diff options
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt')
-rw-r--r-- | kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt | 83 |
1 files changed, 0 insertions, 83 deletions
diff --git a/kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt deleted file mode 100644 index e75f0e549..000000000 --- a/kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ /dev/null @@ -1,83 +0,0 @@ -Freescale i.MX DRM master device -================================ - -The freescale i.MX DRM master device is a virtual device needed to list all -IPU or other display interface nodes that comprise the graphics subsystem. - -Required properties: -- compatible: Should be "fsl,imx-display-subsystem" -- ports: Should contain a list of phandles pointing to display interface ports - of IPU devices - -example: - -display-subsystem { - compatible = "fsl,display-subsystem"; - ports = <&ipu_di0>; -}; - - -Freescale i.MX IPUv3 -==================== - -Required properties: -- compatible: Should be "fsl,<chip>-ipu" -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain sync interrupt and error interrupt, - in this order. -- resets: phandle pointing to the system reset controller and - reset line index, see reset/fsl,imx-src.txt for details -Optional properties: -- port@[0-3]: Port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - Ports 0 and 1 should correspond to CSI0 and CSI1, - ports 2 and 3 should correspond to DI0 and DI1, respectively. - -example: - -ipu: ipu@18000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x080000000>; - interrupts = <11 10>; - resets = <&src 2>; - - ipu_di0: port@2 { - reg = <2>; - - ipu_di0_disp0: endpoint { - remote-endpoint = <&display_in>; - }; - }; -}; - -Parallel display support -======================== - -Required properties: -- compatible: Should be "fsl,imx-parallel-display" -Optional properties: -- interface_pix_fmt: How this display is connected to the - display interface. Currently supported types: "rgb24", "rgb565", "bgr666" - and "lvds666". -- edid: verbatim EDID data block describing attached display. -- ddc: phandle describing the i2c bus handling the display data - channel -- port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -example: - -display@di0 { - compatible = "fsl,imx-parallel-display"; - edid = [edid-data]; - interface-pix-fmt = "rgb24"; - - port { - display_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; - }; - }; -}; |