summaryrefslogtreecommitdiffstats
path: root/docs/userguide/packet_forwarding.userguide.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/userguide/packet_forwarding.userguide.rst')
-rw-r--r--docs/userguide/packet_forwarding.userguide.rst555
1 files changed, 555 insertions, 0 deletions
diff --git a/docs/userguide/packet_forwarding.userguide.rst b/docs/userguide/packet_forwarding.userguide.rst
new file mode 100644
index 000000000..ba117508c
--- /dev/null
+++ b/docs/userguide/packet_forwarding.userguide.rst
@@ -0,0 +1,555 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+
+.. http://creativecommons.org/licenses/by/4.0
+
+=================
+PACKET FORWARDING
+=================
+=======================
+About Packet Forwarding
+=======================
+
+Packet Forwarding is a test suite of KVMFORNFV which is used to measure the total time taken by a
+**Packet** generated by the traffic generator to return from Guest/Host as per the implemented
+scenario. Packet Forwarding is implemented using VSWITCHPERF/``VSPERF software of OPNFV`` and an
+``IXIA Traffic Generator``.
+
+Version Features
+----------------
+
++-----------------------------+---------------------------------------------------+
+| | |
+| **Release** | **Features** |
+| | |
++=============================+===================================================+
+| | - Packet Forwarding is not part of Colorado |
+| Colorado | release of KVMFORNFV |
+| | |
++-----------------------------+---------------------------------------------------+
+| | - Packet Forwarding is a testcase in KVMFORNFV |
+| | - Implements three scenarios (Host/Guest/SRIOV) |
+| | as part of testing in KVMFORNFV |
+| Danube | - Uses available testcases of OPNFV's VSWTICHPERF |
+| | software (PVP/PVVP) |
+| | - Works with IXIA Traffic Generator |
++-----------------------------+---------------------------------------------------+
+
+======
+VSPERF
+======
+
+VSPerf is an OPNFV testing project.
+VSPerf will develop a generic and architecture agnostic vSwitch testing framework and associated
+tests, that will serve as a basis for validating the suitability of different vSwitch
+implementations in a Telco NFV deployment environment. The output of this project will be utilized
+by the OPNFV Performance and Test group and its associated projects, as part of OPNFV Platform and
+VNF level testing and validation.
+
+For complete VSPERF documentation go to `link.`_
+
+.. _link.: <http://artifacts.opnfv.org/vswitchperf/colorado/index.html>
+
+
+Installation
+------------
+Guidelines of installating `VSPERF`_.
+
+.. _VSPERF: <http://artifacts.opnfv.org/vswitchperf/colorado/configguide/index.html>
+
+Supported Operating Systems
+---------------------------
+
+* CentOS 7
+* Fedora 20
+* Fedora 21
+* Fedora 22
+* RedHat 7.2
+* Ubuntu 14.04
+
+Supported vSwitches
+-------------------
+The vSwitch must support Open Flow 1.3 or greater.
+
+* OVS (built from source).
+* OVS with DPDK (built from source).
+
+Supported Hypervisors
+---------------------
+
+* Qemu version 2.3.
+
+Other Requirements
+------------------
+The test suite requires Python 3.3 and relies on a number of other
+packages. These need to be installed for the test suite to function.
+
+Installation of required packages, preparation of Python 3 virtual
+environment and compilation of OVS, DPDK and QEMU is performed by
+script **systems/build_base_machine.sh**. It should be executed under
+user account, which will be used for vsperf execution.
+
+ **Please Note:** Password-less sudo access must be configured for given user
+ before script is executed.
+
+Execution of installation script:
+
+.. code:: bashFtrace.debugging.tool.userguide.rst
+
+ $ cd Vswitchperf
+ $ cd systems
+ $ ./build_base_machine.sh
+
+Script **build_base_machine.sh** will install all the vsperf dependencies
+in terms of system packages, Python 3.x and required Python modules.
+In case of CentOS 7 it will install Python 3.3 from an additional repository
+provided by Software Collections (`a link`_). In case of RedHat 7 it will
+install Python 3.4 as an alternate installation in /usr/local/bin. Installation
+script will also use `virtualenv`_ to create a vsperf virtual environment,
+which is isolated from the default Python environment. This environment will
+reside in a directory called **vsperfenv** in $HOME.
+
+You will need to activate the virtual environment every time you start a
+new shell session. Its activation is specific to your OS:
+
+For running testcases VSPERF is installed on Intel pod1-node2 in which centos
+operating system is installed. Only VSPERF installion on Centos is discussed here.
+For installation steps on other operating systems please refer to `here`_.
+
+.. _here: <http://artifacts.opnfv.org/vswitchperf/colorado/configguide/index.html>
+
+For CentOS 7
+-----------------
+
+## Python 3 Packages
+
+To avoid file permission errors and Python version issues, use virtualenv to create an isolated environment with Python3.
+The required Python 3 packages can be found in the `requirements.txt` file in the root of the test suite.
+They can be installed in your virtual environment like so:
+
+.. code:: bash
+
+ scl enable python33 bash
+ # Create virtual environment
+ virtualenv vsperfenv
+ cd vsperfenv
+ source bin/activate
+ pip install -r requirements.txt
+
+
+You need to activate the virtual environment every time you start a new shell session.
+To activate, simple run:
+
+.. code:: bash
+
+ scl enable python33 bash
+ cd vsperfenv
+ source bin/activate
+
+
+Working Behind a Proxy
+-----------------------
+
+If you're behind a proxy, you'll likely want to configure this before running any of the above. For example:
+
+.. code:: bash
+
+ export http_proxy=proxy.mycompany.com:123
+ export https_proxy=proxy.mycompany.com:123
+
+
+
+.. _a link: http://www.softwarecollections.org/en/scls/rhscl/python33/
+.. _virtualenv: https://virtualenv.readthedocs.org/en/latest/
+
+For other OS specific activation click `this link`_:
+
+.. _this link: http://artifacts.opnfv.org/vswitchperf/colorado/configguide/installation.html#other-requirements
+
+Traffic-Generators
+-------------------
+VSPERF supports many Traffic-generators. For configuring VSPERF to work with the available traffic-generator go through `this`_.
+
+.. _this: <http://artifacts.opnfv.org/vswitchperf/colorado/configguide/trafficgen.html>
+
+VSPERF supports the following traffic generators:
+
+ * Dummy (DEFAULT): Allows you to use your own external
+ traffic generator.
+ * IXIA (IxNet and IxOS)
+ * Spirent TestCenter
+ * Xena Networks
+ * MoonGen
+
+To see the list of traffic gens from the cli:
+
+.. code-block:: console
+
+ $ ./vsperf --list-trafficgens
+
+This guide provides the details of how to install
+and configure the various traffic generators.
+
+As KVM4NFV uses only IXIA traffic generator, it is discussed here. For complete documentation regarding traffic generators please follow this `link`_.
+
+.. _link: <https://gerrit.opnfv.org/gerrit/gitweb?p=vswitchperf.git;a=blob;f=docs/configguide/trafficgen.rst;h=85fc35b886d30db3b92a6b7dcce7ca742b70cbdc;hb=HEAD>
+
+==========
+IXIA Setup
+==========
+
+=====================
+Hardware Requirements
+=====================
+VSPERF requires the following hardware to run tests: IXIA traffic generator (IxNetwork), a machine that runs the IXIA client software and a CentOS Linux release 7.1.1503 (Core) host.
+
+Installation
+-------------
+
+Follow the [installation instructions] to install.
+
+IXIA Setup
+------------
+On the CentOS 7 system
+----------------------
+You need to install IxNetworkTclClient$(VER_NUM)Linux.bin.tgz.
+
+On the IXIA client software system
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Find the IxNetwork TCL server app (start -> All Programs -> IXIA -> IxNetwork -> IxNetwork_$(VER_NUM) -> IxNetwork TCL Server)
+ - Right click on IxNetwork TCL Server, select properties
+ - Under shortcut tab in the Target dialogue box make sure there is the argument "-tclport xxxx" where xxxx is your port number (take note of this port number you will need it for the 10_custom.conf file).
+
+.. Figure:: ../images/IXIA1.png
+
+- Hit Ok and start the TCL server application
+
+VSPERF configuration
+--------------------
+
+There are several configuration options specific to the IxNetworks traffic generator
+from IXIA. It is essential to set them correctly, before the VSPERF is executed
+for the first time.
+
+Detailed description of options follows:
+
+ * TRAFFICGEN_IXNET_MACHINE - IP address of server, where IxNetwork TCL Server is running
+ * TRAFFICGEN_IXNET_PORT - PORT, where IxNetwork TCL Server is accepting connections from
+ TCL clients
+ * TRAFFICGEN_IXNET_USER - username, which will be used during communication with IxNetwork
+ TCL Server and IXIA chassis
+ * TRAFFICGEN_IXIA_HOST - IP address of IXIA traffic generator chassis
+ * TRAFFICGEN_IXIA_CARD - identification of card with dedicated ports at IXIA chassis
+ * TRAFFICGEN_IXIA_PORT1 - identification of the first dedicated port at TRAFFICGEN_IXIA_CARD
+ at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of
+ unidirectional traffic, it is essential to correctly connect 1st IXIA port to the 1st NIC
+ at DUT, i.e. to the first PCI handle from WHITELIST_NICS list. Otherwise traffic may not
+ be able to pass through the vSwitch.
+ * TRAFFICGEN_IXIA_PORT2 - identification of the second dedicated port at TRAFFICGEN_IXIA_CARD
+ at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of
+ unidirectional traffic, it is essential to correctly connect 2nd IXIA port to the 2nd NIC
+ at DUT, i.e. to the second PCI handle from WHITELIST_NICS list. Otherwise traffic may not
+ be able to pass through the vSwitch.
+ * TRAFFICGEN_IXNET_LIB_PATH - path to the DUT specific installation of IxNetwork TCL API
+ * TRAFFICGEN_IXNET_TCL_SCRIPT - name of the TCL script, which VSPERF will use for
+ communication with IXIA TCL server
+ * TRAFFICGEN_IXNET_TESTER_RESULT_DIR - folder accessible from IxNetwork TCL server,
+ where test results are stored, e.g. ``c:/ixia_results``; see test-results-share_
+ * TRAFFICGEN_IXNET_DUT_RESULT_DIR - directory accessible from the DUT, where test
+ results from IxNetwork TCL server are stored, e.g. ``/mnt/ixia_results``; see
+ test-results-share_
+
+.. _test-results-share:
+
+Test results share
+-------------------
+
+VSPERF is not able to retrieve test results via TCL API directly. Instead, all test
+results are stored at IxNetwork TCL server. Results are stored at folder defined by
+``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` configuration parameter. Content of this
+folder must be shared (e.g. via samba protocol) between TCL Server and DUT, where
+VSPERF is executed. VSPERF expects, that test results will be available at directory
+configured by ``TRAFFICGEN_IXNET_DUT_RESULT_DIR`` configuration parameter.
+
+Example of sharing configuration:
+
+ * Create a new folder at IxNetwork TCL server machine, e.g. ``c:\ixia_results``
+ * Modify sharing options of ``ixia_results`` folder to share it with everybody
+ * Create a new directory at DUT, where shared directory with results
+ will be mounted, e.g. ``/mnt/ixia_results``
+ * Update your custom VSPERF configuration file as follows:
+
+ .. code-block:: python
+
+ TRAFFICGEN_IXNET_TESTER_RESULT_DIR = 'c:/ixia_results'
+ TRAFFICGEN_IXNET_DUT_RESULT_DIR = '/mnt/ixia_results'
+
+ Note: It is essential to use slashes '/' also in path
+ configured by ``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` parameter.
+ * Install cifs-utils package.
+
+ e.g. at rpm based Linux distribution:
+
+ .. code-block:: console
+
+ yum install cifs-utils
+
+ * Mount shared directory, so VSPERF can access test results.
+
+ e.g. by adding new record into ``/etc/fstab``
+
+ .. code-block:: console
+
+ mount -t cifs //_TCL_SERVER_IP_OR_FQDN_/ixia_results /mnt/ixia_results
+ -o file_mode=0777,dir_mode=0777,nounix
+
+It is recommended to verify, that any new file inserted into ``c:/ixia_results`` folder
+is visible at DUT inside ``/mnt/ixia_results`` directory.
+
+
+Cloning and building src dependencies
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+In order to run VSPERF, you will need to download DPDK and OVS. You can do this manually and build
+them in a preferred location, or you could use vswitchperf/src. The vswitchperf/src directory
+contains makefiles that will allow you to clone and build the libraries that VSPERF depends on,
+such as DPDK and OVS. To clone and build simply:
+
+.. code:: bash
+
+ cd src
+ make
+
+To delete a src subdirectory and its contents to allow you to re-clone simply use:
+
+.. code:: bash
+
+ make cleanse
+
+Configure the `./conf/10_custom.conf` file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The supplied `10_custom.conf` file must be modified, as it contains configuration items for which there are no reasonable default values.
+
+The configuration items that can be added is not limited to the initial contents. Any configuration item mentioned in any .conf file in `./conf` directory can be added and that item will be overridden by the custom
+configuration value.
+
+Using a custom settings file
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Alternatively a custom settings file can be passed to `vsperf` via the `--conf-file` argument.
+
+.. code:: bash
+
+ ./vsperf --conf-file <path_to_settings_py> ...
+
+Note that configuration passed in via the environment (`--load-env`) or via another command line
+argument will override both the default and your custom configuration files. This
+"priority hierarchy" can be described like so (1 = max priority):
+
+1. Command line arguments
+2. Environment variables
+3. Configuration file(s)
+
+Executing tests
+~~~~~~~~~~~~~~~~
+Before running any tests make sure you have root permissions by adding the following line to /etc/sudoers:
+.. code:: bash
+
+ username ALL=(ALL) NOPASSWD: ALL
+
+username in the example above should be replaced with a real username.
+
+To list the available tests:
+
+.. code:: bash
+
+ ./vsperf --list-tests
+
+
+To run a group of tests, for example all tests with a name containing
+'RFC2544':
+
+.. code:: bash
+
+ ./vsperf --conf-file=user_settings.py --tests="RFC2544"
+
+To run all tests:
+
+.. code:: bash
+
+ ./vsperf --conf-file=user_settings.py
+
+Some tests allow for configurable parameters, including test duration (in seconds) as well as packet sizes (in bytes).
+
+.. code:: bash
+
+ ./vsperf --conf-file user_settings.py
+ --tests RFC2544Tput
+ --test-param "rfc2544_duration=10;packet_sizes=128"
+
+For all available options, check out the help dialog:
+
+.. code:: bash
+
+ ./vsperf --help
+
+
+Testcases
+----------
+Available Tests in VSPERF are:
+
+ * phy2phy_tput
+ * phy2phy_forwarding
+ * back2back
+ * phy2phy_tput_mod_vlan
+ * phy2phy_cont
+ * pvp_cont
+ * pvvp_cont
+ * pvpv_cont
+ * phy2phy_scalability
+ * pvp_tput
+ * pvp_back2back
+ * pvvp_tput
+ * pvvp_back2back
+ * phy2phy_cpu_load
+ * phy2phy_mem_load
+
+VSPERF modes of operation
+--------------------------
+
+VSPERF can be run in different modes. By default it will configure vSwitch,
+traffic generator and VNF. However it can be used just for configuration
+and execution of traffic generator. Another option is execution of all
+components except traffic generator itself.
+
+Mode of operation is driven by configuration parameter -m or --mode
+
+.. code-block:: console
+
+ -m MODE, --mode MODE vsperf mode of operation;
+ Values:
+ "normal" - execute vSwitch, VNF and traffic generator
+ "trafficgen" - execute only traffic generator
+ "trafficgen-off" - execute vSwitch and VNF
+ "trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission
+
+In case, that VSPERF is executed in "trafficgen" mode, then configuration
+of traffic generator can be modified through ``TRAFFIC`` dictionary passed to the
+``--test-params`` option. It is not needed to specify all values of ``TRAFFIC``
+dictionary. It is sufficient to specify only values, which should be changed.
+Detailed description of ``TRAFFIC`` dictionary can be found at: ref:`configuration-of-traffic-dictionary`.
+
+Example of execution of VSPERF in "trafficgen" mode:
+
+.. code-block:: console
+
+ $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \
+ --test-params "TRAFFIC={'traffic_type':'rfc2544_continuous','bidir':'False','framerate':60}"
+
+
+================================
+Packet Forwarding Test Scenarios
+================================
+KVMFORNFV currently implements three scenarios as part of testing:
+
+ * Host Scenario
+ * Guest Scenario.
+ * SR-IOV Scenario.
+
+
+Packet Forwarding Host Scenario
+-------------------------------
+Here Host is NODE-2. It has VSPERF installed in it and is properly configured to use IXIA Traffic-generator by providing IXIA CARD, PORTS and Lib paths along with IP.
+please refer to figure.2
+
+.. Figure:: ../images/Host_Scenario.png
+
+Packet Forwarding Guest Scenario
+--------------------------------
+Here the guest is a Virtual Machine (VM) launched by using a modified CentOS image(vsperf provided)
+on Node-2 (Host) using Qemu. In this scenario, the packet is initially forwarded to Host which is
+then forwarded to the launched guest. The time taken by the packet to reach the IXIA traffic-generator
+via Host and Guest is calculated and published as a test result of this scenario.
+
+.. Figure:: ../images/Guest_Scenario.png
+
+Packet Forwarding SRIOV Scenario
+--------------------------------
+Unlike the packet forwarding to Guest-via-Host scenario, here the packet generated at the IXIA is
+directly forwarded to the Guest VM launched on Host by implementing SR-IOV interface at NIC level
+of Host .i.e., Node-2. The time taken by the packet to reach the IXIA traffic-generator is calculated
+and published as a test result for this scenario. SRIOV-support_ is given below, it details how to use SR-IOV.
+
+.. Figure:: ../images/SRIOV_Scenario.png
+
+Using vfio_pci with DPDK
+------------------------
+
+To use vfio with DPDK instead of igb_uio add into your custom configuration
+file the following parameter:
+
+.. code-block:: python
+
+ PATHS['dpdk']['src']['modules'] = ['uio', 'vfio-pci']
+
+
+**NOTE:** In case, that DPDK is installed from binary package, then please
+
+ set ``PATHS['dpdk']['bin']['modules']`` instead.
+
+**NOTE:** Please ensure that Intel VT-d is enabled in BIOS.
+
+**NOTE:** Please ensure your boot/grub parameters include
+the following:
+
+.. code-block:: console
+
+ iommu=pt intel_iommu=on
+
+To check that IOMMU is enabled on your platform:
+
+.. code-block:: console
+
+ $ dmesg | grep IOMMU
+ [ 0.000000] Intel-IOMMU: enabled
+ [ 0.139882] dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
+ [ 0.139888] dmar: IOMMU 1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0466 ecap f020de
+ [ 0.139893] IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0
+ [ 0.139894] IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1
+ [ 0.139895] IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1
+ [ 3.335744] IOMMU: dmar0 using Queued invalidation
+ [ 3.335746] IOMMU: dmar1 using Queued invalidation
+ ....
+
+.. _SRIOV-support:
+
+Using SRIOV support
+-------------------
+
+To use virtual functions of NIC with SRIOV support, use extended form
+of NIC PCI slot definition:
+
+.. code-block:: python
+
+ WHITELIST_NICS = ['0000:03:00.0|vf0', '0000:03:00.1|vf3']
+
+Where ``vf`` is an indication of virtual function usage and following
+number defines a VF to be used. In case that VF usage is detected,
+then vswitchperf will enable SRIOV support for given card and it will
+detect PCI slot numbers of selected VFs.
+
+So in example above, one VF will be configured for NIC '0000:05:00.0'
+and four VFs will be configured for NIC '0000:05:00.1'. Vswitchperf
+will detect PCI addresses of selected VFs and it will use them during
+test execution.
+
+At the end of vswitchperf execution, SRIOV support will be disabled.
+
+SRIOV support is generic and it can be used in different testing scenarios.
+For example:
+
+
+* vSwitch tests with DPDK or without DPDK support to verify impact
+ of VF usage on vSwitch performance
+* tests without vSwitch, where traffic is forwared directly
+ between VF interfaces by packet forwarder (e.g. testpmd application)
+* tests without vSwitch, where VM accesses VF interfaces directly
+ by PCI-passthrough to measure raw VM throughput performance.
+