summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/arm/Booting
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/arm/Booting')
-rw-r--r--kernel/Documentation/arm/Booting218
1 files changed, 218 insertions, 0 deletions
diff --git a/kernel/Documentation/arm/Booting b/kernel/Documentation/arm/Booting
new file mode 100644
index 000000000..83c1df2fc
--- /dev/null
+++ b/kernel/Documentation/arm/Booting
@@ -0,0 +1,218 @@
+ Booting ARM Linux
+ =================
+
+Author: Russell King
+Date : 18 May 2002
+
+The following documentation is relevant to 2.4.18-rmk6 and beyond.
+
+In order to boot ARM Linux, you require a boot loader, which is a small
+program that runs before the main kernel. The boot loader is expected
+to initialise various devices, and eventually call the Linux kernel,
+passing information to the kernel.
+
+Essentially, the boot loader should provide (as a minimum) the
+following:
+
+1. Setup and initialise the RAM.
+2. Initialise one serial port.
+3. Detect the machine type.
+4. Setup the kernel tagged list.
+5. Load initramfs.
+6. Call the kernel image.
+
+
+1. Setup and initialise RAM
+---------------------------
+
+Existing boot loaders: MANDATORY
+New boot loaders: MANDATORY
+
+The boot loader is expected to find and initialise all RAM that the
+kernel will use for volatile data storage in the system. It performs
+this in a machine dependent manner. (It may use internal algorithms
+to automatically locate and size all RAM, or it may use knowledge of
+the RAM in the machine, or any other method the boot loader designer
+sees fit.)
+
+
+2. Initialise one serial port
+-----------------------------
+
+Existing boot loaders: OPTIONAL, RECOMMENDED
+New boot loaders: OPTIONAL, RECOMMENDED
+
+The boot loader should initialise and enable one serial port on the
+target. This allows the kernel serial driver to automatically detect
+which serial port it should use for the kernel console (generally
+used for debugging purposes, or communication with the target.)
+
+As an alternative, the boot loader can pass the relevant 'console='
+option to the kernel via the tagged lists specifying the port, and
+serial format options as described in
+
+ Documentation/kernel-parameters.txt.
+
+
+3. Detect the machine type
+--------------------------
+
+Existing boot loaders: OPTIONAL
+New boot loaders: MANDATORY except for DT-only platforms
+
+The boot loader should detect the machine type its running on by some
+method. Whether this is a hard coded value or some algorithm that
+looks at the connected hardware is beyond the scope of this document.
+The boot loader must ultimately be able to provide a MACH_TYPE_xxx
+value to the kernel. (see linux/arch/arm/tools/mach-types). This
+should be passed to the kernel in register r1.
+
+For DT-only platforms, the machine type will be determined by device
+tree. set the machine type to all ones (~0). This is not strictly
+necessary, but assures that it will not match any existing types.
+
+4. Setup boot data
+------------------
+
+Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED
+New boot loaders: MANDATORY
+
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel. The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
+The boot loader must create and initialise the kernel tagged list.
+A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
+The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag
+has the size field set to '2' (0x00000002). The ATAG_NONE must set
+the size field to zero.
+
+Any number of tags can be placed in the list. It is undefined
+whether a repeated tag appends to the information carried by the
+previous tag, or whether it replaces the information in its
+entirety; some tags behave as the former, others the latter.
+
+The boot loader must pass at a minimum the size and location of
+the system memory, and root filesystem location. Therefore, the
+minimum tagged list should look:
+
+ +-----------+
+base -> | ATAG_CORE | |
+ +-----------+ |
+ | ATAG_MEM | | increasing address
+ +-----------+ |
+ | ATAG_NONE | |
+ +-----------+ v
+
+The tagged list should be stored in system RAM.
+
+The tagged list must be placed in a region of memory where neither
+the kernel decompressor nor initrd 'bootp' program will overwrite
+it. The recommended placement is in the first 16KiB of RAM.
+
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data. The
+dtb format is documented in Documentation/devicetree/booting-without-of.txt.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location. The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it, whilst remaining within the region which will be covered
+by the kernel's low-memory mapping.
+
+A safe location is just above the 128MiB boundary from start of RAM.
+
+5. Load initramfs.
+------------------
+
+Existing boot loaders: OPTIONAL
+New boot loaders: OPTIONAL
+
+If an initramfs is in use then, as with the dtb, it must be placed in
+a region of memory where the kernel decompressor will not overwrite it
+while also with the region which will be covered by the kernel's
+low-memory mapping.
+
+A safe location is just above the device tree blob which itself will
+be loaded just above the 128MiB boundary from the start of RAM as
+recommended above.
+
+6. Calling the kernel image
+---------------------------
+
+Existing boot loaders: MANDATORY
+New boot loaders: MANDATORY
+
+There are two options for calling the kernel zImage. If the zImage
+is stored in flash, and is linked correctly to be run from flash,
+then it is legal for the boot loader to call the zImage in flash
+directly.
+
+The zImage may also be placed in system RAM and called there. The
+kernel should be placed in the first 128MiB of RAM. It is recommended
+that it is loaded above 32MiB in order to avoid the need to relocate
+prior to decompression, which will make the boot process slightly
+faster.
+
+When booting a raw (non-zImage) kernel the constraints are tighter.
+In this case the kernel must be loaded at an offset into system equal
+to TEXT_OFFSET - PAGE_OFFSET.
+
+In any case, the following conditions must be met:
+
+- Quiesce all DMA capable devices so that memory does not get
+ corrupted by bogus network packets or disk data. This will save
+ you many hours of debug.
+
+- CPU register settings
+ r0 = 0,
+ r1 = machine type number discovered in (3) above.
+ r2 = physical address of tagged list in system RAM, or
+ physical address of device tree block (dtb) in system RAM
+
+- CPU mode
+ All forms of interrupts must be disabled (IRQs and FIQs)
+
+ For CPUs which do not include the ARM virtualization extensions, the
+ CPU must be in SVC mode. (A special exception exists for Angel)
+
+ CPUs which include support for the virtualization extensions can be
+ entered in HYP mode in order to enable the kernel to make full use of
+ these extensions. This is the recommended boot method for such CPUs,
+ unless the virtualisations are already in use by a pre-installed
+ hypervisor.
+
+ If the kernel is not entered in HYP mode for any reason, it must be
+ entered in SVC mode.
+
+- Caches, MMUs
+ The MMU must be off.
+ Instruction cache may be on or off.
+ Data cache must be off.
+
+ If the kernel is entered in HYP mode, the above requirements apply to
+ the HYP mode configuration in addition to the ordinary PL1 (privileged
+ kernel modes) configuration. In addition, all traps into the
+ hypervisor must be disabled, and PL1 access must be granted for all
+ peripherals and CPU resources for which this is architecturally
+ possible. Except for entering in HYP mode, the system configuration
+ should be such that a kernel which does not include support for the
+ virtualization extensions can boot correctly without extra help.
+
+- The boot loader is expected to call the kernel image by jumping
+ directly to the first instruction of the kernel image.
+
+ On CPUs supporting the ARM instruction set, the entry must be
+ made in ARM state, even for a Thumb-2 kernel.
+
+ On CPUs supporting only the Thumb instruction set such as
+ Cortex-M class CPUs, the entry must be made in Thumb state.