1 files changed, 0 insertions, 60 deletions
diff --git a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt
deleted file mode 100644
index 8b53273cb..000000000
--- a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Marvell MMP Interrupt controller
-
-Required properties:
-- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
-  "mrvl,mmp2-mux-intc"
-- reg : Address and length of the register set of the interrupt controller.
-  If the interrupt controller is intc, address and length means the range
-  of the whold interrupt controller. If the interrupt controller is mux-intc,
-  address and length means one register. Since address of mux-intc is in the
-  range of intc. mux-intc is secondary interrupt controller.
-- reg-names : Name of the register set of the interrupt controller. It's
-  only required in mux-intc interrupt controller.
-- interrupts : Should be the port interrupt shared by mux interrupts. It's
-  only required in mux-intc interrupt controller.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source.
-- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
-  controller.
-- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
-  detection first.
-
-Example:
-	intc: interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp2-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-		mrvl,intc-nr-irqs = <64>;
-	};
-
-	intcmux4@d4282150 {
-		compatible = "mrvl,mmp2-mux-intc";
-		interrupts = <4>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x150 0x4>, <0x168 0x4>;
-		reg-names = "mux status", "mux mask";
-		mrvl,intc-nr-irqs = <2>;
-	};
-
-* Marvell Orion Interrupt controller
-
-Required properties
-- compatible :  Should be "marvell,orion-intc".
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. Supported value is <1>.
-- interrupt-controller : Declare this node to be an interrupt controller.
-- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
-        One entry in the list represents 32 interrupts.
-
-Example:
-
-	intc: interrupt-controller {
-        	compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-                reg = <0xfed20204 0x04>,
-		      <0xfed20214 0x04>;
-        };