1 files changed, 53 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/kernel/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
new file mode 100644
index 000000000..4fc869b69
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt
@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+  - hclk: AHB bus clock of the Audio Subsystem.
+  - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+    not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+    a clock named "xxti".
+  - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+  - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+    specified, it is fixed to a clock named "iiscdclk0".
+  - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+  "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+	clk_audss: clock-controller@c0900000 {
+		compatible = "samsung,s5pv210-audss-clock";
+		reg = <0xc0900000 0x1000>;
+		#clock-cells = <1>;
+		clock-names = "hclk", "xxti",
+				"fout_epll", "sclk_audio0";
+		clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+	};
+
+Example: I2S controller node that consumes the clock generated by the clock
+	 controller. Refer to the standard clock bindings for information
+         about 'clocks' and 'clock-names' property.
+
+	i2s0: i2s@03830000 {
+		/* ... */
+		clock-names = "iis", "i2s_opclk0",
+				"i2s_opclk1";
+		clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+				<&clk_audss CLK_DOUT_AUD_BUS>;
+		/* ... */
+	};