diff options
Diffstat (limited to 'kernel/Documentation/DocBook/z8530book.tmpl')
| -rw-r--r-- | kernel/Documentation/DocBook/z8530book.tmpl | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/kernel/Documentation/DocBook/z8530book.tmpl b/kernel/Documentation/DocBook/z8530book.tmpl new file mode 100644 index 000000000..6f3883be8 --- /dev/null +++ b/kernel/Documentation/DocBook/z8530book.tmpl @@ -0,0 +1,371 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="Z85230Guide"> + <bookinfo> + <title>Z8530 Programming Guide</title> + + <authorgroup> + <author> + <firstname>Alan</firstname> + <surname>Cox</surname> + <affiliation> + <address> + <email>alan@lxorguk.ukuu.org.uk</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2000</year> + <holder>Alan Cox</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + The Z85x30 family synchronous/asynchronous controller chips are + used on a large number of cheap network interface cards. The + kernel provides a core interface layer that is designed to make + it easy to provide WAN services using this chip. + </para> + <para> + The current driver only support synchronous operation. Merging the + asynchronous driver support into this code to allow any Z85x30 + device to be used as both a tty interface and as a synchronous + controller is a project for Linux post the 2.4 release + </para> + </chapter> + + <chapter id="Driver_Modes"> + <title>Driver Modes</title> + <para> + The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices + in three different modes. Each mode can be applied to an individual + channel on the chip (each chip has two channels). + </para> + <para> + The PIO synchronous mode supports the most common Z8530 wiring. Here + the chip is interface to the I/O and interrupt facilities of the + host machine but not to the DMA subsystem. When running PIO the + Z8530 has extremely tight timing requirements. Doing high speeds, + even with a Z85230 will be tricky. Typically you should expect to + achieve at best 9600 baud with a Z8C530 and 64Kbits with a Z85230. + </para> + <para> + The DMA mode supports the chip when it is configured to use dual DMA + channels on an ISA bus. The better cards tend to support this mode + of operation for a single channel. With DMA running the Z85230 tops + out when it starts to hit ISA DMA constraints at about 512Kbits. It + is worth noting here that many PC machines hang or crash when the + chip is driven fast enough to hold the ISA bus solid. + </para> + <para> + Transmit DMA mode uses a single DMA channel. The DMA channel is used + for transmission as the transmit FIFO is smaller than the receive + FIFO. it gives better performance than pure PIO mode but is nowhere + near as ideal as pure DMA mode. + </para> + </chapter> + + <chapter id="Using_the_Z85230_driver"> + <title>Using the Z85230 driver</title> + <para> + The Z85230 driver provides the back end interface to your board. To + configure a Z8530 interface you need to detect the board and to + identify its ports and interrupt resources. It is also your problem + to verify the resources are available. + </para> + <para> + Having identified the chip you need to fill in a struct z8530_dev, + which describes each chip. This object must exist until you finally + shutdown the board. Firstly zero the active field. This ensures + nothing goes off without you intending it. The irq field should + be set to the interrupt number of the chip. (Each chip has a single + interrupt source rather than each channel). You are responsible + for allocating the interrupt line. The interrupt handler should be + set to <function>z8530_interrupt</function>. The device id should + be set to the z8530_dev structure pointer. Whether the interrupt can + be shared or not is board dependent, and up to you to initialise. + </para> + <para> + The structure holds two channel structures. + Initialise chanA.ctrlio and chanA.dataio with the address of the + control and data ports. You can or this with Z8530_PORT_SLEEP to + indicate your interface needs the 5uS delay for chip settling done + in software. The PORT_SLEEP option is architecture specific. Other + flags may become available on future platforms, eg for MMIO. + Initialise the chanA.irqs to &z8530_nop to start the chip up + as disabled and discarding interrupt events. This ensures that + stray interrupts will be mopped up and not hang the bus. Set + chanA.dev to point to the device structure itself. The + private and name field you may use as you wish. The private field + is unused by the Z85230 layer. The name is used for error reporting + and it may thus make sense to make it match the network name. + </para> + <para> + Repeat the same operation with the B channel if your chip has + both channels wired to something useful. This isn't always the + case. If it is not wired then the I/O values do not matter, but + you must initialise chanB.dev. + </para> + <para> + If your board has DMA facilities then initialise the txdma and + rxdma fields for the relevant channels. You must also allocate the + ISA DMA channels and do any necessary board level initialisation + to configure them. The low level driver will do the Z8530 and + DMA controller programming but not board specific magic. + </para> + <para> + Having initialised the device you can then call + <function>z8530_init</function>. This will probe the chip and + reset it into a known state. An identification sequence is then + run to identify the chip type. If the checks fail to pass the + function returns a non zero error code. Typically this indicates + that the port given is not valid. After this call the + type field of the z8530_dev structure is initialised to either + Z8530, Z85C30 or Z85230 according to the chip found. + </para> + <para> + Once you have called z8530_init you can also make use of the utility + function <function>z8530_describe</function>. This provides a + consistent reporting format for the Z8530 devices, and allows all + the drivers to provide consistent reporting. + </para> + </chapter> + + <chapter id="Attaching_Network_Interfaces"> + <title>Attaching Network Interfaces</title> + <para> + If you wish to use the network interface facilities of the driver, + then you need to attach a network device to each channel that is + present and in use. In addition to use the generic HDLC + you need to follow some additional plumbing rules. They may seem + complex but a look at the example hostess_sv11 driver should + reassure you. + </para> + <para> + The network device used for each channel should be pointed to by + the netdevice field of each channel. The hdlc-> priv field of the + network device points to your private data - you will need to be + able to find your private data from this. + </para> + <para> + The way most drivers approach this particular problem is to + create a structure holding the Z8530 device definition and + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. + </para> + <para> + If you wish to use the generic HDLC then you need to register + the HDLC device. + </para> + <para> + Before you register your network device you will also need to + provide suitable handlers for most of the network device callbacks. + See the network device documentation for more details on this. + </para> + </chapter> + + <chapter id="Configuring_And_Activating_The_Port"> + <title>Configuring And Activating The Port</title> + <para> + The Z85230 driver provides helper functions and tables to load the + port registers on the Z8530 chips. When programming the register + settings for a channel be aware that the documentation recommends + initialisation orders. Strange things happen when these are not + followed. + </para> + <para> + <function>z8530_channel_load</function> takes an array of + pairs of initialisation values in an array of u8 type. The first + value is the Z8530 register number. Add 16 to indicate the alternate + register bank on the later chips. The array is terminated by a 255. + </para> + <para> + The driver provides a pair of public tables. The + z8530_hdlc_kilostream table is for the UK 'Kilostream' service and + also happens to cover most other end host configurations. The + z8530_hdlc_kilostream_85230 table is the same configuration using + the enhancements of the 85230 chip. The configuration loaded is + standard NRZ encoded synchronous data with HDLC bitstuffing. All + of the timing is taken from the other end of the link. + </para> + <para> + When writing your own tables be aware that the driver internally + tracks register values. It may need to reload values. You should + therefore be sure to set registers 1-7, 9-11, 14 and 15 in all + configurations. Where the register settings depend on DMA selection + the driver will update the bits itself when you open or close. + Loading a new table with the interface open is not recommended. + </para> + <para> + There are three standard configurations supported by the core + code. In PIO mode the interface is programmed up to use + interrupt driven PIO. This places high demands on the host processor + to avoid latency. The driver is written to take account of latency + issues but it cannot avoid latencies caused by other drivers, + notably IDE in PIO mode. Because the drivers allocate buffers you + must also prevent MTU changes while the port is open. + </para> + <para> + Once the port is open it will call the rx_function of each channel + whenever a completed packet arrived. This is invoked from + interrupt context and passes you the channel and a network + buffer (struct sk_buff) holding the data. The data includes + the CRC bytes so most users will want to trim the last two + bytes before processing the data. This function is very timing + critical. When you wish to simply discard data the support + code provides the function <function>z8530_null_rx</function> + to discard the data. + </para> + <para> + To active PIO mode sending and receiving the <function> + z8530_sync_open</function> is called. This expects to be passed + the network device and the channel. Typically this is called from + your network device open callback. On a failure a non zero error + status is returned. The <function>z8530_sync_close</function> + function shuts down a PIO channel. This must be done before the + channel is opened again and before the driver shuts down + and unloads. + </para> + <para> + The ideal mode of operation is dual channel DMA mode. Here the + kernel driver will configure the board for DMA in both directions. + The driver also handles ISA DMA issues such as controller + programming and the memory range limit for you. This mode is + activated by calling the <function>z8530_sync_dma_open</function> + function. On failure a non zero error value is returned. + Once this mode is activated it can be shut down by calling the + <function>z8530_sync_dma_close</function>. You must call the close + function matching the open mode you used. + </para> + <para> + The final supported mode uses a single DMA channel to drive the + transmit side. As the Z85C30 has a larger FIFO on the receive + channel this tends to increase the maximum speed a little. + This is activated by calling the <function>z8530_sync_txdma_open + </function>. This returns a non zero error code on failure. The + <function>z8530_sync_txdma_close</function> function closes down + the Z8530 interface from this mode. + </para> + </chapter> + + <chapter id="Network_Layer_Functions"> + <title>Network Layer Functions</title> + <para> + The Z8530 layer provides functions to queue packets for + transmission. The driver internally buffers the frame currently + being transmitted and one further frame (in order to keep back + to back transmission running). Any further buffering is up to + the caller. + </para> + <para> + The function <function>z8530_queue_xmit</function> takes a network + buffer in sk_buff format and queues it for transmission. The + caller must provide the entire packet with the exception of the + bitstuffing and CRC. This is normally done by the caller via + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. + </para> + <para> + The function <function>z8530_get_stats</function> returns a pointer + to an internally maintained per interface statistics block. This + provides most of the interface code needed to implement the network + layer get_stats callback. + </para> + </chapter> + + <chapter id="Porting_The_Z8530_Driver"> + <title>Porting The Z8530 Driver</title> + <para> + The Z8530 driver is written to be portable. In DMA mode it makes + assumptions about the use of ISA DMA. These are probably warranted + in most cases as the Z85230 in particular was designed to glue to PC + type machines. The PIO mode makes no real assumptions. + </para> + <para> + Should you need to retarget the Z8530 driver to another architecture + the only code that should need changing are the port I/O functions. + At the moment these assume PC I/O port accesses. This may not be + appropriate for all platforms. Replacing + <function>z8530_read_port</function> and <function>z8530_write_port + </function> is intended to be all that is required to port this + driver layer. + </para> + </chapter> + + <chapter id="bugs"> + <title>Known Bugs And Assumptions</title> + <para> + <variablelist> + <varlistentry><term>Interrupt Locking</term> + <listitem> + <para> + The locking in the driver is done via the global cli/sti lock. This + makes for relatively poor SMP performance. Switching this to use a + per device spin lock would probably materially improve performance. + </para> + </listitem></varlistentry> + + <varlistentry><term>Occasional Failures</term> + <listitem> + <para> + We have reports of occasional failures when run for very long + periods of time and the driver starts to receive junk frames. At + the moment the cause of this is not clear. + </para> + </listitem></varlistentry> + </variablelist> + + </para> + </chapter> + + <chapter id="pubfunctions"> + <title>Public Functions Provided</title> +!Edrivers/net/wan/z85230.c + </chapter> + + <chapter id="intfunctions"> + <title>Internal Functions</title> +!Idrivers/net/wan/z85230.c + </chapter> + +</book> |