Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

17 files changed, 0 insertions, 5819 deletions

diff --git a/qemu/roms/u-boot/lib/zlib/Makefile b/qemu/roms/u-boot/lib/zlib/Makefile
deleted file mode 100644
index 2fba95f43..000000000
--- a/qemu/roms/u-boot/lib/zlib/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += zlib.o
diff --git a/qemu/roms/u-boot/lib/zlib/adler32.c b/qemu/roms/u-boot/lib/zlib/adler32.c
deleted file mode 100644
index b468441d7..000000000
--- a/qemu/roms/u-boot/lib/zlib/adler32.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-#define BASE 65521UL    /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* use NO_DIVIDE if your processor does not do division in hardware */
-#ifdef NO_DIVIDE
-#  define MOD(a) \
-    do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#  define MOD4(a) \
-    do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
-        if (a >= BASE) a -= BASE; \
-    } while (0)
-#else
-#  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
-#endif
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len)
-{
-    unsigned long sum2;
-    unsigned n;
-
-    /* split Adler-32 into component sums */
-    sum2 = (adler >> 16) & 0xffff;
-    adler &= 0xffff;
-
-    /* in case user likes doing a byte at a time, keep it fast */
-    if (len == 1) {
-        adler += buf[0];
-        if (adler >= BASE)
-            adler -= BASE;
-        sum2 += adler;
-        if (sum2 >= BASE)
-            sum2 -= BASE;
-        return adler | (sum2 << 16);
-    }
-
-    /* initial Adler-32 value (deferred check for len == 1 speed) */
-    if (buf == Z_NULL)
-        return 1L;
-
-    /* in case short lengths are provided, keep it somewhat fast */
-    if (len < 16) {
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        if (adler >= BASE)
-            adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
-        return adler | (sum2 << 16);
-    }
-
-    /* do length NMAX blocks -- requires just one modulo operation */
-    while (len >= NMAX) {
-        len -= NMAX;
-        n = NMAX / 16;          /* NMAX is divisible by 16 */
-        do {
-            DO16(buf);          /* 16 sums unrolled */
-            buf += 16;
-        } while (--n);
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* do remaining bytes (less than NMAX, still just one modulo) */
-    if (len) {                  /* avoid modulos if none remaining */
-        while (len >= 16) {
-            len -= 16;
-            DO16(buf);
-            buf += 16;
-        }
-        while (len--) {
-            adler += *buf++;
-            sum2 += adler;
-        }
-        MOD(adler);
-        MOD(sum2);
-    }
-
-    /* return recombined sums */
-    return adler | (sum2 << 16);
-}
diff --git a/qemu/roms/u-boot/lib/zlib/deflate.c b/qemu/roms/u-boot/lib/zlib/deflate.c
deleted file mode 100644
index 9a20b7034..000000000
--- a/qemu/roms/u-boot/lib/zlib/deflate.c
+++ /dev/null
@@ -1,1832 +0,0 @@
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://www.ietf.org/rfc/rfc1951.txt
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* @(#) $Id$ */
-
-#include "deflate.h"
-
-const char deflate_copyright[] =
-   " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-#ifndef FASTEST
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-#endif
-local block_state deflate_rle    OF((deflate_state *s, int flush));
-local block_state deflate_huff   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-#ifdef FASTEST
-local const config configuration_table[2] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
-#else
-local const config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
-#endif
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-                         Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-                  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int wrap = 1;
-    static const char my_version[] = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-        return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-    if (strm->zalloc == (alloc_func)0) {
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-
-    if (windowBits < 0) { /* suppress zlib wrapper */
-        wrap = 0;
-        windowBits = -windowBits;
-    }
-#ifdef GZIP
-    else if (windowBits > 15) {
-        wrap = 2;       /* write gzip wrapper instead */
-        windowBits -= 16;
-    }
-#endif
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->wrap = wrap;
-    s->gzhead = Z_NULL;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->high_water = 0;      /* nothing written to s->window yet */
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        s->status = FINISH_STATE;
-        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt length = dictLength;
-    uInt n;
-    IPos hash_head = 0;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
-        strm->state->wrap == 2 ||
-        (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
-        return Z_STREAM_ERROR;
-
-    s = strm->state;
-    if (s->wrap)
-        strm->adler = adler32(strm->adler, dictionary, dictLength);
-
-    if (length < MIN_MATCH) return Z_OK;
-    if (length > s->w_size) {
-        length = s->w_size;
-        dictionary += dictLength - length; /* use the tail of the dictionary */
-    }
-    zmemcpy(s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
-
-    /* Insert all strings in the hash table (except for the last two bytes).
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
-     * call of fill_window.
-     */
-    s->ins_h = s->window[0];
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
-        INSERT_STRING(s, n, hash_head);
-    }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
-        return Z_STREAM_ERROR;
-    }
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->wrap < 0) {
-        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
-    }
-    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
-    strm->adler =
-#ifdef GZIP
-        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
-#endif
-        adler32(0L, Z_NULL, 0);
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetHeader (strm, head)
-    z_streamp strm;
-    gz_headerp head;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
-    strm->state->gzhead = head;
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflatePrime (strm, bits, value)
-    z_streamp strm;
-    int bits;
-    int value;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    strm->state->bi_valid = bits;
-    strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-
-#ifdef FASTEST
-    if (level != 0) level = 1;
-#else
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#endif
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
-        return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        strm->total_in != 0) {
-        /* Flush the last buffer: */
-        err = deflate(strm, Z_BLOCK);
-    }
-    if (s->level != level) {
-        s->level = level;
-        s->max_lazy_match   = configuration_table[level].max_lazy;
-        s->good_match       = configuration_table[level].good_length;
-        s->nice_match       = configuration_table[level].nice_length;
-        s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
-    z_streamp strm;
-    int good_length;
-    int max_lazy;
-    int nice_length;
-    int max_chain;
-{
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = strm->state;
-    s->good_match = good_length;
-    s->max_lazy_match = max_lazy;
-    s->nice_match = nice_length;
-    s->max_chain_length = max_chain;
-    return Z_OK;
-}
-
-/* =========================================================================
- * For the default windowBits of 15 and memLevel of 8, this function returns
- * a close to exact, as well as small, upper bound on the compressed size.
- * They are coded as constants here for a reason--if the #define's are
- * changed, then this function needs to be changed as well.  The return
- * value for 15 and 8 only works for those exact settings.
- *
- * For any setting other than those defaults for windowBits and memLevel,
- * the value returned is a conservative worst case for the maximum expansion
- * resulting from using fixed blocks instead of stored blocks, which deflate
- * can emit on compressed data for some combinations of the parameters.
- *
- * This function could be more sophisticated to provide closer upper bounds for
- * every combination of windowBits and memLevel.  But even the conservative
- * upper bound of about 14% expansion does not seem onerous for output buffer
- * allocation.
- */
-uLong ZEXPORT deflateBound(strm, sourceLen)
-    z_streamp strm;
-    uLong sourceLen;
-{
-    deflate_state *s;
-    uLong complen, wraplen;
-    Bytef *str;
-
-    /* conservative upper bound for compressed data */
-    complen = sourceLen +
-              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
-
-    /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return complen + 6;
-
-    /* compute wrapper length */
-    s = strm->state;
-    switch (s->wrap) {
-    case 0:                                 /* raw deflate */
-        wraplen = 0;
-        break;
-    case 1:                                 /* zlib wrapper */
-        wraplen = 6 + (s->strstart ? 4 : 0);
-        break;
-    case 2:                                 /* gzip wrapper */
-        wraplen = 18;
-        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
-            if (s->gzhead->extra != Z_NULL)
-                wraplen += 2 + s->gzhead->extra_len;
-            str = s->gzhead->name;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            str = s->gzhead->comment;
-            if (str != Z_NULL)
-                do {
-                    wraplen++;
-                } while (*str++);
-            if (s->gzhead->hcrc)
-                wraplen += 2;
-        }
-        break;
-    default:                                /* for compiler happiness */
-        wraplen = 6;
-    }
-
-    /* if not default parameters, return conservative bound */
-    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
-        return complen + wraplen;
-
-    /* default settings: return tight bound for that case */
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
-           (sourceLen >> 25) + 13 - 6 + wraplen;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    unsigned len = strm->state->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    zmemcpy(strm->next_out, strm->state->pending_out, len);
-    strm->next_out  += len;
-    strm->state->pending_out  += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    strm->state->pending -= len;
-    if (strm->state->pending == 0) {
-        strm->state->pending_out = strm->state->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        flush > Z_BLOCK || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = strm->state;
-
-    if (s->status == FINISH_STATE && flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the header */
-    if (s->status == INIT_STATE) {
-#ifdef GZIP
-        if (s->wrap == 2) {
-            strm->adler = crc32(0L, Z_NULL, 0);
-            put_byte(s, 31);
-            put_byte(s, 139);
-            put_byte(s, 8);
-            if (s->gzhead == Z_NULL) {
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, OS_CODE);
-                s->status = BUSY_STATE;
-            }
-            else {
-                put_byte(s, (s->gzhead->text ? 1 : 0) +
-                            (s->gzhead->hcrc ? 2 : 0) +
-                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                            (s->gzhead->name == Z_NULL ? 0 : 8) +
-                            (s->gzhead->comment == Z_NULL ? 0 : 16)
-                        );
-                put_byte(s, (Byte)(s->gzhead->time & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, s->gzhead->os & 0xff);
-                if (s->gzhead->extra != Z_NULL) {
-                    put_byte(s, s->gzhead->extra_len & 0xff);
-                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-                }
-                if (s->gzhead->hcrc)
-                    strm->adler = crc32(strm->adler, s->pending_buf,
-                                        s->pending);
-                s->gzindex = 0;
-                s->status = EXTRA_STATE;
-            }
-        }
-        else
-#endif
-        {
-            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-            uInt level_flags;
-
-            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-                level_flags = 0;
-            else if (s->level < 6)
-                level_flags = 1;
-            else if (s->level == 6)
-                level_flags = 2;
-            else
-                level_flags = 3;
-            header |= (level_flags << 6);
-            if (s->strstart != 0) header |= PRESET_DICT;
-            header += 31 - (header % 31);
-
-            s->status = BUSY_STATE;
-            putShortMSB(s, header);
-
-            /* Save the adler32 of the preset dictionary: */
-            if (s->strstart != 0) {
-                putShortMSB(s, (uInt)(strm->adler >> 16));
-                putShortMSB(s, (uInt)(strm->adler & 0xffff));
-            }
-            strm->adler = adler32(0L, Z_NULL, 0);
-        }
-    }
-#ifdef GZIP
-    if (s->status == EXTRA_STATE) {
-        if (s->gzhead->extra != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-
-            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size)
-                        break;
-                }
-                put_byte(s, s->gzhead->extra[s->gzindex]);
-                s->gzindex++;
-            }
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (s->gzindex == s->gzhead->extra_len) {
-                s->gzindex = 0;
-                s->status = NAME_STATE;
-            }
-        }
-        else
-            s->status = NAME_STATE;
-    }
-    if (s->status == NAME_STATE) {
-        if (s->gzhead->name != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->name[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0) {
-                s->gzindex = 0;
-                s->status = COMMENT_STATE;
-            }
-        }
-        else
-            s->status = COMMENT_STATE;
-    }
-    if (s->status == COMMENT_STATE) {
-        if (s->gzhead->comment != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-            int val;
-
-            do {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
-                    }
-                }
-                val = s->gzhead->comment[s->gzindex++];
-                put_byte(s, val);
-            } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0)
-                s->status = HCRC_STATE;
-        }
-        else
-            s->status = HCRC_STATE;
-    }
-    if (s->status == HCRC_STATE) {
-        if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size)
-                flush_pending(strm);
-            if (s->pending + 2 <= s->pending_buf_size) {
-                put_byte(s, (Byte)(strm->adler & 0xff));
-                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-                strm->adler = crc32(0L, Z_NULL, 0);
-                s->status = BUSY_STATE;
-            }
-        }
-        else
-            s->status = BUSY_STATE;
-    }
-#endif
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
-            s->last_flush = -1;
-            return Z_OK;
-        }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                        (*(configuration_table[s->level].func))(s, flush));
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-            if (strm->avail_out == 0) {
-                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-            }
-            return Z_OK;
-            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-             * of deflate should use the same flush parameter to make sure
-             * that the flush is complete. So we don't have to output an
-             * empty block here, this will be done at next call. This also
-             * ensures that for a very small output buffer, we emit at most
-             * one empty block.
-             */
-        }
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                    if (s->lookahead == 0) {
-                        s->strstart = 0;
-                        s->block_start = 0L;
-                    }
-                }
-            }
-            flush_pending(strm);
-            if (strm->avail_out == 0) {
-              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-              return Z_OK;
-            }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->wrap <= 0) return Z_STREAM_END;
-
-    /* Write the trailer */
-#ifdef GZIP
-    if (s->wrap == 2) {
-        put_byte(s, (Byte)(strm->adler & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
-        put_byte(s, (Byte)(strm->total_in & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
-        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
-    }
-    else
-#endif
-    {
-        putShortMSB(s, (uInt)(strm->adler >> 16));
-        putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    }
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
-    status = strm->state->status;
-    if (status != INIT_STATE &&
-        status != EXTRA_STATE &&
-        status != NAME_STATE &&
-        status != COMMENT_STATE &&
-        status != HCRC_STATE &&
-        status != BUSY_STATE &&
-        status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, strm->state->pending_buf);
-    TRY_FREE(strm, strm->state->head);
-    TRY_FREE(strm, strm->state->prev);
-    TRY_FREE(strm, strm->state->window);
-
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-#ifdef MAXSEG_64K
-    return Z_STREAM_ERROR;
-#else
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
-        return Z_STREAM_ERROR;
-    }
-
-    ss = source->state;
-
-    zmemcpy(dest, source, sizeof(z_stream));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy(ds, ss, sizeof(deflate_state));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* following zmemcpy do not work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-#endif /* MAXSEG_64K */
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    Bytef *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
-    }
-#ifdef GZIP
-    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, strm->next_in, len);
-    }
-#endif
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifndef FASTEST
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-#endif
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2.  Note that the checks below
-         * for insufficient lookahead only occur occasionally for performance
-         * reasons.  Therefore uninitialized memory will be accessed, and
-         * conditional jumps will be made that depend on those values.
-         * However the length of the match is limited to the lookahead, so
-         * the output of deflate is not affected by the uninitialized values.
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#else /* FASTEST */
-
-/* ---------------------------------------------------------------------------
- * Optimized version for FASTEST only
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    Assert(cur_match < s->strstart, "no future");
-
-    match = s->window + cur_match;
-
-    /* Return failure if the match length is less than 2:
-     */
-    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
-    /* The check at best_len-1 can be removed because it will be made
-     * again later. (This heuristic is not always a win.)
-     * It is not necessary to compare scan[2] and match[2] since they
-     * are always equal when the other bytes match, given that
-     * the hash keys are equal and that HASH_BITS >= 8.
-     */
-    scan += 2, match += 2;
-    Assert(*scan == *match, "match[2]?");
-
-    /* We check for insufficient lookahead only every 8th comparison;
-     * the 256th check will be made at strstart+258.
-     */
-    do {
-    } while (*++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             *++scan == *++match && *++scan == *++match &&
-             scan < strend);
-
-    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-    len = MAX_MATCH - (int)(strend - scan);
-
-    if (len < MIN_MATCH) return MIN_MATCH - 1;
-
-    s->match_start = cur_match;
-    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
-}
-
-#endif /* FASTEST */
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp(s->window + match,
-                s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-                start, match, length);
-        do {
-            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-        } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif /* DEBUG */
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (sizeof(int) <= 2) {
-            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-                more = wsize;
-
-            } else if (more == (unsigned)(-1)) {
-                /* Very unlikely, but possible on 16 bit machine if
-                 * strstart == 0 && lookahead == 1 (input done a byte at time)
-                 */
-                more--;
-            }
-        }
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-#ifndef FASTEST
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-#endif
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-
-    /* If the WIN_INIT bytes after the end of the current data have never been
-     * written, then zero those bytes in order to avoid memory check reports of
-     * the use of uninitialized (or uninitialised as Julian writes) bytes by
-     * the longest match routines.  Update the high water mark for the next
-     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
-     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
-     */
-    if (s->high_water < s->window_size) {
-        ulg curr = s->strstart + (ulg)(s->lookahead);
-        ulg init;
-
-        if (s->high_water < curr) {
-            /* Previous high water mark below current data -- zero WIN_INIT
-             * bytes or up to end of window, whichever is less.
-             */
-            init = s->window_size - curr;
-            if (init > WIN_INIT)
-                init = WIN_INIT;
-            zmemzero(s->window + curr, (unsigned)init);
-            s->high_water = curr + init;
-        }
-        else if (s->high_water < (ulg)curr + WIN_INIT) {
-            /* High water mark at or above current data, but below current data
-             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
-             * to end of window, whichever is less.
-             */
-            init = (ulg)curr + WIN_INIT - s->high_water;
-            if (init > s->window_size - s->high_water)
-                init = s->window_size - s->high_water;
-            zmemzero(s->window + s->high_water, (unsigned)init);
-            s->high_water += init;
-        }
-    }
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, last) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-                (ulg)((long)s->strstart - s->block_start), \
-                (last)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, last) { \
-   FLUSH_BLOCK_ONLY(s, last); \
-   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
-     */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-                   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-        Assert(s->block_start >= 0L, "block gone");
-
-        s->strstart += s->lookahead;
-        s->lookahead = 0;
-
-        /* Emit a stored block if pending_buf will be full: */
-        max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-            /* strstart == 0 is possible when wraparound on 16-bit machine */
-            s->lookahead = (uInt)(s->strstart - max_start);
-            s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
-        }
-        /* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
-         */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-        }
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;       /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            _tr_tally_dist(s, s->strstart - s->match_start,
-                           s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-#ifndef FASTEST
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++;
-            } else
-#endif
-            {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-#ifndef FASTEST
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head;          /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        hash_head = NIL;
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            s->match_length = longest_match (s, hash_head);
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
-#if TOO_FAR <= 32767
-                || (s->match_length == MIN_MATCH &&
-                    s->strstart - s->match_start > TOO_FAR)
-#endif
-                )) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                           s->prev_length - MIN_MATCH, bflush);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-            if (bflush) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-#endif /* FASTEST */
-
-/* ===========================================================================
- * For Z_RLE, simply look for runs of bytes, generate matches only of distance
- * one.  Do not maintain a hash table.  (It will be regenerated if this run of
- * deflate switches away from Z_RLE.)
- */
-local block_state deflate_rle(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-    uInt prev;              /* byte at distance one to match */
-    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the longest encodable run.
-         */
-        if (s->lookahead < MAX_MATCH) {
-            fill_window(s);
-            if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
-                return need_more;
-            }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* See how many times the previous byte repeats */
-        s->match_length = 0;
-        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
-            scan = s->window + s->strstart - 1;
-            prev = *scan;
-            if (prev == *++scan && prev == *++scan && prev == *++scan) {
-                strend = s->window + s->strstart + MAX_MATCH;
-                do {
-                } while (prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         prev == *++scan && prev == *++scan &&
-                         scan < strend);
-                s->match_length = MAX_MATCH - (int)(strend - scan);
-                if (s->match_length > s->lookahead)
-                    s->match_length = s->lookahead;
-            }
-        }
-
-        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->strstart - 1, s->match_length);
-
-            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
-
-            s->lookahead -= s->match_length;
-            s->strstart += s->match_length;
-            s->match_length = 0;
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            _tr_tally_lit (s, s->window[s->strstart], bflush);
-            s->lookahead--;
-            s->strstart++;
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
- * (It will be regenerated if this run of deflate switches away from Huffman.)
- */
-local block_state deflate_huff(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    int bflush;             /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we have a literal to write. */
-        if (s->lookahead == 0) {
-            fill_window(s);
-            if (s->lookahead == 0) {
-                if (flush == Z_NO_FLUSH)
-                    return need_more;
-                break;      /* flush the current block */
-            }
-        }
-
-        /* Output a literal byte */
-        s->match_length = 0;
-        Tracevv((stderr,"%c", s->window[s->strstart]));
-        _tr_tally_lit (s, s->window[s->strstart], bflush);
-        s->lookahead--;
-        s->strstart++;
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
diff --git a/qemu/roms/u-boot/lib/zlib/deflate.h b/qemu/roms/u-boot/lib/zlib/deflate.h
deleted file mode 100644
index cbf0d1ea5..000000000
--- a/qemu/roms/u-boot/lib/zlib/deflate.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2010 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef DEFLATE_H
-#define DEFLATE_H
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip encoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
-    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG
-    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
-    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    ulg high_water;
-    /* High water mark offset in window for initialized bytes -- bytes above
-     * this are set to zero in order to avoid memory check warnings when
-     * longest match routines access bytes past the input.  This is then
-     * updated to the new high water mark.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-#define WIN_INIT MAX_MATCH
-/* Number of bytes after end of data in window to initialize in order to avoid
-   memory checker errors from longest match routines */
-
-        /* in trees.c */
-void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                        ulg stored_len, int last));
-
-#define d_code(dist) \
-   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch ZLIB_INTERNAL _length_code[];
-  extern uch ZLIB_INTERNAL _dist_code[];
-#else
-  extern const uch ZLIB_INTERNAL _length_code[];
-  extern const uch ZLIB_INTERNAL _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
-  { uch cc = (c); \
-    s->d_buf[s->last_lit] = 0; \
-    s->l_buf[s->last_lit++] = cc; \
-    s->dyn_ltree[cc].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-   }
-# define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (length); \
-    ush dist = (distance); \
-    s->d_buf[s->last_lit] = dist; \
-    s->l_buf[s->last_lit++] = len; \
-    dist--; \
-    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
-    s->dyn_dtree[d_code(dist)].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-  }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* DEFLATE_H */
diff --git a/qemu/roms/u-boot/lib/zlib/inffast.c b/qemu/roms/u-boot/lib/zlib/inffast.c
deleted file mode 100644
index 0700e04cb..000000000
--- a/qemu/roms/u-boot/lib/zlib/inffast.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/* inffast.c -- fast decoding
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* U-boot: we already included these
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-*/
-
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
-   Based on testing to date,
-   Pre-increment preferred for:
-   - PowerPC G3 (Adler)
-   - MIPS R5000 (Randers-Pehrson)
-   Post-increment preferred for:
-   - none
-   No measurable difference:
-   - Pentium III (Anderson)
-   - M68060 (Nikl)
- */
-#ifdef POSTINC
-#  define OFF 0
-#  define PUP(a) *(a)++
-#else
-#  define OFF 1
-#  define PUP(a) *++(a)
-#endif
-
-/*
-   Decode literal, length, and distance codes and write out the resulting
-   literal and match bytes until either not enough input or output is
-   available, an end-of-block is encountered, or a data error is encountered.
-   When large enough input and output buffers are supplied to inflate(), for
-   example, a 16K input buffer and a 64K output buffer, more than 95% of the
-   inflate execution time is spent in this routine.
-
-   Entry assumptions:
-
-        state->mode == LEN
-        strm->avail_in >= 6
-        strm->avail_out >= 258
-        start >= strm->avail_out
-        state->bits < 8
-
-   On return, state->mode is one of:
-
-        LEN -- ran out of enough output space or enough available input
-        TYPE -- reached end of block code, inflate() to interpret next block
-        BAD -- error in block data
-
-   Notes:
-
-    - The maximum input bits used by a length/distance pair is 15 bits for the
-      length code, 5 bits for the length extra, 15 bits for the distance code,
-      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
-      Therefore if strm->avail_in >= 6, then there is enough input to avoid
-      checking for available input while decoding.
-
-    - The maximum bytes that a single length/distance pair can output is 258
-      bytes, which is the maximum length that can be coded.  inflate_fast()
-      requires strm->avail_out >= 258 for each loop to avoid checking for
-      output space.
- */
-void inflate_fast(z_streamp strm, unsigned start)
-/* start: inflate()'s starting value for strm->avail_out */
-{
-    struct inflate_state FAR *state;
-    unsigned char FAR *in;      /* local strm->next_in */
-    unsigned char FAR *last;    /* while in < last, enough input available */
-    unsigned char FAR *out;     /* local strm->next_out */
-    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
-    unsigned char FAR *end;     /* while out < end, enough space available */
-#ifdef INFLATE_STRICT
-    unsigned dmax;              /* maximum distance from zlib header */
-#endif
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned write;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
-    unsigned long hold;         /* local strm->hold */
-    unsigned bits;              /* local strm->bits */
-    code const FAR *lcode;      /* local strm->lencode */
-    code const FAR *dcode;      /* local strm->distcode */
-    unsigned lmask;             /* mask for first level of length codes */
-    unsigned dmask;             /* mask for first level of distance codes */
-    code this;                  /* retrieved table entry */
-    unsigned op;                /* code bits, operation, extra bits, or */
-                                /*  window position, window bytes to copy */
-    unsigned len;               /* match length, unused bytes */
-    unsigned dist;              /* match distance */
-    unsigned char FAR *from;    /* where to copy match from */
-
-    /* copy state to local variables */
-    state = (struct inflate_state FAR *)strm->state;
-    in = strm->next_in - OFF;
-    last = in + (strm->avail_in - 5);
-    if (in > last && strm->avail_in > 5) {
-        /*
-         * overflow detected, limit strm->avail_in to the
-         * max. possible size and recalculate last
-         */
-	strm->avail_in = 0xffffffff - (uintptr_t)in;
-        last = in + (strm->avail_in - 5);
-    }
-    out = strm->next_out - OFF;
-    beg = out - (start - strm->avail_out);
-    end = out + (strm->avail_out - 257);
-#ifdef INFLATE_STRICT
-    dmax = state->dmax;
-#endif
-    wsize = state->wsize;
-    whave = state->whave;
-    write = state->write;
-    window = state->window;
-    hold = state->hold;
-    bits = state->bits;
-    lcode = state->lencode;
-    dcode = state->distcode;
-    lmask = (1U << state->lenbits) - 1;
-    dmask = (1U << state->distbits) - 1;
-
-    /* decode literals and length/distances until end-of-block or not enough
-       input data or output space */
-    do {
-        if (bits < 15) {
-            hold += (unsigned long)(PUP(in)) << bits;
-            bits += 8;
-            hold += (unsigned long)(PUP(in)) << bits;
-            bits += 8;
-        }
-        this = lcode[hold & lmask];
-      dolen:
-        op = (unsigned)(this.bits);
-        hold >>= op;
-        bits -= op;
-        op = (unsigned)(this.op);
-        if (op == 0) {                          /* literal */
-            Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
-                    "inflate:         literal '%c'\n" :
-                    "inflate:         literal 0x%02x\n", this.val));
-            PUP(out) = (unsigned char)(this.val);
-        }
-        else if (op & 16) {                     /* length base */
-            len = (unsigned)(this.val);
-            op &= 15;                           /* number of extra bits */
-            if (op) {
-                if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
-                    bits += 8;
-                }
-                len += (unsigned)hold & ((1U << op) - 1);
-                hold >>= op;
-                bits -= op;
-            }
-            Tracevv((stderr, "inflate:         length %u\n", len));
-            if (bits < 15) {
-                hold += (unsigned long)(PUP(in)) << bits;
-                bits += 8;
-                hold += (unsigned long)(PUP(in)) << bits;
-                bits += 8;
-            }
-            this = dcode[hold & dmask];
-          dodist:
-            op = (unsigned)(this.bits);
-            hold >>= op;
-            bits -= op;
-            op = (unsigned)(this.op);
-            if (op & 16) {                      /* distance base */
-                dist = (unsigned)(this.val);
-                op &= 15;                       /* number of extra bits */
-                if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
-                    bits += 8;
-                    if (bits < op) {
-                        hold += (unsigned long)(PUP(in)) << bits;
-                        bits += 8;
-                    }
-                }
-                dist += (unsigned)hold & ((1U << op) - 1);
-#ifdef INFLATE_STRICT
-                if (dist > dmax) {
-                    strm->msg = (char *)"invalid distance too far back";
-                    state->mode = BAD;
-                    break;
-                }
-#endif
-                hold >>= op;
-                bits -= op;
-                Tracevv((stderr, "inflate:         distance %u\n", dist));
-                op = (unsigned)(out - beg);     /* max distance in output */
-                if (dist > op) {                /* see if copy from window */
-                    op = dist - op;             /* distance back in window */
-                    if (op > whave) {
-                        strm->msg = (char *)"invalid distance too far back";
-                        state->mode = BAD;
-                        break;
-                    }
-                    from = window - OFF;
-                    if (write == 0) {           /* very common case */
-                        from += wsize - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    else if (write < op) {      /* wrap around window */
-                        from += wsize + write - op;
-                        op -= write;
-                        if (op < len) {         /* some from end of window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = window - OFF;
-                            if (write < len) {  /* some from start of window */
-                                op = write;
-                                len -= op;
-                                do {
-                                    PUP(out) = PUP(from);
-                                } while (--op);
-                                from = out - dist;      /* rest from output */
-                            }
-                        }
-                    }
-                    else {                      /* contiguous in window */
-                        from += write - op;
-                        if (op < len) {         /* some from window */
-                            len -= op;
-                            do {
-                                PUP(out) = PUP(from);
-                            } while (--op);
-                            from = out - dist;  /* rest from output */
-                        }
-                    }
-                    while (len > 2) {
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        len -= 3;
-                    }
-                    if (len) {
-                        PUP(out) = PUP(from);
-                        if (len > 1)
-                            PUP(out) = PUP(from);
-                    }
-                }
-                else {
-		    unsigned short *sout;
-		    unsigned long loops;
-
-                    from = out - dist;          /* copy direct from output */
-                    /* minimum length is three */
-		    /* Align out addr */
-		    if (!((long)(out - 1 + OFF) & 1)) {
-			PUP(out) = PUP(from);
-			len--;
-		    }
-		    sout = (unsigned short *)(out - OFF);
-		    if (dist > 2 ) {
-			unsigned short *sfrom;
-
-			sfrom = (unsigned short *)(from - OFF);
-			loops = len >> 1;
-			do
-			    PUP(sout) = get_unaligned(++sfrom);
-			while (--loops);
-			out = (unsigned char *)sout + OFF;
-			from = (unsigned char *)sfrom + OFF;
-		    } else { /* dist == 1 or dist == 2 */
-			unsigned short pat16;
-
-			pat16 = *(sout-2+2*OFF);
-			if (dist == 1)
-#if defined(__BIG_ENDIAN)
-			    pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8);
-#elif defined(__LITTLE_ENDIAN)
-			    pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8);
-#else
-#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined
-#endif
-			loops = len >> 1;
-			do
-			    PUP(sout) = pat16;
-			while (--loops);
-			out = (unsigned char *)sout + OFF;
-		    }
-		    if (len & 1)
-			PUP(out) = PUP(from);
-                }
-            }
-            else if ((op & 64) == 0) {          /* 2nd level distance code */
-                this = dcode[this.val + (hold & ((1U << op) - 1))];
-                goto dodist;
-            }
-            else {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-        }
-        else if ((op & 64) == 0) {              /* 2nd level length code */
-            this = lcode[this.val + (hold & ((1U << op) - 1))];
-            goto dolen;
-        }
-        else if (op & 32) {                     /* end-of-block */
-            Tracevv((stderr, "inflate:         end of block\n"));
-            state->mode = TYPE;
-            break;
-        }
-        else {
-            strm->msg = (char *)"invalid literal/length code";
-            state->mode = BAD;
-            break;
-        }
-    } while (in < last && out < end);
-
-    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
-    len = bits >> 3;
-    in -= len;
-    bits -= len << 3;
-    hold &= (1U << bits) - 1;
-
-    /* update state and return */
-    strm->next_in = in + OFF;
-    strm->next_out = out + OFF;
-    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
-    strm->avail_out = (unsigned)(out < end ?
-                                 257 + (end - out) : 257 - (out - end));
-    state->hold = hold;
-    state->bits = bits;
-    return;
-}
-
-/*
-   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
-   - Using bit fields for code structure
-   - Different op definition to avoid & for extra bits (do & for table bits)
-   - Three separate decoding do-loops for direct, window, and write == 0
-   - Special case for distance > 1 copies to do overlapped load and store copy
-   - Explicit branch predictions (based on measured branch probabilities)
-   - Deferring match copy and interspersed it with decoding subsequent codes
-   - Swapping literal/length else
-   - Swapping window/direct else
-   - Larger unrolled copy loops (three is about right)
-   - Moving len -= 3 statement into middle of loop
- */
-
-#endif /* !ASMINF */
diff --git a/qemu/roms/u-boot/lib/zlib/inffast.h b/qemu/roms/u-boot/lib/zlib/inffast.h
deleted file mode 100644
index 1e88d2d97..000000000
--- a/qemu/roms/u-boot/lib/zlib/inffast.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-void inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/qemu/roms/u-boot/lib/zlib/inffixed.h b/qemu/roms/u-boot/lib/zlib/inffixed.h
deleted file mode 100644
index 75ed4b597..000000000
--- a/qemu/roms/u-boot/lib/zlib/inffixed.h
+++ /dev/null
@@ -1,94 +0,0 @@
-    /* inffixed.h -- table for decoding fixed codes
-     * Generated automatically by makefixed().
-     */
-
-    /* WARNING: this file should *not* be used by applications. It
-       is part of the implementation of the compression library and
-       is subject to change. Applications should only use zlib.h.
-     */
-
-    static const code lenfix[512] = {
-        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
-        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
-        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
-        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
-        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
-        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
-        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
-        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
-        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
-        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
-        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
-        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
-        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
-        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
-        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
-        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
-        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
-        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
-        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
-        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
-        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
-        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
-        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
-        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
-        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
-        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
-        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
-        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
-        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
-        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
-        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
-        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
-        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
-        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
-        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
-        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
-        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
-        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
-        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
-        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
-        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
-        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
-        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
-        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
-        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
-        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
-        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
-        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
-        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
-        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
-        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
-        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
-        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
-        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
-        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
-        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
-        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
-        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
-        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
-        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
-        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
-        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
-        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
-        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
-        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
-        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
-        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
-        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
-        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
-        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
-        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
-        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
-        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
-        {0,9,255}
-    };
-
-    static const code distfix[32] = {
-        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
-        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
-        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
-        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
-        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
-        {22,5,193},{64,5,0}
-    };
diff --git a/qemu/roms/u-boot/lib/zlib/inflate.c b/qemu/roms/u-boot/lib/zlib/inflate.c
deleted file mode 100644
index 6411c4793..000000000
--- a/qemu/roms/u-boot/lib/zlib/inflate.c
+++ /dev/null
@@ -1,943 +0,0 @@
-/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, unsigned out));
-
-int ZEXPORT inflateReset(z_streamp strm)
-{
-    struct inflate_state FAR *state;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    strm->total_in = strm->total_out = state->total = 0;
-    strm->msg = Z_NULL;
-    strm->adler = 1;        /* to support ill-conceived Java test suite */
-    state->mode = HEAD;
-    state->last = 0;
-    state->havedict = 0;
-    state->dmax = 32768U;
-    state->head = Z_NULL;
-    state->wsize = 0;
-    state->whave = 0;
-    state->write = 0;
-    state->hold = 0;
-    state->bits = 0;
-    state->lencode = state->distcode = state->next = state->codes;
-    WATCHDOG_RESET();
-    Tracev((stderr, "inflate: reset\n"));
-    return Z_OK;
-}
-
-int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version,
-			  int stream_size)
-{
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
-    state = (struct inflate_state FAR *)
-            ZALLOC(strm, 1, sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    if (windowBits < 0) {
-        state->wrap = 0;
-        windowBits = -windowBits;
-    }
-    else {
-        state->wrap = (windowBits >> 4) + 1;
-#ifdef GUNZIP
-        if (windowBits < 48) windowBits &= 15;
-#endif
-    }
-    if (windowBits < 8 || windowBits > 15) {
-        ZFREE(strm, state);
-        strm->state = Z_NULL;
-        return Z_STREAM_ERROR;
-    }
-    state->wbits = (unsigned)windowBits;
-    state->window = Z_NULL;
-    return inflateReset(strm);
-}
-
-int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size)
-{
-    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
-}
-
-local void fixedtables(struct inflate_state FAR *state)
-{
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-/*
-   Update the window with the last wsize (normally 32K) bytes written before
-   returning.  If window does not exist yet, create it.  This is only called
-   when a window is already in use, or when output has been written during this
-   inflate call, but the end of the deflate stream has not been reached yet.
-   It is also called to create a window for dictionary data when a dictionary
-   is loaded.
-
-   Providing output buffers larger than 32K to inflate() should provide a speed
-   advantage, since only the last 32K of output is copied to the sliding window
-   upon return from inflate(), and since all distances after the first 32K of
-   output will fall in the output data, making match copies simpler and faster.
-   The advantage may be dependent on the size of the processor's data caches.
- */
-local int updatewindow(z_streamp strm, unsigned out)
-{
-    struct inflate_state FAR *state;
-    unsigned copy, dist;
-
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* if it hasn't been done already, allocate space for the window */
-    if (state->window == Z_NULL) {
-        state->window = (unsigned char FAR *)
-                        ZALLOC(strm, 1U << state->wbits,
-                               sizeof(unsigned char));
-        if (state->window == Z_NULL) return 1;
-    }
-
-    /* if window not in use yet, initialize */
-    if (state->wsize == 0) {
-        state->wsize = 1U << state->wbits;
-        state->write = 0;
-        state->whave = 0;
-    }
-
-    /* copy state->wsize or less output bytes into the circular window */
-    copy = out - strm->avail_out;
-    if (copy >= state->wsize) {
-        zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
-        state->write = 0;
-        state->whave = state->wsize;
-    }
-    else {
-        dist = state->wsize - state->write;
-        if (dist > copy) dist = copy;
-        zmemcpy(state->window + state->write, strm->next_out - copy, dist);
-        copy -= dist;
-        if (copy) {
-            zmemcpy(state->window, strm->next_out - copy, copy);
-            state->write = copy;
-            state->whave = state->wsize;
-        }
-        else {
-            state->write += dist;
-            if (state->write == state->wsize) state->write = 0;
-            if (state->whave < state->wsize) state->whave += dist;
-        }
-    }
-    return 0;
-}
-
-/* Macros for inflate(): */
-
-/* check function to use adler32() for zlib or crc32() for gzip */
-#ifdef GUNZIP
-#  define UPDATE(check, buf, len) \
-    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
-#else
-#  define UPDATE(check, buf, len) adler32(check, buf, len)
-#endif
-
-/* check macros for header crc */
-#ifdef GUNZIP
-#  define CRC2(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        check = crc32(check, hbuf, 2); \
-    } while (0)
-
-#  define CRC4(check, word) \
-    do { \
-        hbuf[0] = (unsigned char)(word); \
-        hbuf[1] = (unsigned char)((word) >> 8); \
-        hbuf[2] = (unsigned char)((word) >> 16); \
-        hbuf[3] = (unsigned char)((word) >> 24); \
-        check = crc32(check, hbuf, 4); \
-    } while (0)
-#endif
-
-/* Load registers with state in inflate() for speed */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Restore state from registers in inflate() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflate()
-   if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        if (have == 0) goto inf_leave; \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflate(). */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
-    ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
-     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
-/*
-   inflate() uses a state machine to process as much input data and generate as
-   much output data as possible before returning.  The state machine is
-   structured roughly as follows:
-
-    for (;;) switch (state) {
-    ...
-    case STATEn:
-        if (not enough input data or output space to make progress)
-            return;
-        ... make progress ...
-        state = STATEm;
-        break;
-    ...
-    }
-
-   so when inflate() is called again, the same case is attempted again, and
-   if the appropriate resources are provided, the machine proceeds to the
-   next state.  The NEEDBITS() macro is usually the way the state evaluates
-   whether it can proceed or should return.  NEEDBITS() does the return if
-   the requested bits are not available.  The typical use of the BITS macros
-   is:
-
-        NEEDBITS(n);
-        ... do something with BITS(n) ...
-        DROPBITS(n);
-
-   where NEEDBITS(n) either returns from inflate() if there isn't enough
-   input left to load n bits into the accumulator, or it continues.  BITS(n)
-   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
-   the low n bits off the accumulator.  INITBITS() clears the accumulator
-   and sets the number of available bits to zero.  BYTEBITS() discards just
-   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
-   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
-
-   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
-   if there is no input available.  The decoding of variable length codes uses
-   PULLBYTE() directly in order to pull just enough bytes to decode the next
-   code, and no more.
-
-   Some states loop until they get enough input, making sure that enough
-   state information is maintained to continue the loop where it left off
-   if NEEDBITS() returns in the loop.  For example, want, need, and keep
-   would all have to actually be part of the saved state in case NEEDBITS()
-   returns:
-
-    case STATEw:
-        while (want < need) {
-            NEEDBITS(n);
-            keep[want++] = BITS(n);
-            DROPBITS(n);
-        }
-        state = STATEx;
-    case STATEx:
-
-   As shown above, if the next state is also the next case, then the break
-   is omitted.
-
-   A state may also return if there is not enough output space available to
-   complete that state.  Those states are copying stored data, writing a
-   literal byte, and copying a matching string.
-
-   When returning, a "goto inf_leave" is used to update the total counters,
-   update the check value, and determine whether any progress has been made
-   during that inflate() call in order to return the proper return code.
-   Progress is defined as a change in either strm->avail_in or strm->avail_out.
-   When there is a window, goto inf_leave will update the window with the last
-   output written.  If a goto inf_leave occurs in the middle of decompression
-   and there is no window currently, goto inf_leave will create one and copy
-   output to the window for the next call of inflate().
-
-   In this implementation, the flush parameter of inflate() only affects the
-   return code (per zlib.h).  inflate() always writes as much as possible to
-   strm->next_out, given the space available and the provided input--the effect
-   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
-   the allocation of and copying into a sliding window until necessary, which
-   provides the effect documented in zlib.h for Z_FINISH when the entire input
-   stream available.  So the only thing the flush parameter actually does is:
-   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
-   will return Z_BUF_ERROR if it has not reached the end of the stream.
- */
-int ZEXPORT inflate(z_streamp strm, int flush)
-{
-    struct inflate_state FAR *state;
-    unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned in, out;           /* save starting available input and output */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code this;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-#ifdef GUNZIP
-    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
-#endif
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0))
-        return Z_STREAM_ERROR;
-
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
-    LOAD();
-    in = have;
-    out = left;
-    ret = Z_OK;
-    for (;;)
-        switch (state->mode) {
-        case HEAD:
-            if (state->wrap == 0) {
-                state->mode = TYPEDO;
-                break;
-            }
-            NEEDBITS(16);
-#ifdef GUNZIP
-            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
-                state->check = crc32(0L, Z_NULL, 0);
-                CRC2(state->check, hold);
-                INITBITS();
-                state->mode = FLAGS;
-                break;
-            }
-            state->flags = 0;           /* expect zlib header */
-            if (state->head != Z_NULL)
-                state->head->done = -1;
-            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
-#else
-            if (
-#endif
-                ((BITS(8) << 8) + (hold >> 8)) % 31) {
-                strm->msg = (char *)"incorrect header check";
-                state->mode = BAD;
-                break;
-            }
-            if (BITS(4) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            DROPBITS(4);
-            len = BITS(4) + 8;
-            if (len > state->wbits) {
-                strm->msg = (char *)"invalid window size";
-                state->mode = BAD;
-                break;
-            }
-            state->dmax = 1U << len;
-            Tracev((stderr, "inflate:   zlib header ok\n"));
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = hold & 0x200 ? DICTID : TYPE;
-            INITBITS();
-            break;
-#ifdef GUNZIP
-        case FLAGS:
-            NEEDBITS(16);
-            state->flags = (int)(hold);
-            if ((state->flags & 0xff) != Z_DEFLATED) {
-                strm->msg = (char *)"unknown compression method";
-                state->mode = BAD;
-                break;
-            }
-            if (state->flags & 0xe000) {
-                strm->msg = (char *)"unknown header flags set";
-                state->mode = BAD;
-                break;
-            }
-            if (state->head != Z_NULL)
-                state->head->text = (int)((hold >> 8) & 1);
-            if (state->flags & 0x0200) CRC2(state->check, hold);
-            INITBITS();
-            state->mode = TIME;
-        case TIME:
-            NEEDBITS(32);
-            if (state->head != Z_NULL)
-                state->head->time = hold;
-            if (state->flags & 0x0200) CRC4(state->check, hold);
-            INITBITS();
-            state->mode = OS;
-        case OS:
-            NEEDBITS(16);
-            if (state->head != Z_NULL) {
-                state->head->xflags = (int)(hold & 0xff);
-                state->head->os = (int)(hold >> 8);
-            }
-            if (state->flags & 0x0200) CRC2(state->check, hold);
-            INITBITS();
-            state->mode = EXLEN;
-        case EXLEN:
-            if (state->flags & 0x0400) {
-                NEEDBITS(16);
-                state->length = (unsigned)(hold);
-                if (state->head != Z_NULL)
-                    state->head->extra_len = (unsigned)hold;
-                if (state->flags & 0x0200) CRC2(state->check, hold);
-                INITBITS();
-            }
-            else if (state->head != Z_NULL)
-                state->head->extra = Z_NULL;
-            state->mode = EXTRA;
-        case EXTRA:
-            if (state->flags & 0x0400) {
-                copy = state->length;
-                if (copy > have) copy = have;
-                if (copy) {
-                    if (state->head != Z_NULL &&
-                        state->head->extra != Z_NULL) {
-                        len = state->head->extra_len - state->length;
-                        zmemcpy(state->head->extra + len, next,
-                                len + copy > state->head->extra_max ?
-                                state->head->extra_max - len : copy);
-                    }
-                    if (state->flags & 0x0200)
-                        state->check = crc32(state->check, next, copy);
-                    have -= copy;
-                    next += copy;
-                    state->length -= copy;
-                }
-                if (state->length) goto inf_leave;
-            }
-            state->length = 0;
-            state->mode = NAME;
-        case NAME:
-            if (state->flags & 0x0800) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->name != Z_NULL &&
-                            state->length < state->head->name_max)
-                        state->head->name[state->length++] = len;
-                } while (len && copy < have);
-                if (state->flags & 0x0200)
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->name = Z_NULL;
-            state->length = 0;
-            state->mode = COMMENT;
-        case COMMENT:
-            if (state->flags & 0x1000) {
-                if (have == 0) goto inf_leave;
-                copy = 0;
-                do {
-                    len = (unsigned)(next[copy++]);
-                    if (state->head != Z_NULL &&
-                            state->head->comment != Z_NULL &&
-                            state->length < state->head->comm_max)
-                        state->head->comment[state->length++] = len;
-                } while (len && copy < have);
-                if (state->flags & 0x0200)
-                    state->check = crc32(state->check, next, copy);
-                have -= copy;
-                next += copy;
-                if (len) goto inf_leave;
-            }
-            else if (state->head != Z_NULL)
-                state->head->comment = Z_NULL;
-            state->mode = HCRC;
-        case HCRC:
-            if (state->flags & 0x0200) {
-                NEEDBITS(16);
-                if (hold != (state->check & 0xffff)) {
-                    strm->msg = (char *)"header crc mismatch";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-            }
-            if (state->head != Z_NULL) {
-                state->head->hcrc = (int)((state->flags >> 9) & 1);
-                state->head->done = 1;
-            }
-            strm->adler = state->check = crc32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-            break;
-#endif
-        case DICTID:
-            NEEDBITS(32);
-            strm->adler = state->check = REVERSE(hold);
-            INITBITS();
-            state->mode = DICT;
-        case DICT:
-            if (state->havedict == 0) {
-                RESTORE();
-                return Z_NEED_DICT;
-            }
-            strm->adler = state->check = adler32(0L, Z_NULL, 0);
-            state->mode = TYPE;
-        case TYPE:
-	    WATCHDOG_RESET();
-            if (flush == Z_BLOCK) goto inf_leave;
-        case TYPEDO:
-            if (state->last) {
-                BYTEBITS();
-                state->mode = CHECK;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN;              /* decode codes */
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-        case STORED:
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-            state->mode = COPY;
-        case COPY:
-            copy = state->length;
-            if (copy) {
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                if (copy == 0) goto inf_leave;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-                break;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-        case TABLE:
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-            state->have = 0;
-            state->mode = LENLENS;
-        case LENLENS:
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-            state->have = 0;
-            state->mode = CODELENS;
-        case CODELENS:
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    this = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(this.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (this.val < 16) {
-                    NEEDBITS(this.bits);
-                    DROPBITS(this.bits);
-                    state->lens[state->have++] = this.val;
-                }
-                else {
-                    if (this.val == 16) {
-                        NEEDBITS(this.bits + 2);
-                        DROPBITS(this.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = state->lens[state->have - 1];
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (this.val == 17) {
-                        NEEDBITS(this.bits + 3);
-                        DROPBITS(this.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(this.bits + 7);
-                        DROPBITS(this.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* build code tables */
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (code const FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN;
-        case LEN:
-	    WATCHDOG_RESET();
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                inflate_fast(strm, out);
-                LOAD();
-                break;
-            }
-            for (;;) {
-                this = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(this.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (this.op && (this.op & 0xf0) == 0) {
-                last = this;
-                for (;;) {
-                    this = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(this.bits);
-            state->length = (unsigned)this.val;
-            if ((int)(this.op) == 0) {
-                Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", this.val));
-                state->mode = LIT;
-                break;
-            }
-            if (this.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->mode = TYPE;
-                break;
-            }
-            if (this.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-            state->extra = (unsigned)(this.op) & 15;
-            state->mode = LENEXT;
-        case LENEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-            state->mode = DIST;
-        case DIST:
-            for (;;) {
-                this = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(this.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((this.op & 0xf0) == 0) {
-                last = this;
-                for (;;) {
-                    this = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(this.bits);
-            if (this.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)this.val;
-            state->extra = (unsigned)(this.op) & 15;
-            state->mode = DISTEXT;
-        case DISTEXT:
-            if (state->extra) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-#ifdef INFLATE_STRICT
-            if (state->offset > state->dmax) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            if (state->offset > state->whave + out - left) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-            state->mode = MATCH;
-        case MATCH:
-            if (left == 0) goto inf_leave;
-            copy = out - left;
-            if (state->offset > copy) {         /* copy from window */
-                copy = state->offset - copy;
-                if (copy > state->write) {
-                    copy -= state->write;
-                    from = state->window + (state->wsize - copy);
-                }
-                else
-                    from = state->window + (state->write - copy);
-                if (copy > state->length) copy = state->length;
-            }
-            else {                              /* copy from output */
-                from = put - state->offset;
-                copy = state->length;
-            }
-            if (copy > left) copy = left;
-            left -= copy;
-            state->length -= copy;
-            do {
-                *put++ = *from++;
-            } while (--copy);
-            if (state->length == 0) state->mode = LEN;
-            break;
-        case LIT:
-            if (left == 0) goto inf_leave;
-            *put++ = (unsigned char)(state->length);
-            left--;
-            state->mode = LEN;
-            break;
-        case CHECK:
-            if (state->wrap) {
-                NEEDBITS(32);
-                out -= left;
-                strm->total_out += out;
-                state->total += out;
-                if (out)
-                    strm->adler = state->check =
-                        UPDATE(state->check, put - out, out);
-                out = left;
-                if ((
-#ifdef GUNZIP
-                     state->flags ? hold :
-#endif
-                     REVERSE(hold)) != state->check) {
-                    strm->msg = (char *)"incorrect data check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   check matches trailer\n"));
-            }
-#ifdef GUNZIP
-            state->mode = LENGTH;
-        case LENGTH:
-            if (state->wrap && state->flags) {
-                NEEDBITS(32);
-                if (hold != (state->total & 0xffffffffUL)) {
-                    strm->msg = (char *)"incorrect length check";
-                    state->mode = BAD;
-                    break;
-                }
-                INITBITS();
-                Tracev((stderr, "inflate:   length matches trailer\n"));
-            }
-#endif
-            state->mode = DONE;
-        case DONE:
-            ret = Z_STREAM_END;
-            goto inf_leave;
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-        case MEM:
-            return Z_MEM_ERROR;
-        case SYNC:
-        default:
-            return Z_STREAM_ERROR;
-        }
-
-    /*
-       Return from inflate(), updating the total counts and the check value.
-       If there was no progress during the inflate() call, return a buffer
-       error.  Call updatewindow() to create and/or update the window state.
-       Note: a memory error from inflate() is non-recoverable.
-     */
-  inf_leave:
-    RESTORE();
-    if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
-        if (updatewindow(strm, out)) {
-            state->mode = MEM;
-            return Z_MEM_ERROR;
-        }
-    in -= strm->avail_in;
-    out -= strm->avail_out;
-    strm->total_in += in;
-    strm->total_out += out;
-    state->total += out;
-    if (state->wrap && out)
-        strm->adler = state->check =
-            UPDATE(state->check, strm->next_out - out, out);
-    strm->data_type = state->bits + (state->last ? 64 : 0) +
-                      (state->mode == TYPE ? 128 : 0);
-    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
-        ret = Z_BUF_ERROR;
-    return ret;
-}
-
-int ZEXPORT inflateEnd(z_streamp strm)
-{
-    struct inflate_state FAR *state;
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-    if (state->window != Z_NULL) {
-	WATCHDOG_RESET();
-	ZFREE(strm, state->window);
-    }
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}
diff --git a/qemu/roms/u-boot/lib/zlib/inflate.h b/qemu/roms/u-boot/lib/zlib/inflate.h
deleted file mode 100644
index 07bd3e78a..000000000
--- a/qemu/roms/u-boot/lib/zlib/inflate.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip decoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
-    HEAD,       /* i: waiting for magic header */
-    FLAGS,      /* i: waiting for method and flags (gzip) */
-    TIME,       /* i: waiting for modification time (gzip) */
-    OS,         /* i: waiting for extra flags and operating system (gzip) */
-    EXLEN,      /* i: waiting for extra length (gzip) */
-    EXTRA,      /* i: waiting for extra bytes (gzip) */
-    NAME,       /* i: waiting for end of file name (gzip) */
-    COMMENT,    /* i: waiting for end of comment (gzip) */
-    HCRC,       /* i: waiting for header crc (gzip) */
-    DICTID,     /* i: waiting for dictionary check value */
-    DICT,       /* waiting for inflateSetDictionary() call */
-        TYPE,       /* i: waiting for type bits, including last-flag bit */
-        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
-        STORED,     /* i: waiting for stored size (length and complement) */
-        COPY,       /* i/o: waiting for input or output to copy stored block */
-        TABLE,      /* i: waiting for dynamic block table lengths */
-        LENLENS,    /* i: waiting for code length code lengths */
-        CODELENS,   /* i: waiting for length/lit and distance code lengths */
-            LEN,        /* i: waiting for length/lit code */
-            LENEXT,     /* i: waiting for length extra bits */
-            DIST,       /* i: waiting for distance code */
-            DISTEXT,    /* i: waiting for distance extra bits */
-            MATCH,      /* o: waiting for output space to copy string */
-            LIT,        /* o: waiting for output space to write literal */
-    CHECK,      /* i: waiting for 32-bit check value */
-    LENGTH,     /* i: waiting for 32-bit length (gzip) */
-    DONE,       /* finished check, done -- remain here until reset */
-    BAD,        /* got a data error -- remain here until reset */
-    MEM,        /* got an inflate() memory error -- remain here until reset */
-    SYNC        /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
-    State transitions between above modes -
-
-    (most modes can go to the BAD or MEM mode -- not shown for clarity)
-
-    Process header:
-        HEAD -> (gzip) or (zlib)
-        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
-        NAME -> COMMENT -> HCRC -> TYPE
-        (zlib) -> DICTID or TYPE
-        DICTID -> DICT -> TYPE
-    Read deflate blocks:
-            TYPE -> STORED or TABLE or LEN or CHECK
-            STORED -> COPY -> TYPE
-            TABLE -> LENLENS -> CODELENS -> LEN
-    Read deflate codes:
-                LEN -> LENEXT or LIT or TYPE
-                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
-                LIT -> LEN
-    Process trailer:
-        CHECK -> LENGTH -> DONE
- */
-
-/* state maintained between inflate() calls.  Approximately 7K bytes. */
-struct inflate_state {
-    inflate_mode mode;          /* current inflate mode */
-    int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
-    int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
-    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
-    unsigned long check;        /* protected copy of check value */
-    unsigned long total;        /* protected copy of output count */
-    gz_headerp head;            /* where to save gzip header information */
-        /* sliding window */
-    unsigned wbits;             /* log base 2 of requested window size */
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned write;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if needed */
-        /* bit accumulator */
-    unsigned long hold;         /* input bit accumulator */
-    unsigned bits;              /* number of bits in "in" */
-        /* for string and stored block copying */
-    unsigned length;            /* literal or length of data to copy */
-    unsigned offset;            /* distance back to copy string from */
-        /* for table and code decoding */
-    unsigned extra;             /* extra bits needed */
-        /* fixed and dynamic code tables */
-    code const FAR *lencode;    /* starting table for length/literal codes */
-    code const FAR *distcode;   /* starting table for distance codes */
-    unsigned lenbits;           /* index bits for lencode */
-    unsigned distbits;          /* index bits for distcode */
-        /* dynamic table building */
-    unsigned ncode;             /* number of code length code lengths */
-    unsigned nlen;              /* number of length code lengths */
-    unsigned ndist;             /* number of distance code lengths */
-    unsigned have;              /* number of code lengths in lens[] */
-    code FAR *next;             /* next available space in codes[] */
-    unsigned short lens[320];   /* temporary storage for code lengths */
-    unsigned short work[288];   /* work area for code table building */
-    code codes[ENOUGH];         /* space for code tables */
-};
diff --git a/qemu/roms/u-boot/lib/zlib/inftrees.c b/qemu/roms/u-boot/lib/zlib/inftrees.c
deleted file mode 100644
index 7474a52e7..000000000
--- a/qemu/roms/u-boot/lib/zlib/inftrees.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* U-boot: we already included these
-#include "zutil.h"
-#include "inftrees.h"
-*/
-
-#define MAXBITS 15
-
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/*
-   Build a set of tables to decode the provided canonical Huffman code.
-   The code lengths are lens[0..codes-1].  The result starts at *table,
-   whose indices are 0..2^bits-1.  work is a writable array of at least
-   lens shorts, which is used as a work area.  type is the type of code
-   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
-   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
-   on return points to the next available entry's address.  bits is the
-   requested root table index bits, and on return it is the actual root
-   table index bits.  It will differ if the request is greater than the
-   longest code or if it is less than the shortest code.
- */
-int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes,
-		  code FAR * FAR *table, unsigned FAR *bits,
-		  unsigned short FAR *work)
-{
-    unsigned len;               /* a code's length in bits */
-    unsigned sym;               /* index of code symbols */
-    unsigned min, max;          /* minimum and maximum code lengths */
-    unsigned root;              /* number of index bits for root table */
-    unsigned curr;              /* number of index bits for current table */
-    unsigned drop;              /* code bits to drop for sub-table */
-    int left;                   /* number of prefix codes available */
-    unsigned used;              /* code entries in table used */
-    unsigned huff;              /* Huffman code */
-    unsigned incr;              /* for incrementing code, index */
-    unsigned fill;              /* index for replicating entries */
-    unsigned low;               /* low bits for current root entry */
-    unsigned mask;              /* mask for low root bits */
-    code this;                  /* table entry for duplication */
-    code FAR *next;             /* next available space in table */
-    const unsigned short FAR *base;     /* base value table to use */
-    const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
-    unsigned short count[MAXBITS+1];    /* number of codes of each length */
-    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
-    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
-        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
-    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577, 0, 0};
-    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
-        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
-        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
-        28, 28, 29, 29, 64, 64};
-
-    /*
-       Process a set of code lengths to create a canonical Huffman code.  The
-       code lengths are lens[0..codes-1].  Each length corresponds to the
-       symbols 0..codes-1.  The Huffman code is generated by first sorting the
-       symbols by length from short to long, and retaining the symbol order
-       for codes with equal lengths.  Then the code starts with all zero bits
-       for the first code of the shortest length, and the codes are integer
-       increments for the same length, and zeros are appended as the length
-       increases.  For the deflate format, these bits are stored backwards
-       from their more natural integer increment ordering, and so when the
-       decoding tables are built in the large loop below, the integer codes
-       are incremented backwards.
-
-       This routine assumes, but does not check, that all of the entries in
-       lens[] are in the range 0..MAXBITS.  The caller must assure this.
-       1..MAXBITS is interpreted as that code length.  zero means that that
-       symbol does not occur in this code.
-
-       The codes are sorted by computing a count of codes for each length,
-       creating from that a table of starting indices for each length in the
-       sorted table, and then entering the symbols in order in the sorted
-       table.  The sorted table is work[], with that space being provided by
-       the caller.
-
-       The length counts are used for other purposes as well, i.e. finding
-       the minimum and maximum length codes, determining if there are any
-       codes at all, checking for a valid set of lengths, and looking ahead
-       at length counts to determine sub-table sizes when building the
-       decoding tables.
-     */
-
-    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
-    for (len = 0; len <= MAXBITS; len++)
-        count[len] = 0;
-    for (sym = 0; sym < codes; sym++)
-        count[lens[sym]]++;
-
-    /* bound code lengths, force root to be within code lengths */
-    root = *bits;
-    for (max = MAXBITS; max >= 1; max--)
-        if (count[max] != 0) break;
-    if (root > max) root = max;
-    if (max == 0) {                     /* no symbols to code at all */
-        this.op = (unsigned char)64;    /* invalid code marker */
-        this.bits = (unsigned char)1;
-        this.val = (unsigned short)0;
-        *(*table)++ = this;             /* make a table to force an error */
-        *(*table)++ = this;
-        *bits = 1;
-        return 0;     /* no symbols, but wait for decoding to report error */
-    }
-    for (min = 1; min <= MAXBITS; min++)
-        if (count[min] != 0) break;
-    if (root < min) root = min;
-
-    /* check for an over-subscribed or incomplete set of lengths */
-    left = 1;
-    for (len = 1; len <= MAXBITS; len++) {
-        left <<= 1;
-        left -= count[len];
-        if (left < 0) return -1;        /* over-subscribed */
-    }
-    if (left > 0 && (type == CODES || max != 1))
-        return -1;                      /* incomplete set */
-
-    /* generate offsets into symbol table for each length for sorting */
-    offs[1] = 0;
-    for (len = 1; len < MAXBITS; len++)
-        offs[len + 1] = offs[len] + count[len];
-
-    /* sort symbols by length, by symbol order within each length */
-    for (sym = 0; sym < codes; sym++)
-        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
-
-    /*
-       Create and fill in decoding tables.  In this loop, the table being
-       filled is at next and has curr index bits.  The code being used is huff
-       with length len.  That code is converted to an index by dropping drop
-       bits off of the bottom.  For codes where len is less than drop + curr,
-       those top drop + curr - len bits are incremented through all values to
-       fill the table with replicated entries.
-
-       root is the number of index bits for the root table.  When len exceeds
-       root, sub-tables are created pointed to by the root entry with an index
-       of the low root bits of huff.  This is saved in low to check for when a
-       new sub-table should be started.  drop is zero when the root table is
-       being filled, and drop is root when sub-tables are being filled.
-
-       When a new sub-table is needed, it is necessary to look ahead in the
-       code lengths to determine what size sub-table is needed.  The length
-       counts are used for this, and so count[] is decremented as codes are
-       entered in the tables.
-
-       used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked when a LENS table is being made
-       against the space in *table, ENOUGH, minus the maximum space needed by
-       the worst case distance code, MAXD.  This should never happen, but the
-       sufficiency of ENOUGH has not been proven exhaustively, hence the check.
-       This assumes that when type == LENS, bits == 9.
-
-       sym increments through all symbols, and the loop terminates when
-       all codes of length max, i.e. all codes, have been processed.  This
-       routine permits incomplete codes, so another loop after this one fills
-       in the rest of the decoding tables with invalid code markers.
-     */
-
-    /* set up for code type */
-    switch (type) {
-    case CODES:
-        base = extra = work;    /* dummy value--not used */
-        end = 19;
-        break;
-    case LENS:
-        base = lbase;
-        base -= 257;
-        extra = lext;
-        extra -= 257;
-        end = 256;
-        break;
-    default:            /* DISTS */
-        base = dbase;
-        extra = dext;
-        end = -1;
-    }
-
-    /* initialize state for loop */
-    huff = 0;                   /* starting code */
-    sym = 0;                    /* starting code symbol */
-    len = min;                  /* starting code length */
-    next = *table;              /* current table to fill in */
-    curr = root;                /* current table index bits */
-    drop = 0;                   /* current bits to drop from code for index */
-    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
-    used = 1U << root;          /* use root table entries */
-    mask = used - 1;            /* mask for comparing low */
-
-    /* check available table space */
-    if (type == LENS && used >= ENOUGH - MAXD)
-        return 1;
-
-    /* process all codes and make table entries */
-    for (;;) {
-        /* create table entry */
-        this.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
-            this.op = (unsigned char)0;
-            this.val = work[sym];
-        }
-        else if ((int)(work[sym]) > end) {
-            this.op = (unsigned char)(extra[work[sym]]);
-            this.val = base[work[sym]];
-        }
-        else {
-            this.op = (unsigned char)(32 + 64);         /* end of block */
-            this.val = 0;
-        }
-
-        /* replicate for those indices with low len bits equal to huff */
-        incr = 1U << (len - drop);
-        fill = 1U << curr;
-        min = fill;                 /* save offset to next table */
-        do {
-            fill -= incr;
-            next[(huff >> drop) + fill] = this;
-        } while (fill != 0);
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-
-        /* go to next symbol, update count, len */
-        sym++;
-        if (--(count[len]) == 0) {
-            if (len == max) break;
-            len = lens[work[sym]];
-        }
-
-        /* create new sub-table if needed */
-        if (len > root && (huff & mask) != low) {
-            /* if first time, transition to sub-tables */
-            if (drop == 0)
-                drop = root;
-
-            /* increment past last table */
-            next += min;            /* here min is 1 << curr */
-
-            /* determine length of next table */
-            curr = len - drop;
-            left = (int)(1 << curr);
-            while (curr + drop < max) {
-                left -= count[curr + drop];
-                if (left <= 0) break;
-                curr++;
-                left <<= 1;
-            }
-
-            /* check for enough space */
-            used += 1U << curr;
-            if (type == LENS && used >= ENOUGH - MAXD)
-                return 1;
-
-            /* point entry in root table to sub-table */
-            low = huff & mask;
-            (*table)[low].op = (unsigned char)curr;
-            (*table)[low].bits = (unsigned char)root;
-            (*table)[low].val = (unsigned short)(next - *table);
-        }
-    }
-
-    /*
-       Fill in rest of table for incomplete codes.  This loop is similar to the
-       loop above in incrementing huff for table indices.  It is assumed that
-       len is equal to curr + drop, so there is no loop needed to increment
-       through high index bits.  When the current sub-table is filled, the loop
-       drops back to the root table to fill in any remaining entries there.
-     */
-    this.op = (unsigned char)64;                /* invalid code marker */
-    this.bits = (unsigned char)(len - drop);
-    this.val = (unsigned short)0;
-    while (huff != 0) {
-        /* when done with sub-table, drop back to root table */
-        if (drop != 0 && (huff & mask) != low) {
-            drop = 0;
-            len = root;
-            next = *table;
-            this.bits = (unsigned char)len;
-        }
-
-        /* put invalid code marker in table */
-        next[huff >> drop] = this;
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
-    }
-
-    /* set return parameters */
-    *table += used;
-    *bits = root;
-    return 0;
-}
diff --git a/qemu/roms/u-boot/lib/zlib/inftrees.h b/qemu/roms/u-boot/lib/zlib/inftrees.h
deleted file mode 100644
index b1104c87e..000000000
--- a/qemu/roms/u-boot/lib/zlib/inftrees.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Structure for decoding tables.  Each entry provides either the
-   information needed to do the operation requested by the code that
-   indexed that table entry, or it provides a pointer to another
-   table that indexes more bits of the code.  op indicates whether
-   the entry is a pointer to another table, a literal, a length or
-   distance, an end-of-block, or an invalid code.  For a table
-   pointer, the low four bits of op is the number of index bits of
-   that table.  For a length or distance, the low four bits of op
-   is the number of extra bits to get after the code.  bits is
-   the number of bits in this code or part of the code to drop off
-   of the bit buffer.  val is the actual byte to output in the case
-   of a literal, the base length or distance, or the offset from
-   the current table to the next table.  Each entry is four bytes. */
-typedef struct {
-    unsigned char op;           /* operation, extra bits, table bits */
-    unsigned char bits;         /* bits in this part of the code */
-    unsigned short val;         /* offset in table or code value */
-} code;
-
-/* op values as set by inflate_table():
-    00000000 - literal
-    0000tttt - table link, tttt != 0 is the number of table index bits
-    0001eeee - length or distance, eeee is the number of extra bits
-    01100000 - end of block
-    01000000 - invalid code
- */
-
-/* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1444 code structures (852 for length/literals
-   and 592 for distances, the latter actually the result of an
-   exhaustive search).  The true maximum is not known, but the value
-   below is more than safe. */
-#define ENOUGH 2048
-#define MAXD 592
-
-/* Type of code to build for inftable() */
-typedef enum {
-    CODES,
-    LENS,
-    DISTS
-} codetype;
-
-extern int inflate_table OF((codetype type, unsigned short FAR *lens,
-                             unsigned codes, code FAR * FAR *table,
-                             unsigned FAR *bits, unsigned short FAR *work));
diff --git a/qemu/roms/u-boot/lib/zlib/trees.c b/qemu/roms/u-boot/lib/zlib/trees.c
deleted file mode 100644
index a0078d08e..000000000
--- a/qemu/roms/u-boot/lib/zlib/trees.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2010 Jean-loup Gailly
- * detect_data_type() function provided freely by Cosmin Truta, 2006
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* @(#) $Id$ */
-
-/* #define GEN_TREES_H */
-
-#include "deflate.h"
-
-#ifdef DEBUG
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local const int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local const uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-/* non ANSI compilers may not accept trees.h */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-uch _dist_code[DIST_CODE_LEN];
-/* Distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-uch _length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-#else
-#  include "trees.h"
-#endif /* GEN_TREES_H */
-
-struct static_tree_desc_s {
-    const ct_data *static_tree;  /* static tree or NULL */
-    const intf *extra_bits;      /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local int  detect_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
-#endif
-
-#ifndef DEBUG
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG */
-#  define send_code(s, c, tree) \
-     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= (ush)value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (ush)val << s->bi_valid;\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (ush)(value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG */
-
-
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- */
-local void tr_static_init()
-{
-#if defined(GEN_TREES_H) || !defined(STDC)
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* For some embedded targets, global variables are not initialized: */
-#ifdef NO_INIT_GLOBAL_POINTERS
-    static_l_desc.static_tree = static_ltree;
-    static_l_desc.extra_bits = extra_lbits;
-    static_d_desc.static_tree = static_dtree;
-    static_d_desc.extra_bits = extra_dbits;
-    static_bl_desc.extra_bits = extra_blbits;
-#endif
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            _length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    _length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            _dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            _dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-
-#  ifdef GEN_TREES_H
-    gen_trees_header();
-#  endif
-#endif /* defined(GEN_TREES_H) || !defined(STDC) */
-}
-
-/* ===========================================================================
- * Genererate the file trees.h describing the static trees.
- */
-#ifdef GEN_TREES_H
-#  ifndef DEBUG
-#    include <stdio.h>
-#  endif
-
-#  define SEPARATOR(i, last, width) \
-      ((i) == (last)? "\n};\n\n" :    \
-       ((i) % (width) == (width)-1 ? ",\n" : ", "))
-
-void gen_trees_header()
-{
-    FILE *header = fopen("trees.h", "w");
-    int i;
-
-    Assert (header != NULL, "Can't open trees.h");
-    fprintf(header,
-            "/* header created automatically with -DGEN_TREES_H */\n\n");
-
-    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
-    for (i = 0; i < L_CODES+2; i++) {
-        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
-                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
-    }
-
-    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
-                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
-    }
-
-    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
-    for (i = 0; i < DIST_CODE_LEN; i++) {
-        fprintf(header, "%2u%s", _dist_code[i],
-                SEPARATOR(i, DIST_CODE_LEN-1, 20));
-    }
-
-    fprintf(header,
-        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
-    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
-        fprintf(header, "%2u%s", _length_code[i],
-                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
-    }
-
-    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
-    for (i = 0; i < LENGTH_CODES; i++) {
-        fprintf(header, "%1u%s", base_length[i],
-                SEPARATOR(i, LENGTH_CODES-1, 20));
-    }
-
-    fprintf(header, "local const int base_dist[D_CODES] = {\n");
-    for (i = 0; i < D_CODES; i++) {
-        fprintf(header, "%5u%s", base_dist[i],
-                SEPARATOR(i, D_CODES-1, 10));
-    }
-
-    fclose(header);
-}
-#endif /* GEN_TREES_H */
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void ZLIB_INTERNAL _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG
-    s->compressed_len = 0L;
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree        = desc->dyn_tree;
-    int max_code         = desc->max_code;
-    const ct_data *stree = desc->stat_desc->static_tree;
-    const intf *extra    = desc->stat_desc->extra_bits;
-    int base             = desc->stat_desc->extra_base;
-    int max_length       = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if ((unsigned) tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree         = desc->dyn_tree;
-    const ct_data *stree  = desc->stat_desc->static_tree;
-    int elems             = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
-                                s->depth[n] : s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
-#ifdef DEBUG
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-#endif
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void ZLIB_INTERNAL _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-#endif
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
-        s->compressed_len += 10L;
-#endif
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
- */
-void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int last;         /* one if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-        /* Check if the file is binary or text */
-        if (s->strm->data_type == Z_UNKNOWN)
-            s->strm->data_type = detect_data_type(s);
-
-        /* Construct the literal and distance trees */
-        build_tree(s, (tree_desc *)(&(s->l_desc)));
-        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-
-        build_tree(s, (tree_desc *)(&(s->d_desc)));
-        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-                s->static_len));
-        /* At this point, opt_len and static_len are the total bit lengths of
-         * the compressed block data, excluding the tree representations.
-         */
-
-        /* Build the bit length tree for the above two trees, and get the index
-         * in bl_order of the last bit length code to send.
-         */
-        max_blindex = build_bl_tree(s);
-
-        /* Determine the best encoding. Compute the block lengths in bytes. */
-        opt_lenb = (s->opt_len+3+7)>>3;
-        static_lenb = (s->static_len+3+7)>>3;
-
-        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-                s->last_lit));
-
-        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, last);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+last, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-#ifdef DEBUG
-        s->compressed_len += 3 + s->static_len;
-#endif
-    } else {
-        send_bits(s, (DYN_TREES<<1)+last, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-#ifdef DEBUG
-        s->compressed_len += 3 + s->opt_len;
-#endif
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    /* The above check is made mod 2^32, for files larger than 512 MB
-     * and uLong implemented on 32 bits.
-     */
-    init_block(s);
-
-    if (last) {
-        bi_windup(s);
-#ifdef DEBUG
-        s->compressed_len += 7;  /* align on byte boundary */
-#endif
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*last));
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int ZLIB_INTERNAL _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-#ifdef TRUNCATE_BLOCK
-    /* Try to guess if it is profitable to stop the current block here */
-    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-#endif
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = _length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
-               "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Check if the data type is TEXT or BINARY, using the following algorithm:
- * - TEXT if the two conditions below are satisfied:
- *    a) There are no non-portable control characters belonging to the
- *       "black list" (0..6, 14..25, 28..31).
- *    b) There is at least one printable character belonging to the
- *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
- * - BINARY otherwise.
- * - The following partially-portable control characters form a
- *   "gray list" that is ignored in this detection algorithm:
- *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
- * IN assertion: the fields Freq of dyn_ltree are set.
- */
-local int detect_data_type(s)
-    deflate_state *s;
-{
-    /* black_mask is the bit mask of black-listed bytes
-     * set bits 0..6, 14..25, and 28..31
-     * 0xf3ffc07f = binary 11110011111111111100000001111111
-     */
-    unsigned long black_mask = 0xf3ffc07fUL;
-    int n;
-
-    /* Check for non-textual ("black-listed") bytes. */
-    for (n = 0; n <= 31; n++, black_mask >>= 1)
-        if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
-            return Z_BINARY;
-
-    /* Check for textual ("white-listed") bytes. */
-    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
-            || s->dyn_ltree[13].Freq != 0)
-        return Z_TEXT;
-    for (n = 32; n < LITERALS; n++)
-        if (s->dyn_ltree[n].Freq != 0)
-            return Z_TEXT;
-
-    /* There are no "black-listed" or "white-listed" bytes:
-     * this stream either is empty or has tolerated ("gray-listed") bytes only.
-     */
-    return Z_BINARY;
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(value, len)
-    unsigned value; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= value & 1;
-        value >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);
-        put_short(s, (ush)~len);
-#ifdef DEBUG
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
diff --git a/qemu/roms/u-boot/lib/zlib/trees.h b/qemu/roms/u-boot/lib/zlib/trees.h
deleted file mode 100644
index 45a749f0c..000000000
--- a/qemu/roms/u-boot/lib/zlib/trees.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* header created automatically with -DGEN_TREES_H */
-
-local const ct_data static_ltree[L_CODES+2] = {
-{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
-{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
-{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
-{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
-{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
-{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
-{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
-{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
-{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
-{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
-{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
-{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
-{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
-{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
-{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
-{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
-{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
-{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
-{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
-{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
-{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
-{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
-{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
-{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
-{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
-{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
-{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
-{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
-{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
-{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
-{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
-{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
-{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
-{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
-{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
-{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
-{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
-{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
-{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
-{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
-{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
-{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
-{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
-{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
-{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
-{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
-{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
-{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
-{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
-{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
-{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
-{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
-{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
-{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
-{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
-{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
-{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
-{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
-};
-
-local const ct_data static_dtree[D_CODES] = {
-{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
-{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
-{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
-{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
-{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
-{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
-};
-
-const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
- 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
- 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
-10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
-11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
-18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
-};
-
-const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
- 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
-13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
-19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
-22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
-};
-
-local const int base_length[LENGTH_CODES] = {
-0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
-64, 80, 96, 112, 128, 160, 192, 224, 0
-};
-
-local const int base_dist[D_CODES] = {
-    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
-   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
- 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
-};
diff --git a/qemu/roms/u-boot/lib/zlib/zlib.c b/qemu/roms/u-boot/lib/zlib/zlib.c
deleted file mode 100644
index 7e1570292..000000000
--- a/qemu/roms/u-boot/lib/zlib/zlib.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-1.2.3
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- */
-
-#include <common.h>
-
-#ifdef CONFIG_GZIP_COMPRESSED
-#define NO_DUMMY_DECL
-#include "deflate.c"
-#include "trees.c"
-#endif
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-#include "inffixed.h"
-#include "inffast.c"
-#include "inftrees.c"
-#include "inflate.c"
-#include "zutil.c"
-#include "adler32.c"
diff --git a/qemu/roms/u-boot/lib/zlib/zlib.h b/qemu/roms/u-boot/lib/zlib/zlib.h
deleted file mode 100644
index 556be3275..000000000
--- a/qemu/roms/u-boot/lib/zlib/zlib.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Glue between u-boot and upstream zlib */
-#ifndef __GLUE_ZLIB_H__
-#define __GLUE_ZLIB_H__
-
-#include <common.h>
-#include <compiler.h>
-#include <asm/unaligned.h>
-#include <watchdog.h>
-#include "u-boot/zlib.h"
-
-/* avoid conflicts */
-#undef OFF
-#undef ASMINF
-#undef POSTINC
-#undef NO_GZIP
-#define GUNZIP
-#undef STDC
-#undef NO_ERRNO_H
-
-#endif
diff --git a/qemu/roms/u-boot/lib/zlib/zutil.c b/qemu/roms/u-boot/lib/zlib/zutil.c
deleted file mode 100644
index 14f6eb1e0..000000000
--- a/qemu/roms/u-boot/lib/zlib/zutil.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-const char * const z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-#ifdef DEBUG
-
-#ifndef verbose
-#define verbose 0
-#endif
-int z_verbose = verbose;
-
-void z_error (m)
-    char *m;
-{
-	fprintf(stderr, "%s\n", m);
-	hang ();
-}
-#endif
-
-/* exported to allow conversion of error code to string for compress() and
- * uncompress()
- */
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp    malloc OF((uInt size));
-extern voidp    calloc OF((uInt items, uInt size));
-extern void     free   OF((voidpf ptr));
-#endif
-
-voidpf zcalloc(voidpf opaque, unsigned items, unsigned size)
-{
-	if (opaque)
-		items += size - size; /* make compiler happy */
-	return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
-		(voidpf)calloc(items, size);
-}
-
-void  zcfree(voidpf opaque, voidpf ptr, unsigned nb)
-{
-	free(ptr);
-	if (opaque)
-		return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
diff --git a/qemu/roms/u-boot/lib/zlib/zutil.h b/qemu/roms/u-boot/lib/zlib/zutil.h
deleted file mode 100644
index 7e05c3b56..000000000
--- a/qemu/roms/u-boot/lib/zlib/zutil.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZUTIL_H
-#define ZUTIL_H
-
-#define ZLIB_INTERNAL
-#include "zlib.h"
-
-#ifdef STDC
-#  ifndef _WIN32_WCE
-#    include <stddef.h>
-#  endif
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
-#   ifdef _WIN32_WCE
-      /* The Microsoft C Run-Time Library for Windows CE doesn't have
-       * errno.  We define it as a global variable to simplify porting.
-       * Its value is always 0 and should not be used.  We rename it to
-       * avoid conflict with other libraries that use the same workaround.
-       */
-#     define errno z_errno
-#   endif
-    extern int errno;
-#else
-#  ifndef _WIN32_WCE
-#    include <errno.h>
-#  endif
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-	 /* functions */
-#ifdef CONFIG_GZIP_COMPRESSED
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-#include <linux/string.h>
-#define zmemcpy memcpy
-#define zmemcmp memcmp
-#define zmemzero(dest, len) memset(dest, 0, len)
-
-/* Diagnostic functions */
-#ifdef DEBUG
-/* Not valid for U-boot
-#  include <stdio.h> */
-   extern int z_verbose;
-   extern void z_error    OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
-#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
-#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void   zcfree  OF((voidpf opaque, voidpf ptr, unsigned size));
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0)
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* ZUTIL_H */