Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 153 deletions

diff --git a/qemu/roms/u-boot/include/nios2-io.h b/qemu/roms/u-boot/include/nios2-io.h
deleted file mode 100644
index 6f1ae5031..000000000
--- a/qemu/roms/u-boot/include/nios2-io.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*************************************************************************
- * Altera Nios2 Standard Peripherals
- ************************************************************************/
-
-#ifndef __NIOS2IO_H__
-#define __NIOS2IO_H__
-
-/*------------------------------------------------------------------------
- * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_uart_t {
-	unsigned	rxdata;		/* Rx data reg */
-	unsigned	txdata;		/* Tx data reg */
-	unsigned	status;		/* Status reg */
-	unsigned	control;	/* Control reg */
-	unsigned	divisor;	/* Baud rate divisor reg */
-	unsigned	endofpacket;	/* End-of-packet reg */
-}nios_uart_t;
-
-/* status register */
-#define NIOS_UART_PE		(1 << 0)	/* parity error */
-#define NIOS_UART_FE		(1 << 1)	/* frame error */
-#define NIOS_UART_BRK		(1 << 2)	/* break detect */
-#define NIOS_UART_ROE		(1 << 3)	/* rx overrun */
-#define NIOS_UART_TOE		(1 << 4)	/* tx overrun */
-#define NIOS_UART_TMT		(1 << 5)	/* tx empty */
-#define NIOS_UART_TRDY		(1 << 6)	/* tx ready */
-#define NIOS_UART_RRDY		(1 << 7)	/* rx ready */
-#define NIOS_UART_E		(1 << 8)	/* exception */
-#define NIOS_UART_DCTS		(1 << 10)	/* cts change */
-#define NIOS_UART_CTS		(1 << 11)	/* cts */
-#define NIOS_UART_EOP		(1 << 12)	/* eop detected */
-
-/* control register */
-#define NIOS_UART_IPE		(1 << 0)	/* parity error int ena*/
-#define NIOS_UART_IFE		(1 << 1)	/* frame error int ena */
-#define NIOS_UART_IBRK		(1 << 2)	/* break detect int ena */
-#define NIOS_UART_IROE		(1 << 3)	/* rx overrun int ena */
-#define NIOS_UART_ITOE		(1 << 4)	/* tx overrun int ena */
-#define NIOS_UART_ITMT		(1 << 5)	/* tx empty int ena */
-#define NIOS_UART_ITRDY		(1 << 6)	/* tx ready int ena */
-#define NIOS_UART_IRRDY		(1 << 7)	/* rx ready int ena */
-#define NIOS_UART_IE		(1 << 8)	/* exception int ena */
-#define NIOS_UART_TBRK		(1 << 9)	/* transmit break */
-#define NIOS_UART_IDCTS		(1 << 10)	/* cts change int ena */
-#define NIOS_UART_RTS		(1 << 11)	/* rts */
-#define NIOS_UART_IEOP		(1 << 12)	/* eop detected int ena */
-
-
-/*------------------------------------------------------------------------
- * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_timer_t {
-	unsigned	status;			/* Timer status reg */
-	unsigned	control;		/* Timer control reg */
-	unsigned	periodl;		/* Timeout period low */
-	unsigned	periodh;		/* Timeout period high */
-	unsigned	snapl;			/* Snapshot low */
-	unsigned	snaph;			/* Snapshot high */
-}nios_timer_t;
-
-/* status register */
-#define NIOS_TIMER_TO		(1 << 0)	/* Timeout */
-#define NIOS_TIMER_RUN		(1 << 1)	/* Timer running */
-
-/* control register */
-#define NIOS_TIMER_ITO		(1 << 0)	/* Timeout int ena */
-#define NIOS_TIMER_CONT		(1 << 1)	/* Continuous mode */
-#define NIOS_TIMER_START	(1 << 2)	/* Start timer */
-#define NIOS_TIMER_STOP		(1 << 3)	/* Stop timer */
-
-
-/*------------------------------------------------------------------------
- * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_pio_t {
-	unsigned int	data;		/* Data value at each PIO in/out */
-	unsigned int	direction;	/* Data direct. for each PIO bit */
-	unsigned int	interruptmask;	/* Per-bit IRQ enable/disable */
-	unsigned int	edgecapture;	/* Per-bit sync. edge detect & hold */
-}nios_pio_t;
-
-/* direction register */
-#define NIOS_PIO_OUT		(1)		/* PIO bit is output */
-#define NIOS_PIO_IN		(0)		/* PIO bit is input */
-
-
-/*------------------------------------------------------------------------
- * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_spi_t {
-	unsigned	rxdata;		/* Rx data reg */
-	unsigned	txdata;		/* Tx data reg */
-	unsigned	status;		/* Status reg */
-	unsigned	control;	/* Control reg */
-	unsigned	reserved;	/* (master only) */
-	unsigned	slaveselect;	/* SPI slave select mask (master only) */
-}nios_spi_t;
-
-/* status register */
-#define NIOS_SPI_ROE		(1 << 3)	/* rx overrun */
-#define NIOS_SPI_TOE		(1 << 4)	/* tx overrun */
-#define NIOS_SPI_TMT		(1 << 5)	/* tx empty */
-#define NIOS_SPI_TRDY		(1 << 6)	/* tx ready */
-#define NIOS_SPI_RRDY		(1 << 7)	/* rx ready */
-#define NIOS_SPI_E		(1 << 8)	/* exception */
-
-/* control register */
-#define NIOS_SPI_IROE		(1 << 3)	/* rx overrun int ena */
-#define NIOS_SPI_ITOE		(1 << 4)	/* tx overrun int ena */
-#define NIOS_SPI_ITRDY		(1 << 6)	/* tx ready int ena */
-#define NIOS_SPI_IRRDY		(1 << 7)	/* rx ready int ena */
-#define NIOS_SPI_IE		(1 << 8)	/* exception int ena */
-#define NIOS_SPI_SSO		(1 << 10)	/* override SS_n output */
-
-/*------------------------------------------------------------------------
- * JTAG UART
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_jtag_t {
-	unsigned	data;			/* Data register */
-	unsigned	control;		/* Control register */
-}nios_jtag_t;
-
-/* data register */
-#define NIOS_JTAG_RVALID	(1<<15)		/* Read valid */
-#define NIOS_JTAG_DATA(d)	((d)&0x0ff)	/* Read data */
-#define NIOS_JTAG_RAVAIL(d)	((d)>>16)	/* Read space avail */
-
-/* control register */
-#define NIOS_JTAG_RE		(1 << 0)	/* read intr enable */
-#define NIOS_JTAG_WE		(1 << 1)	/* write intr enable */
-#define NIOS_JTAG_RI		(1 << 8)	/* read intr pending */
-#define NIOS_JTAG_WI		(1 << 9)	/* write intr pending*/
-#define NIOS_JTAG_AC		(1 << 10)	/* activity indicator */
-#define NIOS_JTAG_RRDY		(1 << 12)	/* read available */
-#define NIOS_JTAG_WSPACE(d)	((d)>>16)	/* Write space avail */
-
-/*------------------------------------------------------------------------
- * SYSTEM ID
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_sysid_t {
-	unsigned	id;			/* The system build id*/
-	unsigned	timestamp;		/* Timestamp */
-}nios_sysid_t;
-
-#endif /* __NIOS2IO_H__ */