summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/c6x
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/c6x')
-rw-r--r--kernel/Documentation/devicetree/bindings/c6x/interrupt.txt104
1 files changed, 0 insertions, 104 deletions
diff --git a/kernel/Documentation/devicetree/bindings/c6x/interrupt.txt b/kernel/Documentation/devicetree/bindings/c6x/interrupt.txt
deleted file mode 100644
index 42bb796cc..000000000
--- a/kernel/Documentation/devicetree/bindings/c6x/interrupt.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-C6X Interrupt Chips
--------------------
-
-* C64X+ Core Interrupt Controller
-
- The core interrupt controller provides 16 prioritized interrupts to the
- C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
- Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
- sources coming from outside the core.
-
- Required properties:
- --------------------
- - compatible: Should be "ti,c64x+core-pic";
- - #interrupt-cells: <1>
-
- Interrupt Specifier Definition
- ------------------------------
- Single cell specifying the core interrupt priority level (4-15) where
- 4 is highest priority and 15 is lowest priority.
-
- Example
- -------
- core_pic: interrupt-controller@0 {
- interrupt-controller;
- #interrupt-cells = <1>;
- compatible = "ti,c64x+core-pic";
- };
-
-
-
-* C64x+ Megamodule Interrupt Controller
-
- The megamodule PIC consists of four interrupt mupliplexers each of which
- combine up to 32 interrupt inputs into a single interrupt output which
- may be cascaded into the core interrupt controller. The megamodule PIC
- has a total of 12 outputs cascading into the core interrupt controller.
- One for each core interrupt priority level. In addition to the combined
- interrupt sources, individual megamodule interrupts may be cascaded to
- the core interrupt controller. When an individual interrupt is cascaded,
- it is no longer handled through a megamodule interrupt combiner and is
- considered to have the core interrupt controller as the parent.
-
- Required properties:
- --------------------
- - compatible: "ti,c64x+megamod-pic"
- - interrupt-controller
- - #interrupt-cells: <1>
- - reg: base address and size of register area
- - interrupt-parent: must be core interrupt controller
- - interrupts: This should have four cells; one for each interrupt combiner.
- The cells contain the core priority interrupt to which the
- corresponding combiner output is wired.
-
- Optional properties:
- --------------------
- - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core
- priority interrupts. The first cell corresponds to
- core priority 4 and the last cell corresponds to
- core priority 15. The value of each cell is the
- megamodule interrupt source which is MUXed to
- the core interrupt corresponding to the cell
- position. Allowed values are 4 - 127. Mapping for
- interrupts 0 - 3 (combined interrupt sources) are
- ignored.
-
- Interrupt Specifier Definition
- ------------------------------
- Single cell specifying the megamodule interrupt source (4-127). Note that
- interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will
- use the core interrupt controller as their parent and the specifier will
- be the core priority level, not the megamodule interrupt number.
-
- Examples
- --------
- megamod_pic: interrupt-controller@1800000 {
- compatible = "ti,c64x+megamod-pic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x1800000 0x1000>;
- interrupt-parent = <&core_pic>;
- interrupts = < 12 13 14 15 >;
- };
-
- This is a minimal example where all individual interrupts go through a
- combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped
- to interrupt 13, etc.
-
-
- megamod_pic: interrupt-controller@1800000 {
- compatible = "ti,c64x+megamod-pic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x1800000 0x1000>;
- interrupt-parent = <&core_pic>;
- interrupts = < 12 13 14 15 >;
- ti,c64x+megamod-pic-mux = < 0 0 0 0
- 32 0 0 0
- 0 0 0 0 >;
- };
-
- This the same as the first example except that megamodule interrupt 32 is
- mapped directly to core priority interrupt 8. The node using this interrupt
- must set the core controller as its interrupt parent and use 8 in the
- interrupt specifier value.