Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 725 deletions

diff --git a/qemu/roms/u-boot/include/linux/ethtool.h b/qemu/roms/u-boot/include/linux/ethtool.h
deleted file mode 100644
index f6dbdb096..000000000
--- a/qemu/roms/u-boot/include/linux/ethtool.h
+++ /dev/null
@@ -1,725 +0,0 @@
-/*
- * ethtool.h: Defines for Linux ethtool.
- *
- * Copyright (C) 1998 David S. Miller (davem@redhat.com)
- * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
- * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
- * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
- *                                christopher.leech@intel.com,
- *                                scott.feldman@intel.com)
- * Portions Copyright (C) Sun Microsystems 2008
- */
-
-#ifndef _LINUX_ETHTOOL_H
-#define _LINUX_ETHTOOL_H
-
-#include <linux/types.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
-	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;
-	__u8	eth_tp_mdix;
-	__u8	reserved2;
-	__u32	lp_advertising;	/* Features the link partner advertises */
-	__u32	reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-						__u32 speed)
-{
-
-	ep->speed = (__u16)speed;
-	ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
-{
-	return (ep->speed_hi << 16) | ep->speed;
-}
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
-	char	reserved1[32];
-	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
-	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX	6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
-	__u32	cmd;
-	__u32	supported;
-	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
-	__u32	cmd;
-	__u32	data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
-	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
-	__u8	data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
-	__u32	cmd;
-	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
-	__u8	data[0];
-};
-
-/* for configuring coalescing parameters of chip */
-struct ethtool_coalesce {
-	__u32	cmd;	/* ETHTOOL_{G,S}COALESCE */
-
-	/* How many usecs to delay an RX interrupt after
-	 * a packet arrives.  If 0, only rx_max_coalesced_frames
-	 * is used.
-	 */
-	__u32	rx_coalesce_usecs;
-
-	/* How many packets to delay an RX interrupt after
-	 * a packet arrives.  If 0, only rx_coalesce_usecs is
-	 * used.  It is illegal to set both usecs and max frames
-	 * to zero as this would cause RX interrupts to never be
-	 * generated.
-	 */
-	__u32	rx_max_coalesced_frames;
-
-	/* Same as above two parameters, except that these values
-	 * apply while an IRQ is being serviced by the host.  Not
-	 * all cards support this feature and the values are ignored
-	 * in that case.
-	 */
-	__u32	rx_coalesce_usecs_irq;
-	__u32	rx_max_coalesced_frames_irq;
-
-	/* How many usecs to delay a TX interrupt after
-	 * a packet is sent.  If 0, only tx_max_coalesced_frames
-	 * is used.
-	 */
-	__u32	tx_coalesce_usecs;
-
-	/* How many packets to delay a TX interrupt after
-	 * a packet is sent.  If 0, only tx_coalesce_usecs is
-	 * used.  It is illegal to set both usecs and max frames
-	 * to zero as this would cause TX interrupts to never be
-	 * generated.
-	 */
-	__u32	tx_max_coalesced_frames;
-
-	/* Same as above two parameters, except that these values
-	 * apply while an IRQ is being serviced by the host.  Not
-	 * all cards support this feature and the values are ignored
-	 * in that case.
-	 */
-	__u32	tx_coalesce_usecs_irq;
-	__u32	tx_max_coalesced_frames_irq;
-
-	/* How many usecs to delay in-memory statistics
-	 * block updates.  Some drivers do not have an in-memory
-	 * statistic block, and in such cases this value is ignored.
-	 * This value must not be zero.
-	 */
-	__u32	stats_block_coalesce_usecs;
-
-	/* Adaptive RX/TX coalescing is an algorithm implemented by
-	 * some drivers to improve latency under low packet rates and
-	 * improve throughput under high packet rates.  Some drivers
-	 * only implement one of RX or TX adaptive coalescing.  Anything
-	 * not implemented by the driver causes these values to be
-	 * silently ignored.
-	 */
-	__u32	use_adaptive_rx_coalesce;
-	__u32	use_adaptive_tx_coalesce;
-
-	/* When the packet rate (measured in packets per second)
-	 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
-	 * used.
-	 */
-	__u32	pkt_rate_low;
-	__u32	rx_coalesce_usecs_low;
-	__u32	rx_max_coalesced_frames_low;
-	__u32	tx_coalesce_usecs_low;
-	__u32	tx_max_coalesced_frames_low;
-
-	/* When the packet rate is below pkt_rate_high but above
-	 * pkt_rate_low (both measured in packets per second) the
-	 * normal {rx,tx}_* coalescing parameters are used.
-	 */
-
-	/* When the packet rate is (measured in packets per second)
-	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
-	 * used.
-	 */
-	__u32	pkt_rate_high;
-	__u32	rx_coalesce_usecs_high;
-	__u32	rx_max_coalesced_frames_high;
-	__u32	tx_coalesce_usecs_high;
-	__u32	tx_max_coalesced_frames_high;
-
-	/* How often to do adaptive coalescing packet rate sampling,
-	 * measured in seconds.  Must not be zero.
-	 */
-	__u32	rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
-	__u32	rx_max_pending;
-	__u32	rx_mini_max_pending;
-	__u32	rx_jumbo_max_pending;
-	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
-	__u32	rx_pending;
-	__u32	rx_mini_pending;
-	__u32	rx_jumbo_pending;
-	__u32	tx_pending;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autonet' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
-	__u32	autoneg;
-	__u32	rx_pause;
-	__u32	tx_pause;
-};
-
-#define ETH_GSTRING_LEN		32
-enum ethtool_stringset {
-	ETH_SS_TEST		= 0,
-	ETH_SS_STATS,
-	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,
-	ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
-	__u32	cmd;		/* ETHTOOL_GSTRINGS */
-	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
-	__u32	len;		/* number of strings in the string set */
-	__u8	data[0];
-};
-
-struct ethtool_sset_info {
-	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
-	__u32	reserved;
-	__u64	sset_mask;	/* input: each bit selects an sset to query */
-				/* output: each bit a returned sset */
-	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
-				   in sset_mask.  One bit implies one
-				   __u32, two bits implies two
-				   __u32's, etc. */
-};
-
-enum ethtool_test_flags {
-	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
-	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
-	__u32	cmd;		/* ETHTOOL_TEST */
-	__u32	flags;		/* ETH_TEST_FL_xxx */
-	__u32	reserved;
-	__u32	len;		/* result length, in number of u64 elements */
-	__u64	data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
-	__u32	cmd;		/* ETHTOOL_GSTATS */
-	__u32	n_stats;	/* number of u64's being returned */
-	__u64	data[0];
-};
-
-struct ethtool_perm_addr {
-	__u32	cmd;		/* ETHTOOL_GPERMADDR */
-	__u32	size;
-	__u8	data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present.  When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
-	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
-	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
-	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
-	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
-	ETH_FLAG_RXHASH		= (1 << 28),
-};
-
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be16	psrc;
-	__be16	pdst;
-	__u8    tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	spi;
-	__u8    tos;
-};
-
-#define	ETH_RX_NFC_IP4	1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	l4_4_bytes;
-	__u8    tos;
-	__u8    ip_ver;
-	__u8    proto;
-};
-
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer.  On return from
- *	%ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
- * @ring_index: RX ring/queue index for each hash value
- */
-struct ethtool_rxfh_indir {
-	__u32	cmd;
-	__u32	size;
-	__u32	ring_index[0];
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME	128
-enum ethtool_flash_op_type {
-	ETHTOOL_FLASH_ALL_REGIONS	= 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
-	__u32	cmd;
-	__u32	region;
-	char	data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
-	__u32	available;
-	__u32	requested;
-	__u32	active;
-	__u32	never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- *       out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
-	__u32	valid;
-	__u32	requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_set_features_block features[0];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- *	those bits were ignored.
- *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- *      resulting state of bits masked by .valid is not equal to .requested.
- *      Probably there are other device-specific constraints on some features
- *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- *      here as though ignored bits were cleared.
- *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- *      compatibility functions. Requested offload state cannot be properly
- *      managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
-	ETHTOOL_F_UNSUPPORTED__BIT,
-	ETHTOOL_F_WISH__BIT,
-	ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET		0x00000001 /* Get settings. */
-#define ETHTOOL_SSET		0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK		0x0000000a
-#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
-					    * (ethtool_value) */
-#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
-					    * (ethtool_value). */
-#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
-#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET		ETHTOOL_GSET
-#define SPARC_ETH_SSET		ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-#define SUPPORTED_Pause			(1 << 13)
-#define SUPPORTED_Asym_Pause		(1 << 14)
-#define SUPPORTED_2500baseX_Full	(1 << 15)
-#define SUPPORTED_Backplane		(1 << 16)
-#define SUPPORTED_1000baseKX_Full	(1 << 17)
-#define SUPPORTED_10000baseKX4_Full	(1 << 18)
-#define SUPPORTED_10000baseKR_Full	(1 << 19)
-#define SUPPORTED_10000baseR_FEC	(1 << 20)
-#define SUPPORTED_1000baseX_Half	(1 << 21)
-#define SUPPORTED_1000baseX_Full	(1 << 22)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-#define ADVERTISED_Pause		(1 << 13)
-#define ADVERTISED_Asym_Pause		(1 << 14)
-#define ADVERTISED_2500baseX_Full	(1 << 15)
-#define ADVERTISED_Backplane		(1 << 16)
-#define ADVERTISED_1000baseKX_Full	(1 << 17)
-#define ADVERTISED_10000baseKX4_Full	(1 << 18)
-#define ADVERTISED_10000baseKR_Full	(1 << 19)
-#define ADVERTISED_10000baseR_FEC	(1 << 20)
-#define ADVERTISED_1000baseX_Half	(1 << 21)
-#define ADVERTISED_1000baseX_Full	(1 << 22)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things.  When getting the
- * devices settings, these indicate the current mode and whether
- * it was foced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10		10
-#define SPEED_100		100
-#define SPEED_1000		1000
-#define SPEED_2500		2500
-#define SPEED_10000		10000
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF		0x00
-#define DUPLEX_FULL		0x01
-
-/* Which connector port. */
-#define PORT_TP			0x00
-#define PORT_AUI		0x01
-#define PORT_MII		0x02
-#define PORT_FIBRE		0x03
-#define PORT_BNC		0x04
-#define PORT_DA			0x05
-#define PORT_NONE		0xef
-#define PORT_OTHER		0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL		0x00
-#define XCVR_EXTERNAL		0x01
-#define XCVR_DUMMY1		0x02
-#define XCVR_DUMMY2		0x03
-#define XCVR_DUMMY3		0x04
-
-/* Enable or disable autonegotiation.  If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE		0x00
-#define AUTONEG_ENABLE		0x01
-
-/* Mode MDI or MDI-X */
-#define ETH_TP_MDI_INVALID	0x00
-#define ETH_TP_MDI		0x01
-#define ETH_TP_MDI_X		0x02
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY		(1 << 0)
-#define WAKE_UCAST		(1 << 1)
-#define WAKE_MCAST		(1 << 2)
-#define WAKE_BCAST		(1 << 3)
-#define WAKE_ARP		(1 << 4)
-#define WAKE_MAGIC		(1 << 5)
-#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
-#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
-#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
-#define	AH_ESP_V4_FLOW	0x04	/* hash only */
-#define	TCP_V6_FLOW	0x05	/* hash only */
-#define	UDP_V6_FLOW	0x06	/* hash only */
-#define	SCTP_V6_FLOW	0x07	/* hash only */
-#define	AH_ESP_V6_FLOW	0x08	/* hash only */
-#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
-#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
-#define	AH_V6_FLOW	0x0b	/* hash only */
-#define	ESP_V6_FLOW	0x0c	/* hash only */
-#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
-#define	IPV4_FLOW	0x10	/* hash only */
-#define	IPV6_FLOW	0x11	/* hash only */
-#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
-
-/* L3-L4 network traffic flow hash options */
-#define	RXH_L2DA	(1 << 1)
-#define	RXH_VLAN	(1 << 2)
-#define	RXH_L3_PROTO	(1 << 3)
-#define	RXH_IP_SRC	(1 << 4)
-#define	RXH_IP_DST	(1 << 5)
-#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define	RXH_DISCARD	(1 << 31)
-
-#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset.  On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently.  The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
-	/* These flags represent components dedicated to the interface
-	 * the command is addressed to.  Shift any flag left by
-	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
-	 * same type.
-	 */
-	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
-	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
-	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
-	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
-	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
-	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
-	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
-	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
-						 * multiple components */
-
-	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
-						 * this interface */
-	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
-						 * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT	16
-
-#endif /* _LINUX_ETHTOOL_H */