Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 256 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/s5pc210_universal.h b/qemu/roms/u-boot/include/configs/s5pc210_universal.h
new file mode 100644
index 000000000..2da887109
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/s5pc210_universal.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_UNIVERSAL_H
+#define __CONFIG_UNIVERSAL_H
+
+#include <configs/exynos4-dt.h>
+
+#define CONFIG_SYS_PROMPT	"Universal # "	/* Monitor Command Prompt */
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE	exynos4210-universal_c210
+
+#define CONFIG_TIZEN			/* TIZEN lib */
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_L2CACHE_OFF		1
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
+
+#define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_BOOTARGS			"Please use defined boot"
+#define CONFIG_BOOTCOMMAND		"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
+					- GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_TEXT_BASE		0x44800000
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
+				"128k(s-boot)"\
+				",896k(bootloader)"\
+				",256k(params)"\
+				",2816k(config)"\
+				",8m(csa)"\
+				",7m(kernel)"\
+				",1m(log)"\
+				",12m(modem)"\
+				",60m(qboot)"\
+				",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+				"${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"updateb=" \
+		"onenand erase 0x0 0x100000;" \
+		"onenand write 0x42008000 0x0 0x100000\0" \
+	"updatek=" \
+		"onenand erase 0xc00000 0x500000;" \
+		"onenand write 0x41008000 0xc00000 0x500000\0" \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"ubifsboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+	"tftpboot=" \
+		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+		CONFIG_ENV_COMMON_BOOT \
+		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mtdparts=" MTDPARTS_DEFAULT \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M@0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"ubi=enabled\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=3\0" \
+	"opts=always_resume=1"
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND
+#define CONFIG_SYS_ONENAND_BASE		0x0C000000
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
+
+#define CONFIG_CMD_I2C
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#define CONFIG_SOFT_I2C_READ_REPEATED_START
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS	7
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_SOFT_SPI
+#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
+#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
+#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
+#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
+#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
+
+#define SPI_DELAY udelay(1)
+#undef SPI_INIT
+#define SPI_SCL(bit) universal_spi_scl(bit)
+#define SPI_SDA(bit) universal_spi_sda(bit)
+#define SPI_READ universal_spi_read()
+#ifndef	__ASSEMBLY__
+void universal_spi_scl(int bit);
+void universal_spi_sda(int bit);
+int universal_spi_read(void);
+#endif
+
+/* Common misc for Samsung */
+#define CONFIG_MISC_COMMON
+
+#define CONFIG_MISC_INIT_R
+
+/* Download menu - Samsung common */
+#define CONFIG_LCD_MENU
+#define CONFIG_LCD_MENU_BOARD
+
+/* Download menu - definitions for check keys */
+#ifndef __ASSEMBLY__
+#include <power/max8998_pmic.h>
+
+#define KEY_PWR_PMIC_NAME		"MAX8998_PMIC"
+#define KEY_PWR_STATUS_REG		MAX8998_REG_STATUS1
+#define KEY_PWR_STATUS_MASK		(1 << 7)
+#define KEY_PWR_INTERRUPT_REG		MAX8998_REG_IRQ1
+#define KEY_PWR_INTERRUPT_MASK		(1 << 7)
+
+#define KEY_VOL_UP_GPIO			exynos4_gpio_get(2, x2, 0)
+#define KEY_VOL_DOWN_GPIO		exynos4_gpio_get(2, x2, 1)
+#endif /* __ASSEMBLY__ */
+
+/* LCD console */
+#define LCD_BPP			LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/*
+ * LCD Settings
+ */
+#define CONFIG_EXYNOS_FB
+#define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_LD9040
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
+
+#define LCD_XRES	480
+#define LCD_YRES	800
+
+#endif	/* __CONFIG_H */