Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 90 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/mpc86xx.h b/qemu/roms/u-boot/include/mpc86xx.h
new file mode 100644
index 000000000..9fe474803
--- /dev/null
+++ b/qemu/roms/u-boot/include/mpc86xx.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ * Jeffrey Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ */
+
+#ifndef	__MPC86xx_H__
+#define __MPC86xx_H__
+
+#include <asm/fsl_lbc.h>
+
+#define EXC_OFF_SYS_RESET	0x0100	/* System reset	offset */
+#define _START_OFFSET		EXC_OFF_SYS_RESET
+
+/*
+ * platform register addresses
+ */
+
+#define GUTS_SVR	(CONFIG_SYS_CCSRBAR + 0xE00A4)
+#define MCM_ABCR	(CONFIG_SYS_CCSRBAR + 0x01000)
+#define MCM_DBCR	(CONFIG_SYS_CCSRBAR + 0x01008)
+
+/*
+ * l2cr values.  Look in config_<BOARD>.h for the actual setup
+ */
+#define l2cr		 1017
+
+#define L2CR_L2E         0x80000000 /* bit 0 - enable */
+#define L2CR_L2PE        0x40000000 /* bit 1 - data parity */
+#define L2CR_L2I         0x00200000 /* bit 10 - global invalidate bit */
+#define L2CR_L2CTL       0x00100000 /* bit 11 - l2 ram control */
+#define L2CR_L2DO        0x00010000 /* bit 15 - data-only mode */
+#define L2CR_REP         0x00001000 /* bit 19 - l2 replacement alg */
+#define L2CR_HWF         0x00000800 /* bit 20 - hardware flush */
+#define L2CR_L2IP        0x00000001 /* global invalidate in progress */
+
+#define HID0_XBSEN              0x00000100
+#define HID0_HIGH_BAT_EN        0x00800000
+#define HID0_XAEN               0x00020000
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long freq_processor;
+	unsigned long freq_systembus;
+	unsigned long freq_localbus;
+} MPC86xx_SYS_INFO;
+
+#define l1icache_enable	icache_enable
+
+void l2cache_enable(void);
+void l1dcache_enable(void);
+
+static __inline__ unsigned long get_hid0 (void)
+{
+	unsigned long hid0;
+	asm volatile("mfspr %0, 1008" : "=r" (hid0) :);
+	return hid0;
+}
+
+static __inline__ unsigned long get_hid1 (void)
+{
+	unsigned long hid1;
+	asm volatile("mfspr %0, 1009" : "=r" (hid1) :);
+	return hid1;
+}
+
+static __inline__ void set_hid0 (unsigned long hid0)
+{
+	asm volatile("mtspr 1008, %0" : : "r" (hid0));
+}
+
+static __inline__ void set_hid1 (unsigned long hid1)
+{
+	asm volatile("mtspr 1009, %0" : : "r" (hid1));
+}
+
+
+static __inline__ unsigned long get_l2cr (void)
+{
+   unsigned long l2cr_val;
+   asm volatile("mfspr %0, 1017" : "=r" (l2cr_val) :);
+   return l2cr_val;
+}
+
+void setup_ddr_bat(phys_addr_t dram_size);
+extern void setup_bats(void);
+
+#endif  /* _ASMLANGUAGE */
+#endif	/* __MPC86xx_H__ */