supply: Input supply for SD4.
+ vsup-sd5-supply: Input supply for SD5.
+ vin-ldo0-supply: Input supply for LDO0.
+ vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+ vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+ vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+ vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+ vin-ldo11-supply: Input supply for LDO11.
+
+ Optional sub nodes for regulators:
+ ---------------------------------
+ The subnodes name is the name of regulator and it must be one of:
+ sd[0-6], ldo[0-7], ldo[9-11]
+
+ Each sub-node should contain the constraints and initialization
+ information for that regulator. See regulator.txt for a description
+ of standard properties for these sub-nodes.
+ Additional optional custom properties are listed below.
+ ams,ext-control: External control of the rail. The option of
+ this properties will tell which external input is
+ controlling this rail. Valid values are 0, 1, 2 ad 3.
+ 0: There is no external control of this rail.
+ 1: Rail is controlled by ENABLE1 input pin.
+ 2: Rail is controlled by ENABLE2 input pin.
+ 3: Rail is controlled by ENABLE3 input pin.
+ Missing this property on DT will be assume as no
+ external control. The external control pin macros
+ are defined @dt-bindings/mfd/as3722.h
+
+ ams,enable-tracking: Enable tracking with SD1, only supported
+ by LDO3.
+
+Power-off:
+=========
+AS3722 supports the system power off by turning off all its rail. This
+is provided through pm_power_off.
+The device node should have the following properties to enable this
+functionality
+ams,system-power-controller: Boolean, to enable the power off functionality
+ through this device.
+
+Example:
+--------
+#include <dt-bindings/mfd/as3722.h>
+...
+ams3722 {
+ compatible = "ams,as3722";
+ reg = <0x48>;
+
+ ams,system-power-controller;
+
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1_2_4_7 {
+ pins = "gpio1", "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k_out";
+ };
+ }
+
+ regulators {
+ vsup-sd2-supply = <...>;
+ ...
+
+ sd0 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ sd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-hdmi-pex";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ sd5 {
+ regulator-name = "vdd-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ....
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
new file mode 100644
index 000000000..a28569540
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -0,0 +1,15 @@
+* Device tree bindings for Atmel GPBR (General Purpose Backup Registers)
+
+The GPBR are a set of battery-backed registers.
+
+Required properties:
+- compatible: "atmel,at91sam9260-gpbr", "syscon"
+- reg: contains offset/length value of the GPBR memory
+ region.
+
+Example:
+
+gpbr: gpbr@fffffd50 {
+ compatible = "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffd50 0x10>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 000000000..f64de95a8
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+ Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
new file mode 100644
index 000000000..e3ef50ca0
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Atmel Bus Matrix
+
+The Bus Matrix registers are used to configure Atmel SoCs internal bus
+behavior (master/slave priorities, undefined burst length type, ...)
+
+Required properties:
+- compatible: Should be one of the following
+ "atmel,at91sam9260-matrix", "syscon"
+ "atmel,at91sam9261-matrix", "syscon"
+ "atmel,at91sam9263-matrix", "syscon"
+ "atmel,at91sam9rl-matrix", "syscon"
+ "atmel,at91sam9g45-matrix", "syscon"
+ "atmel,at91sam9n12-matrix", "syscon"
+ "atmel,at91sam9x5-matrix", "syscon"
+ "atmel,sama5d3-matrix", "syscon"
+- reg: Contains offset/length value of the Bus Matrix
+ memory region.
+
+Example:
+
+matrix: matrix@ffffec00 {
+ compatible = "atmel,sama5d3-matrix", "syscon";
+ reg = <0xffffec00 0x200>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-smc.txt
new file mode 100644
index 000000000..26eeed373
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Atmel SMC (Static Memory Controller)
+
+The SMC registers are used to configure Atmel EBI (External Bus Interface)
+to interface with standard memory devices (NAND, NOR, SRAM or specialized
+devices like FPGAs).
+
+Required properties:
+- compatible: Should be one of the following
+ "atmel,at91sam9260-smc", "syscon"
+ "atmel,sama5d3-smc", "syscon"
+- reg: Contains offset/length value of the SMC memory
+ region.
+
+Example:
+
+smc: smc@ffffc000 {
+ compatible = "atmel,sama5d3-smc", "syscon";
+ reg = <0xffffc000 0x1000>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt b/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt
new file mode 100644
index 000000000..98685f291
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -0,0 +1,96 @@
+AXP202/AXP209 device tree bindings
+
+The axp20x family current members :
+axp202 (X-Powers)
+axp209 (X-Powers)
+
+Required properties:
+- compatible: "x-powers,axp202" or "x-powers,axp209"
+- reg: The I2C slave address for the AXP chip
+- interrupt-parent: The parent interrupt controller
+- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
+- interrupt-controller: axp20x has its own internal IRQs
+- #interrupt-cells: Should be set to 1
+
+Optional properties:
+- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
+ (range: 750-1875). Default: 1.5MHz
+- <input>-supply: a phandle to the regulator supply node. May be omitted if
+ inputs are unregulated, such as using the IPSOUT output
+ from the PMIC.
+
+- regulators: A node that houses a sub-node for each regulator. Regulators
+ not used but preferred to be managed by the OS should be
+ listed as well.
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+ for more information on standard regulator bindings.
+
+Optional properties for DCDC regulators:
+- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
+ Default: Current hardware setting
+ The DCDC regulators work in a mixed PWM/PFM mode,
+ using PFM under light loads and switching to PWM
+ for heavier loads. Forcing PWM mode trades efficiency
+ under light loads for lower output noise. This
+ probably makes sense for HiFi audio related
+ applications that aren't battery constrained.
+
+
+AXP202/AXP209 regulators, type, and corresponding input supply names:
+
+Regulator Type Supply Name Notes
+--------- ---- ----------- -----
+DCDC2 : DC-DC buck : vin2-supply
+DCDC3 : DC-DC buck : vin3-supply
+LDO1 : LDO : acin-supply : always on
+LDO2 : LDO : ldo24in-supply : shared supply
+LDO3 : LDO : ldo3in-supply
+LDO4 : LDO : ldo24in-supply : shared supply
+LDO5 : LDO : ldo5in-supply
+
+Example:
+
+axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ x-powers,dcdc-freq = <1500>;
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ vdd_int_dll: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+ };
+
+ vdd_rtc: ldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-rtc";
+ };
+
+ avcc: ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
+ };
+
+ ldo3 {
+ /* unused but preferred to be managed by OS */
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/bfticu.txt b/kernel/Documentation/devicetree/bindings/mfd/bfticu.txt
new file mode 100644
index 000000000..65c90776c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/bfticu.txt
@@ -0,0 +1,25 @@
+KEYMILE bfticu Chassis Management FPGA
+
+The bfticu is a multifunction device that manages the whole chassis.
+Its main functionality is to collect IRQs from the whole chassis and signals
+them to a single controller.
+
+Required properties:
+- compatible: "keymile,bfticu"
+- interrupt-controller: the bfticu FPGA is an interrupt controller
+- interrupts: the main IRQ line to signal the collected IRQs
+- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
+ of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+ chassis-mgmt@3,0 {
+ compatible = "keymile,bfticu";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <3 0 0x100>;
+ interrupt-parent = <&mpic>;
+ interrupts = <6 1 0 0>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt b/kernel/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
new file mode 100644
index 000000000..be51a15e0
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
@@ -0,0 +1,39 @@
+-------------------------------
+BCM590xx Power Management Units
+-------------------------------
+
+Required properties:
+- compatible: "brcm,bcm59056"
+- reg: I2C slave address
+- interrupts: interrupt for the PMU. Generic interrupt client node bindings
+ are described in interrupt-controller/interrupts.txt
+
+------------------
+Voltage Regulators
+------------------
+
+Optional child nodes:
+- regulators: container node for regulators following the generic
+ regulator binding in regulator/regulator.txt
+
+ The valid regulator node names for BCM59056 are:
+ rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+ mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+ csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+ gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+ vbus
+
+Example:
+ pmu: bcm59056@8 {
+ compatible = "brcm,bcm59056";
+ reg = <0x08>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ regulators {
+ rfldo_reg: rfldo {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ...
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt b/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt
new file mode 100644
index 000000000..8009c3d87
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -0,0 +1,65 @@
+ChromeOS Embedded Controller
+
+Google's ChromeOS EC is a Cortex-M device which talks to the AP and
+implements various function such as keyboard and battery charging.
+
+The EC can be connect through various means (I2C, SPI, LPC) and the
+compatible string used depends on the interface. Each connection method has
+its own driver which connects to the top level interface-agnostic EC driver.
+Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
+the top-level driver.
+
+Required properties (I2C):
+- compatible: "google,cros-ec-i2c"
+- reg: I2C slave address
+
+Required properties (SPI):
+- compatible: "google,cros-ec-spi"
+- reg: SPI chip select
+
+Optional properties (SPI):
+- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
+ additional processing time in order to accept new transactions. If the delay
+ between transactions is not long enough the EC may not be able to respond
+ properly to subsequent transactions and cause them to hang. This property
+ specifies the delay, in usecs, introduced between transactions to account
+ for the time required by the EC to get back into a state in which new data
+ can be accepted.
+
+Required properties (LPC):
+- compatible: "google,cros-ec-lpc"
+- reg: List of (IO address, size) pairs defining the interface uses
+
+
+Example for I2C:
+
+i2c@12CA0000 {
+ cros-ec@1e {
+ reg = <0x1e>;
+ compatible = "google,cros-ec-i2c";
+ interrupts = <14 0>;
+ interrupt-parent = <&wakeup_eint>;
+ wakeup-source;
+ };
+
+
+Example for SPI:
+
+spi@131b0000 {
+ ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0x0>;
+ interrupts = <14 0>;
+ interrupt-parent = <&wakeup_eint>;
+ wakeup-source;
+ spi-max-frequency = <5000000>;
+ controller-data {
+ cs-gpio = <&gpf0 3 4 3 0>;
+ samsung,spi-cs;
+ samsung,spi-feedback-delay = <2>;
+ };
+ };
+};
+
+
+Example for LPC is not supplied as it is not yet implemented.
diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/kernel/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
new file mode 100644
index 000000000..1857f4a6b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -0,0 +1,60 @@
+* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
+ "dlg,da9053-ab", or "dlg,da9053-bb"
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9052/53 regulators are
+ bound using their names as listed below:
+
+ buck0 : regulator BUCK0
+ buck1 : regulator BUCK1
+ buck2 : regulator BUCK2
+ buck3 : regulator BUCK3
+ ldo4 : regulator LDO4
+ ldo5 : regulator LDO5
+ ldo6 : regulator LDO6
+ ldo7 : regulator LDO7
+ ldo8 : regulator LDO8
+ ldo9 : regulator LDO9
+ ldo10 : regulator LDO10
+ ldo11 : regulator LDO11
+ ldo12 : regulator LDO12
+ ldo13 : regulator LDO13
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa";
+ reg = <0x48>;
+
+ regulators {
+ buck0 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck2 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ buck3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9055.txt b/kernel/Documentation/devicetree/bindings/mfd/da9055.txt
new file mode 100644
index 000000000..6dab34d34
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/da9055.txt
@@ -0,0 +1,72 @@
+* Dialog DA9055 Power Management Integrated Circuit (PMIC)
+
+DA9055 consists of a large and varied group of sub-devices (I2C Only):
+
+Device Supply Names Description
+------ ------------ -----------
+da9055-gpio : : GPIOs
+da9055-regulator : : Regulators
+da9055-onkey : : On key
+da9055-rtc : : RTC
+da9055-hwmon : : ADC
+da9055-watchdog : : Watchdog
+
+The CODEC device in DA9055 has a separate, configurable I2C address and so
+is instantiated separately from the PMIC.
+
+For details on accompanying CODEC I2C device, see the following:
+Documentation/devicetree/bindings/sound/da9055.txt
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9055-pmic"
+- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the IRQs from da9055 are delivered to.
+- interrupts: IRQ line info for da9055 chip.
+- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
+- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9055 regulators are
+ bound using their names as listed below:
+
+ buck1 : regulator BUCK1
+ buck2 : regulator BUCK2
+ ldo1 : regulator LDO1
+ ldo2 : regulator LDO2
+ ldo3 : regulator LDO3
+ ldo4 : regulator LDO4
+ ldo5 : regulator LDO5
+ ldo6 : regulator LDO6
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Example:
+
+ pmic: da9055-pmic@5a {
+ compatible = "dlg,da9055-pmic";
+ reg = <0x5a>;
+ interrupt-parent = <&intc>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <2075000>;
+ };
+ buck2: BUCK2 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ ldo1: LDO1 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9063.txt b/kernel/Documentation/devicetree/bindings/mfd/da9063.txt
new file mode 100644
index 000000000..42c6fa6f1
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -0,0 +1,93 @@
+* Dialog DA9063 Power Management Integrated Circuit (PMIC)
+
+DA9093 consists of a large and varied group of sub-devices (I2C Only):
+
+Device Supply Names Description
+------ ------------ -----------
+da9063-regulator : : LDOs & BUCKs
+da9063-rtc : : Real-Time Clock
+da9063-watchdog : : Watchdog
+
+======
+
+Required properties:
+
+- compatible : Should be "dlg,da9063"
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+ modified to match the chip's OTP settings).
+- interrupt-parent : Specifies the reference to the interrupt controller for
+ the DA9063.
+- interrupts : IRQ line information.
+- interrupt-controller
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs. The
+ DA9063 regulators are bound using their names listed below:
+
+ bcore1 : BUCK CORE1
+ bcore2 : BUCK CORE2
+ bpro : BUCK PRO
+ bmem : BUCK MEM
+ bio : BUCK IO
+ bperi : BUCK PERI
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+ ldo5 : LDO_5
+ ldo6 : LDO_6
+ ldo7 : LDO_7
+ ldo8 : LDO_8
+ ldo9 : LDO_9
+ ldo10 : LDO_10
+ ldo11 : LDO_11
+
+ The component follows the standard regulator framework and the bindings
+ details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+- rtc : This node defines settings for the Real-Time Clock associated with
+ the DA9063. There are currently no entries in this binding, however
+ compatible = "dlg,da9063-rtc" should be added if a node is created.
+
+- watchdog : This node defines settings for the Watchdog timer associated
+ with the DA9063. There are currently no entries in this binding, however
+ compatible = "dlg,da9063-watchdog" should be added if a node is created.
+
+
+Example:
+
+ pmic0: da9063@58 {
+ compatible = "dlg,da9063"
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+
+ regulators {
+ DA9063_BCORE1: bcore1 {
+ regulator-name = "BCORE1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-boot-on;
+ };
+ DA9063_LDO11: ldo11 {
+ regulator-name = "LDO_11";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9150.txt b/kernel/Documentation/devicetree/bindings/mfd/da9150.txt
new file mode 100644
index 000000000..d0588eaa0
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -0,0 +1,43 @@
+Dialog Semiconductor DA9150 Combined Charger/Fuel-Gauge MFD bindings
+
+DA9150 consists of a group of sub-devices:
+
+Device Description
+------ -----------
+da9150-gpadc : General Purpose ADC
+da9150-charger : Battery Charger
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9150"
+- reg: Specifies the I2C slave address
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the IRQs from da9150 are delivered to.
+- interrupts: IRQ line info for da9150 chip.
+- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
+ (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+ further information relating to interrupt properties)
+
+Sub-devices:
+- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
+- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt
+
+
+Example:
+
+ charger_fg: da9150@58 {
+ compatible = "dlg,da9150";
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ gpadc: da9150-gpadc {
+ ...
+ };
+
+ da9150-charger {
+ ...
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/hi6421.txt b/kernel/Documentation/devicetree/bindings/mfd/hi6421.txt
new file mode 100644
index 000000000..0d5a4466a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -0,0 +1,38 @@
+* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
+
+Required parent device properties:
+- compatible : contains "hisilicon,hi6421-pmic";
+- reg : register range space of hi6421;
+
+Supported Hi6421 sub-devices include:
+
+Device IRQ Names Supply Names Description
+------ --------- ------------ -----------
+regulators : None : None : Regulators
+
+Required child device properties:
+None.
+
+Example:
+ hi6421 {
+ compatible = "hisilicon,hi6421-pmic";
+ reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */
+
+ regulators {
+ // supply for MLC NAND/ eMMC
+ hi6421_vout0_reg: hi6421_vout0 {
+ regulator-name = "VOUT0";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for 26M Oscillator
+ hi6421_vout1_reg: hi6421_vout1 {
+ regulator-name = "VOUT1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/lp3943.txt b/kernel/Documentation/devicetree/bindings/mfd/lp3943.txt
new file mode 100644
index 000000000..e8591d6b1
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/lp3943.txt
@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+ - compatible: "ti,lp3943"
+ - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+ compatible = "ti,lp3943";
+ reg = <0x60>;
+
+ gpioex: gpio {
+ compatible = "ti,lp3943-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pwm3943: pwm {
+ compatible = "ti,lp3943-pwm";
+ #pwm-cells = <2>;
+ ti,pwm0 = <8 9 10>;
+ ti,pwm1 = <15>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/max14577.txt b/kernel/Documentation/devicetree/bindings/mfd/max14577.txt
new file mode 100644
index 000000000..236264c10
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -0,0 +1,146 @@
+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent : The parent interrupt controller.
+
+
+Required nodes:
+ - charger :
+ Node for configuring the charger driver.
+ Required properties:
+ - compatible : "maxim,max14577-charger"
+ or "maxim,max77836-charger"
+ - maxim,fast-charge-uamp : Current in uA for Fast Charge;
+ Valid values:
+ - for max14577: 90000 - 950000;
+ - for max77836: 45000 - 475000;
+ - maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
+ Valid values:
+ - for max14577: 50000 - 200000;
+ - for max77836: 5000 - 100000;
+ - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
+ In an overvoltage condition, INT asserts and charging
+ stops. Valid values:
+ - 6000000, 6500000, 7000000, 7500000;
+ - maxim,constant-uvolt : Battery Constant Voltage in uV;
+ Valid values:
+ - 4000000 - 4280000 (step by 20000);
+ - 4350000;
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+ Node used only by extcon consumers.
+ Required properties:
+ - compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+ Required properties:
+ - compatible : "maxim,max14577-regulator"
+ or "maxim,max77836-regulator"
+
+ May contain a sub-node per regulator from the list below. Each
+ sub-node should contain the constraints and initialization information
+ for that regulator. See regulator.txt for a description of standard
+ properties for these sub-nodes.
+
+ List of valid regulator names:
+ - for max14577: CHARGER, SAFEOUT.
+ - for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+ The SAFEOUT is a fixed voltage regulator so there is no need to specify
+ voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+ compatible = "maxim,max14577";
+ reg = <0x25>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 IRQ_TYPE_NONE>;
+
+ muic: max14577-muic {
+ compatible = "maxim,max14577-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max14577-regulator";
+
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <90000>;
+ regulator-max-microamp = <950000>;
+ regulator-boot-on;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max14577-charger";
+
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <450000>;
+ maxim,eoc-uamp = <50000>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+};
+
+
+max77836@25 {
+ compatible = "maxim,max77836";
+ reg = <0x25>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 IRQ_TYPE_NONE>;
+
+ muic: max77836-muic {
+ compatible = "maxim,max77836-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77836-regulator";
+
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <90000>;
+ regulator-max-microamp = <950000>;
+ regulator-boot-on;
+ };
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77836-charger";
+
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <225000>;
+ maxim,eoc-uamp = <7500>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/max77686.txt b/kernel/Documentation/devicetree/bindings/mfd/max77686.txt
new file mode 100644
index 000000000..e39f0bc1f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -0,0 +1,82 @@
+Maxim MAX77686 multi-function device
+
+MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
+interfaced to host controller using i2c interface. PMIC and Charger submodules
+are addressed using same i2c slave address whereas RTC submodule uses
+different i2c slave address,presently for which we are statically creating i2c
+client while probing.This document describes the binding for mfd device and
+PMIC submodule.
+
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max77686.txt file.
+
+Required properties:
+- compatible : Must be "maxim,max77686";
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator-compatible property of regulator should initialized with string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+ LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+ control. To turn this feature on this property must be added to the regulator
+ sub-node:
+ - maxim,ena-gpios : one GPIO specifier enable control (the gpio
+ flags are actually ignored and always
+ ACTIVE_HIGH is used)
+
+Example:
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg {
+ regulator-compatible = "LDO11";
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg {
+ regulator-compatible = "BUCK9";
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+ };
+ }
diff --git a/kernel/Documentation/devicetree/bindings/mfd/max77693.txt b/kernel/Documentation/devicetree/bindings/mfd/max77693.txt
new file mode 100644
index 000000000..38e64405e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -0,0 +1,121 @@
+Maxim MAX77693 multi-function device
+
+MAX77693 is a Multifunction device with the following submodules:
+- PMIC,
+- CHARGER,
+- LED,
+- MUIC,
+- HAPTIC
+
+It is interfaced to host controller using i2c.
+This document describes the bindings for the mfd device.
+
+Required properties:
+- compatible : Must be "maxim,max77693".
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional properties:
+- regulators : The regulators of max77693 have to be instantiated under subnod
+ named "regulators" using the following format.
+
+ regulators {
+ regualtor-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
+ standard regulator constratints[*].
+ };
+
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
+ users with tactile feedback. PWM period and duty-cycle are varied in
+ order to provide the approprite level of feedback.
+
+ Required properties:
+ - compatible : Must be "maxim,max77693-hpatic"
+ - haptic-supply : power supply for the haptic motor
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+ - pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+ PWM properties should be named "pwms". And number of cell is different
+ for each pwm device.
+ To get more informations, please refer to documentaion.
+ [*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+
+- charger : Node configuring the charger driver.
+ If present, required properties:
+ - compatible : Must be "maxim,max77693-charger".
+
+ Optional properties (if not set, defaults will be used):
+ - maxim,constant-microvolt : Battery constant voltage in uV. The charger
+ will operate in fast charge constant current mode till battery voltage
+ reaches this level. Then the charger will switch to fast charge constant
+ voltage mode. Also vsys (system voltage) will be set to this value when
+ DC power is supplied but charger is not enabled.
+ Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+ Default: 4200000
+
+ - maxim,min-system-microvolt : Minimal system voltage in uV.
+ Valid values: 3000000 - 3700000, step by 100000 (rounded down)
+ Default: 3600000
+
+ - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
+ high temperature charging mode. If die temperature exceeds this value
+ the charging current will be reduced by 105 mA/Celsius.
+ Valid values: 70, 85, 100, 115
+ Default: 100
+
+ - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
+ in uA (current from battery to system).
+ Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+ Default: 3500000
+
+ - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
+ triggering input voltage regulation loop. If input voltage decreases
+ below this value, the input current will be reduced to reach the
+ threshold voltage.
+ Valid values: 4300000, 4700000, 4800000, 4900000
+ Default: 4300000
+
+Example:
+ max77693@66 {
+ compatible = "maxim,max77693";
+ reg = <0x66>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 2>;
+
+ regulators {
+ esafeout@1 {
+ regulator-compatible = "ESAFEOUT1";
+ regulator-name = "ESAFEOUT1";
+ regulator-boot-on;
+ };
+ esafeout@2 {
+ regulator-compatible = "ESAFEOUT2";
+ regulator-name = "ESAFEOUT2";
+ };
+ charger@0 {
+ regulator-compatible = "CHARGER";
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ regulator-boot-on;
+ };
+ };
+
+ haptic {
+ compatible = "maxim,max77693-haptic";
+ haptic-supply = <&haptic_supply>;
+ pwms = <&pwm 0 40000 0>;
+ pwm-names = "haptic";
+ };
+
+ charger {
+ compatible = "maxim,max77693-charger";
+
+ maxim,constant-microvolt = <4200000>;
+ maxim,min-system-microvolt = <3600000>;
+ maxim,thermal-regulation-celsius = <75>;
+ maxim,battery-overcurrent-microamp = <3000000>;
+ maxim,charge-input-threshold-microvolt = <4300000>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/max8925.txt b/kernel/Documentation/devicetree/bindings/mfd/max8925.txt
new file mode 100644
index 000000000..4f0dc6638
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/max8925.txt
@@ -0,0 +1,64 @@
+* Maxim max8925 Power Management IC
+
+Required parent device properties:
+- compatible : "maxim,max8925"
+- reg : the I2C slave address for the max8925 chip
+- interrupts : IRQ line for the max8925 chip
+- interrupt-controller: describes the max8925 as an interrupt
+ controller (has its own domain)
+- #interrupt-cells : should be 1.
+ - The cell is the max8925 local IRQ number
+
+Optional parent device properties:
+- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in
+ interrupts property, the other is indicated here.
+
+max8925 consists of a large and varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+max8925-onkey : : On key
+max8925-rtc : : RTC
+max8925-regulator : : Regulators
+max8925-backlight : : Backlight
+max8925-touch : : Touchscreen
+max8925-power : : Charger
+
+Example:
+
+ pmic: max8925@3c {
+ compatible = "maxim,max8925";
+ reg = <0x3c>;
+ interrupts = <1>;
+ interrupt-parent = <&intcmux4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ maxim,tsc-irq = <0>;
+
+ regulators {
+ SDV1 {
+ regulator-min-microvolt = <637500>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ };
+ backlight {
+ maxim,max8925-dual-string = <0>;
+ };
+ charger {
+ batt-detect = <0>;
+ topoff-threshold = <1>;
+ fast-charge = <7>;
+ no-temp-support = <0>;
+ no-insert-detect = <0>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/max8998.txt b/kernel/Documentation/devicetree/bindings/mfd/max8998.txt
new file mode 100644
index 000000000..23a3650ff
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -0,0 +1,119 @@
+* Maxim MAX8998, National/TI LP3974 multi-function device
+
+The Maxim MAX8998 is a multi-function device which includes voltage/current
+regulators, real time clock, battery charging controller and several
+other sub-blocks. It is interfaced using an I2C interface. Each sub-block
+is addressed by the host system using different i2c slave address.
+
+PMIC sub-block
+--------------
+
+The PMIC sub-block contains a number of voltage and current regulators,
+with controllable parameters and dynamic voltage scaling capability.
+In addition, it includes a real time clock and battery charging controller
+as well. It is accessible at I2C address 0x66.
+
+Required properties:
+- compatible: Should be one of the following:
+ - "maxim,max8998" for Maxim MAX8998
+ - "national,lp3974" or "ti,lp3974" for National/TI LP3974.
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from MAX8998 are routed to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for main interrupt.
+ - Second interrupt specifier is for power-on/-off interrupt.
+- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
+ for buck 1 dvs. The format of the gpio specifier depends on the gpio
+ controller.
+- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
+ for buck 2 dvs. The format of the gpio specifier depends on the gpio
+ controller.
+- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
+ the possible 4 options selectable by the dvs gpios. The value of this
+ property should be 0, 1, 2 or 3. If not specified or out of range,
+ a default value of 0 is taken.
+- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
+ the possible 2 options selectable by the dvs gpios. The value of this
+ property should be 0 or 1. If not specified or out of range, a default
+ value of 0 is taken.
+- max8998,pmic-buck-voltage-lock: If present, disallows changing of
+ preprogrammed buck dvfs voltages.
+
+Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
+- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
+ for buck1 regulator that can be selected using dvs gpio.
+
+Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
+- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
+ for buck2 regulator that can be selected using dvs gpio.
+
+Regulators: All the regulators of MAX8998 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+ regulator-name {
+ /* standard regulator bindings here */
+ };
+
+Following regulators of the MAX8998 PMIC block are supported. Note that
+the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK
+number as described in MAX8998 datasheet.
+
+ - LDOn
+ - valid values for n are 2 to 17
+ - Example: LDO2, LDO10, LDO17
+ - BUCKn
+ - valid values for n are 1 to 4.
+ - Example: BUCK1, BUCK2, BUCK3, BUCK4
+
+ - ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+ voltage type regulator
+
+ - ESAFEOUT1: (ldo19)
+ - ESAFEOUT2: (ld020)
+
+Standard regulator bindings are used inside regulator subnodes. Check
+ Documentation/devicetree/bindings/regulator/regulator.txt
+for more details.
+
+Example:
+
+ pmic@66 {
+ compatible = "maxim,max8998-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <4 0>, <3 0>;
+
+ /* Buck 1 DVS settings */
+ max8998,pmic-buck1-default-dvs-idx = <0>;
+ max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+ <&gpx0 1 1 0 0>; /* SET2 */
+ max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+ <1000000>, <950000>;
+
+ /* Buck 2 DVS settings */
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
+ max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
+
+ /* Regulators to instantiate */
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_ARM_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/kernel/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 000000000..8aba48821
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,158 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- codec: Contain the Audio Codec node.
+ - adc-port: Contain PMIC SSI port number used for ADC.
+ - dac-port: Contain PMIC SSI port number used for DAC.
+- leds : Contain the led nodes and initial register values in property
+ "led-control". Number of register depends of used IC, for MC13783 is 6,
+ for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
+ these registers.
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+ Each led node should contain "reg", which used as LED ID (described below).
+ Optional properties "label" and "linux,default-trigger" is described in
+ Documentation/devicetree/bindings/leds/common.txt.
+- regulators : Contain the regulator nodes. The regulators are bound using
+ their names as listed below with their registers and bits for enabling.
+
+MC13783 LED IDs:
+ 0 : Main display
+ 1 : AUX display
+ 2 : Keypad
+ 3 : Red 1
+ 4 : Green 1
+ 5 : Blue 1
+ 6 : Red 2
+ 7 : Green 2
+ 8 : Blue 2
+ 9 : Red 3
+ 10 : Green 3
+ 11 : Blue 3
+
+MC13892 LED IDs:
+ 0 : Main display
+ 1 : AUX display
+ 2 : Keypad
+ 3 : Red
+ 4 : Green
+ 5 : Blue
+
+MC34708 LED IDs:
+ 0 : Charger Red
+ 1 : Charger Green
+
+MC13783 regulators:
+ sw1a : regulator SW1A (register 24, bit 0)
+ sw1b : regulator SW1B (register 25, bit 0)
+ sw2a : regulator SW2A (register 26, bit 0)
+ sw2b : regulator SW2B (register 27, bit 0)
+ sw3 : regulator SW3 (register 29, bit 20)
+ vaudio : regulator VAUDIO (register 32, bit 0)
+ viohi : regulator VIOHI (register 32, bit 3)
+ violo : regulator VIOLO (register 32, bit 6)
+ vdig : regulator VDIG (register 32, bit 9)
+ vgen : regulator VGEN (register 32, bit 12)
+ vrfdig : regulator VRFDIG (register 32, bit 15)
+ vrfref : regulator VRFREF (register 32, bit 18)
+ vrfcp : regulator VRFCP (register 32, bit 21)
+ vsim : regulator VSIM (register 33, bit 0)
+ vesim : regulator VESIM (register 33, bit 3)
+ vcam : regulator VCAM (register 33, bit 6)
+ vrfbg : regulator VRFBG (register 33, bit 9)
+ vvib : regulator VVIB (register 33, bit 11)
+ vrf1 : regulator VRF1 (register 33, bit 12)
+ vrf2 : regulator VRF2 (register 33, bit 15)
+ vmmc1 : regulator VMMC1 (register 33, bit 18)
+ vmmc2 : regulator VMMC2 (register 33, bit 21)
+ gpo1 : regulator GPO1 (register 34, bit 6)
+ gpo2 : regulator GPO2 (register 34, bit 8)
+ gpo3 : regulator GPO3 (register 34, bit 10)
+ gpo4 : regulator GPO4 (register 34, bit 12)
+ pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
+ pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
+
+MC13892 regulators:
+ vcoincell : regulator VCOINCELL (register 13, bit 23)
+ sw1 : regulator SW1 (register 24, bit 0)
+ sw2 : regulator SW2 (register 25, bit 0)
+ sw3 : regulator SW3 (register 26, bit 0)
+ sw4 : regulator SW4 (register 27, bit 0)
+ swbst : regulator SWBST (register 29, bit 20)
+ vgen1 : regulator VGEN1 (register 32, bit 0)
+ viohi : regulator VIOHI (register 32, bit 3)
+ vdig : regulator VDIG (register 32, bit 9)
+ vgen2 : regulator VGEN2 (register 32, bit 12)
+ vpll : regulator VPLL (register 32, bit 15)
+ vusb2 : regulator VUSB2 (register 32, bit 18)
+ vgen3 : regulator VGEN3 (register 33, bit 0)
+ vcam : regulator VCAM (register 33, bit 6)
+ vvideo : regulator VVIDEO (register 33, bit 12)
+ vaudio : regulator VAUDIO (register 33, bit 15)
+ vsd : regulator VSD (register 33, bit 18)
+ gpo1 : regulator GPO1 (register 34, bit 6)
+ gpo2 : regulator GPO2 (register 34, bit 8)
+ gpo3 : regulator GPO3 (register 34, bit 10)
+ gpo4 : regulator GPO4 (register 34, bit 12)
+ pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
+ pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
+ vusb : regulator VUSB (register 50, bit 3)
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+ <&gpio4 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x000 0x000 0x0e0 0x000>;
+
+ sysled {
+ reg = <3>;
+ label = "system:red:live";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/mt6397.txt b/kernel/Documentation/devicetree/bindings/mfd/mt6397.txt
new file mode 100644
index 000000000..15043e652
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -0,0 +1,70 @@
+MediaTek MT6397 Multifunction Device Driver
+
+MT6397 is a multifunction device with the following sub modules:
+- Regulator
+- RTC
+- Audio codec
+- GPIO
+- Clock
+
+It is interfaced to host controller using SPI interface by a proprietary hardware
+called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap.
+See the following for pwarp node definitions:
+Documentation/devicetree/bindings/soc/pwrap.txt
+
+This document describes the binding for MFD device and its sub module.
+
+Required properties:
+compatible: "mediatek,mt6397"
+
+Optional subnodes:
+
+- rtc
+ Required properties:
+ - compatible: "mediatek,mt6397-rtc"
+- regulators
+ Required properties:
+ - compatible: "mediatek,mt6397-regulator"
+ see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+- codec
+ Required properties:
+ - compatible: "mediatek,mt6397-codec"
+- clk
+ Required properties:
+ - compatible: "mediatek,mt6397-clk"
+
+Example:
+ pwrap: pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+
+ ...
+
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ codec: mt6397codec {
+ compatible = "mediatek,mt6397-codec";
+ };
+
+ regulators {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/kernel/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
new file mode 100644
index 000000000..4721b2d52
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,103 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- num-ports: number of USB ports. Usually this is automatically detected
+ from the IP's revision register but can be overridden by specifying
+ this property. A maximum of 3 ports are supported at the moment.
+
+- portN-mode: String specifying the port mode for port N, where N can be
+ from 1 to 3. If the port mode is not specified, that port is treated
+ as unused. When specified, it must be one of the following.
+ "ehci-phy",
+ "ehci-tll",
+ "ehci-hsic",
+ "ohci-phy-6pin-datse0",
+ "ohci-phy-6pin-dpdm",
+ "ohci-phy-3pin-datse0",
+ "ohci-phy-4pin-dpdm",
+ "ohci-tll-6pin-datse0",
+ "ohci-tll-6pin-dpdm",
+ "ohci-tll-3pin-datse0",
+ "ohci-tll-4pin-dpdm",
+ "ohci-tll-2pin-datse0",
+ "ohci-tll-2pin-dpdm",
+
+- single-ulpi-bypass: Must be present if the controller contains a single
+ ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+
+- clock-names: should include:
+ For OMAP3
+ * "usbhost_120m_fck" - 120MHz Functional clock.
+
+ For OMAP4+
+ * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+ * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+ * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+ * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+ * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+ * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+ * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+ * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+ * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/omap-ehci.txt and
+omap3-ohci.txt
+
+Example for OMAP4:
+
+usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+ };
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+ port2-mode = "ehci-tll";
+ port3-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/kernel/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
new file mode 100644
index 000000000..c58d70437
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
@@ -0,0 +1,27 @@
+OMAP HS USB Host TLL (Transceiver-Less Interface)
+
+Required properties:
+
+- compatible : should be "ti,usbhs-tll"
+- reg : should contain one register range i.e. start and length
+- interrupts : should contain the TLL module's interrupt
+- ti,hwmod : must contain "usb_tll_hs"
+
+Optional properties:
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+
+- clock-names: should include:
+ * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
+ * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
+ * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
+
+Example:
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <78>;
+ ti,hwmods = "usb_tll_hs";
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/palmas.txt b/kernel/Documentation/devicetree/bindings/mfd/palmas.txt
new file mode 100644
index 000000000..eda898978
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -0,0 +1,53 @@
+* palmas device tree bindings
+
+The TI palmas family current members :-
+twl6035 (palmas)
+twl6037 (palmas)
+tps65913 (palmas)
+tps65914 (palmas)
+tps659038
+tps65917
+
+Required properties:
+- compatible : Should be from the list
+ ti,twl6035
+ ti,twl6036
+ ti,twl6037
+ ti,tps65913
+ ti,tps65914
+ ti,tps80036
+ ti,tps659038
+ ti,tps65917
+and also the generic series names
+ ti,palmas
+- interrupt-controller : palmas has its own internal IRQs
+- #interrupt-cells : should be set to 2 for IRQ number and flags
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
+- interrupt-parent : The parent interrupt controller.
+
+Optional properties:
+ ti,mux-padX : set the pad register X (1-2) to the correct muxing for the
+ hardware, if not set will use muxing in OTP.
+
+Example:
+
+palmas {
+ compatible = "ti,twl6035", "ti,palmas";
+ reg = <0x48>
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ti,mux-pad1 = <0>;
+ ti,mux-pad2 = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ ....
+ };
+}
diff --git a/kernel/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/kernel/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
new file mode 100644
index 000000000..6ac06c1b9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -0,0 +1,75 @@
+ Qualcomm SPMI PMICs multi-function device bindings
+
+The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
+PMICs. These PMICs use a QPNP scheme through SPMI interface.
+QPNP is effectively a partitioning scheme for dividing the SPMI extended
+register space up into logical pieces, and set of fixed register
+locations/definitions within these regions, with some of these regions
+specifically used for interrupt handling.
+
+The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
+interfaced to the chip via the SPMI (System Power Management Interface) bus.
+Support for multiple independent functions are implemented by splitting the
+16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
+each. A function can consume one or more of these fixed-size register regions.
+
+Required properties:
+- compatible: Should contain one of:
+ "qcom,pm8941",
+ "qcom,pm8841",
+ "qcom,pma8084",
+ "qcom,pm8019",
+ "qcom,pm8226",
+ "qcom,pm8110",
+ "qcom,pma8084",
+ "qcom,pmi8962",
+ "qcom,pmd9635",
+ "qcom,pm8994",
+ "qcom,pmi8994",
+ "qcom,pm8916",
+ "qcom,pm8004",
+ "qcom,pm8909",
+ or generalized "qcom,spmi-pmic".
+- reg: Specifies the SPMI USID slave address for this device.
+ For more information see:
+ Documentation/devicetree/bindings/spmi/spmi.txt
+
+Required properties for peripheral child nodes:
+- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
+
+Optional properties for peripheral child nodes:
+- interrupts: Interrupts are specified as a 4-tuple. For more information
+ see:
+ Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+- interrupt-names: Corresponding interrupt name to the interrupts property
+
+Each child node of SPMI slave id represents a function of the PMIC. In the
+example below the rtc device node represents a peripheral of pm8941
+SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
+
+Example:
+
+ spmi {
+ compatible = "qcom,spmi-pmic-arb";
+
+ pm8941@0 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+
+ rtc {
+ compatible = "qcom,rtc";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm";
+ };
+ };
+
+ pm8941@1 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+
+ regulator {
+ compatible = "qcom,regulator";
+ regulator-name = "8941_boost";
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/kernel/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
new file mode 100644
index 000000000..e90519d56
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
@@ -0,0 +1,22 @@
+QCOM Top Control and Status Register
+
+Qualcomm devices have a set of registers that provide various control and status
+functions for their peripherals. This node is intended to allow access to these
+registers via syscon.
+
+Required properties:
+- compatible: Should contain:
+ "qcom,tcsr-ipq8064", "syscon" for IPQ8064
+ "qcom,tcsr-apq8064", "syscon" for APQ8064
+ "qcom,tcsr-msm8660", "syscon" for MSM8660
+ "qcom,tcsr-msm8960", "syscon" for MSM8960
+ "qcom,tcsr-msm8974", "syscon" for MSM8974
+ "qcom,tcsr-apq8084", "syscon" for APQ8084
+ "qcom,tcsr-msm8916", "syscon" for MSM8916
+- reg: Address range for TCSR registers
+
+Example:
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-msm8960", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/kernel/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
new file mode 100644
index 000000000..f24f33409
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@@ -0,0 +1,97 @@
+Qualcomm PM8xxx PMIC multi-function devices
+
+The PM8xxx family of Power Management ICs are used to provide regulated
+voltages and other various functionality to Qualcomm SoCs.
+
+= PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8058"
+ "qcom,pm8921"
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: specifies the interrupt that indicates a subdevice
+ has generated an interrupt (summary interrupt). The
+ format of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+- #interrupt-cells:
+ Usage: required
+ Value type : <u32>
+ Definition: must be 2. Specifies the number of cells needed to encode
+ an interrupt source. The 1st cell contains the interrupt
+ number. The 2nd cell is the trigger type and level flags
+ encoded as follows:
+
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+- interrupt-controller:
+ Usage: required
+ Value type: <empty>
+ Definition: identifies this node as an interrupt controller
+
+= SUBCOMPONENTS
+
+The PMIC contains multiple independent functions, each described in a subnode.
+The below bindings specify the set of valid subnodes.
+
+== Real-Time Clock
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8058-rtc"
+ "qcom,pm8921-rtc"
+ "qcom,pm8941-rtc"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: single entry specifying the base address of the RTC registers
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: single entry specifying the RTC's alarm interrupt
+
+- allow-set-time:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the setting of RTC time is allowed by
+ the host CPU
+
+= EXAMPLE
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8921";
+ interrupts = <104 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts = <0x27 0>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/kernel/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
new file mode 100644
index 000000000..5e97a9593
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -0,0 +1,264 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+ "qcom,rpm-ipq8064"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of the RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the RPM:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBNODES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Regulators
+
+Regulator nodes are identified by their compatible:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-regulators"
+ "qcom,rpm-pm8901-regulators"
+ "qcom,rpm-pm8921-regulators"
+
+- vdd_l0_l1_lvs-supply:
+- vdd_l2_l11_l12-supply:
+- vdd_l3_l4_l5-supply:
+- vdd_l6_l7-supply:
+- vdd_l8-supply:
+- vdd_l9-supply:
+- vdd_l10-supply:
+- vdd_l13_l16-supply:
+- vdd_l14_l15-supply:
+- vdd_l17_l18-supply:
+- vdd_l19_l20-supply:
+- vdd_l21-supply:
+- vdd_l22-supply:
+- vdd_l23_l24_l25-supply:
+- vdd_ncp-supply:
+- vdd_s0-supply:
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+ Usage: optional (pm8058 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- lvs0_in-supply:
+- lvs1_in-supply:
+- lvs2_in-supply:
+- lvs3_in-supply:
+- mvs_in-supply:
+- vdd_l0-supply:
+- vdd_l1-supply:
+- vdd_l2-supply:
+- vdd_l3-supply:
+- vdd_l4-supply:
+- vdd_l5-supply:
+- vdd_l6-supply:
+- vdd_s0-supply:
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+ Usage: optional (pm8901 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_l1_l2_l12_l18-supply:
+- vdd_l3_l15_l17-supply:
+- vdd_l4_l14-supply:
+- vdd_l5_l8_l16-supply:
+- vdd_l6_l7-supply:
+- vdd_l9_l11-supply:
+- vdd_l10_l22-supply:
+- vdd_l21_l23_l29-supply:
+- vdd_l24-supply:
+- vdd_l25-supply:
+- vdd_l26-supply:
+- vdd_l27-supply:
+- vdd_l28-supply:
+- vdd_ncp-supply:
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vin_5vs-supply:
+- vin_lvs1_3_6-supply:
+- vin_lvs2-supply:
+- vin_lvs4_5_7-supply:
+ Usage: optional (pm8921 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+The regulator node houses sub-nodes for each regulator within the device. Each
+sub-node is identified using the node's name, with valid values listed for each
+of the pmics below.
+
+pm8058:
+ l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
+ l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
+ lvs0, lvs1, ncp
+
+pm8901:
+ l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
+ mvs
+
+pm8921:
+ s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
+ l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
+ ncp
+
+The content of each sub-node is defined by the standard binding for regulators -
+see regulator.txt - with additional custom properties described below:
+
+=== Switch-mode Power Supply regulator custom properties
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <u32>
+ Defintion: indicates that the regulator should be forced to a
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
+ select its own mode based on
+ realtime current draw, only for:
+ pm8921 smps and ftsmps
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: select that the power supply should operate in hysteretic
+ mode, instead of the default pwm mode
+
+=== Low-dropout regulator custom properties
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode:
+ Usage: optional
+ Value type: <u32>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode, valid values are:
+ QCOM_RPM_FORCE_MODE_NONE - do not force any mode
+ QCOM_RPM_FORCE_MODE_LPM - force into low power mode
+ QCOM_RPM_FORCE_MODE_HPM - force into high power mode
+ QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
+ mode, i.e. to act as a switch
+ and not regulate, only for:
+ pm8921 pldo, nldo and nldo1200
+
+=== Negative Charge Pump custom properties
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+= EXAMPLE
+
+ #include <dt-bindings/mfd/qcom-rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+ s1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+ };
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/mfd/qriox.txt b/kernel/Documentation/devicetree/bindings/mfd/qriox.txt
new file mode 100644
index 000000000..f301e2d4c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/qriox.txt
@@ -0,0 +1,17 @@
+KEYMILE qrio Board Control CPLD
+
+The qrio is a multifunction device that controls the KEYMILE boards based on
+the kmp204x design.
+It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable
+GPIO blocks.
+
+Required properties:
+- compatible: "keymile,qriox"
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+ board-control@1,0 {
+ compatible = "keymile,qriox";
+ reg = <1 0 0x80>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/rk808.txt b/kernel/Documentation/devicetree/bindings/mfd/rk808.txt
new file mode 100644
index 000000000..9e6e2592e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -0,0 +1,177 @@
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
+ outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+ default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+- vcc1-supply: The input supply for DCDC_REG1
+- vcc2-supply: The input supply for DCDC_REG2
+- vcc3-supply: The input supply for DCDC_REG3
+- vcc4-supply: The input supply for DCDC_REG4
+- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7
+- vcc8-supply: The input supply for SWITCH_REG1
+- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5
+- vcc10-supply: The input supply for LDO_REG6
+- vcc11-supply: The input supply for LDO_REG8
+- vcc12-supply: The input supply for SWITCH_REG2
+
+Regulators: All the regulators of RK808 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+ regulator-name {
+ /* standard regulator bindings here */
+ };
+
+Following regulators of the RK808 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK808 datasheet.
+
+ - DCDC_REGn
+ - valid values for n are 1 to 4.
+ - LDO_REGn
+ - valid values for n are 1 to 8.
+ - SWITCH_REGn
+ - valid values for n are 1 to 2
+
+Standard regulator bindings are used inside regulator subnodes. Check
+ Documentation/devicetree/bindings/regulator/regulator.txt
+for more details
+
+Example:
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ clock-output-names = "xin32k", "rk808-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ reg = <0x1b>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vccio_pmu>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd_arm";
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vccio_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt b/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt
new file mode 100644
index 000000000..937785a3e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -0,0 +1,36 @@
+* Ricoh RN5T618 PMIC
+
+Ricoh RN5T618 is a power management IC which integrates 3 step-down
+DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
+fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
+through a I2C interface.
+
+Required properties:
+ - compatible: should be "ricoh,rn5t618"
+ - reg: the I2C slave address of the device
+
+Sub-nodes:
+ - regulators: the node is required if the regulator functionality is
+ needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
+ LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+ The common bindings for each individual regulator can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+
+ regulators {
+ DCDC1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ DCDC2 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/kernel/Documentation/devicetree/bindings/mfd/s2mpa01.txt
new file mode 100644
index 000000000..c13d3d8c3
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/s2mpa01.txt
@@ -0,0 +1,90 @@
+
+* Samsung S2MPA01 Voltage and Current Regulator
+
+The Samsung S2MPA01 is a multi-function device which includes high
+efficiency buck converters including Dual-Phase buck converter, various LDOs,
+and an RTC. It is interfaced to the host controller using an I2C interface.
+Each sub-block is addressed by the host system using different I2C slave
+addresses.
+
+Required properties:
+- compatible: Should be "samsung,s2mpa01-pmic".
+- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s2mpa01 are delivered to.
+- interrupts: An interrupt specifier for the sole interrupt generated by the
+ device.
+
+Optional nodes:
+- regulators: The regulators of s2mpa01 that have to be instantiated should be
+ included in a sub-node named 'regulators'. Regulator nodes and constraints
+ included in this sub-node use the standard regulator bindings which are
+ documented elsewhere.
+
+Properties for BUCK regulator nodes:
+- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+ (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+ BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+ NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+ for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
+
+ The following BUCKs share ramp settings:
+ * 1 and 6
+ * 2 and 4
+ * 8, 9, and 10
+
+The following are the names of the regulators that the s2mpa01 PMIC block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mpa01.
+
+ - LDOn
+ - valid values for n are 1 to 26
+ - Example: LDO1, LD02, LDO26
+ - BUCKn
+ - valid values for n are 1 to 10.
+ - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+ s2mpa01_pmic@66 {
+ compatible = "samsung,s2mpa01-pmic";
+ reg = <0x66>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt b/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt
new file mode 100644
index 000000000..57a045016
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -0,0 +1,139 @@
+
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
+
+The Samsung S2MPS11 is a multi-function device which includes voltage and
+current regulators, RTC, charger controller and other sub-blocks. It is
+interfaced to the host controller using an I2C interface. Each sub-block is
+addressed by the host system using different I2C slave addresses.
+
+Required properties:
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+ or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
+- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s2mps11 are delivered to.
+- interrupts: Interrupt specifiers for interrupt sources.
+
+Optional nodes:
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+ KHz outputs, so to register these as clocks with common clock framework
+ instantiate a sub-node named "clocks". It uses the common clock binding
+ documented in :
+ [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+ The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
+ - #clock-cells: should be 1.
+
+ - The following is the list of clocks generated by the controller. Each clock
+ is assigned an identifier and client nodes use this identifier to specify
+ the clock which they consume.
+ Clock ID Devices
+ ----------------------------------------------------------
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
+
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
+
+- regulators: The regulators of s2mps11 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ [standard regulator constraints....];
+ };
+
+ regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
+
+ BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
+ regulator-ramp-delay = <0> can be used for them to disable ramp delay.
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
+Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
+BUCK[3, 4], and BUCK[7, 8, 10]
+
+On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
+over GPIO. To turn this feature on this property must be added to the regulator
+sub-node:
+ - samsung,ext-control-gpios: GPIO specifier for one GPIO
+ controlling this regulator (enable/disable);
+Example:
+ LDO12 {
+ regulator-name = "V_EMMC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+
+The regulator constraints inside the regulator nodes use the standard regulator
+bindings which are documented elsewhere.
+
+The following are the names of the regulators that the s2mps11 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mps11.
+
+ - LDOn
+ - valid values for n are:
+ - S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
+ - S2MPS14: 1 to 25
+ - S2MPU02: 1 to 28
+ - Example: LDO1, LDO2, LDO28
+ - BUCKn
+ - valid values for n are:
+ - S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
+ - S2MPS14: 1 to 5
+ - S2MPU02: 1 to 7
+ - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ s2m_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "xx", "yy", "zz";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt b/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 000000000..35181794a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,35 @@
+SKY81452 bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452"
+- reg : I2C slave address
+
+Required child nodes:
+- backlight : container node for backlight following the binding
+ in video/backlight/sky81452-backlight.txt
+- regulator : container node for regulators following the binding
+ in regulator/sky81452-regulator.txt
+
+Example:
+
+ sky81452@2c {
+ compatible = "skyworks,sky81452";
+ reg = <0x2c>;
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ led-sources = <0 1 2 3 6>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,current-limit = <2300>;
+ };
+
+ regulator {
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/stmpe.txt b/kernel/Documentation/devicetree/bindings/mfd/stmpe.txt
new file mode 100644
index 000000000..3fb68bfef
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -0,0 +1,29 @@
+* ST Microelectronics STMPE Multi-Functional Device
+
+STMPE is an MFD device which may expose the following inbuilt devices: gpio,
+keypad, touchscreen, adc, pwm, rotator.
+
+Required properties:
+ - compatible : "st,stmpe[610|801|811|1601|2401|2403]"
+ - reg : I2C/SPI address of the device
+
+Optional properties:
+ - interrupts : The interrupt outputs from the controller
+ - interrupt-controller : Marks the device node as an interrupt controller
+ - interrupt-parent : Specifies which IRQ controller we're connected to
+ - wakeup-source : Marks the input device as wakable
+ - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio : If present, which GPIO to use for event IRQ
+
+Example:
+
+ stmpe1601: stmpe1601@40 {
+ compatible = "st,stmpe1601";
+ reg = <0x40>;
+ interrupts = <26 0x4>;
+ interrupt-parent = <&gpio6>;
+ interrupt-controller;
+
+ wakeup-source;
+ st,autosleep-timeout = <1024>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/kernel/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
new file mode 100644
index 000000000..03c5a551d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -0,0 +1,59 @@
+* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
+
+PRCM is an MFD device exposing several Power Management related devices
+(like clks and reset controllers).
+
+Required properties:
+ - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
+ - reg: The PRCM registers range
+
+The prcm node may contain several subdevices definitions:
+ - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ controller devices
+
+
+Example:
+
+ prcm: prcm@01f01400 {
+ compatible = "allwinner,sun6i-a31-prcm";
+ reg = <0x01f01400 0x200>;
+
+ /* Put subdevices here */
+ ar100: ar100_clk {
+ compatible = "allwinner,sun6i-a31-ar100-clk";
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ };
+
+ ahb0: ahb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&ar100_div>;
+ clock-output-names = "ahb0";
+ };
+
+ apb0: apb0_clk {
+ compatible = "allwinner,sun6i-a31-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahb0>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: apb0_gates_clk {
+ compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_pio", "apb0_ir",
+ "apb0_timer01", "apb0_p2wi",
+ "apb0_uart", "apb0_1wire",
+ "apb0_i2c";
+ };
+
+ apb0_rst: apb0_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/syscon.txt b/kernel/Documentation/devicetree/bindings/mfd/syscon.txt
new file mode 100644
index 000000000..fe8150bb3
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -0,0 +1,20 @@
+* System Controller Registers R/W driver
+
+System controller node represents a register region containing a set
+of miscellaneous registers. The registers are not cohesive enough to
+represent as any specific type of device. The typical use-case is for
+some other node's driver, or platform-specific code, to acquire a
+reference to the syscon node (e.g. by phandle, node path, or search
+using a specific compatible value), interrogate the node (or associated
+OS driver) to determine the location of the registers, and access the
+registers directly.
+
+Required properties:
+- compatible: Should contain "syscon".
+- reg: the register region can be accessed from syscon
+
+Examples:
+gpr: iomuxc-gpr@020e0000 {
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e0000 0x38>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt b/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt
new file mode 100644
index 000000000..6fcedba46
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+ "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+ TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+ This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+ (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+ TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+ in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+ flags are valid:
+ - IRQ_TYPE_LEVEL_LOW
+ - IRQ_TYPE_LEVEL_HIGH
+ - IRQ_TYPE_EDGE_RISING
+ - IRQ_TYPE_EDGE_FALLING
+ - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+ GPIO controller, the second cell is the flags.
+
+- Keypad
+ This keypad is the same on all variants, supporting up to 96 different
+ keys. The linux-specific properties are modeled on those already existing
+ in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+ bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+ compatible = "toshiba,tc35893";
+ reg = <0x44>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ tc3589x_gpio {
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/kernel/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 000000000..20963c76b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible: "ti,keystone-devctrl", "syscon"
+
+- reg: contains offset/length value for device state control
+ registers space.
+
+Example:
+
+devctrl: device-state-control@0x02620000 {
+ compatible = "ti,keystone-devctrl", "syscon";
+ reg = <0x02620000 0x1000>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100755
index 000000000..8fffa3c5e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the
+ given device need to be present. The definition for each of these nodes
+ is defined using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+ These entries are required if regulators are enabled for a device.
+ Missing of these properties can cause the regulator registration
+ fails.
+ If some of input supply is powered through battery or always-on
+ supply then also it is require to have these parameters with proper
+ node handle of always on power supply.
+ tps6507x:
+ vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+ vindcdc3-supply : VDCDC3 input.
+ vldo1_2-supply : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+ 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+ 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps6507x@48 {
+ compatible = "ti,tps6507x";
+ reg = <0x48>;
+
+ vindcdc1_2-supply = <&vbat>;
+ vindcdc3-supply = <...>;
+ vinldo1_2-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdcdc1_reg: regulator@0 {
+ regulator-compatible = "VDCDC1";
+ reg = <0>;
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdcdc2_reg: regulator@1 {
+ regulator-compatible = "VDCDC2";
+ reg = <1>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ vdcdc3_reg: regulator@2 {
+ regulator-compatible = "VDCDC3";
+ reg = <2>;
+ regulator-min-microvolt = <950000>
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ ldo1_reg: regulator@3 {
+ regulator-compatible = "LDO1";
+ reg = <3>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2_reg: regulator@4 {
+ regulator-compatible = "LDO2";
+ reg = <4>;
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/tps65910.txt b/kernel/Documentation/devicetree/bindings/mfd/tps65910.txt
new file mode 100644
index 000000000..38833e63a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -0,0 +1,201 @@
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+ vaux2, vaux33, vmmc, vbb
+ tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+ ldo6, ldo7, ldo8
+
+- xxx-supply: Input voltage supply regulator.
+ These entries are require if regulators are enabled for a device. Missing of these
+ properties can cause the regulator registration fails.
+ If some of input supply is powered through battery or always-on supply then
+ also it is require to have these parameters with proper node handle of always
+ on power supply.
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC and VBB input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+ in TPS6591X datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+ There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+ the system power.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+ control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps65910@d2 {
+ compatible = "ti,tps65910";
+ reg = <0xd2>;
+ interrupt-parent = <&intc>;
+ interrupts = < 0 118 0x04 >;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ ti,vmbch-threshold = 0;
+ ti,vmbch2-threshold = 0;
+ ti,en-ck32k-xtal;
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+ vcc1-supply = <&reg_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <...>;
+ vcc4-supply = <...>;
+ vcc5-supply = <...>;
+ vcc6-supply = <...>;
+ vcc7-supply = <...>;
+ vccio-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ regulator-compatible = "vdd1";
+ reg = <0>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vdd2_reg: regulator@1 {
+ regulator-compatible = "vdd2";
+ reg = <1>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <4>;
+ };
+ vddctrl_reg: regulator@2 {
+ regulator-compatible = "vddctrl";
+ reg = <2>;
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vio_reg: regulator@3 {
+ regulator-compatible = "vio";
+ reg = <3>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo1_reg: regulator@4 {
+ regulator-compatible = "ldo1";
+ reg = <4>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo2_reg: regulator@5 {
+ regulator-compatible = "ldo2";
+ reg = <5>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo3_reg: regulator@6 {
+ regulator-compatible = "ldo3";
+ reg = <6>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo4_reg: regulator@7 {
+ regulator-compatible = "ldo4";
+ reg = <7>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo5_reg: regulator@8 {
+ regulator-compatible = "ldo5";
+ reg = <8>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo6_reg: regulator@9 {
+ regulator-compatible = "ldo6";
+ reg = <9>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ ldo7_reg: regulator@10 {
+ regulator-compatible = "ldo7";
+ reg = <10>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ ldo8_reg: regulator@11 {
+ regulator-compatible = "ldo8";
+ reg = <11>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <1>;
+ };
+ };
+ };
diff --git a/kernel/Documentation/devicetree/bindings/mfd/twl-familly.txt b/kernel/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 000000000..a66fcf946
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+ For Integrated power-management/audio CODEC device used in OMAP3
+ based boards
+- compatible : Must be "ti,twl6030";
+ For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+ that support a different number of features.
+ The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/kernel/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
new file mode 100644
index 000000000..414d2ae0a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family (twl4030) audio module
+
+The audio module inside the TWL family consist of an audio codec and a vibra
+driver.
+
+Required properties:
+- compatible : must be "ti,twl4030-audio"
+
+Optional properties, nodes:
+
+Audio functionality:
+- codec { }: Need to be present if the audio functionality is used. Within this
+ section the following options can be used:
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+ from the start of the recorded sample (in ms)
+-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+-ti,hs_extmute: Use external mute for HS pop reduction
+-ti,hs_extmute_gpio: Use external GPIO to control the external mute
+-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+ valid values.
+
+Vibra functionality
+- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
+ missing or it is 0, the vibra functionality is disabled.
+
+Example:
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+
+ ti,enable-vibra = <1>;
+
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt
new file mode 100644
index 000000000..3d1996331
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -0,0 +1,48 @@
+Texas Instruments TWL family (twl4030) reset and power management module
+
+The power management module inside the TWL family provides several facilities
+to control the power resources, including power scripts. For now, the
+binding only supports the complete shutdown of the system after poweroff.
+
+Required properties:
+- compatible : must be one of the following
+ "ti,twl4030-power"
+ "ti,twl4030-power-reset"
+ "ti,twl4030-power-idle"
+ "ti,twl4030-power-idle-osc-off"
+
+The use of ti,twl4030-power-reset is recommended at least on
+3530 that needs a special configuration for warm reset to work.
+
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
+When using ti,twl4030-power-idle-osc-off, the TI recommended
+configuration is used with the external oscillator being shut
+down during off-idle. Note that this does not work on all boards
+depending on how the external oscillator is wired.
+
+Optional properties:
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+ power supply master of the system. With this flag, the chip will
+ initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+ system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
+
+Example:
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_power: power {
+ compatible = "ti,twl4030-power";
+ ti,use_poweroff;
+ };
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/mfd/twl6040.txt b/kernel/Documentation/devicetree/bindings/mfd/twl6040.txt
new file mode 100644
index 000000000..a41157b5d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -0,0 +1,67 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
+vibra and GPO functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- gpio-controller:
+- #gpio-cells = <1>: twl6040 provides GPO lines.
+- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+- clocks: phandle to the clk32k clock provider
+- clock-names: Must be "clk32k"
+
+Vibra functionality
+Required properties:
+- vddvibl-supply: Regulator for the left vibra motor
+- vddvibr-supply: Regulator for the right vibra motor
+- vibra { }: Configuration section for vibra parameters containing the following
+ properties:
+- ti,vibldrv-res: Resistance parameter for left driver
+- ti,vibrdrv-res: Resistance parameter for right driver
+- ti,viblmotor-res: Resistance parameter for left motor
+- ti,viblmotor-res: Resistance parameter for right motor
+
+Optional properties within vibra { } section:
+- vddvibl_uV: If the vddvibl default voltage need to be changed
+- vddvibr_uV: If the vddvibr default voltage need to be changed
+
+Example:
+&i2c1 {
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+ twl6040,audpwron-gpio = <&gpio4 31 0>;
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
+};
+
+/include/ "twl6040.dtsi"