summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/ABI/testing
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/Documentation/ABI/testing')
-rw-r--r--kernel/Documentation/ABI/testing/configfs-spear-pcie-gadget2
-rw-r--r--kernel/Documentation/ABI/testing/configfs-stp-policy48
-rw-r--r--kernel/Documentation/ABI/testing/dev-kmsg9
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-ata2
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-block7
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x85
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x450
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-fcoe12
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio149
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-adc-hi843543
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x7
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x9
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-meas-spec8
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs31
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-iio-vf6107
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth49
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc33
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti24
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices13
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-mei23
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio8
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-usb36
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-bus-usb-lvstest12
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-cxl43
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-fpga-manager37
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-mic.txt29
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-net19
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-net-janz-ican319
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-power58
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-power-twl403045
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-scsi_tape109
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-stm14
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-stm_source11
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-class-zram24
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-devices-system-cpu2
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-corsair15
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff8
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo53
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku153
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus96
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure105
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus49
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua7
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra49
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos178
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu76
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-ppi19
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-st12
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-sunxi-sid22
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-toshiba_haps20
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-driver-wacom19
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-firmware-dmi-entries (renamed from kernel/Documentation/ABI/testing/sysfs-firmware-dmi)2
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-firmware-dmi-tables22
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-firmware-efi10
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-firmware-efi-esrt81
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-fs-f2fs12
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-gpio3
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-hypervisor-pmu23
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-platform-twl4030-usb8
-rw-r--r--kernel/Documentation/ABI/testing/sysfs-power12
60 files changed, 1686 insertions, 845 deletions
diff --git a/kernel/Documentation/ABI/testing/configfs-spear-pcie-gadget b/kernel/Documentation/ABI/testing/configfs-spear-pcie-gadget
index 875988146..840c324ef 100644
--- a/kernel/Documentation/ABI/testing/configfs-spear-pcie-gadget
+++ b/kernel/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -1,7 +1,7 @@
What: /config/pcie-gadget
Date: Feb 2011
KernelVersion: 2.6.37
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Interface is used to configure selected dual mode PCIe controller
diff --git a/kernel/Documentation/ABI/testing/configfs-stp-policy b/kernel/Documentation/ABI/testing/configfs-stp-policy
new file mode 100644
index 000000000..421ce6825
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/configfs-stp-policy
@@ -0,0 +1,48 @@
+What: /config/stp-policy
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ This group contains policies mandating Master/Channel allocation
+ for software sources wishing to send trace data over an STM
+ device.
+
+What: /config/stp-policy/<device>.<policy>
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ This group is the root of a policy; its name is a concatenation
+ of an stm device name to which this policy applies and an
+ arbitrary string. If <device> part doesn't match an existing
+ stm device, mkdir will fail with ENODEV; if that device already
+ has a policy assigned to it, mkdir will fail with EBUSY.
+
+What: /config/stp-policy/<device>.<policy>/device
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ STM device to which this policy applies, read only. Same as the
+ <device> component of its parent directory.
+
+What: /config/stp-policy/<device>.<policy>/<node>
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ Policy node is a string identifier that software clients will
+ use to request a master/channel to be allocated and assigned to
+ them.
+
+What: /config/stp-policy/<device>.<policy>/<node>/masters
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ Range of masters from which to allocate for users of this node.
+ Write two numbers: the first master and the last master number.
+
+What: /config/stp-policy/<device>.<policy>/<node>/channels
+Date: June 2015
+KernelVersion: 4.3
+Description:
+ Range of channels from which to allocate for users of this node.
+ Write two numbers: the first channel and the last channel
+ number.
+
diff --git a/kernel/Documentation/ABI/testing/dev-kmsg b/kernel/Documentation/ABI/testing/dev-kmsg
index bb820be48..fff817efa 100644
--- a/kernel/Documentation/ABI/testing/dev-kmsg
+++ b/kernel/Documentation/ABI/testing/dev-kmsg
@@ -98,4 +98,13 @@ Description: The /dev/kmsg character device node provides userspace access
logic is used internally when messages are printed to the
console, /proc/kmsg or the syslog() syscall.
+ By default, kernel tries to avoid fragments by concatenating
+ when it can and fragments are rare; however, when extended
+ console support is enabled, the in-kernel concatenation is
+ disabled and /dev/kmsg output will contain more fragments. If
+ the log consumer performs concatenation, the end result
+ should be the same. In the future, the in-kernel concatenation
+ may be removed entirely and /dev/kmsg users are recommended to
+ implement fragment handling.
+
Users: dmesg(1), userspace kernel log consumers
diff --git a/kernel/Documentation/ABI/testing/sysfs-ata b/kernel/Documentation/ABI/testing/sysfs-ata
index 9231daef3..aa4296498 100644
--- a/kernel/Documentation/ABI/testing/sysfs-ata
+++ b/kernel/Documentation/ABI/testing/sysfs-ata
@@ -97,7 +97,7 @@ trim
unsupported: Drive does not support DSM TRIM
unqueued: Drive supports unqueued DSM TRIM only
queued: Drive supports queued DSM TRIM
- forced_unqueued: Drive's unqueued DSM support is known to be
+ forced_unqueued: Drive's queued DSM support is known to be
buggy and only unqueued TRIM commands
are sent
diff --git a/kernel/Documentation/ABI/testing/sysfs-block b/kernel/Documentation/ABI/testing/sysfs-block
index 8df003963..71d184dbb 100644
--- a/kernel/Documentation/ABI/testing/sysfs-block
+++ b/kernel/Documentation/ABI/testing/sysfs-block
@@ -60,6 +60,13 @@ Description:
Indicates whether a storage device is capable of storing
integrity metadata. Set if the device is T10 PI-capable.
+What: /sys/block/<disk>/integrity/protection_interval_bytes
+Date: July 2015
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Describes the number of data bytes which are protected
+ by one integrity tuple. Typically the device's logical
+ block size.
What: /sys/block/<disk>/integrity/write_generate
Date: June 2008
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index b4d0b99af..924265a12 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -8,13 +8,6 @@ Description: (RW) Enable/disable tracing on this specific trace entiry.
of coresight components linking the source to the sink is
configured and managed automatically by the coresight framework.
-What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/status
-Date: November 2014
-KernelVersion: 3.19
-Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) List various control and status registers. The specific
- layout and content is driver specific.
-
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_idx
Date: November 2014
KernelVersion: 3.19
@@ -112,7 +105,7 @@ KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Mask to apply to all the context ID comparator.
-What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -251,3 +244,79 @@ Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (RW) Define the event that controls the trigger.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cpu
+Date: October 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Holds the cpu number this tracer is affined to.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Configuration Code register
+ (0x004). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccer
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Configuration Code Extension
+ register (0x1e8). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmscr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM System Configuration
+ register (0x014). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmidr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM ID register (0x1e4). The
+ value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmcr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Main Control register (0x000).
+ The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtraceidr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Trace ID register (0x200).
+ The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmteevr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Trace Enable Event register
+ (0x020). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtsscr
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Trace Start/Stop Conrol
+ register (0x018). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Enable Conrol #1
+ register (0x024). The value is read directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
+Date: September 2015
+KernelVersion: 4.4
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RO) Print the content of the ETM Enable Conrol #2
+ register (0x01c). The value is read directly from the HW.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
new file mode 100644
index 000000000..2355ed8ae
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -0,0 +1,450 @@
+What: /sys/bus/coresight/devices/<memory_map>.etm/enable_source
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Enable/disable tracing on this specific trace entiry.
+ Enabling a source implies the source has been configured
+ properly and a sink has been identidifed for it. The path
+ of coresight components linking the source to the sink is
+ configured and managed automatically by the coresight framework.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cpu
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) The CPU this tracing entity is associated with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_pe_cmp
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of PE comparator inputs that are
+ available for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_addr_cmp
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of address comparator pairs that are
+ available for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_cntr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of counters that are available for
+ tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ext_inp
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates how many external inputs are implemented.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/numcidc
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of Context ID comparators that are
+ available for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/numvmidc
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of VMID comparators that are available
+ for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nrseqstate
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of sequencer states that are
+ implemented.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_resource
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of resource selection pairs that are
+ available for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/nr_ss_cmp
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Indicates the number of single-shot comparator controls that
+ are available for tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/reset
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (W) Cancels all configuration on a trace unit and set it back
+ to its boot configuration.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mode
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls various modes supported by this ETM, for example
+ P0 instruction tracing, branch broadcast, cycle counting and
+ context ID tracing.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/pe
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls which PE to trace.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/event
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls the tracing of arbitrary events from bank 0 to 3.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/event_instren
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls the behavior of the events in bank 0 to 3.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/event_ts
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls the insertion of global timestamps in the trace
+ streams.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/syncfreq
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls how often trace synchronization requests occur.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cyc_threshold
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Sets the threshold value for cycle counting.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/bb_ctrl
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls which regions in the memory map are enabled to
+ use branch broadcasting.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/event_vinst
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls instruction trace filtering.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/s_exlevel_vinst
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) In Secure state, each bit controls whether instruction
+ tracing is enabled for the corresponding exception level.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/ns_exlevel_vinst
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) In non-secure state, each bit controls whether instruction
+ tracing is enabled for the corresponding exception level.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/addr_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which address comparator or pair (of comparators) to
+ work with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/addr_instdatatype
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls what type of comparison the trace unit performs.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/addr_single
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Used to setup single address comparator values.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/addr_range
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Used to setup address range comparator values.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/seq_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which sequensor.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/seq_state
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Use this to set, or read, the sequencer state.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/seq_event
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Moves the sequencer state to a specific state.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Moves the sequencer to state 0 when a programmed event
+ occurs.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which counter unit to work with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cntrldvr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) This sets or returns the reload count value of the
+ specific counter.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_val
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) This sets or returns the current count value of the
+ specific counter.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/cntr_ctrl
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls the operation of the selected counter.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/res_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which resource selection unit to work with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/res_ctrl
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Controls the selection of the resources in the trace unit.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which context ID comparator to work with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Get/Set the context ID comparator value to trigger on.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_masks
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Mask for all 8 context ID comparator value
+ registers (if implemented).
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_idx
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Select which virtual machine ID comparator to work with.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_val
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Get/Set the virtual machine ID comparator value to
+ trigger on.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/vmid_masks
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (RW) Mask for all 8 virtual machine ID comparator value
+ registers (if implemented).
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcoslsr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the OS Lock Status Register (0x304).
+ The value it taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdcr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Power Down Control Register
+ (0x310). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpdsr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Power Down Status Register
+ (0x314). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trclsr
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the SW Lock Status Register
+ (0xFB4). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcauthstatus
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Authentication Status Register
+ (0xFB8). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevid
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Device ID Register
+ (0xFC8). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcdevtype
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Device Type Register
+ (0xFCC). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr0
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Peripheral ID0 Register
+ (0xFE0). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr1
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Peripheral ID1 Register
+ (0xFE4). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr2
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Peripheral ID2 Register
+ (0xFE8). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/mgmt/trcpidr3
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Print the content of the Peripheral ID3 Register
+ (0xFEC). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr0
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the tracing capabilities of the trace unit (0x1E0).
+ The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr1
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the tracing capabilities of the trace unit (0x1E4).
+ The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr2
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the maximum size of the data value, data address,
+ VMID, context ID and instuction address in the trace unit
+ (0x1E8). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr3
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the value associated with various resources
+ available to the trace unit. See the Trace Macrocell
+ architecture specification for more details (0x1E8).
+ The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr4
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns how many resources the trace unit supports (0x1F0).
+ The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr5
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns how many resources the trace unit supports (0x1F4).
+ The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr8
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the maximum speculation depth of the instruction
+ trace stream. (0x180). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr9
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the number of P0 right-hand keys that the trace unit
+ can use (0x184). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr10
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the number of P1 right-hand keys that the trace unit
+ can use (0x188). The value is taken directly from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr11
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the number of special P1 right-hand keys that the
+ trace unit can use (0x18C). The value is taken directly from
+ the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr12
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the number of conditional P1 right-hand keys that
+ the trace unit can use (0x190). The value is taken directly
+ from the HW.
+
+What: /sys/bus/coresight/devices/<memory_map>.etm/trcidr/trcidr13
+Date: April 2015
+KernelVersion: 4.01
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: (R) Returns the number of special conditional P1 right-hand keys
+ that the trace unit can use (0x194). The value is taken
+ directly from the HW.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-fcoe b/kernel/Documentation/ABI/testing/sysfs-bus-fcoe
index 21640eaad..657df13b1 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-fcoe
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -32,7 +32,7 @@ Description: 'FCoE Controller' instances on the fcoe bus.
Attributes:
- fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
+ fcf_dev_loss_tmo: Device loss timeout period (see below). Changing
this value will change the dev_loss_tmo for all
FCFs discovered by this controller.
@@ -61,7 +61,7 @@ Attributes:
lesb/err_block: Link Error Status Block (LESB) block error count.
lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel
- Serivces error count.
+ Services error count.
Notes: ctlr_X (global increment starting at 0)
@@ -85,7 +85,7 @@ Attributes:
fabric.
selected: 1 indicates that the switch has been selected for use;
- 0 indicates that the swich will not be used.
+ 0 indicates that the switch will not be used.
fc_map: The Fibre Channel MAP
@@ -93,7 +93,7 @@ Attributes:
mac: The FCF's MAC address
- fka_peroid: The FIP Keep-Alive peroid
+ fka_period: The FIP Keep-Alive period
fabric_state: The internal kernel state
"Unknown" - Initialization value
@@ -101,9 +101,9 @@ Attributes:
"Connected" - Host is connected to the FCF
"Deleted" - FCF is being removed from the system
- dev_loss_tmo: The device loss timeout peroid for this FCF.
+ dev_loss_tmo: The device loss timeout period for this FCF.
-Notes: A device loss infrastructre similar to the FC Transport's
+Notes: A device loss infrastructure similar to the FC Transport's
is present in fcoe_sysfs. It is nice to have so that a
link flapping adapter doesn't continually advance the count
used to identify the discovered FCF. FCFs will exist in a
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio b/kernel/Documentation/ABI/testing/sysfs-bus-iio
index 1fbdd79d1..0439c2aaf 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-iio
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio
@@ -71,6 +71,8 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -81,6 +83,11 @@ Description:
unique to allow association with event codes. Units after
application of scale and offset are millivolts.
+ Channels with 'i' and 'q' modifiers always exist in pairs and both
+ channels refer to the same signal. The 'i' channel contains the in-phase
+ component of the signal while the 'q' channel contains the quadrature
+ component.
+
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
@@ -246,8 +253,16 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_current_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset
+What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset
What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
@@ -273,14 +288,22 @@ Description:
to the _raw output.
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_current_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -328,6 +351,10 @@ Description:
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -386,6 +413,11 @@ Description:
to compute the calories burnt by the user.
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What: /sys/.../iio:deviceX/in_anglvel_scale_available
+What: /sys/.../iio:deviceX/in_magn_scale_available
+What: /sys/.../iio:deviceX/in_illuminance_scale_available
+What: /sys/.../iio:deviceX/in_intensity_scale_available
+What: /sys/.../iio:deviceX/in_proximity_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
@@ -420,6 +452,16 @@ Description:
to the underlying data channel, then this parameter
gives the 3dB frequency of the filter in Hz.
+What: /sys/.../in_accel_filter_high_pass_3db_frequency
+What: /sys/.../in_anglvel_filter_high_pass_3db_frequency
+What: /sys/.../in_magn_filter_high_pass_3db_frequency
+KernelVersion: 4.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ If a known or controllable high pass filter is applied
+ to the underlying data channel, then this parameter
+ gives the 3dB frequency of the filter in Hz.
+
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
@@ -451,7 +493,7 @@ Contact: linux-iio@vger.kernel.org
Description:
Specifies the output powerdown mode.
DAC output stage is disconnected from the amplifier and
- 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+ 1kohm_to_gnd: connected to ground via an 1kOhm resistor,
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
@@ -461,9 +503,9 @@ Description:
outX_powerdown_mode_available. If Y is not present the
mode is shared across all outputs.
-What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
@@ -539,6 +581,7 @@ What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
+What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en
What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
KernelVersion: 2.6.37
@@ -880,6 +923,26 @@ Description:
met before an event is generated. If direction is not
specified then this period applies to both directions.
+What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db
+What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db
+What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db
+KernelVersion: 4.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ If a low pass filter can be applied to the event generation
+ this property gives its 3db frequency in Hz.
+ A value of zero disables the filter.
+
+What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db
+What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db
+What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db
+KernelVersion: 4.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ If a high pass filter can be applied to the event generation
+ this property gives its 3db frequency in Hz.
+ A value of zero disables the filter.
+
What: /sys/.../events/in_activity_still_thresh_rising_en
What: /sys/.../events/in_activity_still_thresh_falling_en
What: /sys/.../events/in_activity_walking_thresh_rising_en
@@ -978,13 +1041,6 @@ Contact: linux-iio@vger.kernel.org
Description:
Number of scans contained by the buffer.
-What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Bytes per scan. Due to alignment fun, the scan may be larger
- than implied directly by the scan_element parameters.
-
What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
@@ -1016,6 +1072,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en
What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en
What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en
What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en
What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en
@@ -1034,6 +1094,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_incli_type
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type
What: /sys/.../iio:deviceX/scan_elements/in_voltage_type
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type
What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type
What: /sys/.../iio:deviceX/scan_elements/in_pressure_type
@@ -1071,6 +1135,10 @@ Description:
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
+What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index
+What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index
What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index
What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index
What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index
@@ -1228,6 +1296,8 @@ Description:
or without compensation from tilt sensors.
What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw
KernelVersion: 3.18
Contact: linux-iio@vger.kernel.org
Description:
@@ -1236,6 +1306,11 @@ Description:
present, output should be considered as processed with the
unit in milliamps.
+ Channels with 'i' and 'q' modifiers always exist in pairs and both
+ channels refer to the same signal. The 'i' channel contains the in-phase
+ component of the signal while the 'q' channel contains the quadrature
+ component.
+
What: /sys/.../iio:deviceX/in_energy_en
What: /sys/.../iio:deviceX/in_distance_en
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en
@@ -1362,3 +1437,57 @@ Description:
hwfifo_watermak_min but not equal to any of the values in this
list, the driver will chose an appropriate value for the
hardware fifo watermark level.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity
+What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity
+What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity
+What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity
+KernelVersion: 4.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ The emissivity ratio of the surface in the field of view of the
+ contactless temperature sensor. Emissivity varies from 0 to 1,
+ with 1 being the emissivity of a black body.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio
+KernelVersion: 4.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Hardware applied number of measurements for acquiring one
+ data point. The HW will do <type>[_name]_oversampling_ratio
+ measurements and return the average value as output data. Each
+ value resulted from <type>[_name]_oversampling_ratio measurements
+ is considered as one sample for <type>[_name]_sampling_frequency.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
+KernelVersion: 4.3
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no offset etc.) percentage reading of a substance.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
+KernelVersion: 4.3
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no offset etc.) resistance reading that can be processed
+ into an ohm value.
+
+What: /sys/bus/iio/devices/iio:deviceX/heater_enable
+KernelVersion: 4.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ '1' (enable) or '0' (disable) specifying the enable
+ of heater function. Same reading values apply
+ This ABI is especially applicable for humidity sensors
+ to heatup the device and get rid of any condensation
+ in some humidity environment
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/kernel/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
new file mode 100644
index 000000000..f30b4c424
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435
@@ -0,0 +1,43 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_sensing_mode
+Date: August 2015
+KernelVersion: 4.2.0
+Contact: source@cogentembedded.com
+Description:
+ Program sensor type for threshold detector inputs.
+ Could be either "GND-Open" or "Supply-Open" mode. Y is a
+ threshold detector input channel. Channels 0..7, 8..15, 16..23
+ and 24..31 has common sensor types.
+
+What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_falling_value
+Date: August 2015
+KernelVersion: 4.2.0
+Contact: source@cogentembedded.com
+Description:
+ Channel Y low voltage threshold. If sensor input voltage goes lower then
+ this value then the threshold falling event is pushed.
+ Depending on in_voltageY_sensing_mode the low voltage threshold
+ is separately set for "GND-Open" and "Supply-Open" modes.
+ Channels 0..31 have common low threshold values, but could have different
+ sensing_modes.
+ The low voltage threshold range is between 2..21V.
+ Hysteresis between low and high thresholds can not be lower then 2 and
+ can not be odd.
+ If falling threshold results hysteresis to odd value then rising
+ threshold is automatically subtracted by one.
+
+What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_rising_value
+Date: August 2015
+KernelVersion: 4.2.0
+Contact: source@cogentembedded.com
+Description:
+ Channel Y high voltage threshold. If sensor input voltage goes higher then
+ this value then the threshold rising event is pushed.
+ Depending on in_voltageY_sensing_mode the high voltage threshold
+ is separately set for "GND-Open" and "Supply-Open" modes.
+ Channels 0..31 have common high threshold values, but could have different
+ sensing_modes.
+ The high voltage threshold range is between 3..22V.
+ Hysteresis between low and high thresholds can not be lower then 2 and
+ can not be odd.
+ If rising threshold results hysteresis to odd value then falling
+ threshold is automatically appended by one.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/kernel/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
new file mode 100644
index 000000000..c0c1ea924
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x
@@ -0,0 +1,7 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw
+Date: September 2015
+KernelVersion: 4.3
+Contact: Matt Ranostay <mranostay@gmail.com>
+Description:
+ Get the raw calibration VOC value from the sensor.
+ This value has little application outside of calibration.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x b/kernel/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
new file mode 100644
index 000000000..b72bb6255
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
@@ -0,0 +1,9 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion: 4.3
+Contact: linux-iio@vger.kernel.org
+Description:
+ Controls the heater device within the humidity sensor to get
+ rid of excess condensation.
+
+ Valid control values are 0 = OFF, and 1 = ON.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/kernel/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
new file mode 100644
index 000000000..1a6265e92
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-meas-spec
@@ -0,0 +1,8 @@
+What: /sys/bus/iio/devices/iio:deviceX/battery_low
+KernelVersion: 4.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reading returns either '1' or '0'. '1' means that the
+ battery level supplied to sensor is below 2.25V.
+ This ABI is available for tsys02d, htu21, ms8607
+ This ABI is available for htu21, ms8607
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/kernel/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
index 5235e6c74..04ac62305 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
@@ -9,3 +9,34 @@ Description:
automated testing or in situations, where other trigger methods
are not applicable. For example no RTC or spare GPIOs.
X is the IIO index of the trigger.
+
+What: /sys/bus/iio/devices/triggerX/name
+KernelVersion: 2.6.39
+Contact: linux-iio@vger.kernel.org
+Description:
+ The name attribute holds a description string for the current
+ trigger. In order to associate the trigger with an IIO device
+ one should write this name string to
+ /sys/bus/iio/devices/iio:deviceY/trigger/current_trigger.
+
+What: /sys/bus/iio/devices/iio_sysfs_trigger/add_trigger
+KernelVersion: 2.6.39
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is provided by the iio-trig-sysfs stand-alone
+ driver and it is used to activate the creation of a new trigger.
+ In order to achieve this, one should write a positive integer
+ into the associated file, which will serve as the id of the
+ trigger. If the trigger with the specified id is already present
+ in the system, an invalid argument message will be returned.
+
+What: /sys/bus/iio/devices/iio_sysfs_trigger/remove_trigger
+KernelVersion: 2.6.39
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to unregister and delete a previously
+ created trigger from the list of available triggers. In order to
+ achieve this, one should write a positive integer into the
+ associated file, representing the id of the trigger that needs
+ to be removed. If the trigger can't be found, an invalid
+ argument message will be returned to the user.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/kernel/Documentation/ABI/testing/sysfs-bus-iio-vf610
new file mode 100644
index 000000000..ecbc1f4af
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -0,0 +1,7 @@
+What: /sys/bus/iio/devices/iio:deviceX/conversion_mode
+KernelVersion: 4.2
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the hardware conversion mode used. The three
+ available modes are "normal", "high-speed" and "low-power",
+ where the last is the default mode.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
new file mode 100644
index 000000000..22d084384
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth
@@ -0,0 +1,49 @@
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/masters/*
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure output ports for STP masters. Writing -1
+ disables a master; any
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_port
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RO) Output port type:
+ 0: not present,
+ 1: MSU (Memory Storage Unit)
+ 2: CTP (Common Trace Port)
+ 4: PTI (MIPI PTI).
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Data retention policy setting: keep (0) or drop (1)
+ incoming data while output port is in reset.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_null
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) STP NULL packet generation: enabled (1) or disabled (0).
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_flush
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Force flush data from byte packing buffer for the output
+ port.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_reset
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RO) Output port is in reset (1).
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_smcfreq
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) STP sync packet frequency for the port. Specifies the
+ number of clocks between mainenance packets.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
new file mode 100644
index 000000000..b940c5d91
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
@@ -0,0 +1,33 @@
+What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/wrap
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure MSC buffer wrapping. 1 == wrapping enabled.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/mode
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure MSC operating mode:
+ - "single", for contiguous buffer mode (high-order alloc);
+ - "multi", for multiblock mode;
+ - "ExI", for DCI handler mode;
+ - "debug", for debug mode.
+ If operating mode changes, existing buffer is deallocated,
+ provided there are no active users and tracing is not enabled,
+ otherwise the write will fail.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/nr_pages
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure MSC buffer size for "single" or "multi" modes.
+ In single mode, this is a single number of pages, has to be
+ power of 2. In multiblock mode, this is a comma-separated list
+ of numbers of pages for each window to be allocated. Number of
+ windows is not limited.
+ Writing to this file deallocates existing buffer (provided
+ there are no active users and tracing is not enabled) and then
+ allocates a new one.
+
+
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
new file mode 100644
index 000000000..df0b24fd0
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti
@@ -0,0 +1,24 @@
+What: /sys/bus/intel_th/devices/<intel_th_id>-pti/mode
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure PTI output width. Currently supported values
+ are 4, 8, 12, 16.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) 0: PTI trace clock acts as a strobe which only toggles
+ when there is trace data to send. 1: PTI trace clock is a
+ free-running clock.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Configure PTI port clock divider:
+ - 0: Intel TH clock rate,
+ - 1: 1/2 Intel TH clock rate,
+ - 2: 1/4 Intel TH clock rate,
+ - 3: 1/8 Intel TH clock rate.
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
new file mode 100644
index 000000000..4d48a9451
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
@@ -0,0 +1,13 @@
+What: /sys/bus/intel_th/devices/<intel_th_id>-<device><id>/active
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RW) Writes of 1 or 0 enable or disable trace output to this
+ output device. Reads return current status.
+
+What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description: (RO) Port number, corresponding to this output device on the
+ switch (GTH).
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-mei b/kernel/Documentation/ABI/testing/sysfs-bus-mei
index 2066f0bbd..6bd45346a 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-mei
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-mei
@@ -4,4 +4,25 @@ KernelVersion: 3.10
Contact: Samuel Ortiz <sameo@linux.intel.com>
linux-mei@linux.intel.com
Description: Stores the same MODALIAS value emitted by uevent
- Format: mei:<mei device name>
+ Format: mei:<mei device name>:<device uuid>:
+
+What: /sys/bus/mei/devices/.../name
+Date: May 2015
+KernelVersion: 4.2
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Stores mei client device name
+ Format: string
+
+What: /sys/bus/mei/devices/.../uuid
+Date: May 2015
+KernelVersion: 4.2
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Stores mei client device uuid
+ Format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
+
+What: /sys/bus/mei/devices/.../version
+Date: Aug 2015
+KernelVersion: 4.3
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Stores mei client protocol version
+ Format: %d
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio b/kernel/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
new file mode 100644
index 000000000..4d08f28dc
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/janz-cmodio/.../modulbus_number
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+ Value representing the HEX switch S2 of the janz carrier board CMOD-IO or CAN-PCI2
+
+ Read-only: value of the configuration switch (0..15)
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-usb b/kernel/Documentation/ABI/testing/sysfs-bus-usb
index e5cc7633d..136ba17d2 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-usb
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-usb
@@ -1,3 +1,23 @@
+What: /sys/bus/usb/devices/INTERFACE/authorized
+Date: August 2015
+Description:
+ This allows to authorize (1) or deauthorize (0)
+ individual interfaces instead a whole device
+ in contrast to the device authorization.
+ If a deauthorized interface will be authorized
+ so the driver probing must be triggered manually
+ by writing INTERFACE to /sys/bus/usb/drivers_probe
+ This allows to avoid side-effects with drivers
+ that need multiple interfaces.
+ A deauthorized interface cannot be probed or claimed.
+
+What: /sys/bus/usb/devices/usbX/interface_authorized_default
+Date: August 2015
+Description:
+ This is used as value that determines if interfaces
+ would be authorized by default.
+ The value can be 1 or 0. It's by default 1.
+
What: /sys/bus/usb/device/.../authorized
Date: July 2008
KernelVersion: 2.6.26
@@ -114,6 +134,22 @@ Description:
enabled for the device. Developer can write y/Y/1 or n/N/0 to
the file to enable/disable the feature.
+What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+ /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date: November 2015
+Contact: Kevin Strasser <kevin.strasser@linux.intel.com>
+ Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+ If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
+ in to a xHCI host which supports link PM, it will check if U1
+ and U2 exit latencies have been set in the BOS descriptor; if
+ the check is passed and the host supports USB3 hardware LPM,
+ USB3 hardware LPM will be enabled for the device and the USB
+ device directory will contain two files named
+ power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+ files hold a string value (enable or disable) indicating whether
+ or not USB3 hardware LPM U1 or U2 is enabled for the device.
+
What: /sys/bus/usb/devices/.../removable
Date: February 2012
Contact: Matthew Garrett <mjg@redhat.com>
diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/kernel/Documentation/ABI/testing/sysfs-bus-usb-lvstest
index aae68fc2d..5151290cf 100644
--- a/kernel/Documentation/ABI/testing/sysfs-bus-usb-lvstest
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-usb-lvstest
@@ -4,14 +4,14 @@ driver is bound with root hub device.
What: /sys/bus/usb/devices/.../get_dev_desc
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Get Device Descriptor"
for Link Layer Validation device. It is needed for TD.7.06.
What: /sys/bus/usb/devices/.../u1_timeout
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U1 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
@@ -19,7 +19,7 @@ Description:
What: /sys/bus/usb/devices/.../u2_timeout
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U2 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
@@ -27,21 +27,21 @@ Description:
What: /sys/bus/usb/devices/.../hot_reset
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Reset" for Link Layer Validation
device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
What: /sys/bus/usb/devices/.../u3_entry
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 entry" for Link Layer
Validation device. It is needed for TD.7.35 and TD.7.36.
What: /sys/bus/usb/devices/.../u3_exit
Date: March 2014
-Contact: Pratyush Anand <pratyush.anand@st.com>
+Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 exit" for Link Layer
Validation device. It is needed for TD.7.36.
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-cxl b/kernel/Documentation/ABI/testing/sysfs-class-cxl
index d46bba801..b07e86d45 100644
--- a/kernel/Documentation/ABI/testing/sysfs-class-cxl
+++ b/kernel/Documentation/ABI/testing/sysfs-class-cxl
@@ -6,6 +6,17 @@ Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is
Slave contexts (eg. /sys/class/cxl/afu0.0s):
+What: /sys/class/cxl/<afu>/afu_err_buf
+Date: September 2014
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ AFU Error Buffer contents. The contents of this file are
+ application specific and depends on the AFU being used.
+ Applications interacting with the AFU can use this attribute
+ to know about the current error condition and take appropriate
+ action like logging the event etc.
+
+
What: /sys/class/cxl/<afu>/irqs_max
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
@@ -15,6 +26,7 @@ Description: read/write
that hardware can support (eg. 2037). Write values will limit
userspace applications to that many userspace interrupts. Must
be >= irqs_min.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/irqs_min
Date: September 2014
@@ -24,6 +36,7 @@ Description: read only
userspace must request on a CXL_START_WORK ioctl. Userspace may
omit the num_interrupts field in the START_WORK IOCTL to get
this minimum automatically.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/mmio_size
Date: September 2014
@@ -31,6 +44,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the size of the MMIO space that may be mmaped
by userspace.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/modes_supported
Date: September 2014
@@ -38,6 +52,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
List of the modes this AFU supports. One per line.
Valid entries are: "dedicated_process" and "afu_directed"
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/mode
Date: September 2014
@@ -46,6 +61,7 @@ Description: read/write
The current mode the AFU is using. Will be one of the modes
given in modes_supported. Writing will change the mode
provided that no user contexts are attached.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/prefault_mode
@@ -59,6 +75,7 @@ Description: read/write
descriptor as an effective address and
prefault what it points to.
all: all segments process calling START_WORK maps.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/reset
Date: September 2014
@@ -66,12 +83,14 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: write only
Writing 1 here will reset the AFU provided there are not
contexts active on the AFU.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/api_version
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the current version of the kernel/user API.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014
@@ -79,6 +98,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the the lowest version of the userspace API
this this kernel supports.
+Users: https://github.com/ibm-capi/libcxl
AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
@@ -92,6 +112,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Hexadecimal value of the vendor ID found in this AFU
configuration record.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/device
Date: February 2015
@@ -99,6 +120,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Hexadecimal value of the device ID found in this AFU
configuration record.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/class
Date: February 2015
@@ -106,6 +128,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Hexadecimal value of the class code found in this AFU
configuration record.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/config
Date: February 2015
@@ -115,6 +138,7 @@ Description: read only
record. The format is expected to match the either the standard
or extended configuration space defined by the PCIe
specification.
+Users: https://github.com/ibm-capi/libcxl
@@ -126,18 +150,21 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the size of the MMIO space that may be mmaped
by userspace. This includes all slave contexts space also.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>m/pp_mmio_len
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the Per Process MMIO space length.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>m/pp_mmio_off
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Decimal value of the Per Process MMIO space offset.
+Users: https://github.com/ibm-capi/libcxl
Card info (eg. /sys/class/cxl/card0)
@@ -147,12 +174,14 @@ Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Identifies the CAIA Version the card implements.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/psl_revision
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Identifies the revision level of the PSL.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/base_image
Date: September 2014
@@ -162,6 +191,7 @@ Description: read only
that support loadable PSLs. For FPGAs this field identifies
the image contained in the on-adapter flash which is loaded
during the initial program load.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/image_loaded
Date: September 2014
@@ -169,6 +199,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Will return "user" or "factory" depending on the image loaded
onto the card.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/load_image_on_perst
Date: December 2014
@@ -183,6 +214,7 @@ Description: read/write
user or factory image to be loaded.
Default is to reload on PERST whichever image the card has
loaded.
+Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/reset
Date: October 2014
@@ -190,3 +222,14 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: write only
Writing 1 will issue a PERST to card which may cause the card
to reload the FPGA depending on load_image_on_perst.
+Users: https://github.com/ibm-capi/libcxl
+
+What: /sys/class/cxl/<card>/perst_reloads_same_image
+Date: July 2015
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read/write
+ Trust that when an image is reloaded via PERST, it will not
+ have changed.
+ 0 = don't trust, the image may be different (default)
+ 1 = trust that the image will not change.
+Users: https://github.com/ibm-capi/libcxl
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-fpga-manager b/kernel/Documentation/ABI/testing/sysfs-class-fpga-manager
new file mode 100644
index 000000000..23056c532
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-fpga-manager
@@ -0,0 +1,37 @@
+What: /sys/class/fpga_manager/<fpga>/name
+Date: August 2015
+KernelVersion: 4.3
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Name of low level fpga manager driver.
+
+What: /sys/class/fpga_manager/<fpga>/state
+Date: August 2015
+KernelVersion: 4.3
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Read fpga manager state as a string.
+ The intent is to provide enough detail that if something goes
+ wrong during FPGA programming (something that the driver can't
+ fix) then userspace can know, i.e. if the firmware request
+ fails, that could be due to not being able to find the firmware
+ file.
+
+ This is a superset of FPGA states and fpga manager driver
+ states. The fpga manager driver is walking through these steps
+ to get the FPGA into a known operating state. It's a sequence,
+ though some steps may get skipped. Valid FPGA states will vary
+ by manufacturer; this is a superset.
+
+ * unknown = can't determine state
+ * power off = FPGA power is off
+ * power up = FPGA reports power is up
+ * reset = FPGA held in reset state
+ * firmware request = firmware class request in progress
+ * firmware request error = firmware request failed
+ * write init = preparing FPGA for programming
+ * write init error = Error while preparing FPGA for
+ programming
+ * write = FPGA ready to receive image data
+ * write error = Error while programming
+ * write complete = Doing post programming steps
+ * write complete error = Error while doing post programming
+ * operating = FPGA is programmed and operating
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-mic.txt b/kernel/Documentation/ABI/testing/sysfs-class-mic.txt
index 13f48afc5..d45eed2bf 100644
--- a/kernel/Documentation/ABI/testing/sysfs-class-mic.txt
+++ b/kernel/Documentation/ABI/testing/sysfs-class-mic.txt
@@ -41,18 +41,15 @@ Description:
When read, this entry provides the current state of an Intel
MIC device in the context of the card OS. Possible values that
will be read are:
- "offline" - The MIC device is ready to boot the card OS. On
+ "ready" - The MIC device is ready to boot the card OS. On
reading this entry after an OSPM resume, a "boot" has to be
written to this entry if the card was previously shutdown
during OSPM suspend.
- "online" - The MIC device has initiated booting a card OS.
+ "booting" - The MIC device has initiated booting a card OS.
+ "online" - The MIC device has completed boot and is online
"shutting_down" - The card OS is shutting down.
+ "resetting" - A reset has been initiated for the MIC device
"reset_failed" - The MIC device has failed to reset.
- "suspending" - The MIC device is currently being prepared for
- suspend. On reading this entry, a "suspend" has to be written
- to the state sysfs entry to ensure the card is shutdown during
- OSPM suspend.
- "suspended" - The MIC device has been suspended.
When written, this sysfs entry triggers different state change
operations depending upon the current state of the card OS.
@@ -62,8 +59,6 @@ Description:
sysfs entries.
"reset" - Initiates device reset.
"shutdown" - Initiates card OS shutdown.
- "suspend" - Initiates card OS shutdown and also marks the card
- as suspended.
What: /sys/class/mic/mic(x)/shutdown_status
Date: October 2013
@@ -126,7 +121,7 @@ Description:
the card. This sysfs entry can be written with the following
valid strings:
a) linux - Boot a Linux image.
- b) elf - Boot an elf image for flash updates.
+ b) flash - Boot an image for flash updates.
What: /sys/class/mic/mic(x)/log_buf_addr
Date: October 2013
@@ -155,3 +150,17 @@ Description:
daemon to set the log buffer length address. The correct log
buffer length address to be written can be found in the
System.map file of the card OS.
+
+What: /sys/class/mic/mic(x)/heartbeat_enable
+Date: March 2015
+KernelVersion: 3.20
+Contact: Ashutosh Dixit <ashutosh.dixit@intel.com>
+Description:
+ The MIC drivers detect and inform user space about card crashes
+ via a heartbeat mechanism (see the description of
+ shutdown_status above). User space can turn off this
+ notification by setting heartbeat_enable to 0 and enable it by
+ setting this entry to 1. If this notification is disabled it is
+ the responsibility of user space to detect card crashes via
+ alternative means such as a network ping. This setting is
+ enabled by default.
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-net b/kernel/Documentation/ABI/testing/sysfs-class-net
index 5ecfd72ba..668604fc8 100644
--- a/kernel/Documentation/ABI/testing/sysfs-class-net
+++ b/kernel/Documentation/ABI/testing/sysfs-class-net
@@ -39,6 +39,25 @@ Description:
Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC
address.
+What: /sys/class/net/<bridge iface>/bridge/group_fwd_mask
+Date: January 2012
+KernelVersion: 3.2
+Contact: netdev@vger.kernel.org
+Description:
+ Bitmask to allow forwarding of link local frames with address
+ 01-80-C2-00-00-0X on a bridge device. Only values that set bits
+ not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h
+ allowed.
+ Default value 0 does not forward any link local frames.
+
+ Restricted bits:
+ 0: 01-80-C2-00-00-00 Bridge Group Address used for STP
+ 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+ 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+ Any values not setting these bits can be used. Take special
+ care when forwarding control frames e.g. 802.1X-PAE or LLDP.
+
What: /sys/class/net/<iface>/broadcast
Date: April 2005
KernelVersion: 2.6.12
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-net-janz-ican3 b/kernel/Documentation/ABI/testing/sysfs-class-net-janz-ican3
new file mode 100644
index 000000000..fdbc03a2b
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-net-janz-ican3
@@ -0,0 +1,19 @@
+What: /sys/class/net/<iface>/termination
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+ Value representing the can bus termination
+
+ Default: 1 (termination active)
+ Reading: get actual termination state
+ Writing: set actual termination state (0=no termination, 1=termination active)
+
+What: /sys/class/net/<iface>/fwinfo
+Date: May 2015
+KernelVersion: 3.19
+Contact: Andreas Gröger <andreas24groeger@gmail.com>
+Description:
+ Firmware stamp of ican3 module
+ Read-only: 32 byte string identification of the ICAN3 module
+ (known values: "JANZ-ICAN3 ICANOS 1.xx", "JANZ-ICAN3 CAL/CANopen 1.xx")
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-power b/kernel/Documentation/ABI/testing/sysfs-class-power
index 369d2a2d7..fa05719f9 100644
--- a/kernel/Documentation/ABI/testing/sysfs-class-power
+++ b/kernel/Documentation/ABI/testing/sysfs-class-power
@@ -74,3 +74,61 @@ Description:
Valid values:
- 0 - 70 (minutes), step by 10 (rounded down)
+
+What: /sys/class/power_supply/bq24257-charger/ovp_voltage
+Date: October 2015
+KernelVersion: 4.4.0
+Contact: Andreas Dannenberg <dannenberg@ti.com>
+Description:
+ This entry configures the overvoltage protection feature of bq24257-
+ type charger devices. This feature protects the device and other
+ components against damage from overvoltage on the input supply. See
+ device datasheet for details.
+
+ Valid values:
+ - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
+ 10500000 (all uV)
+
+What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage
+Date: October 2015
+KernelVersion: 4.4.0
+Contact: Andreas Dannenberg <dannenberg@ti.com>
+Description:
+ This entry configures the input dynamic power path management voltage of
+ bq24257-type charger devices. Once the supply drops to the configured
+ voltage, the input current limit is reduced down to prevent the further
+ drop of the supply. When the IC enters this mode, the charge current is
+ lower than the set value. See device datasheet for details.
+
+ Valid values:
+ - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+ 4760000 (all uV)
+
+What: /sys/class/power_supply/bq24257-charger/high_impedance_enable
+Date: October 2015
+KernelVersion: 4.4.0
+Contact: Andreas Dannenberg <dannenberg@ti.com>
+Description:
+ This entry allows enabling the high-impedance mode of bq24257-type
+ charger devices. If enabled, it places the charger IC into low power
+ standby mode with the switch mode controller disabled. When disabled,
+ the charger operates normally. See device datasheet for details.
+
+ Valid values:
+ - 1: enabled
+ - 0: disabled
+
+What: /sys/class/power_supply/bq24257-charger/sysoff_enable
+Date: October 2015
+KernelVersion: 4.4.0
+Contact: Andreas Dannenberg <dannenberg@ti.com>
+Description:
+ This entry allows enabling the sysoff mode of bq24257-type charger
+ devices. If enabled and the input is removed, the internal battery FET
+ is turned off in order to reduce the leakage from the BAT pin to less
+ than 1uA. Note that on some devices/systems this disconnects the battery
+ from the system. See device datasheet for details.
+
+ Valid values:
+ - 1: enabled
+ - 0: disabled
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-power-twl4030 b/kernel/Documentation/ABI/testing/sysfs-class-power-twl4030
new file mode 100644
index 000000000..be26af0f1
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -0,0 +1,45 @@
+What: /sys/class/power_supply/twl4030_ac/max_current
+ /sys/class/power_supply/twl4030_usb/max_current
+Description:
+ Read/Write limit on current which may
+ be drawn from the ac (Accessory Charger) or
+ USB port.
+
+ Value is in micro-Amps.
+
+ Value is set automatically to an appropriate
+ value when a cable is plugged or unplugged.
+
+ Value can the set by writing to the attribute.
+ The change will only persist until the next
+ plug event. These event are reported via udev.
+
+
+What: /sys/class/power_supply/twl4030_usb/mode
+Description:
+ Changing mode for USB port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
+ "continuous"
+ - activate mode described as "linear" in
+ TWL data sheets. This uses whatever
+ current is available and doesn't switch off
+ when voltage drops.
+
+ This is useful for unstable power sources
+ such as bicycle dynamo, but care should
+ be taken that battery is not over-charged.
+
+What: /sys/class/power_supply/twl4030_ac/mode
+Description:
+ Changing mode for 'ac' port.
+ Writing to this can disable charging.
+
+ Possible values are:
+ "auto" - draw power as appropriate for detected
+ power source and battery status.
+ "off" - do not draw any power.
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-scsi_tape b/kernel/Documentation/ABI/testing/sysfs-class-scsi_tape
new file mode 100644
index 000000000..9be398b87
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-scsi_tape
@@ -0,0 +1,109 @@
+What: /sys/class/scsi_tape/*/stats/in_flight
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Show the number of I/Os currently in-flight between the st
+ module and the SCSI mid-layer.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/io_ns
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total amount of time spent waiting for all I/O
+ to and from the tape drive to complete. This includes all
+ reads, writes, and other SCSI commands issued to the tape
+ drive. An example of other SCSI commands would be tape
+ movement such as a rewind when a rewind tape device is
+ closed. This item is measured in nanoseconds.
+
+ To determine the amount of time spent waiting for other I/O
+ to complete subtract read_ns and write_ns from this value.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/other_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ The number of I/O requests issued to the tape drive other
+ than SCSI read/write requests.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/read_byte_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total number of bytes requested from the tape drive.
+ This value is presented in bytes because tape drives support
+ variable length block sizes.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/read_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total number of read requests issued to the tape
+ drive.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/read_ns
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total amount of time in nanoseconds waiting for
+ read I/O requests to complete.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/write_byte_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total number of bytes written to the tape drive.
+ This value is presented in bytes because tape drives support
+ variable length block sizes.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/write_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total number of write requests issued to the tape
+ drive.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/write_ms
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the total amount of time in nanoseconds waiting for
+ write I/O requests to complete.
+Users:
+
+
+What: /sys/class/scsi_tape/*/stats/resid_cnt
+Date: Apr 2015
+KernelVersion: 4.2
+Contact: Shane Seymour <shane.seymour@hp.com>
+Description:
+ Shows the number of times we found that a residual >0
+ was found when the SCSI midlayer indicated that there was
+ an error. For reads this may be a case of someone issuing
+ reads greater than the block size.
+Users:
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-stm b/kernel/Documentation/ABI/testing/sysfs-class-stm
new file mode 100644
index 000000000..c9aa4f3fc
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-stm
@@ -0,0 +1,14 @@
+What: /sys/class/stm/<stm>/masters
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+ Shows first and last available to software master numbers on
+ this STM device.
+
+What: /sys/class/stm/<stm>/channels
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+ Shows the number of channels per master on this STM device.
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-stm_source b/kernel/Documentation/ABI/testing/sysfs-class-stm_source
new file mode 100644
index 000000000..57b8dd39b
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-stm_source
@@ -0,0 +1,11 @@
+What: /sys/class/stm_source/<stm_source>/stm_source_link
+Date: June 2015
+KernelVersion: 4.3
+Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+ stm_source device linkage to stm device, where its tracing data
+ is directed. Reads return an existing connection or "<none>" if
+ this stm_source is not connected to any stm device yet.
+ Write an existing (registered) stm device's name here to
+ connect that device. If a device is already connected to this
+ stm_source, it will first be disconnected.
diff --git a/kernel/Documentation/ABI/testing/sysfs-class-zram b/kernel/Documentation/ABI/testing/sysfs-class-zram
new file mode 100644
index 000000000..48ddacbe0
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-class-zram
@@ -0,0 +1,24 @@
+What: /sys/class/zram-control/
+Date: August 2015
+KernelVersion: 4.2
+Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+ The zram-control/ class sub-directory belongs to zram
+ device class
+
+What: /sys/class/zram-control/hot_add
+Date: August 2015
+KernelVersion: 4.2
+Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+ RO attribute. Read operation will cause zram to add a new
+ device and return its device id back to user (so one can
+ use /dev/zram<id>), or error code.
+
+What: /sys/class/zram-control/hot_remove
+Date: August 2015
+KernelVersion: 4.2
+Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+ WO attribute. Remove a specific /dev/zramX device, where X
+ is a device_id provided by user.
diff --git a/kernel/Documentation/ABI/testing/sysfs-devices-system-cpu b/kernel/Documentation/ABI/testing/sysfs-devices-system-cpu
index da9551357..b683e8ee6 100644
--- a/kernel/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/kernel/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -243,7 +243,7 @@ Description: Parameters for the CPU cache attributes
coherency_line_size: the minimum amount of data in bytes that gets
transferred from memory to cache
- level: the cache hierarcy in the multi-level cache configuration
+ level: the cache hierarchy in the multi-level cache configuration
number_of_sets: total number of sets in the cache, a set is a
collection of cache lines with the same cache index
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-corsair b/kernel/Documentation/ABI/testing/sysfs-driver-hid-corsair
new file mode 100644
index 000000000..b8827f0f1
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-hid-corsair
@@ -0,0 +1,15 @@
+What: /sys/bus/drivers/corsair/<dev>/macro_mode
+Date: August 2015
+KernelVersion: 4.2
+Contact: Clement Vuchener <clement.vuchener@gmail.com>
+Description: Get/set the current playback mode. "SW" for software mode
+ where G-keys triggers their regular key codes. "HW" for
+ hardware playback mode where the G-keys play their macro
+ from the on-board memory.
+
+
+What: /sys/bus/drivers/corsair/<dev>/current_profile
+Date: August 2015
+KernelVersion: 4.2
+Contact: Clement Vuchener <clement.vuchener@gmail.com>
+Description: Get/set the current selected profile. Values are from 1 to 3.
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff b/kernel/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
index b3f6a2ac5..db197a879 100644
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-hid-logitech-lg4ff
@@ -1,7 +1,7 @@
-What: /sys/module/hid_logitech/drivers/hid:logitech/<dev>/range.
+What: /sys/bus/hid/drivers/logitech/<dev>/range
Date: July 2011
KernelVersion: 3.2
-Contact: Michal Malý <madcatxster@gmail.com>
+Contact: Michal Malý <madcatxster@devoid-pointer.net>
Description: Display minimum, maximum and current range of the steering
wheel. Writing a value within min and max boundaries sets the
range of the wheel.
@@ -9,7 +9,7 @@ Description: Display minimum, maximum and current range of the steering
What: /sys/bus/hid/drivers/logitech/<dev>/alternate_modes
Date: Feb 2015
KernelVersion: 4.1
-Contact: Michal Malý <madcatxster@gmail.com>
+Contact: Michal Malý <madcatxster@devoid-pointer.net>
Description: Displays a set of alternate modes supported by a wheel. Each
mode is listed as follows:
Tag: Mode Name
@@ -45,7 +45,7 @@ Description: Displays a set of alternate modes supported by a wheel. Each
What: /sys/bus/hid/drivers/logitech/<dev>/real_id
Date: Feb 2015
KernelVersion: 4.1
-Contact: Michal Malý <madcatxster@gmail.com>
+Contact: Michal Malý <madcatxster@devoid-pointer.net>
Description: Displays the real model of the wheel regardless of any
alternate mode the wheel might be switched to.
It is a read-only value.
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
deleted file mode 100644
index 55e281b00..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
+++ /dev/null
@@ -1,53 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/actual_profile
-Date: Januar 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 1-5.
- When read, this attribute returns the number of the actual
- profile which is also the profile that's active on device startup.
- When written this attribute activates the selected profile
- immediately.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button
-Date: Januar 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The keyboard can store short macros with consist of 1 button with
- several modifier keys internally.
- When written, this file lets one set the sequence for a specific
- button for a specific profile. Button and profile numbers are
- included in written data. The data has to be 24 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info
-Date: Januar 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns some info about the device like the
- installed firmware version.
- The size of the data is 8 bytes in size.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask
-Date: Januar 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The keyboard lets the user deactivate 5 certain keys like the
- windows and application keys, to protect the user from the outcome
- of accidentally pressing them.
- The integer value of this attribute has bits 0-4 set depending
- on the state of the corresponding key.
- When read, this file returns the current state of the buttons.
- When written, the given buttons are activated/deactivated
- immediately.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key
-Date: Januar 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The keyboard has a condensed layout without num-lock key.
- Instead it uses a mode-key which activates a gaming mode where
- the assignment of the number block changes.
- The integer value of this attribute ranges from 0 (OFF) to 1 (ON).
- When read, this file returns the actual state of the key.
- When written, the key is activated/deactivated immediately.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
deleted file mode 100644
index c601d0f2a..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
+++ /dev/null
@@ -1,153 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 0-4.
- When read, this attribute returns the number of the actual
- profile. This value is persistent, so its equivalent to the
- profile that's active when the device is powered on next time.
- When written, this file sets the number of the startup profile
- and the device activates this profile immediately.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- The data is 6 bytes long.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one deactivate certain keys like
- windows and application keys, to prevent accidental presses.
- Profile number for which this settings occur is included in
- written data. The data has to be 6 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- capslock key for a specific profile. Profile number is included
- in written data. The data has to be 6 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- easyzone keys for a specific profile. Profile number is included
- in written data. The data has to be 65 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- function keys for a specific profile. Profile number is included
- in written data. The data has to be 41 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the macro
- keys for a specific profile. Profile number is included in
- written data. The data has to be 35 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the media
- keys for a specific profile. Profile number is included in
- written data. The data has to be 29 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- thumbster keys for a specific profile. Profile number is included
- in written data. The data has to be 23 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the time in secs since
- epoch in which the last configuration took place.
- The data has to be 20 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the backlight intensity for
- a specific profile. Profile number is included in written data.
- The data has to be 10 bytes long for Isku, IskuFX needs 16 bytes
- of data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one store macros with max 500
- keystrokes for a specific button for a specific profile.
- Button and profile numbers are included in written data.
- The data has to be 2083 bytes long.
- Before reading this file, control has to be written to select
- which profile and key to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
-Date: November 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one reset the device.
- The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one select which data from which
- profile will be read next. The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
-Date: June 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one trigger easyshift functionality
- from the host.
- The data has to be 16 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
-Date: February 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one trigger temporary color schemes
- from the host.
- The data has to be 16 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
deleted file mode 100644
index 7bd776f9c..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ /dev/null
@@ -1,96 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 0-4.
- When read, this attribute returns the number of the actual
- profile. This value is persistent, so its equivalent to the
- profile that's active when the mouse is powered on next time.
- When written, this file sets the number of the startup profile
- and the mouse activates this profile immediately.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
-Date: November 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- When written, the device can be reset.
- The data is 8 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store a macro with max 500 key/button strokes
- internally.
- When written, this file lets one set the sequence for a specific
- button for a specific profile. Button and profile numbers are
- included in written data. The data has to be 2082 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When written, this file lets one write the respective profile
- buttons back to the mouse. The data has to be 77 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When written, this file lets one write the respective profile
- settings back to the mouse. The data has to be 43 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse has a tracking- and a distance-control-unit. These
- can be activated/deactivated and the lift-off distance can be
- set. The data has to be 6 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
-Date: May 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: Used to active some easy* functions of the mouse from outside.
- The data has to be 16 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written a calibration process for the tracking control unit
- can be initiated/cancelled. Also lets one read/write sensor
- registers.
- The data has to be 4 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
-Date: October 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read the mouse returns a 30x30 pixel image of the
- sampled underground. This works only in the course of a
- calibration process initiated with tcu.
- The returned data is 1028 bytes in size.
- This file is readonly.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
deleted file mode 100644
index 41a9b7fbf..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
+++ /dev/null
@@ -1,105 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. actual_profile holds number of actual profile.
- This value is persistent, so its value determines the profile
- that's active when the mouse is powered on next time.
- When written, the mouse activates the set profile immediately.
- The data has to be 3 bytes long.
- The mouse will reject invalid data.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one select which data from which
- profile will be read next. The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- When written, the device can be reset.
- The data is 6 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store a macro with max 500 key/button strokes
- internally.
- When written, this file lets one set the sequence for a specific
- button for a specific profile. Button and profile numbers are
- included in written data. The data has to be 2082 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When written, this file lets one write the respective profile
- buttons back to the mouse. The data has to be 59 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When written, this file lets one write the respective profile
- settings back to the mouse. The data has to be 31 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse has a tracking- and a distance-control-unit. These
- can be activated/deactivated and the lift-off distance can be
- set. The data has to be 6 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: Used to active some easy* functions of the mouse from outside.
- The data has to be 16 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written a calibration process for the tracking control unit
- can be initiated/cancelled. Also lets one read/write sensor
- registers.
- The data has to be 4 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
-Date: December 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read the mouse returns a 30x30 pixel image of the
- sampled underground. This works only in the course of a
- calibration process initiated with tcu.
- The returned data is 1028 bytes in size.
- This file is readonly.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
deleted file mode 100644
index a10404f15..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ /dev/null
@@ -1,49 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The integer value of this attribute ranges from 0-4.
- When read, this attribute returns the number of the active
- profile.
- When written, the mouse activates this profile immediately.
- The profile that's active when powered down is the same that's
- active when the mouse is powered on.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
-Date: November 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- When written, the device can be reset.
- The data is 6 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When written, this file lets one write the respective profile
- buttons back to the mouse. The data has to be 23 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
-Date: January 2011
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When written, this file lets one write the respective profile
- settings back to the mouse. The data has to be 16 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
deleted file mode 100644
index 31c6c4c8b..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-lua
+++ /dev/null
@@ -1,7 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
-Date: October 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, cpi, button and light settings can be configured.
- When read, actual cpi setting and sensor data are returned.
- The data has to be 8 bytes long.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
deleted file mode 100644
index 9fa9de30d..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ /dev/null
@@ -1,49 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
-Date: November 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- When written, the device can be reset.
- The data is 6 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_settings holds information like resolution, sensitivity
- and light effects.
- When written, this file lets one write the respective profile
- settings back to the mouse. The data has to be 13 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split in settings and buttons.
- profile_buttons holds information about button layout.
- When written, this file lets one write the respective profile
- buttons back to the mouse. The data has to be 19 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
-Date: August 2010
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns the settings stored in the mouse.
- The size of the data is 3 bytes and holds information on the
- startup_profile.
- When written, this file lets write settings back to the mouse.
- The data has to be 3 bytes long. The mouse will reject invalid
- data.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos
deleted file mode 100644
index 1d6a8cf9d..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos
+++ /dev/null
@@ -1,178 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one select which data from which
- profile will be read next. The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. profile holds index of actual profile.
- This value is persistent, so its value determines the profile
- that's active when the device is powered on next time.
- When written, the device activates the set profile immediately.
- The data has to be 3 bytes long.
- The device will reject invalid data.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the default of all keys for
- a specific profile. Profile index is included in written data.
- The data has to be 125 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- function keys for a specific profile. Profile index is included
- in written data. The data has to be 95 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the macro
- keys for a specific profile. Profile index is included in
- written data. The data has to be 35 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- thumbster keys for a specific profile. Profile index is included
- in written data. The data has to be 23 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- capslock and function keys for a specific profile. Profile index
- is included in written data. The data has to be 8 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the function of the
- easyzone keys for a specific profile. Profile index is included
- in written data. The data has to be 294 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one deactivate certain keys like
- windows and application keys, to prevent accidental presses.
- Profile index for which this settings occur is included in
- written data. The data has to be 6 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the backlight intensity for
- a specific profile. Profile index is included in written data.
- This attribute is only valid for the glow and pro variant.
- The data has to be 16 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one store macros with max 480
- keystrokes for a specific button for a specific profile.
- Button and profile indexes are included in written data.
- The data has to be 2002 bytes long.
- Before reading this file, control has to be written to select
- which profile and key to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- The data is 8 bytes long.
- This file is readonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one reset the device.
- The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one trigger easyshift functionality
- from the host.
- The data has to be 16 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one switch between stored and custom
- light settings.
- This attribute is only valid for the pro variant.
- The data has to be 8 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set per-key lighting for different
- layers.
- This attribute is only valid for the pro variant.
- The data has to be 1382 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set the actual per-key lighting.
- This attribute is only valid for the pro variant.
- The data has to be 20 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro
-Date: October 2013
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one set a light macro that is looped
- whenever the device gets in dimness mode.
- This attribute is only valid for the pro variant.
- The data has to be 2002 bytes long.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
deleted file mode 100644
index f1e02a98b..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu
+++ /dev/null
@@ -1,76 +0,0 @@
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split into general settings and
- button settings. buttons holds informations about button layout.
- When written, this file lets one write the respective profile
- buttons to the mouse. The data has to be 47 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- Before reading this file, control has to be written to select
- which profile to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one select which data from which
- profile will be read next. The data has to be 3 bytes long.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. A profile is split into general settings and
- button settings. profile holds informations like resolution, sensitivity
- and light effects.
- When written, this file lets one write the respective profile
- settings back to the mouse. The data has to be 43 bytes long.
- The mouse will reject invalid data.
- Which profile to write is determined by the profile number
- contained in the data.
- This file is writeonly.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When read, this file returns general data like firmware version.
- When written, the device can be reset.
- The data is 8 bytes long.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: When written, this file lets one store macros with max 500
- keystrokes for a specific button for a specific profile.
- Button and profile numbers are included in written data.
- The data has to be 2083 bytes long.
- Before reading this file, control has to be written to select
- which profile and key to read.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile
-Date: Mai 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse can store 5 profiles which can be switched by the
- press of a button. profile holds number of actual profile.
- This value is persistent, so its value determines the profile
- that's active when the mouse is powered on next time.
- When written, the mouse activates the set profile immediately.
- The data has to be 3 bytes long.
- The mouse will reject invalid data.
-Users: http://roccat.sourceforge.net
-
-What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor
-Date: July 2012
-Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
-Description: The mouse has a Avago ADNS-3090 sensor.
- This file allows reading and writing of the mouse sensors registers.
- The data has to be 4 bytes long.
-Users: http://roccat.sourceforge.net
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-ppi b/kernel/Documentation/ABI/testing/sysfs-driver-ppi
index 7d1435bc9..9921ef285 100644
--- a/kernel/Documentation/ABI/testing/sysfs-driver-ppi
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-ppi
@@ -1,4 +1,4 @@
-What: /sys/devices/pnp0/<bus-num>/ppi/
+What: /sys/class/tpm/tpmX/ppi/
Date: August 2012
Kernel Version: 3.6
Contact: xiaoyan.zhang@intel.com
@@ -8,9 +8,14 @@ Description:
folder makes sense. The folder path can be got by command
'find /sys/ -name 'pcrs''. For the detail information of PPI,
please refer to the PPI specification from
+
http://www.trustedcomputinggroup.org/
-What: /sys/devices/pnp0/<bus-num>/ppi/version
+ In Linux 4.2 ppi was moved to the character device directory.
+ A symlink from tpmX/device/ppi to tpmX/ppi to provide backwards
+ compatibility.
+
+What: /sys/class/tpm/tpmX/ppi/version
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
@@ -18,7 +23,7 @@ Description:
platform.
This file is readonly.
-What: /sys/devices/pnp0/<bus-num>/ppi/request
+What: /sys/class/tpm/tpmX/ppi/request
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
@@ -28,7 +33,7 @@ Description:
integer value range from 1 to 160, and 0 means no request.
This file can be read and written.
-What: /sys/devices/pnp0/00:<bus-num>/ppi/response
+What: /sys/class/tpm/tpmX/ppi/response
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
@@ -37,7 +42,7 @@ Description:
: <response description>".
This file is readonly.
-What: /sys/devices/pnp0/<bus-num>/ppi/transition_action
+What: /sys/class/tpm/tpmX/ppi/transition_action
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
@@ -47,7 +52,7 @@ Description:
description>".
This file is readonly.
-What: /sys/devices/pnp0/<bus-num>/ppi/tcg_operations
+What: /sys/class/tpm/tpmX/ppi/tcg_operations
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
@@ -58,7 +63,7 @@ Description:
This attribute is only supported by PPI version 1.2+.
This file is readonly.
-What: /sys/devices/pnp0/<bus-num>/ppi/vs_operations
+What: /sys/class/tpm/tpmX/ppi/vs_operations
Date: August 2012
Contact: xiaoyan.zhang@intel.com
Description:
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-st b/kernel/Documentation/ABI/testing/sysfs-driver-st
new file mode 100644
index 000000000..ba5d77008
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-st
@@ -0,0 +1,12 @@
+What: /sys/bus/scsi/drivers/st/debug_flag
+Date: October 2015
+Kernel Version: ?.?
+Contact: shane.seymour@hpe.com
+Description:
+ This file allows you to turn debug output from the st driver
+ off if you write a '0' to the file or on if you write a '1'.
+ Note that debug output requires that the module be compiled
+ with the #define DEBUG set to a non-zero value (this is the
+ default). If DEBUG is set to 0 then this file will not
+ appear in sysfs as its presence is conditional upon debug
+ output support being compiled into the module.
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/kernel/Documentation/ABI/testing/sysfs-driver-sunxi-sid
deleted file mode 100644
index ffb9536f6..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-sunxi-sid
+++ /dev/null
@@ -1,22 +0,0 @@
-What: /sys/devices/*/<our-device>/eeprom
-Date: August 2013
-Contact: Oliver Schinagl <oliver@schinagl.nl>
-Description: read-only access to the SID (Security-ID) on current
- A-series SoC's from Allwinner. Currently supports A10, A10s, A13
- and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
- whereas the newer A20 SoC exposes 512 bytes split into sections.
- Besides the 16 bytes of SID, there's also an SJTAG area,
- HDMI-HDCP key and some custom keys. Below a quick overview, for
- details see the user manual:
- 0x000 128 bit root-key (sun[457]i)
- 0x010 128 bit boot-key (sun7i)
- 0x020 64 bit security-jtag-key (sun7i)
- 0x028 16 bit key configuration (sun7i)
- 0x02b 16 bit custom-vendor-key (sun7i)
- 0x02c 320 bit low general key (sun7i)
- 0x040 32 bit read-control access (sun7i)
- 0x064 224 bit low general key (sun7i)
- 0x080 2304 bit HDCP-key (sun7i)
- 0x1a0 768 bit high general key (sun7i)
-Users: any user space application which wants to read the SID on
- Allwinner's A-series of CPU's.
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_haps b/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_haps
new file mode 100644
index 000000000..a662370b4
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-toshiba_haps
@@ -0,0 +1,20 @@
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/protection_level
+Date: August 16, 2014
+KernelVersion: 3.17
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the built-in accelerometer protection level,
+ valid values are:
+ * 0 -> Disabled
+ * 1 -> Low
+ * 2 -> Medium
+ * 3 -> High
+ The default potection value is set to 2 (Medium).
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/reset_protection
+Date: August 16, 2014
+KernelVersion: 3.17
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file turns off the built-in accelerometer for a few
+ seconds and then restore normal operation. Accepting 1 as the
+ only parameter.
diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-wacom b/kernel/Documentation/ABI/testing/sysfs-driver-wacom
index c4f0fed64..dca429340 100644
--- a/kernel/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/kernel/Documentation/ABI/testing/sysfs-driver-wacom
@@ -77,3 +77,22 @@ Description:
The format is also scrambled, like in the USB mode, and it can
be summarized by converting 76543210 into GECA6420.
HGFEDCBA HFDB7531
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing the character sequence '*' followed by a newline to
+ this file will delete all of the current pairings on the
+ device. Other character sequences are reserved. This file is
+ write only.
+
+What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date: July 2015
+Contact: linux-input@vger.kernel.org
+Description:
+ Reading from this file reports the mode status of the
+ remote as indicated by the LED lights on the device. If no
+ reports have been received from the paired device, reading
+ from this file will report '-1'. The mode is read-only
+ and cannot be set through the driver.
diff --git a/kernel/Documentation/ABI/testing/sysfs-firmware-dmi b/kernel/Documentation/ABI/testing/sysfs-firmware-dmi-entries
index c78f9ab01..210ad44b9 100644
--- a/kernel/Documentation/ABI/testing/sysfs-firmware-dmi
+++ b/kernel/Documentation/ABI/testing/sysfs-firmware-dmi-entries
@@ -1,4 +1,4 @@
-What: /sys/firmware/dmi/
+What: /sys/firmware/dmi/entries/
Date: February 2011
Contact: Mike Waychison <mikew@google.com>
Description:
diff --git a/kernel/Documentation/ABI/testing/sysfs-firmware-dmi-tables b/kernel/Documentation/ABI/testing/sysfs-firmware-dmi-tables
new file mode 100644
index 000000000..ff3cac8ed
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-firmware-dmi-tables
@@ -0,0 +1,22 @@
+What: /sys/firmware/dmi/tables/
+Date: April 2015
+Contact: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
+Description:
+ The firmware provides DMI structures as a packed list of
+ data referenced by a SMBIOS table entry point. The SMBIOS
+ entry point contains general information, like SMBIOS
+ version, DMI table size, etc. The structure, content and
+ size of SMBIOS entry point is dependent on SMBIOS version.
+ The format of SMBIOS entry point and DMI structures
+ can be read in SMBIOS specification.
+
+ The dmi/tables provides raw SMBIOS entry point and DMI tables
+ through sysfs as an alternative to utilities reading them
+ from /dev/mem. The raw SMBIOS entry point and DMI table are
+ presented as binary attributes and are accessible via:
+
+ /sys/firmware/dmi/tables/smbios_entry_point
+ /sys/firmware/dmi/tables/DMI
+
+ The complete DMI information can be obtained using these two
+ tables.
diff --git a/kernel/Documentation/ABI/testing/sysfs-firmware-efi b/kernel/Documentation/ABI/testing/sysfs-firmware-efi
index 05874da7c..e794eac32 100644
--- a/kernel/Documentation/ABI/testing/sysfs-firmware-efi
+++ b/kernel/Documentation/ABI/testing/sysfs-firmware-efi
@@ -18,3 +18,13 @@ Contact: Dave Young <dyoung@redhat.com>
Description: It shows the physical address of config table entry in the EFI
system table.
Users: Kexec
+
+What: /sys/firmware/efi/systab
+Date: April 2005
+Contact: linux-efi@vger.kernel.org
+Description: Displays the physical addresses of all EFI Configuration
+ Tables found via the EFI System Table. The order in
+ which the tables are printed forms an ABI and newer
+ versions are always printed first, i.e. ACPI20 comes
+ before ACPI.
+Users: dmidecode
diff --git a/kernel/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/kernel/Documentation/ABI/testing/sysfs-firmware-efi-esrt
new file mode 100644
index 000000000..6e431d1a4
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-firmware-efi-esrt
@@ -0,0 +1,81 @@
+What: /sys/firmware/efi/esrt/
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: Provides userland access to read the EFI System Resource Table
+ (ESRT), a catalog of firmware for which can be updated with
+ the UEFI UpdateCapsule mechanism described in section 7.5 of
+ the UEFI Standard.
+Users: fwupdate - https://github.com/rhinstaller/fwupdate
+
+What: /sys/firmware/efi/esrt/fw_resource_count
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The number of entries in the ESRT
+
+What: /sys/firmware/efi/esrt/fw_resource_count_max
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The maximum number of entries that /could/ be registered
+ in the allocation the table is currently in. This is
+ really only useful to the system firmware itself.
+
+What: /sys/firmware/efi/esrt/fw_resource_version
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The version of the ESRT structure provided by the firmware.
+
+What: /sys/firmware/efi/esrt/entries/entry$N/
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: Each ESRT entry is identified by a GUID, and each gets a
+ subdirectory under entries/ .
+ example: /sys/firmware/efi/esrt/entries/entry0/
+
+What: /sys/firmware/efi/esrt/entries/entry$N/fw_type
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: What kind of firmware entry this is:
+ 0 - Unknown
+ 1 - System Firmware
+ 2 - Device Firmware
+ 3 - UEFI Driver
+
+What: /sys/firmware/efi/esrt/entries/entry$N/fw_class
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: This is the entry's guid, and will match the directory name.
+
+What: /sys/firmware/efi/esrt/entries/entry$N/fw_version
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The version of the firmware currently installed. This is a
+ 32-bit unsigned integer.
+
+What: /sys/firmware/efi/esrt/entries/entry$N/lowest_supported_fw_version
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The lowest version of the firmware that can be installed.
+
+What: /sys/firmware/efi/esrt/entries/entry$N/capsule_flags
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: Flags that must be passed to UpdateCapsule()
+
+What: /sys/firmware/efi/esrt/entries/entry$N/last_attempt_version
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The last firmware version for which an update was attempted.
+
+What: /sys/firmware/efi/esrt/entries/entry$N/last_attempt_status
+Date: February 2015
+Contact: Peter Jones <pjones@redhat.com>
+Description: The result of the last firmware update attempt for the
+ firmware resource entry.
+ 0 - Success
+ 1 - Insufficient resources
+ 2 - Incorrect version
+ 3 - Invalid format
+ 4 - Authentication error
+ 5 - AC power event
+ 6 - Battery power event
+
diff --git a/kernel/Documentation/ABI/testing/sysfs-fs-f2fs b/kernel/Documentation/ABI/testing/sysfs-fs-f2fs
index 2c4cc4200..0345f2d1c 100644
--- a/kernel/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/kernel/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -80,3 +80,15 @@ Date: February 2015
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Controls the trimming rate in batch mode.
+
+What: /sys/fs/f2fs/<disk>/cp_interval
+Date: October 2015
+Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+ Controls the checkpoint timing.
+
+What: /sys/fs/f2fs/<disk>/ra_nid_pages
+Date: October 2015
+Contact: "Chao Yu" <chao2.yu@samsung.com>
+Description:
+ Controls the count of nid pages to be readaheaded.
diff --git a/kernel/Documentation/ABI/testing/sysfs-gpio b/kernel/Documentation/ABI/testing/sysfs-gpio
index 80f4c94c7..55ffa2df1 100644
--- a/kernel/Documentation/ABI/testing/sysfs-gpio
+++ b/kernel/Documentation/ABI/testing/sysfs-gpio
@@ -16,7 +16,8 @@ Description:
/sys/class/gpio
/export ... asks the kernel to export a GPIO to userspace
/unexport ... to return a GPIO to the kernel
- /gpioN ... for each exported GPIO #N
+ /gpioN ... for each exported GPIO #N OR
+ /<LINE-NAME> ... for a properly named GPIO line
/value ... always readable, writes fail for input GPIOs
/direction ... r/w as: in, out (default low); write: high, low
/edge ... r/w as: none, falling, rising, both
diff --git a/kernel/Documentation/ABI/testing/sysfs-hypervisor-pmu b/kernel/Documentation/ABI/testing/sysfs-hypervisor-pmu
new file mode 100644
index 000000000..224faa105
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-hypervisor-pmu
@@ -0,0 +1,23 @@
+What: /sys/hypervisor/pmu/pmu_mode
+Date: August 2015
+KernelVersion: 4.3
+Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:
+ Describes mode that Xen's performance-monitoring unit (PMU)
+ uses. Accepted values are
+ "off" -- PMU is disabled
+ "self" -- The guest can profile itself
+ "hv" -- The guest can profile itself and, if it is
+ privileged (e.g. dom0), the hypervisor
+ "all" -- The guest can profile itself, the hypervisor
+ and all other guests. Only available to
+ privileged guests.
+
+What: /sys/hypervisor/pmu/pmu_features
+Date: August 2015
+KernelVersion: 4.3
+Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:
+ Describes Xen PMU features (as an integer). A set bit indicates
+ that the corresponding feature is enabled. See
+ include/xen/interface/xenpmu.h for available features
diff --git a/kernel/Documentation/ABI/testing/sysfs-platform-twl4030-usb b/kernel/Documentation/ABI/testing/sysfs-platform-twl4030-usb
new file mode 100644
index 000000000..512c51be6
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-platform-twl4030-usb
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/*twl4030-usb/vbus
+Description:
+ Read-only status reporting if VBUS (approx 5V)
+ is being supplied by the USB bus.
+
+ Possible values: "on", "off".
+
+ Changes are notified via select/poll.
diff --git a/kernel/Documentation/ABI/testing/sysfs-power b/kernel/Documentation/ABI/testing/sysfs-power
index f45518163..50b368d49 100644
--- a/kernel/Documentation/ABI/testing/sysfs-power
+++ b/kernel/Documentation/ABI/testing/sysfs-power
@@ -256,3 +256,15 @@ Description:
Writing a "1" enables this printing while writing a "0"
disables it. The default value is "0". Reading from this file
will display the current value.
+
+What: /sys/power/pm_wakeup_irq
+Date: April 2015
+Contact: Alexandra Yates <alexandra.yates@linux.intel.org>
+Description:
+ The /sys/power/pm_wakeup_irq file reports to user space the IRQ
+ number of the first wakeup interrupt (that is, the first
+ interrupt from an IRQ line armed for system wakeup) seen by the
+ kernel during the most recent system suspend/resume cycle.
+
+ This output is useful for system wakeup diagnostics of spurious
+ wakeup interrupts.