Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 334 deletions

diff --git a/qemu/tests/qemu-iotests/051 b/qemu/tests/qemu-iotests/051
deleted file mode 100755
index 630cb7a11..000000000
--- a/qemu/tests/qemu-iotests/051
+++ /dev/null
@@ -1,334 +0,0 @@
-#!/bin/bash
-#
-# Test command line configuration of block devices and driver-specific options
-#
-# Copyright (C) 2013 Red Hat, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-# creator
-owner=kwolf@redhat.com
-
-seq=`basename $0`
-echo "QA output created by $seq"
-
-here=`pwd`
-status=1	# failure is the default!
-
-_cleanup()
-{
-	_cleanup_test_img
-}
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-# get standard environment, filters and checks
-. ./common.rc
-. ./common.filter
-
-_supported_fmt qcow2
-_supported_proto file
-_supported_os Linux
-# A compat=0.10 image is created in this test which does not support anything
-# other than refcount_bits=16
-_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
-
-function do_run_qemu()
-{
-    echo Testing: "$@"
-    (
-        if ! test -t 0; then
-            while read cmd; do
-                echo $cmd
-            done
-        fi
-        echo quit
-    ) | $QEMU -nographic -monitor stdio -serial none "$@"
-    echo
-}
-
-function run_qemu()
-{
-    do_run_qemu "$@" 2>&1 | _filter_testdir | _filter_qemu | _filter_generated_node_ids
-}
-
-size=128M
-device_id="drive0"
-
-_make_test_img $size
-cp "$TEST_IMG" "$TEST_IMG.orig"
-mv "$TEST_IMG" "$TEST_IMG.base"
-_make_test_img -b "$TEST_IMG.base" $size
-
-echo
-echo === Unknown option ===
-echo
-
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=,if=none,id=$device_id
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=on,if=none,id=$device_id
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=1234,if=none,id=$device_id
-run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=foo,if=none,id=$device_id
-
-echo
-echo === Unknown protocol option ===
-echo
-
-run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=
-run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=on
-run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=1234
-run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=foo
-
-echo
-echo === Invalid format ===
-echo
-
-run_qemu -drive file="$TEST_IMG",format=foo
-run_qemu -drive file="$TEST_IMG",driver=foo
-run_qemu -drive file="$TEST_IMG",driver=raw,format=qcow2
-run_qemu -drive file="$TEST_IMG",driver=qcow2,format=qcow2
-
-echo
-echo === Device without drive ===
-echo
-
-run_qemu -device virtio-scsi-pci -device scsi-hd
-
-echo
-echo === Overriding backing file ===
-echo
-
-echo "info block" | run_qemu -drive file="$TEST_IMG",driver=qcow2,backing.file.filename="$TEST_IMG.orig",if=none,id=$device_id -nodefaults\
-                  | _filter_generated_node_ids
-
-# Drivers that don't support backing files
-run_qemu -drive file="$TEST_IMG",driver=raw,backing.file.filename="$TEST_IMG.orig"
-run_qemu -drive file="$TEST_IMG",file.backing.driver=file,file.backing.filename="$TEST_IMG.orig"
-run_qemu -drive file="$TEST_IMG",file.backing.driver=qcow2,file.backing.file.filename="$TEST_IMG.orig"
-
-echo
-echo === Enable and disable lazy refcounting on the command line, plus some invalid values ===
-echo
-
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=42
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=foo
-
-
-echo
-echo === With version 2 images enabling lazy refcounts must fail ===
-echo
-
-_make_test_img -ocompat=0.10 $size
-
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on
-run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off
-
-echo
-echo === No medium ===
-echo
-
-case "$QEMU_DEFAULT_MACHINE" in
-    pc)
-        run_qemu -drive if=floppy
-        run_qemu -drive if=ide,media=cdrom
-        run_qemu -drive if=scsi,media=cdrom
-        run_qemu -drive if=ide
-        run_qemu -drive if=scsi
-        ;;
-     *)
-        ;;
-esac
-
-run_qemu -drive if=virtio
-
-case "$QEMU_DEFAULT_MACHINE" in
-    pc)
-        run_qemu -drive if=none,id=disk -device ide-cd,drive=disk
-        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-        run_qemu -drive if=none,id=disk -device ide-drive,drive=disk
-        run_qemu -drive if=none,id=disk -device ide-hd,drive=disk
-        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-        run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-        ;;
-     *)
-        ;;
-esac
-
-echo
-echo === Read-only ===
-echo
-
-case "$QEMU_DEFAULT_MACHINE" in
-    pc)
-        run_qemu -drive file="$TEST_IMG",if=floppy,readonly=on
-        run_qemu -drive file="$TEST_IMG",if=ide,media=cdrom,readonly=on
-        run_qemu -drive file="$TEST_IMG",if=scsi,media=cdrom,readonly=on
-        run_qemu -drive file="$TEST_IMG",if=ide,readonly=on
-        run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on
-        ;;
-     *)
-        ;;
-esac
-
-run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on
-
-case "$QEMU_DEFAULT_MACHINE" in
-    pc)
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-cd,drive=disk
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-drive,drive=disk
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-hd,drive=disk
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk
-        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk
-        ;;
-     *)
-        ;;
-esac
-
-echo
-echo === Cache modes ===
-echo
-
-# Cannot use the test image because cache=none might not work on the host FS
-# Use cdrom so that we won't get errors about missing media
-
-run_qemu -drive driver=null-co,cache=none
-run_qemu -drive driver=null-co,cache=directsync
-run_qemu -drive driver=null-co,cache=writeback
-run_qemu -drive driver=null-co,cache=writethrough
-run_qemu -drive driver=null-co,cache=unsafe
-run_qemu -drive driver=null-co,cache=invalid_value
-
-# Can't test direct=on here because O_DIRECT might not be supported on this FS
-# Test 142 checks the direct=on cases
-
-for cache in writeback writethrough unsafe invalid_value; do
-    echo -e "info block\ninfo block file\ninfo block backing\ninfo block backing-file" | \
-    run_qemu -drive file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=$device_id -nodefaults
-done
-
-echo
-echo === Specifying the protocol layer ===
-echo
-
-run_qemu -drive file="$TEST_IMG",file.driver=file
-
-echo
-echo === Leaving out required options ===
-echo
-
-run_qemu -drive driver=file
-run_qemu -drive driver=nbd
-run_qemu -drive driver=raw
-run_qemu -drive file.driver=file
-run_qemu -drive file.driver=nbd
-run_qemu -drive file.driver=raw
-run_qemu -drive foo=bar
-
-echo
-echo === Specifying both an option and its legacy alias ===
-echo
-
-run_qemu -drive file="$TEST_IMG",iops=1234,throttling.iops-total=5678
-run_qemu -drive file="$TEST_IMG",iops_rd=1234,throttling.iops-read=5678
-run_qemu -drive file="$TEST_IMG",iops_wr=1234,throttling.iops-write=5678
-
-run_qemu -drive file="$TEST_IMG",bps=1234,throttling.bps-total=5678
-run_qemu -drive file="$TEST_IMG",bps_rd=1234,throttling.bps-read=5678
-run_qemu -drive file="$TEST_IMG",bps_wr=1234,throttling.bps-write=5678
-
-run_qemu -drive file="$TEST_IMG",iops_max=1234,throttling.iops-total-max=5678
-run_qemu -drive file="$TEST_IMG",iops_rd_max=1234,throttling.iops-read-max=5678
-run_qemu -drive file="$TEST_IMG",iops_wr_max=1234,throttling.iops-write-max=5678
-
-run_qemu -drive file="$TEST_IMG",bps_max=1234,throttling.bps-total-max=5678
-run_qemu -drive file="$TEST_IMG",bps_rd_max=1234,throttling.bps-read-max=5678
-run_qemu -drive file="$TEST_IMG",bps_wr_max=1234,throttling.bps-write-max=5678
-
-run_qemu -drive file="$TEST_IMG",iops_size=1234,throttling.iops-size=5678
-run_qemu -drive file="$TEST_IMG",readonly=on,read-only=off
-
-echo
-echo === Catching negative/large throttling values ===
-echo
-
-run_qemu -drive file="$TEST_IMG",iops=-1
-run_qemu -drive file="$TEST_IMG",bps=-2
-run_qemu -drive file="$TEST_IMG",bps_rd=-3
-run_qemu -drive file="$TEST_IMG",bps_rd_max=-3
-run_qemu -drive file="$TEST_IMG",throttling.iops-total=-4
-run_qemu -drive file="$TEST_IMG",throttling.bps-total=-5
-# These are accepted
-run_qemu -drive file="$TEST_IMG",bps=0
-run_qemu -drive file="$TEST_IMG",bps=1
-run_qemu -drive file="$TEST_IMG",bps=1000000000000000
-# While these are not
-run_qemu -drive file="$TEST_IMG",bps=1000000000000001
-run_qemu -drive file="$TEST_IMG",bps=9999999999999999
-
-echo
-echo === Parsing protocol from file name ===
-echo
-
-# Protocol strings are supposed to be parsed from traditional option strings,
-# but not when using driver-specific options. We can distinguish them by the
-# error message for non-existing files.
-
-run_qemu -hda foo:bar
-run_qemu -drive file=foo:bar
-run_qemu -drive file.filename=foo:bar
-
-run_qemu -hda "file:$TEST_IMG"
-run_qemu -drive file="file:$TEST_IMG"
-run_qemu -drive file.filename="file:$TEST_IMG"
-
-echo
-echo === Snapshot mode ===
-echo
-
-$QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
-
-
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on,if=none,id=$device_id\
-                                                 | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,if=none,id=$device_id -snapshot\
-                                                 | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io
-
-# Opening a read-only file r/w with snapshot=on
-chmod u-w "$TEST_IMG"
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io
-chmod u+w "$TEST_IMG"
-
-$QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
-
-echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=off,if=none,id=$device_id | _filter_qemu_io
-
-$QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io
-
-echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id\
-                                                                       | _filter_qemu_io
-
-$QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io
-
-# success, all done
-echo "*** done"
-rm -f $seq.full
-status=0