diff options
Diffstat (limited to 'kernel/Documentation/device-mapper')
23 files changed, 2739 insertions, 0 deletions
diff --git a/kernel/Documentation/device-mapper/cache-policies.txt b/kernel/Documentation/device-mapper/cache-policies.txt new file mode 100644 index 000000000..0d124a971 --- /dev/null +++ b/kernel/Documentation/device-mapper/cache-policies.txt @@ -0,0 +1,97 @@ +Guidance for writing policies +============================= + +Try to keep transactionality out of it. The core is careful to +avoid asking about anything that is migrating. This is a pain, but +makes it easier to write the policies. + +Mappings are loaded into the policy at construction time. + +Every bio that is mapped by the target is referred to the policy. +The policy can return a simple HIT or MISS or issue a migration. + +Currently there's no way for the policy to issue background work, +e.g. to start writing back dirty blocks that are going to be evicte +soon. + +Because we map bios, rather than requests it's easy for the policy +to get fooled by many small bios. For this reason the core target +issues periodic ticks to the policy. It's suggested that the policy +doesn't update states (eg, hit counts) for a block more than once +for each tick. The core ticks by watching bios complete, and so +trying to see when the io scheduler has let the ios run. + + +Overview of supplied cache replacement policies +=============================================== + +multiqueue +---------- + +This policy is the default. + +The multiqueue policy has three sets of 16 queues: one set for entries +waiting for the cache and another two for those in the cache (a set for +clean entries and a set for dirty entries). + +Cache entries in the queues are aged based on logical time. Entry into +the cache is based on variable thresholds and queue selection is based +on hit count on entry. The policy aims to take different cache miss +costs into account and to adjust to varying load patterns automatically. + +Message and constructor argument pairs are: + 'sequential_threshold <#nr_sequential_ios>' + 'random_threshold <#nr_random_ios>' + 'read_promote_adjustment <value>' + 'write_promote_adjustment <value>' + 'discard_promote_adjustment <value>' + +The sequential threshold indicates the number of contiguous I/Os +required before a stream is treated as sequential. Once a stream is +considered sequential it will bypass the cache. The random threshold +is the number of intervening non-contiguous I/Os that must be seen +before the stream is treated as random again. + +The sequential and random thresholds default to 512 and 4 respectively. + +Large, sequential I/Os are probably better left on the origin device +since spindles tend to have good sequential I/O bandwidth. The +io_tracker counts contiguous I/Os to try to spot when the I/O is in one +of these sequential modes. But there are use-cases for wanting to +promote sequential blocks to the cache (e.g. fast application startup). +If sequential threshold is set to 0 the sequential I/O detection is +disabled and sequential I/O will no longer implicitly bypass the cache. +Setting the random threshold to 0 does _not_ disable the random I/O +stream detection. + +Internally the mq policy determines a promotion threshold. If the hit +count of a block not in the cache goes above this threshold it gets +promoted to the cache. The read, write and discard promote adjustment +tunables allow you to tweak the promotion threshold by adding a small +value based on the io type. They default to 4, 8 and 1 respectively. +If you're trying to quickly warm a new cache device you may wish to +reduce these to encourage promotion. Remember to switch them back to +their defaults after the cache fills though. + +cleaner +------- + +The cleaner writes back all dirty blocks in a cache to decommission it. + +Examples +======== + +The syntax for a table is: + cache <metadata dev> <cache dev> <origin dev> <block size> + <#feature_args> [<feature arg>]* + <policy> <#policy_args> [<policy arg>]* + +The syntax to send a message using the dmsetup command is: + dmsetup message <mapped device> 0 sequential_threshold 1024 + dmsetup message <mapped device> 0 random_threshold 8 + +Using dmsetup: + dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \ + /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8" + creates a 128GB large mapped device named 'blah' with the + sequential threshold set to 1024 and the random_threshold set to 8. diff --git a/kernel/Documentation/device-mapper/cache.txt b/kernel/Documentation/device-mapper/cache.txt new file mode 100644 index 000000000..68c0f517c --- /dev/null +++ b/kernel/Documentation/device-mapper/cache.txt @@ -0,0 +1,298 @@ +Introduction +============ + +dm-cache is a device mapper target written by Joe Thornber, Heinz +Mauelshagen, and Mike Snitzer. + +It aims to improve performance of a block device (eg, a spindle) by +dynamically migrating some of its data to a faster, smaller device +(eg, an SSD). + +This device-mapper solution allows us to insert this caching at +different levels of the dm stack, for instance above the data device for +a thin-provisioning pool. Caching solutions that are integrated more +closely with the virtual memory system should give better performance. + +The target reuses the metadata library used in the thin-provisioning +library. + +The decision as to what data to migrate and when is left to a plug-in +policy module. Several of these have been written as we experiment, +and we hope other people will contribute others for specific io +scenarios (eg. a vm image server). + +Glossary +======== + + Migration - Movement of the primary copy of a logical block from one + device to the other. + Promotion - Migration from slow device to fast device. + Demotion - Migration from fast device to slow device. + +The origin device always contains a copy of the logical block, which +may be out of date or kept in sync with the copy on the cache device +(depending on policy). + +Design +====== + +Sub-devices +----------- + +The target is constructed by passing three devices to it (along with +other parameters detailed later): + +1. An origin device - the big, slow one. + +2. A cache device - the small, fast one. + +3. A small metadata device - records which blocks are in the cache, + which are dirty, and extra hints for use by the policy object. + This information could be put on the cache device, but having it + separate allows the volume manager to configure it differently, + e.g. as a mirror for extra robustness. This metadata device may only + be used by a single cache device. + +Fixed block size +---------------- + +The origin is divided up into blocks of a fixed size. This block size +is configurable when you first create the cache. Typically we've been +using block sizes of 256KB - 1024KB. The block size must be between 64 +(32KB) and 2097152 (1GB) and a multiple of 64 (32KB). + +Having a fixed block size simplifies the target a lot. But it is +something of a compromise. For instance, a small part of a block may be +getting hit a lot, yet the whole block will be promoted to the cache. +So large block sizes are bad because they waste cache space. And small +block sizes are bad because they increase the amount of metadata (both +in core and on disk). + +Cache operating modes +--------------------- + +The cache has three operating modes: writeback, writethrough and +passthrough. + +If writeback, the default, is selected then a write to a block that is +cached will go only to the cache and the block will be marked dirty in +the metadata. + +If writethrough is selected then a write to a cached block will not +complete until it has hit both the origin and cache devices. Clean +blocks should remain clean. + +If passthrough is selected, useful when the cache contents are not known +to be coherent with the origin device, then all reads are served from +the origin device (all reads miss the cache) and all writes are +forwarded to the origin device; additionally, write hits cause cache +block invalidates. To enable passthrough mode the cache must be clean. +Passthrough mode allows a cache device to be activated without having to +worry about coherency. Coherency that exists is maintained, although +the cache will gradually cool as writes take place. If the coherency of +the cache can later be verified, or established through use of the +"invalidate_cblocks" message, the cache device can be transitioned to +writethrough or writeback mode while still warm. Otherwise, the cache +contents can be discarded prior to transitioning to the desired +operating mode. + +A simple cleaner policy is provided, which will clean (write back) all +dirty blocks in a cache. Useful for decommissioning a cache or when +shrinking a cache. Shrinking the cache's fast device requires all cache +blocks, in the area of the cache being removed, to be clean. If the +area being removed from the cache still contains dirty blocks the resize +will fail. Care must be taken to never reduce the volume used for the +cache's fast device until the cache is clean. This is of particular +importance if writeback mode is used. Writethrough and passthrough +modes already maintain a clean cache. Future support to partially clean +the cache, above a specified threshold, will allow for keeping the cache +warm and in writeback mode during resize. + +Migration throttling +-------------------- + +Migrating data between the origin and cache device uses bandwidth. +The user can set a throttle to prevent more than a certain amount of +migration occurring at any one time. Currently we're not taking any +account of normal io traffic going to the devices. More work needs +doing here to avoid migrating during those peak io moments. + +For the time being, a message "migration_threshold <#sectors>" +can be used to set the maximum number of sectors being migrated, +the default being 204800 sectors (or 100MB). + +Updating on-disk metadata +------------------------- + +On-disk metadata is committed every time a FLUSH or FUA bio is written. +If no such requests are made then commits will occur every second. This +means the cache behaves like a physical disk that has a volatile write +cache. If power is lost you may lose some recent writes. The metadata +should always be consistent in spite of any crash. + +The 'dirty' state for a cache block changes far too frequently for us +to keep updating it on the fly. So we treat it as a hint. In normal +operation it will be written when the dm device is suspended. If the +system crashes all cache blocks will be assumed dirty when restarted. + +Per-block policy hints +---------------------- + +Policy plug-ins can store a chunk of data per cache block. It's up to +the policy how big this chunk is, but it should be kept small. Like the +dirty flags this data is lost if there's a crash so a safe fallback +value should always be possible. + +For instance, the 'mq' policy, which is currently the default policy, +uses this facility to store the hit count of the cache blocks. If +there's a crash this information will be lost, which means the cache +may be less efficient until those hit counts are regenerated. + +Policy hints affect performance, not correctness. + +Policy messaging +---------------- + +Policies will have different tunables, specific to each one, so we +need a generic way of getting and setting these. Device-mapper +messages are used. Refer to cache-policies.txt. + +Discard bitset resolution +------------------------- + +We can avoid copying data during migration if we know the block has +been discarded. A prime example of this is when mkfs discards the +whole block device. We store a bitset tracking the discard state of +blocks. However, we allow this bitset to have a different block size +from the cache blocks. This is because we need to track the discard +state for all of the origin device (compare with the dirty bitset +which is just for the smaller cache device). + +Target interface +================ + +Constructor +----------- + + cache <metadata dev> <cache dev> <origin dev> <block size> + <#feature args> [<feature arg>]* + <policy> <#policy args> [policy args]* + + metadata dev : fast device holding the persistent metadata + cache dev : fast device holding cached data blocks + origin dev : slow device holding original data blocks + block size : cache unit size in sectors + + #feature args : number of feature arguments passed + feature args : writethrough or passthrough (The default is writeback.) + + policy : the replacement policy to use + #policy args : an even number of arguments corresponding to + key/value pairs passed to the policy + policy args : key/value pairs passed to the policy + E.g. 'sequential_threshold 1024' + See cache-policies.txt for details. + +Optional feature arguments are: + writethrough : write through caching that prohibits cache block + content from being different from origin block content. + Without this argument, the default behaviour is to write + back cache block contents later for performance reasons, + so they may differ from the corresponding origin blocks. + + passthrough : a degraded mode useful for various cache coherency + situations (e.g., rolling back snapshots of + underlying storage). Reads and writes always go to + the origin. If a write goes to a cached origin + block, then the cache block is invalidated. + To enable passthrough mode the cache must be clean. + +A policy called 'default' is always registered. This is an alias for +the policy we currently think is giving best all round performance. + +As the default policy could vary between kernels, if you are relying on +the characteristics of a specific policy, always request it by name. + +Status +------ + +<metadata block size> <#used metadata blocks>/<#total metadata blocks> +<cache block size> <#used cache blocks>/<#total cache blocks> +<#read hits> <#read misses> <#write hits> <#write misses> +<#demotions> <#promotions> <#dirty> <#features> <features>* +<#core args> <core args>* <policy name> <#policy args> <policy args>* + +metadata block size : Fixed block size for each metadata block in + sectors +#used metadata blocks : Number of metadata blocks used +#total metadata blocks : Total number of metadata blocks +cache block size : Configurable block size for the cache device + in sectors +#used cache blocks : Number of blocks resident in the cache +#total cache blocks : Total number of cache blocks +#read hits : Number of times a READ bio has been mapped + to the cache +#read misses : Number of times a READ bio has been mapped + to the origin +#write hits : Number of times a WRITE bio has been mapped + to the cache +#write misses : Number of times a WRITE bio has been + mapped to the origin +#demotions : Number of times a block has been removed + from the cache +#promotions : Number of times a block has been moved to + the cache +#dirty : Number of blocks in the cache that differ + from the origin +#feature args : Number of feature args to follow +feature args : 'writethrough' (optional) +#core args : Number of core arguments (must be even) +core args : Key/value pairs for tuning the core + e.g. migration_threshold +policy name : Name of the policy +#policy args : Number of policy arguments to follow (must be even) +policy args : Key/value pairs + e.g. sequential_threshold + +Messages +-------- + +Policies will have different tunables, specific to each one, so we +need a generic way of getting and setting these. Device-mapper +messages are used. (A sysfs interface would also be possible.) + +The message format is: + + <key> <value> + +E.g. + dmsetup message my_cache 0 sequential_threshold 1024 + + +Invalidation is removing an entry from the cache without writing it +back. Cache blocks can be invalidated via the invalidate_cblocks +message, which takes an arbitrary number of cblock ranges. Each cblock +range's end value is "one past the end", meaning 5-10 expresses a range +of values from 5 to 9. Each cblock must be expressed as a decimal +value, in the future a variant message that takes cblock ranges +expressed in hexidecimal may be needed to better support efficient +invalidation of larger caches. The cache must be in passthrough mode +when invalidate_cblocks is used. + + invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]* + +E.g. + dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789 + +Examples +======== + +The test suite can be found here: + +https://github.com/jthornber/device-mapper-test-suite + +dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \ + /dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0' +dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \ + /dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \ + mq 4 sequential_threshold 1024 random_threshold 8' diff --git a/kernel/Documentation/device-mapper/delay.txt b/kernel/Documentation/device-mapper/delay.txt new file mode 100644 index 000000000..15adc5535 --- /dev/null +++ b/kernel/Documentation/device-mapper/delay.txt @@ -0,0 +1,26 @@ +dm-delay +======== + +Device-Mapper's "delay" target delays reads and/or writes +and maps them to different devices. + +Parameters: + <device> <offset> <delay> [<write_device> <write_offset> <write_delay>] + +With separate write parameters, the first set is only used for reads. +Delays are specified in milliseconds. + +Example scripts +=============== +[[ +#!/bin/sh +# Create device delaying rw operation for 500ms +echo "0 `blockdev --getsize $1` delay $1 0 500" | dmsetup create delayed +]] + +[[ +#!/bin/sh +# Create device delaying only write operation for 500ms and +# splitting reads and writes to different devices $1 $2 +echo "0 `blockdev --getsize $1` delay $1 0 0 $2 0 500" | dmsetup create delayed +]] diff --git a/kernel/Documentation/device-mapper/dm-crypt.txt b/kernel/Documentation/device-mapper/dm-crypt.txt new file mode 100644 index 000000000..692171fe9 --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-crypt.txt @@ -0,0 +1,96 @@ +dm-crypt +========= + +Device-Mapper's "crypt" target provides transparent encryption of block devices +using the kernel crypto API. + +For a more detailed description of supported parameters see: +https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt + +Parameters: <cipher> <key> <iv_offset> <device path> \ + <offset> [<#opt_params> <opt_params>] + +<cipher> + Encryption cipher and an optional IV generation mode. + (In format cipher[:keycount]-chainmode-ivmode[:ivopts]). + Examples: + des + aes-cbc-essiv:sha256 + twofish-ecb + + /proc/crypto contains supported crypto modes + +<key> + Key used for encryption. It is encoded as a hexadecimal number. + You can only use key sizes that are valid for the selected cipher + in combination with the selected iv mode. + Note that for some iv modes the key string can contain additional + keys (for example IV seed) so the key contains more parts concatenated + into a single string. + +<keycount> + Multi-key compatibility mode. You can define <keycount> keys and + then sectors are encrypted according to their offsets (sector 0 uses key0; + sector 1 uses key1 etc.). <keycount> must be a power of two. + +<iv_offset> + The IV offset is a sector count that is added to the sector number + before creating the IV. + +<device path> + This is the device that is going to be used as backend and contains the + encrypted data. You can specify it as a path like /dev/xxx or a device + number <major>:<minor>. + +<offset> + Starting sector within the device where the encrypted data begins. + +<#opt_params> + Number of optional parameters. If there are no optional parameters, + the optional paramaters section can be skipped or #opt_params can be zero. + Otherwise #opt_params is the number of following arguments. + + Example of optional parameters section: + 3 allow_discards same_cpu_crypt submit_from_crypt_cpus + +allow_discards + Block discard requests (a.k.a. TRIM) are passed through the crypt device. + The default is to ignore discard requests. + + WARNING: Assess the specific security risks carefully before enabling this + option. For example, allowing discards on encrypted devices may lead to + the leak of information about the ciphertext device (filesystem type, + used space etc.) if the discarded blocks can be located easily on the + device later. + +same_cpu_crypt + Perform encryption using the same cpu that IO was submitted on. + The default is to use an unbound workqueue so that encryption work + is automatically balanced between available CPUs. + +submit_from_crypt_cpus + Disable offloading writes to a separate thread after encryption. + There are some situations where offloading write bios from the + encryption threads to a single thread degrades performance + significantly. The default is to offload write bios to the same + thread because it benefits CFQ to have writes submitted using the + same context. + +Example scripts +=============== +LUKS (Linux Unified Key Setup) is now the preferred way to set up disk +encryption with dm-crypt using the 'cryptsetup' utility, see +https://gitlab.com/cryptsetup/cryptsetup + +[[ +#!/bin/sh +# Create a crypt device using dmsetup +dmsetup create crypt1 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0" +]] + +[[ +#!/bin/sh +# Create a crypt device using cryptsetup and LUKS header with default cipher +cryptsetup luksFormat $1 +cryptsetup luksOpen $1 crypt1 +]] diff --git a/kernel/Documentation/device-mapper/dm-flakey.txt b/kernel/Documentation/device-mapper/dm-flakey.txt new file mode 100644 index 000000000..6ff5c2327 --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-flakey.txt @@ -0,0 +1,53 @@ +dm-flakey +========= + +This target is the same as the linear target except that it exhibits +unreliable behaviour periodically. It's been found useful in simulating +failing devices for testing purposes. + +Starting from the time the table is loaded, the device is available for +<up interval> seconds, then exhibits unreliable behaviour for <down +interval> seconds, and then this cycle repeats. + +Also, consider using this in combination with the dm-delay target too, +which can delay reads and writes and/or send them to different +underlying devices. + +Table parameters +---------------- + <dev path> <offset> <up interval> <down interval> \ + [<num_features> [<feature arguments>]] + +Mandatory parameters: + <dev path>: Full pathname to the underlying block-device, or a + "major:minor" device-number. + <offset>: Starting sector within the device. + <up interval>: Number of seconds device is available. + <down interval>: Number of seconds device returns errors. + +Optional feature parameters: + If no feature parameters are present, during the periods of + unreliability, all I/O returns errors. + + drop_writes: + All write I/O is silently ignored. + Read I/O is handled correctly. + + corrupt_bio_byte <Nth_byte> <direction> <value> <flags>: + During <down interval>, replace <Nth_byte> of the data of + each matching bio with <value>. + + <Nth_byte>: The offset of the byte to replace. + Counting starts at 1, to replace the first byte. + <direction>: Either 'r' to corrupt reads or 'w' to corrupt writes. + 'w' is incompatible with drop_writes. + <value>: The value (from 0-255) to write. + <flags>: Perform the replacement only if bio->bi_rw has all the + selected flags set. + +Examples: + corrupt_bio_byte 32 r 1 0 + - replaces the 32nd byte of READ bios with the value 1 + + corrupt_bio_byte 224 w 0 32 + - replaces the 224th byte of REQ_META (=32) bios with the value 0 diff --git a/kernel/Documentation/device-mapper/dm-io.txt b/kernel/Documentation/device-mapper/dm-io.txt new file mode 100644 index 000000000..3b5d9a52c --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-io.txt @@ -0,0 +1,75 @@ +dm-io +===== + +Dm-io provides synchronous and asynchronous I/O services. There are three +types of I/O services available, and each type has a sync and an async +version. + +The user must set up an io_region structure to describe the desired location +of the I/O. Each io_region indicates a block-device along with the starting +sector and size of the region. + + struct io_region { + struct block_device *bdev; + sector_t sector; + sector_t count; + }; + +Dm-io can read from one io_region or write to one or more io_regions. Writes +to multiple regions are specified by an array of io_region structures. + +The first I/O service type takes a list of memory pages as the data buffer for +the I/O, along with an offset into the first page. + + struct page_list { + struct page_list *next; + struct page *page; + }; + + int dm_io_sync(unsigned int num_regions, struct io_region *where, int rw, + struct page_list *pl, unsigned int offset, + unsigned long *error_bits); + int dm_io_async(unsigned int num_regions, struct io_region *where, int rw, + struct page_list *pl, unsigned int offset, + io_notify_fn fn, void *context); + +The second I/O service type takes an array of bio vectors as the data buffer +for the I/O. This service can be handy if the caller has a pre-assembled bio, +but wants to direct different portions of the bio to different devices. + + int dm_io_sync_bvec(unsigned int num_regions, struct io_region *where, + int rw, struct bio_vec *bvec, + unsigned long *error_bits); + int dm_io_async_bvec(unsigned int num_regions, struct io_region *where, + int rw, struct bio_vec *bvec, + io_notify_fn fn, void *context); + +The third I/O service type takes a pointer to a vmalloc'd memory buffer as the +data buffer for the I/O. This service can be handy if the caller needs to do +I/O to a large region but doesn't want to allocate a large number of individual +memory pages. + + int dm_io_sync_vm(unsigned int num_regions, struct io_region *where, int rw, + void *data, unsigned long *error_bits); + int dm_io_async_vm(unsigned int num_regions, struct io_region *where, int rw, + void *data, io_notify_fn fn, void *context); + +Callers of the asynchronous I/O services must include the name of a completion +callback routine and a pointer to some context data for the I/O. + + typedef void (*io_notify_fn)(unsigned long error, void *context); + +The "error" parameter in this callback, as well as the "*error" parameter in +all of the synchronous versions, is a bitset (instead of a simple error value). +In the case of an write-I/O to multiple regions, this bitset allows dm-io to +indicate success or failure on each individual region. + +Before using any of the dm-io services, the user should call dm_io_get() +and specify the number of pages they expect to perform I/O on concurrently. +Dm-io will attempt to resize its mempool to make sure enough pages are +always available in order to avoid unnecessary waiting while performing I/O. + +When the user is finished using the dm-io services, they should call +dm_io_put() and specify the same number of pages that were given on the +dm_io_get() call. + diff --git a/kernel/Documentation/device-mapper/dm-log.txt b/kernel/Documentation/device-mapper/dm-log.txt new file mode 100644 index 000000000..c155ac569 --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-log.txt @@ -0,0 +1,54 @@ +Device-Mapper Logging +===================== +The device-mapper logging code is used by some of the device-mapper +RAID targets to track regions of the disk that are not consistent. +A region (or portion of the address space) of the disk may be +inconsistent because a RAID stripe is currently being operated on or +a machine died while the region was being altered. In the case of +mirrors, a region would be considered dirty/inconsistent while you +are writing to it because the writes need to be replicated for all +the legs of the mirror and may not reach the legs at the same time. +Once all writes are complete, the region is considered clean again. + +There is a generic logging interface that the device-mapper RAID +implementations use to perform logging operations (see +dm_dirty_log_type in include/linux/dm-dirty-log.h). Various different +logging implementations are available and provide different +capabilities. The list includes: + +Type Files +==== ===== +disk drivers/md/dm-log.c +core drivers/md/dm-log.c +userspace drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h + +The "disk" log type +------------------- +This log implementation commits the log state to disk. This way, the +logging state survives reboots/crashes. + +The "core" log type +------------------- +This log implementation keeps the log state in memory. The log state +will not survive a reboot or crash, but there may be a small boost in +performance. This method can also be used if no storage device is +available for storing log state. + +The "userspace" log type +------------------------ +This log type simply provides a way to export the log API to userspace, +so log implementations can be done there. This is done by forwarding most +logging requests to userspace, where a daemon receives and processes the +request. + +The structure used for communication between kernel and userspace are +located in include/linux/dm-log-userspace.h. Due to the frequency, +diversity, and 2-way communication nature of the exchanges between +kernel and userspace, 'connector' is used as the interface for +communication. + +There are currently two userspace log implementations that leverage this +framework - "clustered-disk" and "clustered-core". These implementations +provide a cluster-coherent log for shared-storage. Device-mapper mirroring +can be used in a shared-storage environment when the cluster log implementations +are employed. diff --git a/kernel/Documentation/device-mapper/dm-queue-length.txt b/kernel/Documentation/device-mapper/dm-queue-length.txt new file mode 100644 index 000000000..f4db25621 --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-queue-length.txt @@ -0,0 +1,39 @@ +dm-queue-length +=============== + +dm-queue-length is a path selector module for device-mapper targets, +which selects a path with the least number of in-flight I/Os. +The path selector name is 'queue-length'. + +Table parameters for each path: [<repeat_count>] + <repeat_count>: The number of I/Os to dispatch using the selected + path before switching to the next path. + If not given, internal default is used. To check + the default value, see the activated table. + +Status for each path: <status> <fail-count> <in-flight> + <status>: 'A' if the path is active, 'F' if the path is failed. + <fail-count>: The number of path failures. + <in-flight>: The number of in-flight I/Os on the path. + + +Algorithm +========= + +dm-queue-length increments/decrements 'in-flight' when an I/O is +dispatched/completed respectively. +dm-queue-length selects a path with the minimum 'in-flight'. + + +Examples +======== +In case that 2 paths (sda and sdb) are used with repeat_count == 128. + +# echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \ + dmsetup create test +# +# dmsetup table +test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128 +# +# dmsetup status +test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0 diff --git a/kernel/Documentation/device-mapper/dm-raid.txt b/kernel/Documentation/device-mapper/dm-raid.txt new file mode 100644 index 000000000..ef8ba9fa5 --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-raid.txt @@ -0,0 +1,226 @@ +dm-raid +======= + +The device-mapper RAID (dm-raid) target provides a bridge from DM to MD. +It allows the MD RAID drivers to be accessed using a device-mapper +interface. + + +Mapping Table Interface +----------------------- +The target is named "raid" and it accepts the following parameters: + + <raid_type> <#raid_params> <raid_params> \ + <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>] + +<raid_type>: + raid1 RAID1 mirroring + raid4 RAID4 dedicated parity disk + raid5_la RAID5 left asymmetric + - rotating parity 0 with data continuation + raid5_ra RAID5 right asymmetric + - rotating parity N with data continuation + raid5_ls RAID5 left symmetric + - rotating parity 0 with data restart + raid5_rs RAID5 right symmetric + - rotating parity N with data restart + raid6_zr RAID6 zero restart + - rotating parity zero (left-to-right) with data restart + raid6_nr RAID6 N restart + - rotating parity N (right-to-left) with data restart + raid6_nc RAID6 N continue + - rotating parity N (right-to-left) with data continuation + raid10 Various RAID10 inspired algorithms chosen by additional params + - RAID10: Striped Mirrors (aka 'Striping on top of mirrors') + - RAID1E: Integrated Adjacent Stripe Mirroring + - RAID1E: Integrated Offset Stripe Mirroring + - and other similar RAID10 variants + + Reference: Chapter 4 of + http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf + +<#raid_params>: The number of parameters that follow. + +<raid_params> consists of + Mandatory parameters: + <chunk_size>: Chunk size in sectors. This parameter is often known as + "stripe size". It is the only mandatory parameter and + is placed first. + + followed by optional parameters (in any order): + [sync|nosync] Force or prevent RAID initialization. + + [rebuild <idx>] Rebuild drive number 'idx' (first drive is 0). + + [daemon_sleep <ms>] + Interval between runs of the bitmap daemon that + clear bits. A longer interval means less bitmap I/O but + resyncing after a failure is likely to take longer. + + [min_recovery_rate <kB/sec/disk>] Throttle RAID initialization + [max_recovery_rate <kB/sec/disk>] Throttle RAID initialization + [write_mostly <idx>] Mark drive index 'idx' write-mostly. + [max_write_behind <sectors>] See '--write-behind=' (man mdadm) + [stripe_cache <sectors>] Stripe cache size (RAID 4/5/6 only) + [region_size <sectors>] + The region_size multiplied by the number of regions is the + logical size of the array. The bitmap records the device + synchronisation state for each region. + + [raid10_copies <# copies>] + [raid10_format <near|far|offset>] + These two options are used to alter the default layout of + a RAID10 configuration. The number of copies is can be + specified, but the default is 2. There are also three + variations to how the copies are laid down - the default + is "near". Near copies are what most people think of with + respect to mirroring. If these options are left unspecified, + or 'raid10_copies 2' and/or 'raid10_format near' are given, + then the layouts for 2, 3 and 4 devices are: + 2 drives 3 drives 4 drives + -------- ---------- -------------- + A1 A1 A1 A1 A2 A1 A1 A2 A2 + A2 A2 A2 A3 A3 A3 A3 A4 A4 + A3 A3 A4 A4 A5 A5 A5 A6 A6 + A4 A4 A5 A6 A6 A7 A7 A8 A8 + .. .. .. .. .. .. .. .. .. + The 2-device layout is equivalent 2-way RAID1. The 4-device + layout is what a traditional RAID10 would look like. The + 3-device layout is what might be called a 'RAID1E - Integrated + Adjacent Stripe Mirroring'. + + If 'raid10_copies 2' and 'raid10_format far', then the layouts + for 2, 3 and 4 devices are: + 2 drives 3 drives 4 drives + -------- -------------- -------------------- + A1 A2 A1 A2 A3 A1 A2 A3 A4 + A3 A4 A4 A5 A6 A5 A6 A7 A8 + A5 A6 A7 A8 A9 A9 A10 A11 A12 + .. .. .. .. .. .. .. .. .. + A2 A1 A3 A1 A2 A2 A1 A4 A3 + A4 A3 A6 A4 A5 A6 A5 A8 A7 + A6 A5 A9 A7 A8 A10 A9 A12 A11 + .. .. .. .. .. .. .. .. .. + + If 'raid10_copies 2' and 'raid10_format offset', then the + layouts for 2, 3 and 4 devices are: + 2 drives 3 drives 4 drives + -------- ------------ ----------------- + A1 A2 A1 A2 A3 A1 A2 A3 A4 + A2 A1 A3 A1 A2 A2 A1 A4 A3 + A3 A4 A4 A5 A6 A5 A6 A7 A8 + A4 A3 A6 A4 A5 A6 A5 A8 A7 + A5 A6 A7 A8 A9 A9 A10 A11 A12 + A6 A5 A9 A7 A8 A10 A9 A12 A11 + .. .. .. .. .. .. .. .. .. + Here we see layouts closely akin to 'RAID1E - Integrated + Offset Stripe Mirroring'. + +<#raid_devs>: The number of devices composing the array. + Each device consists of two entries. The first is the device + containing the metadata (if any); the second is the one containing the + data. + + If a drive has failed or is missing at creation time, a '-' can be + given for both the metadata and data drives for a given position. + + +Example Tables +-------------- +# RAID4 - 4 data drives, 1 parity (no metadata devices) +# No metadata devices specified to hold superblock/bitmap info +# Chunk size of 1MiB +# (Lines separated for easy reading) + +0 1960893648 raid \ + raid4 1 2048 \ + 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 + +# RAID4 - 4 data drives, 1 parity (with metadata devices) +# Chunk size of 1MiB, force RAID initialization, +# min recovery rate at 20 kiB/sec/disk + +0 1960893648 raid \ + raid4 4 2048 sync min_recovery_rate 20 \ + 5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82 + + +Status Output +------------- +'dmsetup table' displays the table used to construct the mapping. +The optional parameters are always printed in the order listed +above with "sync" or "nosync" always output ahead of the other +arguments, regardless of the order used when originally loading the table. +Arguments that can be repeated are ordered by value. + + +'dmsetup status' yields information on the state and health of the array. +The output is as follows (normally a single line, but expanded here for +clarity): +1: <s> <l> raid \ +2: <raid_type> <#devices> <health_chars> \ +3: <sync_ratio> <sync_action> <mismatch_cnt> + +Line 1 is the standard output produced by device-mapper. +Line 2 & 3 are produced by the raid target and are best explained by example: + 0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0 +Here we can see the RAID type is raid4, there are 5 devices - all of +which are 'A'live, and the array is 2/490221568 complete with its initial +recovery. Here is a fuller description of the individual fields: + <raid_type> Same as the <raid_type> used to create the array. + <health_chars> One char for each device, indicating: 'A' = alive and + in-sync, 'a' = alive but not in-sync, 'D' = dead/failed. + <sync_ratio> The ratio indicating how much of the array has undergone + the process described by 'sync_action'. If the + 'sync_action' is "check" or "repair", then the process + of "resync" or "recover" can be considered complete. + <sync_action> One of the following possible states: + idle - No synchronization action is being performed. + frozen - The current action has been halted. + resync - Array is undergoing its initial synchronization + or is resynchronizing after an unclean shutdown + (possibly aided by a bitmap). + recover - A device in the array is being rebuilt or + replaced. + check - A user-initiated full check of the array is + being performed. All blocks are read and + checked for consistency. The number of + discrepancies found are recorded in + <mismatch_cnt>. No changes are made to the + array by this action. + repair - The same as "check", but discrepancies are + corrected. + reshape - The array is undergoing a reshape. + <mismatch_cnt> The number of discrepancies found between mirror copies + in RAID1/10 or wrong parity values found in RAID4/5/6. + This value is valid only after a "check" of the array + is performed. A healthy array has a 'mismatch_cnt' of 0. + +Message Interface +----------------- +The dm-raid target will accept certain actions through the 'message' interface. +('man dmsetup' for more information on the message interface.) These actions +include: + "idle" - Halt the current sync action. + "frozen" - Freeze the current sync action. + "resync" - Initiate/continue a resync. + "recover"- Initiate/continue a recover process. + "check" - Initiate a check (i.e. a "scrub") of the array. + "repair" - Initiate a repair of the array. + "reshape"- Currently unsupported (-EINVAL). + +Version History +--------------- +1.0.0 Initial version. Support for RAID 4/5/6 +1.1.0 Added support for RAID 1 +1.2.0 Handle creation of arrays that contain failed devices. +1.3.0 Added support for RAID 10 +1.3.1 Allow device replacement/rebuild for RAID 10 +1.3.2 Fix/improve redundancy checking for RAID10 +1.4.0 Non-functional change. Removes arg from mapping function. +1.4.1 RAID10 fix redundancy validation checks (commit 55ebbb5). +1.4.2 Add RAID10 "far" and "offset" algorithm support. +1.5.0 Add message interface to allow manipulation of the sync_action. + New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt. +1.5.1 Add ability to restore transiently failed devices on resume. +1.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check". diff --git a/kernel/Documentation/device-mapper/dm-service-time.txt b/kernel/Documentation/device-mapper/dm-service-time.txt new file mode 100644 index 000000000..fb1d4a0cf --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-service-time.txt @@ -0,0 +1,91 @@ +dm-service-time +=============== + +dm-service-time is a path selector module for device-mapper targets, +which selects a path with the shortest estimated service time for +the incoming I/O. + +The service time for each path is estimated by dividing the total size +of in-flight I/Os on a path with the performance value of the path. +The performance value is a relative throughput value among all paths +in a path-group, and it can be specified as a table argument. + +The path selector name is 'service-time'. + +Table parameters for each path: [<repeat_count> [<relative_throughput>]] + <repeat_count>: The number of I/Os to dispatch using the selected + path before switching to the next path. + If not given, internal default is used. To check + the default value, see the activated table. + <relative_throughput>: The relative throughput value of the path + among all paths in the path-group. + The valid range is 0-100. + If not given, minimum value '1' is used. + If '0' is given, the path isn't selected while + other paths having a positive value are available. + +Status for each path: <status> <fail-count> <in-flight-size> \ + <relative_throughput> + <status>: 'A' if the path is active, 'F' if the path is failed. + <fail-count>: The number of path failures. + <in-flight-size>: The size of in-flight I/Os on the path. + <relative_throughput>: The relative throughput value of the path + among all paths in the path-group. + + +Algorithm +========= + +dm-service-time adds the I/O size to 'in-flight-size' when the I/O is +dispatched and subtracts when completed. +Basically, dm-service-time selects a path having minimum service time +which is calculated by: + + ('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput' + +However, some optimizations below are used to reduce the calculation +as much as possible. + + 1. If the paths have the same 'relative_throughput', skip + the division and just compare the 'in-flight-size'. + + 2. If the paths have the same 'in-flight-size', skip the division + and just compare the 'relative_throughput'. + + 3. If some paths have non-zero 'relative_throughput' and others + have zero 'relative_throughput', ignore those paths with zero + 'relative_throughput'. + +If such optimizations can't be applied, calculate service time, and +compare service time. +If calculated service time is equal, the path having maximum +'relative_throughput' may be better. So compare 'relative_throughput' +then. + + +Examples +======== +In case that 2 paths (sda and sdb) are used with repeat_count == 128 +and sda has an average throughput 1GB/s and sdb has 4GB/s, +'relative_throughput' value may be '1' for sda and '4' for sdb. + +# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \ + dmsetup create test +# +# dmsetup table +test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4 +# +# dmsetup status +test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4 + + +Or '2' for sda and '8' for sdb would be also true. + +# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \ + dmsetup create test +# +# dmsetup table +test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8 +# +# dmsetup status +test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8 diff --git a/kernel/Documentation/device-mapper/dm-uevent.txt b/kernel/Documentation/device-mapper/dm-uevent.txt new file mode 100644 index 000000000..07edbd85c --- /dev/null +++ b/kernel/Documentation/device-mapper/dm-uevent.txt @@ -0,0 +1,97 @@ +The device-mapper uevent code adds the capability to device-mapper to create +and send kobject uevents (uevents). Previously device-mapper events were only +available through the ioctl interface. The advantage of the uevents interface +is the event contains environment attributes providing increased context for +the event avoiding the need to query the state of the device-mapper device after +the event is received. + +There are two functions currently for device-mapper events. The first function +listed creates the event and the second function sends the event(s). + +void dm_path_uevent(enum dm_uevent_type event_type, struct dm_target *ti, + const char *path, unsigned nr_valid_paths) + +void dm_send_uevents(struct list_head *events, struct kobject *kobj) + + +The variables added to the uevent environment are: + +Variable Name: DM_TARGET +Uevent Action(s): KOBJ_CHANGE +Type: string +Description: +Value: Name of device-mapper target that generated the event. + +Variable Name: DM_ACTION +Uevent Action(s): KOBJ_CHANGE +Type: string +Description: +Value: Device-mapper specific action that caused the uevent action. + PATH_FAILED - A path has failed. + PATH_REINSTATED - A path has been reinstated. + +Variable Name: DM_SEQNUM +Uevent Action(s): KOBJ_CHANGE +Type: unsigned integer +Description: A sequence number for this specific device-mapper device. +Value: Valid unsigned integer range. + +Variable Name: DM_PATH +Uevent Action(s): KOBJ_CHANGE +Type: string +Description: Major and minor number of the path device pertaining to this +event. +Value: Path name in the form of "Major:Minor" + +Variable Name: DM_NR_VALID_PATHS +Uevent Action(s): KOBJ_CHANGE +Type: unsigned integer +Description: +Value: Valid unsigned integer range. + +Variable Name: DM_NAME +Uevent Action(s): KOBJ_CHANGE +Type: string +Description: Name of the device-mapper device. +Value: Name + +Variable Name: DM_UUID +Uevent Action(s): KOBJ_CHANGE +Type: string +Description: UUID of the device-mapper device. +Value: UUID. (Empty string if there isn't one.) + +An example of the uevents generated as captured by udevmonitor is shown +below. + +1.) Path failure. +UEVENT[1192521009.711215] change@/block/dm-3 +ACTION=change +DEVPATH=/block/dm-3 +SUBSYSTEM=block +DM_TARGET=multipath +DM_ACTION=PATH_FAILED +DM_SEQNUM=1 +DM_PATH=8:32 +DM_NR_VALID_PATHS=0 +DM_NAME=mpath2 +DM_UUID=mpath-35333333000002328 +MINOR=3 +MAJOR=253 +SEQNUM=1130 + +2.) Path reinstate. +UEVENT[1192521132.989927] change@/block/dm-3 +ACTION=change +DEVPATH=/block/dm-3 +SUBSYSTEM=block +DM_TARGET=multipath +DM_ACTION=PATH_REINSTATED +DM_SEQNUM=2 +DM_PATH=8:32 +DM_NR_VALID_PATHS=1 +DM_NAME=mpath2 +DM_UUID=mpath-35333333000002328 +MINOR=3 +MAJOR=253 +SEQNUM=1131 diff --git a/kernel/Documentation/device-mapper/era.txt b/kernel/Documentation/device-mapper/era.txt new file mode 100644 index 000000000..3c6d01be3 --- /dev/null +++ b/kernel/Documentation/device-mapper/era.txt @@ -0,0 +1,108 @@ +Introduction +============ + +dm-era is a target that behaves similar to the linear target. In +addition it keeps track of which blocks were written within a user +defined period of time called an 'era'. Each era target instance +maintains the current era as a monotonically increasing 32-bit +counter. + +Use cases include tracking changed blocks for backup software, and +partially invalidating the contents of a cache to restore cache +coherency after rolling back a vendor snapshot. + +Constructor +=========== + + era <metadata dev> <origin dev> <block size> + + metadata dev : fast device holding the persistent metadata + origin dev : device holding data blocks that may change + block size : block size of origin data device, granularity that is + tracked by the target + +Messages +======== + +None of the dm messages take any arguments. + +checkpoint +---------- + +Possibly move to a new era. You shouldn't assume the era has +incremented. After sending this message, you should check the +current era via the status line. + +take_metadata_snap +------------------ + +Create a clone of the metadata, to allow a userland process to read it. + +drop_metadata_snap +------------------ + +Drop the metadata snapshot. + +Status +====== + +<metadata block size> <#used metadata blocks>/<#total metadata blocks> +<current era> <held metadata root | '-'> + +metadata block size : Fixed block size for each metadata block in + sectors +#used metadata blocks : Number of metadata blocks used +#total metadata blocks : Total number of metadata blocks +current era : The current era +held metadata root : The location, in blocks, of the metadata root + that has been 'held' for userspace read + access. '-' indicates there is no held root + +Detailed use case +================= + +The scenario of invalidating a cache when rolling back a vendor +snapshot was the primary use case when developing this target: + +Taking a vendor snapshot +------------------------ + +- Send a checkpoint message to the era target +- Make a note of the current era in its status line +- Take vendor snapshot (the era and snapshot should be forever + associated now). + +Rolling back to an vendor snapshot +---------------------------------- + +- Cache enters passthrough mode (see: dm-cache's docs in cache.txt) +- Rollback vendor storage +- Take metadata snapshot +- Ascertain which blocks have been written since the snapshot was taken + by checking each block's era +- Invalidate those blocks in the caching software +- Cache returns to writeback/writethrough mode + +Memory usage +============ + +The target uses a bitset to record writes in the current era. It also +has a spare bitset ready for switching over to a new era. Other than +that it uses a few 4k blocks for updating metadata. + + (4 * nr_blocks) bytes + buffers + +Resilience +========== + +Metadata is updated on disk before a write to a previously unwritten +block is performed. As such dm-era should not be effected by a hard +crash such as power failure. + +Userland tools +============== + +Userland tools are found in the increasingly poorly named +thin-provisioning-tools project: + + https://github.com/jthornber/thin-provisioning-tools diff --git a/kernel/Documentation/device-mapper/kcopyd.txt b/kernel/Documentation/device-mapper/kcopyd.txt new file mode 100644 index 000000000..820382c4c --- /dev/null +++ b/kernel/Documentation/device-mapper/kcopyd.txt @@ -0,0 +1,47 @@ +kcopyd +====== + +Kcopyd provides the ability to copy a range of sectors from one block-device +to one or more other block-devices, with an asynchronous completion +notification. It is used by dm-snapshot and dm-mirror. + +Users of kcopyd must first create a client and indicate how many memory pages +to set aside for their copy jobs. This is done with a call to +kcopyd_client_create(). + + int kcopyd_client_create(unsigned int num_pages, + struct kcopyd_client **result); + +To start a copy job, the user must set up io_region structures to describe +the source and destinations of the copy. Each io_region indicates a +block-device along with the starting sector and size of the region. The source +of the copy is given as one io_region structure, and the destinations of the +copy are given as an array of io_region structures. + + struct io_region { + struct block_device *bdev; + sector_t sector; + sector_t count; + }; + +To start the copy, the user calls kcopyd_copy(), passing in the client +pointer, pointers to the source and destination io_regions, the name of a +completion callback routine, and a pointer to some context data for the copy. + + int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from, + unsigned int num_dests, struct io_region *dests, + unsigned int flags, kcopyd_notify_fn fn, void *context); + + typedef void (*kcopyd_notify_fn)(int read_err, unsigned int write_err, + void *context); + +When the copy completes, kcopyd will call the user's completion routine, +passing back the user's context pointer. It will also indicate if a read or +write error occurred during the copy. + +When a user is done with all their copy jobs, they should call +kcopyd_client_destroy() to delete the kcopyd client, which will release the +associated memory pages. + + void kcopyd_client_destroy(struct kcopyd_client *kc); + diff --git a/kernel/Documentation/device-mapper/linear.txt b/kernel/Documentation/device-mapper/linear.txt new file mode 100644 index 000000000..d5307d380 --- /dev/null +++ b/kernel/Documentation/device-mapper/linear.txt @@ -0,0 +1,61 @@ +dm-linear +========= + +Device-Mapper's "linear" target maps a linear range of the Device-Mapper +device onto a linear range of another device. This is the basic building +block of logical volume managers. + +Parameters: <dev path> <offset> + <dev path>: Full pathname to the underlying block-device, or a + "major:minor" device-number. + <offset>: Starting sector within the device. + + +Example scripts +=============== +[[ +#!/bin/sh +# Create an identity mapping for a device +echo "0 `blockdev --getsize $1` linear $1 0" | dmsetup create identity +]] + + +[[ +#!/bin/sh +# Join 2 devices together +size1=`blockdev --getsize $1` +size2=`blockdev --getsize $2` +echo "0 $size1 linear $1 0 +$size1 $size2 linear $2 0" | dmsetup create joined +]] + + +[[ +#!/usr/bin/perl -w +# Split a device into 4M chunks and then join them together in reverse order. + +my $name = "reverse"; +my $extent_size = 4 * 1024 * 2; +my $dev = $ARGV[0]; +my $table = ""; +my $count = 0; + +if (!defined($dev)) { + die("Please specify a device.\n"); +} + +my $dev_size = `blockdev --getsize $dev`; +my $extents = int($dev_size / $extent_size) - + (($dev_size % $extent_size) ? 1 : 0); + +while ($extents > 0) { + my $this_start = $count * $extent_size; + $extents--; + $count++; + my $this_offset = $extents * $extent_size; + + $table .= "$this_start $extent_size linear $dev $this_offset\n"; +} + +`echo \"$table\" | dmsetup create $name`; +]] diff --git a/kernel/Documentation/device-mapper/log-writes.txt b/kernel/Documentation/device-mapper/log-writes.txt new file mode 100644 index 000000000..c10f30c9b --- /dev/null +++ b/kernel/Documentation/device-mapper/log-writes.txt @@ -0,0 +1,140 @@ +dm-log-writes +============= + +This target takes 2 devices, one to pass all IO to normally, and one to log all +of the write operations to. This is intended for file system developers wishing +to verify the integrity of metadata or data as the file system is written to. +There is a log_write_entry written for every WRITE request and the target is +able to take arbitrary data from userspace to insert into the log. The data +that is in the WRITE requests is copied into the log to make the replay happen +exactly as it happened originally. + +Log Ordering +============ + +We log things in order of completion once we are sure the write is no longer in +cache. This means that normal WRITE requests are not actually logged until the +next REQ_FLUSH request. This is to make it easier for userspace to replay the +log in a way that correlates to what is on disk and not what is in cache, to +make it easier to detect improper waiting/flushing. + +This works by attaching all WRITE requests to a list once the write completes. +Once we see a REQ_FLUSH request we splice this list onto the request and once +the FLUSH request completes we log all of the WRITEs and then the FLUSH. Only +completed WRITEs, at the time the REQ_FLUSH is issued, are added in order to +simulate the worst case scenario with regard to power failures. Consider the +following example (W means write, C means complete): + +W1,W2,W3,C3,C2,Wflush,C1,Cflush + +The log would show the following + +W3,W2,flush,W1.... + +Again this is to simulate what is actually on disk, this allows us to detect +cases where a power failure at a particular point in time would create an +inconsistent file system. + +Any REQ_FUA requests bypass this flushing mechanism and are logged as soon as +they complete as those requests will obviously bypass the device cache. + +Any REQ_DISCARD requests are treated like WRITE requests. Otherwise we would +have all the DISCARD requests, and then the WRITE requests and then the FLUSH +request. Consider the following example: + +WRITE block 1, DISCARD block 1, FLUSH + +If we logged DISCARD when it completed, the replay would look like this + +DISCARD 1, WRITE 1, FLUSH + +which isn't quite what happened and wouldn't be caught during the log replay. + +Target interface +================ + +i) Constructor + + log-writes <dev_path> <log_dev_path> + + dev_path : Device that all of the IO will go to normally. + log_dev_path : Device where the log entries are written to. + +ii) Status + + <#logged entries> <highest allocated sector> + + #logged entries : Number of logged entries + highest allocated sector : Highest allocated sector + +iii) Messages + + mark <description> + + You can use a dmsetup message to set an arbitrary mark in a log. + For example say you want to fsck a file system after every + write, but first you need to replay up to the mkfs to make sure + we're fsck'ing something reasonable, you would do something like + this: + + mkfs.btrfs -f /dev/mapper/log + dmsetup message log 0 mark mkfs + <run test> + + This would allow you to replay the log up to the mkfs mark and + then replay from that point on doing the fsck check in the + interval that you want. + + Every log has a mark at the end labeled "dm-log-writes-end". + +Userspace component +=================== + +There is a userspace tool that will replay the log for you in various ways. +It can be found here: https://github.com/josefbacik/log-writes + +Example usage +============= + +Say you want to test fsync on your file system. You would do something like +this: + +TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc" +dmsetup create log --table "$TABLE" +mkfs.btrfs -f /dev/mapper/log +dmsetup message log 0 mark mkfs + +mount /dev/mapper/log /mnt/btrfs-test +<some test that does fsync at the end> +dmsetup message log 0 mark fsync +md5sum /mnt/btrfs-test/foo +umount /mnt/btrfs-test + +dmsetup remove log +replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync +mount /dev/sdb /mnt/btrfs-test +md5sum /mnt/btrfs-test/foo +<verify md5sum's are correct> + +Another option is to do a complicated file system operation and verify the file +system is consistent during the entire operation. You could do this with: + +TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc" +dmsetup create log --table "$TABLE" +mkfs.btrfs -f /dev/mapper/log +dmsetup message log 0 mark mkfs + +mount /dev/mapper/log /mnt/btrfs-test +<fsstress to dirty the fs> +btrfs filesystem balance /mnt/btrfs-test +umount /mnt/btrfs-test +dmsetup remove log + +replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs +btrfsck /dev/sdb +replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \ + --fsck "btrfsck /dev/sdb" --check fua + +And that will replay the log until it sees a FUA request, run the fsck command +and if the fsck passes it will replay to the next FUA, until it is completed or +the fsck command exists abnormally. diff --git a/kernel/Documentation/device-mapper/persistent-data.txt b/kernel/Documentation/device-mapper/persistent-data.txt new file mode 100644 index 000000000..a333bcb3a --- /dev/null +++ b/kernel/Documentation/device-mapper/persistent-data.txt @@ -0,0 +1,84 @@ +Introduction +============ + +The more-sophisticated device-mapper targets require complex metadata +that is managed in kernel. In late 2010 we were seeing that various +different targets were rolling their own data structures, for example: + +- Mikulas Patocka's multisnap implementation +- Heinz Mauelshagen's thin provisioning target +- Another btree-based caching target posted to dm-devel +- Another multi-snapshot target based on a design of Daniel Phillips + +Maintaining these data structures takes a lot of work, so if possible +we'd like to reduce the number. + +The persistent-data library is an attempt to provide a re-usable +framework for people who want to store metadata in device-mapper +targets. It's currently used by the thin-provisioning target and an +upcoming hierarchical storage target. + +Overview +======== + +The main documentation is in the header files which can all be found +under drivers/md/persistent-data. + +The block manager +----------------- + +dm-block-manager.[hc] + +This provides access to the data on disk in fixed sized-blocks. There +is a read/write locking interface to prevent concurrent accesses, and +keep data that is being used in the cache. + +Clients of persistent-data are unlikely to use this directly. + +The transaction manager +----------------------- + +dm-transaction-manager.[hc] + +This restricts access to blocks and enforces copy-on-write semantics. +The only way you can get hold of a writable block through the +transaction manager is by shadowing an existing block (ie. doing +copy-on-write) or allocating a fresh one. Shadowing is elided within +the same transaction so performance is reasonable. The commit method +ensures that all data is flushed before it writes the superblock. +On power failure your metadata will be as it was when last committed. + +The Space Maps +-------------- + +dm-space-map.h +dm-space-map-metadata.[hc] +dm-space-map-disk.[hc] + +On-disk data structures that keep track of reference counts of blocks. +Also acts as the allocator of new blocks. Currently two +implementations: a simpler one for managing blocks on a different +device (eg. thinly-provisioned data blocks); and one for managing +the metadata space. The latter is complicated by the need to store +its own data within the space it's managing. + +The data structures +------------------- + +dm-btree.[hc] +dm-btree-remove.c +dm-btree-spine.c +dm-btree-internal.h + +Currently there is only one data structure, a hierarchical btree. +There are plans to add more. For example, something with an +array-like interface would see a lot of use. + +The btree is 'hierarchical' in that you can define it to be composed +of nested btrees, and take multiple keys. For example, the +thin-provisioning target uses a btree with two levels of nesting. +The first maps a device id to a mapping tree, and that in turn maps a +virtual block to a physical block. + +Values stored in the btrees can have arbitrary size. Keys are always +64bits, although nesting allows you to use multiple keys. diff --git a/kernel/Documentation/device-mapper/snapshot.txt b/kernel/Documentation/device-mapper/snapshot.txt new file mode 100644 index 000000000..0d5bc46dc --- /dev/null +++ b/kernel/Documentation/device-mapper/snapshot.txt @@ -0,0 +1,168 @@ +Device-mapper snapshot support +============================== + +Device-mapper allows you, without massive data copying: + +*) To create snapshots of any block device i.e. mountable, saved states of +the block device which are also writable without interfering with the +original content; +*) To create device "forks", i.e. multiple different versions of the +same data stream. +*) To merge a snapshot of a block device back into the snapshot's origin +device. + +In the first two cases, dm copies only the chunks of data that get +changed and uses a separate copy-on-write (COW) block device for +storage. + +For snapshot merge the contents of the COW storage are merged back into +the origin device. + + +There are three dm targets available: +snapshot, snapshot-origin, and snapshot-merge. + +*) snapshot-origin <origin> + +which will normally have one or more snapshots based on it. +Reads will be mapped directly to the backing device. For each write, the +original data will be saved in the <COW device> of each snapshot to keep +its visible content unchanged, at least until the <COW device> fills up. + + +*) snapshot <origin> <COW device> <persistent?> <chunksize> + +A snapshot of the <origin> block device is created. Changed chunks of +<chunksize> sectors will be stored on the <COW device>. Writes will +only go to the <COW device>. Reads will come from the <COW device> or +from <origin> for unchanged data. <COW device> will often be +smaller than the origin and if it fills up the snapshot will become +useless and be disabled, returning errors. So it is important to monitor +the amount of free space and expand the <COW device> before it fills up. + +<persistent?> is P (Persistent) or N (Not persistent - will not survive +after reboot). +The difference is that for transient snapshots less metadata must be +saved on disk - they can be kept in memory by the kernel. + + +* snapshot-merge <origin> <COW device> <persistent> <chunksize> + +takes the same table arguments as the snapshot target except it only +works with persistent snapshots. This target assumes the role of the +"snapshot-origin" target and must not be loaded if the "snapshot-origin" +is still present for <origin>. + +Creates a merging snapshot that takes control of the changed chunks +stored in the <COW device> of an existing snapshot, through a handover +procedure, and merges these chunks back into the <origin>. Once merging +has started (in the background) the <origin> may be opened and the merge +will continue while I/O is flowing to it. Changes to the <origin> are +deferred until the merging snapshot's corresponding chunk(s) have been +merged. Once merging has started the snapshot device, associated with +the "snapshot" target, will return -EIO when accessed. + + +How snapshot is used by LVM2 +============================ +When you create the first LVM2 snapshot of a volume, four dm devices are used: + +1) a device containing the original mapping table of the source volume; +2) a device used as the <COW device>; +3) a "snapshot" device, combining #1 and #2, which is the visible snapshot + volume; +4) the "original" volume (which uses the device number used by the original + source volume), whose table is replaced by a "snapshot-origin" mapping + from device #1. + +A fixed naming scheme is used, so with the following commands: + +lvcreate -L 1G -n base volumeGroup +lvcreate -L 100M --snapshot -n snap volumeGroup/base + +we'll have this situation (with volumes in above order): + +# dmsetup table|grep volumeGroup + +volumeGroup-base-real: 0 2097152 linear 8:19 384 +volumeGroup-snap-cow: 0 204800 linear 8:19 2097536 +volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16 +volumeGroup-base: 0 2097152 snapshot-origin 254:11 + +# ls -lL /dev/mapper/volumeGroup-* +brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real +brw------- 1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow +brw------- 1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap +brw------- 1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base + + +How snapshot-merge is used by LVM2 +================================== +A merging snapshot assumes the role of the "snapshot-origin" while +merging. As such the "snapshot-origin" is replaced with +"snapshot-merge". The "-real" device is not changed and the "-cow" +device is renamed to <origin name>-cow to aid LVM2's cleanup of the +merging snapshot after it completes. The "snapshot" that hands over its +COW device to the "snapshot-merge" is deactivated (unless using lvchange +--refresh); but if it is left active it will simply return I/O errors. + +A snapshot will merge into its origin with the following command: + +lvconvert --merge volumeGroup/snap + +we'll now have this situation: + +# dmsetup table|grep volumeGroup + +volumeGroup-base-real: 0 2097152 linear 8:19 384 +volumeGroup-base-cow: 0 204800 linear 8:19 2097536 +volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16 + +# ls -lL /dev/mapper/volumeGroup-* +brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real +brw------- 1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow +brw------- 1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base + + +How to determine when a merging is complete +=========================================== +The snapshot-merge and snapshot status lines end with: + <sectors_allocated>/<total_sectors> <metadata_sectors> + +Both <sectors_allocated> and <total_sectors> include both data and metadata. +During merging, the number of sectors allocated gets smaller and +smaller. Merging has finished when the number of sectors holding data +is zero, in other words <sectors_allocated> == <metadata_sectors>. + +Here is a practical example (using a hybrid of lvm and dmsetup commands): + +# lvs + LV VG Attr LSize Origin Snap% Move Log Copy% Convert + base volumeGroup owi-a- 4.00g + snap volumeGroup swi-a- 1.00g base 18.97 + +# dmsetup status volumeGroup-snap +0 8388608 snapshot 397896/2097152 1560 + ^^^^ metadata sectors + +# lvconvert --merge -b volumeGroup/snap + Merging of volume snap started. + +# lvs volumeGroup/snap + LV VG Attr LSize Origin Snap% Move Log Copy% Convert + base volumeGroup Owi-a- 4.00g 17.23 + +# dmsetup status volumeGroup-base +0 8388608 snapshot-merge 281688/2097152 1104 + +# dmsetup status volumeGroup-base +0 8388608 snapshot-merge 180480/2097152 712 + +# dmsetup status volumeGroup-base +0 8388608 snapshot-merge 16/2097152 16 + +Merging has finished. + +# lvs + LV VG Attr LSize Origin Snap% Move Log Copy% Convert + base volumeGroup owi-a- 4.00g diff --git a/kernel/Documentation/device-mapper/statistics.txt b/kernel/Documentation/device-mapper/statistics.txt new file mode 100644 index 000000000..2a1673adc --- /dev/null +++ b/kernel/Documentation/device-mapper/statistics.txt @@ -0,0 +1,186 @@ +DM statistics +============= + +Device Mapper supports the collection of I/O statistics on user-defined +regions of a DM device. If no regions are defined no statistics are +collected so there isn't any performance impact. Only bio-based DM +devices are currently supported. + +Each user-defined region specifies a starting sector, length and step. +Individual statistics will be collected for each step-sized area within +the range specified. + +The I/O statistics counters for each step-sized area of a region are +in the same format as /sys/block/*/stat or /proc/diskstats (see: +Documentation/iostats.txt). But two extra counters (12 and 13) are +provided: total time spent reading and writing in milliseconds. All +these counters may be accessed by sending the @stats_print message to +the appropriate DM device via dmsetup. + +Each region has a corresponding unique identifier, which we call a +region_id, that is assigned when the region is created. The region_id +must be supplied when querying statistics about the region, deleting the +region, etc. Unique region_ids enable multiple userspace programs to +request and process statistics for the same DM device without stepping +on each other's data. + +The creation of DM statistics will allocate memory via kmalloc or +fallback to using vmalloc space. At most, 1/4 of the overall system +memory may be allocated by DM statistics. The admin can see how much +memory is used by reading +/sys/module/dm_mod/parameters/stats_current_allocated_bytes + +Messages +======== + + @stats_create <range> <step> [<program_id> [<aux_data>]] + + Create a new region and return the region_id. + + <range> + "-" - whole device + "<start_sector>+<length>" - a range of <length> 512-byte sectors + starting with <start_sector>. + + <step> + "<area_size>" - the range is subdivided into areas each containing + <area_size> sectors. + "/<number_of_areas>" - the range is subdivided into the specified + number of areas. + + <program_id> + An optional parameter. A name that uniquely identifies + the userspace owner of the range. This groups ranges together + so that userspace programs can identify the ranges they + created and ignore those created by others. + The kernel returns this string back in the output of + @stats_list message, but it doesn't use it for anything else. + + <aux_data> + An optional parameter. A word that provides auxiliary data + that is useful to the client program that created the range. + The kernel returns this string back in the output of + @stats_list message, but it doesn't use this value for anything. + + @stats_delete <region_id> + + Delete the region with the specified id. + + <region_id> + region_id returned from @stats_create + + @stats_clear <region_id> + + Clear all the counters except the in-flight i/o counters. + + <region_id> + region_id returned from @stats_create + + @stats_list [<program_id>] + + List all regions registered with @stats_create. + + <program_id> + An optional parameter. + If this parameter is specified, only matching regions + are returned. + If it is not specified, all regions are returned. + + Output format: + <region_id>: <start_sector>+<length> <step> <program_id> <aux_data> + + @stats_print <region_id> [<starting_line> <number_of_lines>] + + Print counters for each step-sized area of a region. + + <region_id> + region_id returned from @stats_create + + <starting_line> + The index of the starting line in the output. + If omitted, all lines are returned. + + <number_of_lines> + The number of lines to include in the output. + If omitted, all lines are returned. + + Output format for each step-sized area of a region: + + <start_sector>+<length> counters + + The first 11 counters have the same meaning as + /sys/block/*/stat or /proc/diskstats. + + Please refer to Documentation/iostats.txt for details. + + 1. the number of reads completed + 2. the number of reads merged + 3. the number of sectors read + 4. the number of milliseconds spent reading + 5. the number of writes completed + 6. the number of writes merged + 7. the number of sectors written + 8. the number of milliseconds spent writing + 9. the number of I/Os currently in progress + 10. the number of milliseconds spent doing I/Os + 11. the weighted number of milliseconds spent doing I/Os + + Additional counters: + 12. the total time spent reading in milliseconds + 13. the total time spent writing in milliseconds + + @stats_print_clear <region_id> [<starting_line> <number_of_lines>] + + Atomically print and then clear all the counters except the + in-flight i/o counters. Useful when the client consuming the + statistics does not want to lose any statistics (those updated + between printing and clearing). + + <region_id> + region_id returned from @stats_create + + <starting_line> + The index of the starting line in the output. + If omitted, all lines are printed and then cleared. + + <number_of_lines> + The number of lines to process. + If omitted, all lines are printed and then cleared. + + @stats_set_aux <region_id> <aux_data> + + Store auxiliary data aux_data for the specified region. + + <region_id> + region_id returned from @stats_create + + <aux_data> + The string that identifies data which is useful to the client + program that created the range. The kernel returns this + string back in the output of @stats_list message, but it + doesn't use this value for anything. + +Examples +======== + +Subdivide the DM device 'vol' into 100 pieces and start collecting +statistics on them: + + dmsetup message vol 0 @stats_create - /100 + +Set the auxillary data string to "foo bar baz" (the escape for each +space must also be escaped, otherwise the shell will consume them): + + dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz + +List the statistics: + + dmsetup message vol 0 @stats_list + +Print the statistics: + + dmsetup message vol 0 @stats_print 0 + +Delete the statistics: + + dmsetup message vol 0 @stats_delete 0 diff --git a/kernel/Documentation/device-mapper/striped.txt b/kernel/Documentation/device-mapper/striped.txt new file mode 100644 index 000000000..45f3b91ea --- /dev/null +++ b/kernel/Documentation/device-mapper/striped.txt @@ -0,0 +1,57 @@ +dm-stripe +========= + +Device-Mapper's "striped" target is used to create a striped (i.e. RAID-0) +device across one or more underlying devices. Data is written in "chunks", +with consecutive chunks rotating among the underlying devices. This can +potentially provide improved I/O throughput by utilizing several physical +devices in parallel. + +Parameters: <num devs> <chunk size> [<dev path> <offset>]+ + <num devs>: Number of underlying devices. + <chunk size>: Size of each chunk of data. Must be at least as + large as the system's PAGE_SIZE. + <dev path>: Full pathname to the underlying block-device, or a + "major:minor" device-number. + <offset>: Starting sector within the device. + +One or more underlying devices can be specified. The striped device size must +be a multiple of the chunk size multiplied by the number of underlying devices. + + +Example scripts +=============== + +[[ +#!/usr/bin/perl -w +# Create a striped device across any number of underlying devices. The device +# will be called "stripe_dev" and have a chunk-size of 128k. + +my $chunk_size = 128 * 2; +my $dev_name = "stripe_dev"; +my $num_devs = @ARGV; +my @devs = @ARGV; +my ($min_dev_size, $stripe_dev_size, $i); + +if (!$num_devs) { + die("Specify at least one device\n"); +} + +$min_dev_size = `blockdev --getsize $devs[0]`; +for ($i = 1; $i < $num_devs; $i++) { + my $this_size = `blockdev --getsize $devs[$i]`; + $min_dev_size = ($min_dev_size < $this_size) ? + $min_dev_size : $this_size; +} + +$stripe_dev_size = $min_dev_size * $num_devs; +$stripe_dev_size -= $stripe_dev_size % ($chunk_size * $num_devs); + +$table = "0 $stripe_dev_size striped $num_devs $chunk_size"; +for ($i = 0; $i < $num_devs; $i++) { + $table .= " $devs[$i] 0"; +} + +`echo $table | dmsetup create $dev_name`; +]] + diff --git a/kernel/Documentation/device-mapper/switch.txt b/kernel/Documentation/device-mapper/switch.txt new file mode 100644 index 000000000..424835e57 --- /dev/null +++ b/kernel/Documentation/device-mapper/switch.txt @@ -0,0 +1,138 @@ +dm-switch +========= + +The device-mapper switch target creates a device that supports an +arbitrary mapping of fixed-size regions of I/O across a fixed set of +paths. The path used for any specific region can be switched +dynamically by sending the target a message. + +It maps I/O to underlying block devices efficiently when there is a large +number of fixed-sized address regions but there is no simple pattern +that would allow for a compact representation of the mapping such as +dm-stripe. + +Background +---------- + +Dell EqualLogic and some other iSCSI storage arrays use a distributed +frameless architecture. In this architecture, the storage group +consists of a number of distinct storage arrays ("members") each having +independent controllers, disk storage and network adapters. When a LUN +is created it is spread across multiple members. The details of the +spreading are hidden from initiators connected to this storage system. +The storage group exposes a single target discovery portal, no matter +how many members are being used. When iSCSI sessions are created, each +session is connected to an eth port on a single member. Data to a LUN +can be sent on any iSCSI session, and if the blocks being accessed are +stored on another member the I/O will be forwarded as required. This +forwarding is invisible to the initiator. The storage layout is also +dynamic, and the blocks stored on disk may be moved from member to +member as needed to balance the load. + +This architecture simplifies the management and configuration of both +the storage group and initiators. In a multipathing configuration, it +is possible to set up multiple iSCSI sessions to use multiple network +interfaces on both the host and target to take advantage of the +increased network bandwidth. An initiator could use a simple round +robin algorithm to send I/O across all paths and let the storage array +members forward it as necessary, but there is a performance advantage to +sending data directly to the correct member. + +A device-mapper table already lets you map different regions of a +device onto different targets. However in this architecture the LUN is +spread with an address region size on the order of 10s of MBs, which +means the resulting table could have more than a million entries and +consume far too much memory. + +Using this device-mapper switch target we can now build a two-layer +device hierarchy: + + Upper Tier - Determine which array member the I/O should be sent to. + Lower Tier - Load balance amongst paths to a particular member. + +The lower tier consists of a single dm multipath device for each member. +Each of these multipath devices contains the set of paths directly to +the array member in one priority group, and leverages existing path +selectors to load balance amongst these paths. We also build a +non-preferred priority group containing paths to other array members for +failover reasons. + +The upper tier consists of a single dm-switch device. This device uses +a bitmap to look up the location of the I/O and choose the appropriate +lower tier device to route the I/O. By using a bitmap we are able to +use 4 bits for each address range in a 16 member group (which is very +large for us). This is a much denser representation than the dm table +b-tree can achieve. + +Construction Parameters +======================= + + <num_paths> <region_size> <num_optional_args> [<optional_args>...] + [<dev_path> <offset>]+ + +<num_paths> + The number of paths across which to distribute the I/O. + +<region_size> + The number of 512-byte sectors in a region. Each region can be redirected + to any of the available paths. + +<num_optional_args> + The number of optional arguments. Currently, no optional arguments + are supported and so this must be zero. + +<dev_path> + The block device that represents a specific path to the device. + +<offset> + The offset of the start of data on the specific <dev_path> (in units + of 512-byte sectors). This number is added to the sector number when + forwarding the request to the specific path. Typically it is zero. + +Messages +======== + +set_region_mappings <index>:<path_nr> [<index>]:<path_nr> [<index>]:<path_nr>... + +Modify the region table by specifying which regions are redirected to +which paths. + +<index> + The region number (region size was specified in constructor parameters). + If index is omitted, the next region (previous index + 1) is used. + Expressed in hexadecimal (WITHOUT any prefix like 0x). + +<path_nr> + The path number in the range 0 ... (<num_paths> - 1). + Expressed in hexadecimal (WITHOUT any prefix like 0x). + +R<n>,<m> + This parameter allows repetitive patterns to be loaded quickly. <n> and <m> + are hexadecimal numbers. The last <n> mappings are repeated in the next <m> + slots. + +Status +====== + +No status line is reported. + +Example +======= + +Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with +the same size. + +Create a switch device with 64kB region size: + dmsetup create switch --table "0 `blockdev --getsize /dev/vg1/switch0` + switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0" + +Set mappings for the first 7 entries to point to devices switch0, switch1, +switch2, switch0, switch1, switch2, switch1: + dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1 + +Set repetitive mapping. This command: + dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10 +is equivalent to: + dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \ + :1 :2 :1 :2 :1 :2 :1 :2 :1 :2 + diff --git a/kernel/Documentation/device-mapper/thin-provisioning.txt b/kernel/Documentation/device-mapper/thin-provisioning.txt new file mode 100644 index 000000000..4f67578b2 --- /dev/null +++ b/kernel/Documentation/device-mapper/thin-provisioning.txt @@ -0,0 +1,389 @@ +Introduction +============ + +This document describes a collection of device-mapper targets that +between them implement thin-provisioning and snapshots. + +The main highlight of this implementation, compared to the previous +implementation of snapshots, is that it allows many virtual devices to +be stored on the same data volume. This simplifies administration and +allows the sharing of data between volumes, thus reducing disk usage. + +Another significant feature is support for an arbitrary depth of +recursive snapshots (snapshots of snapshots of snapshots ...). The +previous implementation of snapshots did this by chaining together +lookup tables, and so performance was O(depth). This new +implementation uses a single data structure to avoid this degradation +with depth. Fragmentation may still be an issue, however, in some +scenarios. + +Metadata is stored on a separate device from data, giving the +administrator some freedom, for example to: + +- Improve metadata resilience by storing metadata on a mirrored volume + but data on a non-mirrored one. + +- Improve performance by storing the metadata on SSD. + +Status +====== + +These targets are very much still in the EXPERIMENTAL state. Please +do not yet rely on them in production. But do experiment and offer us +feedback. Different use cases will have different performance +characteristics, for example due to fragmentation of the data volume. + +If you find this software is not performing as expected please mail +dm-devel@redhat.com with details and we'll try our best to improve +things for you. + +Userspace tools for checking and repairing the metadata are under +development. + +Cookbook +======== + +This section describes some quick recipes for using thin provisioning. +They use the dmsetup program to control the device-mapper driver +directly. End users will be advised to use a higher-level volume +manager such as LVM2 once support has been added. + +Pool device +----------- + +The pool device ties together the metadata volume and the data volume. +It maps I/O linearly to the data volume and updates the metadata via +two mechanisms: + +- Function calls from the thin targets + +- Device-mapper 'messages' from userspace which control the creation of new + virtual devices amongst other things. + +Setting up a fresh pool device +------------------------------ + +Setting up a pool device requires a valid metadata device, and a +data device. If you do not have an existing metadata device you can +make one by zeroing the first 4k to indicate empty metadata. + + dd if=/dev/zero of=$metadata_dev bs=4096 count=1 + +The amount of metadata you need will vary according to how many blocks +are shared between thin devices (i.e. through snapshots). If you have +less sharing than average you'll need a larger-than-average metadata device. + +As a guide, we suggest you calculate the number of bytes to use in the +metadata device as 48 * $data_dev_size / $data_block_size but round it up +to 2MB if the answer is smaller. If you're creating large numbers of +snapshots which are recording large amounts of change, you may find you +need to increase this. + +The largest size supported is 16GB: If the device is larger, +a warning will be issued and the excess space will not be used. + +Reloading a pool table +---------------------- + +You may reload a pool's table, indeed this is how the pool is resized +if it runs out of space. (N.B. While specifying a different metadata +device when reloading is not forbidden at the moment, things will go +wrong if it does not route I/O to exactly the same on-disk location as +previously.) + +Using an existing pool device +----------------------------- + + dmsetup create pool \ + --table "0 20971520 thin-pool $metadata_dev $data_dev \ + $data_block_size $low_water_mark" + +$data_block_size gives the smallest unit of disk space that can be +allocated at a time expressed in units of 512-byte sectors. +$data_block_size must be between 128 (64KB) and 2097152 (1GB) and a +multiple of 128 (64KB). $data_block_size cannot be changed after the +thin-pool is created. People primarily interested in thin provisioning +may want to use a value such as 1024 (512KB). People doing lots of +snapshotting may want a smaller value such as 128 (64KB). If you are +not zeroing newly-allocated data, a larger $data_block_size in the +region of 256000 (128MB) is suggested. + +$low_water_mark is expressed in blocks of size $data_block_size. If +free space on the data device drops below this level then a dm event +will be triggered which a userspace daemon should catch allowing it to +extend the pool device. Only one such event will be sent. +Resuming a device with a new table itself triggers an event so the +userspace daemon can use this to detect a situation where a new table +already exceeds the threshold. + +A low water mark for the metadata device is maintained in the kernel and +will trigger a dm event if free space on the metadata device drops below +it. + +Updating on-disk metadata +------------------------- + +On-disk metadata is committed every time a FLUSH or FUA bio is written. +If no such requests are made then commits will occur every second. This +means the thin-provisioning target behaves like a physical disk that has +a volatile write cache. If power is lost you may lose some recent +writes. The metadata should always be consistent in spite of any crash. + +If data space is exhausted the pool will either error or queue IO +according to the configuration (see: error_if_no_space). If metadata +space is exhausted or a metadata operation fails: the pool will error IO +until the pool is taken offline and repair is performed to 1) fix any +potential inconsistencies and 2) clear the flag that imposes repair. +Once the pool's metadata device is repaired it may be resized, which +will allow the pool to return to normal operation. Note that if a pool +is flagged as needing repair, the pool's data and metadata devices +cannot be resized until repair is performed. It should also be noted +that when the pool's metadata space is exhausted the current metadata +transaction is aborted. Given that the pool will cache IO whose +completion may have already been acknowledged to upper IO layers +(e.g. filesystem) it is strongly suggested that consistency checks +(e.g. fsck) be performed on those layers when repair of the pool is +required. + +Thin provisioning +----------------- + +i) Creating a new thinly-provisioned volume. + + To create a new thinly- provisioned volume you must send a message to an + active pool device, /dev/mapper/pool in this example. + + dmsetup message /dev/mapper/pool 0 "create_thin 0" + + Here '0' is an identifier for the volume, a 24-bit number. It's up + to the caller to allocate and manage these identifiers. If the + identifier is already in use, the message will fail with -EEXIST. + +ii) Using a thinly-provisioned volume. + + Thinly-provisioned volumes are activated using the 'thin' target: + + dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0" + + The last parameter is the identifier for the thinp device. + +Internal snapshots +------------------ + +i) Creating an internal snapshot. + + Snapshots are created with another message to the pool. + + N.B. If the origin device that you wish to snapshot is active, you + must suspend it before creating the snapshot to avoid corruption. + This is NOT enforced at the moment, so please be careful! + + dmsetup suspend /dev/mapper/thin + dmsetup message /dev/mapper/pool 0 "create_snap 1 0" + dmsetup resume /dev/mapper/thin + + Here '1' is the identifier for the volume, a 24-bit number. '0' is the + identifier for the origin device. + +ii) Using an internal snapshot. + + Once created, the user doesn't have to worry about any connection + between the origin and the snapshot. Indeed the snapshot is no + different from any other thinly-provisioned device and can be + snapshotted itself via the same method. It's perfectly legal to + have only one of them active, and there's no ordering requirement on + activating or removing them both. (This differs from conventional + device-mapper snapshots.) + + Activate it exactly the same way as any other thinly-provisioned volume: + + dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1" + +External snapshots +------------------ + +You can use an external _read only_ device as an origin for a +thinly-provisioned volume. Any read to an unprovisioned area of the +thin device will be passed through to the origin. Writes trigger +the allocation of new blocks as usual. + +One use case for this is VM hosts that want to run guests on +thinly-provisioned volumes but have the base image on another device +(possibly shared between many VMs). + +You must not write to the origin device if you use this technique! +Of course, you may write to the thin device and take internal snapshots +of the thin volume. + +i) Creating a snapshot of an external device + + This is the same as creating a thin device. + You don't mention the origin at this stage. + + dmsetup message /dev/mapper/pool 0 "create_thin 0" + +ii) Using a snapshot of an external device. + + Append an extra parameter to the thin target specifying the origin: + + dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 0 /dev/image" + + N.B. All descendants (internal snapshots) of this snapshot require the + same extra origin parameter. + +Deactivation +------------ + +All devices using a pool must be deactivated before the pool itself +can be. + + dmsetup remove thin + dmsetup remove snap + dmsetup remove pool + +Reference +========= + +'thin-pool' target +------------------ + +i) Constructor + + thin-pool <metadata dev> <data dev> <data block size (sectors)> \ + <low water mark (blocks)> [<number of feature args> [<arg>]*] + + Optional feature arguments: + + skip_block_zeroing: Skip the zeroing of newly-provisioned blocks. + + ignore_discard: Disable discard support. + + no_discard_passdown: Don't pass discards down to the underlying + data device, but just remove the mapping. + + read_only: Don't allow any changes to be made to the pool + metadata. + + error_if_no_space: Error IOs, instead of queueing, if no space. + + Data block size must be between 64KB (128 sectors) and 1GB + (2097152 sectors) inclusive. + + +ii) Status + + <transaction id> <used metadata blocks>/<total metadata blocks> + <used data blocks>/<total data blocks> <held metadata root> + [no_]discard_passdown ro|rw + + transaction id: + A 64-bit number used by userspace to help synchronise with metadata + from volume managers. + + used data blocks / total data blocks + If the number of free blocks drops below the pool's low water mark a + dm event will be sent to userspace. This event is edge-triggered and + it will occur only once after each resume so volume manager writers + should register for the event and then check the target's status. + + held metadata root: + The location, in blocks, of the metadata root that has been + 'held' for userspace read access. '-' indicates there is no + held root. + + discard_passdown|no_discard_passdown + Whether or not discards are actually being passed down to the + underlying device. When this is enabled when loading the table, + it can get disabled if the underlying device doesn't support it. + + ro|rw + If the pool encounters certain types of device failures it will + drop into a read-only metadata mode in which no changes to + the pool metadata (like allocating new blocks) are permitted. + + In serious cases where even a read-only mode is deemed unsafe + no further I/O will be permitted and the status will just + contain the string 'Fail'. The userspace recovery tools + should then be used. + + error_if_no_space|queue_if_no_space + If the pool runs out of data or metadata space, the pool will + either queue or error the IO destined to the data device. The + default is to queue the IO until more space is added or the + 'no_space_timeout' expires. The 'no_space_timeout' dm-thin-pool + module parameter can be used to change this timeout -- it + defaults to 60 seconds but may be disabled using a value of 0. + +iii) Messages + + create_thin <dev id> + + Create a new thinly-provisioned device. + <dev id> is an arbitrary unique 24-bit identifier chosen by + the caller. + + create_snap <dev id> <origin id> + + Create a new snapshot of another thinly-provisioned device. + <dev id> is an arbitrary unique 24-bit identifier chosen by + the caller. + <origin id> is the identifier of the thinly-provisioned device + of which the new device will be a snapshot. + + delete <dev id> + + Deletes a thin device. Irreversible. + + set_transaction_id <current id> <new id> + + Userland volume managers, such as LVM, need a way to + synchronise their external metadata with the internal metadata of the + pool target. The thin-pool target offers to store an + arbitrary 64-bit transaction id and return it on the target's + status line. To avoid races you must provide what you think + the current transaction id is when you change it with this + compare-and-swap message. + + reserve_metadata_snap + + Reserve a copy of the data mapping btree for use by userland. + This allows userland to inspect the mappings as they were when + this message was executed. Use the pool's status command to + get the root block associated with the metadata snapshot. + + release_metadata_snap + + Release a previously reserved copy of the data mapping btree. + +'thin' target +------------- + +i) Constructor + + thin <pool dev> <dev id> [<external origin dev>] + + pool dev: + the thin-pool device, e.g. /dev/mapper/my_pool or 253:0 + + dev id: + the internal device identifier of the device to be + activated. + + external origin dev: + an optional block device outside the pool to be treated as a + read-only snapshot origin: reads to unprovisioned areas of the + thin target will be mapped to this device. + +The pool doesn't store any size against the thin devices. If you +load a thin target that is smaller than you've been using previously, +then you'll have no access to blocks mapped beyond the end. If you +load a target that is bigger than before, then extra blocks will be +provisioned as and when needed. + +ii) Status + + <nr mapped sectors> <highest mapped sector> + + If the pool has encountered device errors and failed, the status + will just contain the string 'Fail'. The userspace recovery + tools should then be used. diff --git a/kernel/Documentation/device-mapper/verity.txt b/kernel/Documentation/device-mapper/verity.txt new file mode 100644 index 000000000..e15bc1a0f --- /dev/null +++ b/kernel/Documentation/device-mapper/verity.txt @@ -0,0 +1,172 @@ +dm-verity +========== + +Device-Mapper's "verity" target provides transparent integrity checking of +block devices using a cryptographic digest provided by the kernel crypto API. +This target is read-only. + +Construction Parameters +======================= + <version> <dev> <hash_dev> + <data_block_size> <hash_block_size> + <num_data_blocks> <hash_start_block> + <algorithm> <digest> <salt> + [<#opt_params> <opt_params>] + +<version> + This is the type of the on-disk hash format. + + 0 is the original format used in the Chromium OS. + The salt is appended when hashing, digests are stored continuously and + the rest of the block is padded with zeros. + + 1 is the current format that should be used for new devices. + The salt is prepended when hashing and each digest is + padded with zeros to the power of two. + +<dev> + This is the device containing data, the integrity of which needs to be + checked. It may be specified as a path, like /dev/sdaX, or a device number, + <major>:<minor>. + +<hash_dev> + This is the device that supplies the hash tree data. It may be + specified similarly to the device path and may be the same device. If the + same device is used, the hash_start should be outside the configured + dm-verity device. + +<data_block_size> + The block size on a data device in bytes. + Each block corresponds to one digest on the hash device. + +<hash_block_size> + The size of a hash block in bytes. + +<num_data_blocks> + The number of data blocks on the data device. Additional blocks are + inaccessible. You can place hashes to the same partition as data, in this + case hashes are placed after <num_data_blocks>. + +<hash_start_block> + This is the offset, in <hash_block_size>-blocks, from the start of hash_dev + to the root block of the hash tree. + +<algorithm> + The cryptographic hash algorithm used for this device. This should + be the name of the algorithm, like "sha1". + +<digest> + The hexadecimal encoding of the cryptographic hash of the root hash block + and the salt. This hash should be trusted as there is no other authenticity + beyond this point. + +<salt> + The hexadecimal encoding of the salt value. + +<#opt_params> + Number of optional parameters. If there are no optional parameters, + the optional paramaters section can be skipped or #opt_params can be zero. + Otherwise #opt_params is the number of following arguments. + + Example of optional parameters section: + 1 ignore_corruption + +ignore_corruption + Log corrupted blocks, but allow read operations to proceed normally. + +restart_on_corruption + Restart the system when a corrupted block is discovered. This option is + not compatible with ignore_corruption and requires user space support to + avoid restart loops. + +Theory of operation +=================== + +dm-verity is meant to be set up as part of a verified boot path. This +may be anything ranging from a boot using tboot or trustedgrub to just +booting from a known-good device (like a USB drive or CD). + +When a dm-verity device is configured, it is expected that the caller +has been authenticated in some way (cryptographic signatures, etc). +After instantiation, all hashes will be verified on-demand during +disk access. If they cannot be verified up to the root node of the +tree, the root hash, then the I/O will fail. This should detect +tampering with any data on the device and the hash data. + +Cryptographic hashes are used to assert the integrity of the device on a +per-block basis. This allows for a lightweight hash computation on first read +into the page cache. Block hashes are stored linearly, aligned to the nearest +block size. + +Hash Tree +--------- + +Each node in the tree is a cryptographic hash. If it is a leaf node, the hash +of some data block on disk is calculated. If it is an intermediary node, +the hash of a number of child nodes is calculated. + +Each entry in the tree is a collection of neighboring nodes that fit in one +block. The number is determined based on block_size and the size of the +selected cryptographic digest algorithm. The hashes are linearly-ordered in +this entry and any unaligned trailing space is ignored but included when +calculating the parent node. + +The tree looks something like: + +alg = sha256, num_blocks = 32768, block_size = 4096 + + [ root ] + / . . . \ + [entry_0] [entry_1] + / . . . \ . . . \ + [entry_0_0] . . . [entry_0_127] . . . . [entry_1_127] + / ... \ / . . . \ / \ + blk_0 ... blk_127 blk_16256 blk_16383 blk_32640 . . . blk_32767 + + +On-disk format +============== + +The verity kernel code does not read the verity metadata on-disk header. +It only reads the hash blocks which directly follow the header. +It is expected that a user-space tool will verify the integrity of the +verity header. + +Alternatively, the header can be omitted and the dmsetup parameters can +be passed via the kernel command-line in a rooted chain of trust where +the command-line is verified. + +Directly following the header (and with sector number padded to the next hash +block boundary) are the hash blocks which are stored a depth at a time +(starting from the root), sorted in order of increasing index. + +The full specification of kernel parameters and on-disk metadata format +is available at the cryptsetup project's wiki page + https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity + +Status +====== +V (for Valid) is returned if every check performed so far was valid. +If any check failed, C (for Corruption) is returned. + +Example +======= +Set up a device: + # dmsetup create vroot --readonly --table \ + "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\ + "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\ + "1234000000000000000000000000000000000000000000000000000000000000" + +A command line tool veritysetup is available to compute or verify +the hash tree or activate the kernel device. This is available from +the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/ +(as a libcryptsetup extension). + +Create hash on the device: + # veritysetup format /dev/sda1 /dev/sda2 + ... + Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 + +Activate the device: + # veritysetup create vroot /dev/sda1 /dev/sda2 \ + 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 diff --git a/kernel/Documentation/device-mapper/zero.txt b/kernel/Documentation/device-mapper/zero.txt new file mode 100644 index 000000000..20fb38e7f --- /dev/null +++ b/kernel/Documentation/device-mapper/zero.txt @@ -0,0 +1,37 @@ +dm-zero +======= + +Device-Mapper's "zero" target provides a block-device that always returns +zero'd data on reads and silently drops writes. This is similar behavior to +/dev/zero, but as a block-device instead of a character-device. + +Dm-zero has no target-specific parameters. + +One very interesting use of dm-zero is for creating "sparse" devices in +conjunction with dm-snapshot. A sparse device reports a device-size larger +than the amount of actual storage space available for that device. A user can +write data anywhere within the sparse device and read it back like a normal +device. Reads to previously unwritten areas will return a zero'd buffer. When +enough data has been written to fill up the actual storage space, the sparse +device is deactivated. This can be very useful for testing device and +filesystem limitations. + +To create a sparse device, start by creating a dm-zero device that's the +desired size of the sparse device. For this example, we'll assume a 10TB +sparse device. + +TEN_TERABYTES=`expr 10 \* 1024 \* 1024 \* 1024 \* 2` # 10 TB in sectors +echo "0 $TEN_TERABYTES zero" | dmsetup create zero1 + +Then create a snapshot of the zero device, using any available block-device as +the COW device. The size of the COW device will determine the amount of real +space available to the sparse device. For this example, we'll assume /dev/sdb1 +is an available 10GB partition. + +echo "0 $TEN_TERABYTES snapshot /dev/mapper/zero1 /dev/sdb1 p 128" | \ + dmsetup create sparse1 + +This will create a 10TB sparse device called /dev/mapper/sparse1 that has +10GB of actual storage space available. If more than 10GB of data is written +to this device, it will start returning I/O errors. + |