Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 334 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/vpac270.h b/qemu/roms/u-boot/include/configs/vpac270.h
new file mode 100644
index 000000000..c6d47635b
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/vpac270.h
@@ -0,0 +1,334 @@
+/*
+ * Voipac PXA270 configuration file
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	__CONFIG_H
+#define	__CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
+#define	CONFIG_VPAC270		1	/* Voipac PXA270 board */
+#define	CONFIG_SYS_TEXT_BASE	0xa0000000
+
+#ifdef	CONFIG_ONENAND
+#define	CONFIG_SPL
+#define	CONFIG_SPL_ONENAND_SUPPORT
+#define	CONFIG_SPL_ONENAND_LOAD_ADDR	0x2000
+#define	CONFIG_SPL_ONENAND_LOAD_SIZE	\
+	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
+#define	CONFIG_SPL_TEXT_BASE	0x5c000000
+#define	CONFIG_SPL_LDSCRIPT	"board/vpac270/u-boot-spl.lds"
+#endif
+
+/*
+ * Environment settings
+ */
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
+#define	CONFIG_ARCH_CPU_INIT
+#define	CONFIG_BOOTCOMMAND						\
+	"if mmc init && fatload mmc 0 0xa4000000 uImage; then "		\
+		"bootm 0xa4000000; "					\
+	"fi; "								\
+	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
+		"bootm 0xa4000000; "					\
+	"fi; "								\
+	"if ide reset && fatload ide 0 0xa4000000 uImage; then "	\
+		"bootm 0xa4000000; "					\
+	"fi; "								\
+	"bootm 0x60000;"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"update_onenand="						\
+		"onenand erase 0x0 0x80000 ; "				\
+		"onenand write 0xa0000000 0x0 0x80000"
+
+#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
+#define	CONFIG_TIMESTAMP
+#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+#define	CONFIG_LZMA			/* LZMA compression support */
+#define	CONFIG_OF_LIBFDT
+
+/*
+ * Serial Console Configuration
+ */
+#define	CONFIG_PXA_SERIAL
+#define	CONFIG_FFUART			1
+#define CONFIG_CONS_INDEX		3
+#define	CONFIG_BAUDRATE			115200
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#define	CONFIG_CMD_NET
+#define	CONFIG_CMD_ENV
+#undef	CONFIG_CMD_IMLS
+#define	CONFIG_CMD_MMC
+#define	CONFIG_CMD_USB
+#undef	CONFIG_LCD
+#define	CONFIG_CMD_IDE
+
+#ifdef	CONFIG_ONENAND
+#undef	CONFIG_CMD_FLASH
+#define	CONFIG_CMD_ONENAND
+#else
+#define	CONFIG_CMD_FLASH
+#undef	CONFIG_CMD_ONENAND
+#endif
+
+/*
+ * Networking Configuration
+ *  chip on the Voipac PXA270 board
+ */
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_CMD_PING
+#define	CONFIG_CMD_DHCP
+
+#define	CONFIG_DRIVER_DM9000		1
+#define	CONFIG_DM9000_BASE		0x08000300	/* CS2 */
+#define	DM9000_IO			(CONFIG_DM9000_BASE)
+#define	DM9000_DATA			(CONFIG_DM9000_BASE + 4)
+#define	CONFIG_NET_RETRY_COUNT		10
+
+#define	CONFIG_BOOTP_BOOTFILESIZE
+#define	CONFIG_BOOTP_BOOTPATH
+#define	CONFIG_BOOTP_GATEWAY
+#define	CONFIG_BOOTP_HOSTNAME
+#endif
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef	CONFIG_CMD_MMC
+#define	CONFIG_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
+#define	CONFIG_SYS_MMC_BASE		0xF0000000
+#define	CONFIG_CMD_FAT
+#define	CONFIG_CMD_EXT2
+#define	CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef	CONFIG_CMD_KGDB
+#define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define	CONFIG_SYS_HUSH_PARSER		1
+
+#define	CONFIG_SYS_LONGHELP
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT		"$ "
+#else
+#endif
+#define	CONFIG_SYS_CBSIZE		256
+#define	CONFIG_SYS_PBSIZE		\
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define	CONFIG_SYS_MAXARGS		16
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define	CONFIG_SYS_DEVICE_NULLDEV	1
+#define	CONFIG_CMDLINE_EDITING		1
+#define	CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Clock Configuration
+ */
+#define	CONFIG_SYS_CPUSPEED		0x190		/* 312MHz */
+
+
+/*
+ * DRAM Map
+ */
+#define	CONFIG_NR_DRAM_BANKS		2		/* 2 banks of DRAM */
+#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
+#define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
+
+#ifdef	CONFIG_RAM_256M
+#define	PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #2 */
+#define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
+#endif
+
+#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
+#ifdef	CONFIG_RAM_256M
+#define	CONFIG_SYS_DRAM_SIZE		0x10000000	/* 256 MB DRAM */
+#else
+#define	CONFIG_SYS_DRAM_SIZE		0x08000000	/* 128 MB DRAM */
+#endif
+
+#define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
+
+#define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
+
+/*
+ * NOR FLASH
+ */
+#define	CONFIG_SYS_MONITOR_BASE		0x0
+#define	CONFIG_SYS_MONITOR_LEN		0x80000
+#define	CONFIG_ENV_ADDR			\
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_ENV_SIZE			0x20000
+#define	CONFIG_ENV_SECT_SIZE		0x20000
+
+#if	defined(CONFIG_CMD_FLASH)	/* NOR */
+#define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
+
+#ifdef	CONFIG_RAM_256M
+#define	PHYS_FLASH_2			0x02000000	/* Flash Bank #2 */
+#endif
+
+#define	CONFIG_SYS_FLASH_CFI
+#define	CONFIG_FLASH_CFI_DRIVER		1
+
+#define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
+#ifdef	CONFIG_RAM_256M
+#define	CONFIG_SYS_MAX_FLASH_BANKS	2
+#define	CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, PHYS_FLASH_2 }
+#else
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
+#define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#endif
+
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ)
+#define	CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ)
+
+#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define	CONFIG_SYS_FLASH_PROTECTION		1
+
+#define	CONFIG_ENV_IS_IN_FLASH		1
+
+#elif	defined(CONFIG_CMD_ONENAND)	/* OneNAND */
+#define	CONFIG_SYS_NO_FLASH
+#define	CONFIG_SYS_ONENAND_BASE		0x00000000
+
+#define	CONFIG_ENV_IS_IN_ONENAND	1
+
+#else	/* No flash */
+#define	CONFIG_SYS_NO_FLASH
+#define	CONFIG_SYS_ENV_IS_NOWHERE
+#endif
+
+/*
+ * IDE
+ */
+#ifdef	CONFIG_CMD_IDE
+#define	CONFIG_LBA48
+#undef	CONFIG_IDE_LED
+#undef	CONFIG_IDE_RESET
+
+#define	__io
+
+#define	CONFIG_SYS_IDE_MAXBUS		1
+#define	CONFIG_SYS_IDE_MAXDEVICE	1
+
+#define	CONFIG_SYS_ATA_BASE_ADDR	0x0c000000
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0
+
+#define	CONFIG_SYS_ATA_DATA_OFFSET	0x120
+#define	CONFIG_SYS_ATA_REG_OFFSET	0x120
+#define	CONFIG_SYS_ATA_ALT_OFFSET	0x120
+
+#define	CONFIG_SYS_ATA_STRIDE		2
+#endif
+
+/*
+ * GPIO settings
+ */
+#define	CONFIG_SYS_GPSR0_VAL	0x01308800
+#define	CONFIG_SYS_GPSR1_VAL	0x00cf0000
+#define	CONFIG_SYS_GPSR2_VAL	0x922ac000
+#define	CONFIG_SYS_GPSR3_VAL	0x0161e800
+
+#define	CONFIG_SYS_GPCR0_VAL	0x00010000
+#define	CONFIG_SYS_GPCR1_VAL	0x0
+#define	CONFIG_SYS_GPCR2_VAL	0x0
+#define	CONFIG_SYS_GPCR3_VAL	0x0
+
+#define	CONFIG_SYS_GPDR0_VAL	0xcbb18800
+#define	CONFIG_SYS_GPDR1_VAL	0xfccfa981
+#define	CONFIG_SYS_GPDR2_VAL	0x922affff
+#define	CONFIG_SYS_GPDR3_VAL	0x0161e904
+
+#define	CONFIG_SYS_GAFR0_L_VAL	0x00100000
+#define	CONFIG_SYS_GAFR0_U_VAL	0xa5da8510
+#define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
+#define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a0aa
+#define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
+#define	CONFIG_SYS_GAFR2_U_VAL	0x4109a401
+#define	CONFIG_SYS_GAFR3_L_VAL	0x54010310
+#define	CONFIG_SYS_GAFR3_U_VAL	0x00025401
+
+#define	CONFIG_SYS_PSSR_VAL	0x30
+
+/*
+ * Clock settings
+ */
+#define	CONFIG_SYS_CKEN		0x00500240
+#define	CONFIG_SYS_CCCR		0x02000290
+
+/*
+ * Memory settings
+ */
+#define	CONFIG_SYS_MSC0_VAL	0x3ffc95f9
+#define	CONFIG_SYS_MSC1_VAL	0x02ccf974
+#define	CONFIG_SYS_MSC2_VAL	0x00000000
+#ifdef	CONFIG_RAM_256M
+#define	CONFIG_SYS_MDCNFG_VAL	0x8ad30ad3
+#else
+#define	CONFIG_SYS_MDCNFG_VAL	0x88000ad3
+#endif
+#define	CONFIG_SYS_MDREFR_VAL	0x201fe01e
+#define	CONFIG_SYS_MDMRS_VAL	0x00000000
+#define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL	0x40044004
+#define	CONFIG_SYS_MEM_BUF_IMP	0x0f
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define	CONFIG_SYS_MECR_VAL	0x00000001
+#define	CONFIG_SYS_MCMEM0_VAL	0x00014307
+#define	CONFIG_SYS_MCMEM1_VAL	0x00014307
+#define	CONFIG_SYS_MCATT0_VAL	0x0001c787
+#define	CONFIG_SYS_MCATT1_VAL	0x0001c787
+#define	CONFIG_SYS_MCIO0_VAL	0x0001430f
+#define	CONFIG_SYS_MCIO1_VAL	0x0001430f
+
+/*
+ * LCD
+ */
+#ifdef	CONFIG_LCD
+#define	CONFIG_VOIPAC_LCD
+#endif
+
+/*
+ * USB
+ */
+#ifdef	CONFIG_CMD_USB
+#define	CONFIG_USB_OHCI_NEW
+#define	CONFIG_SYS_USB_OHCI_CPU_INIT
+#define	CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
+#define	CONFIG_SYS_USB_OHCI_SLOT_NAME	"vpac270"
+#define	CONFIG_USB_STORAGE
+#endif
+
+#endif	/* __CONFIG_H */