Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 126 deletions

diff --git a/qemu/roms/u-boot/include/configs/openrd.h b/qemu/roms/u-boot/include/configs/openrd.h
deleted file mode 100644
index 8fab6e63e..000000000
--- a/qemu/roms/u-boot/include/configs/openrd.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) Copyright 2009
- * Net Insight <www.netinsight.net>
- * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
- *
- * Based on sheevaplug.h:
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _CONFIG_OPENRD_H
-#define _CONFIG_OPENRD_H
-
-/*
- * Version number information
- */
-#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
-# define CONFIG_IDENT_STRING	"\nOpenRD-Ultimate"
-#else
-# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
-#  define CONFIG_IDENT_STRING	"\nOpenRD-Client"
-# else
-#  ifdef CONFIG_BOARD_IS_OPENRD_BASE
-#   define CONFIG_IDENT_STRING	"\nOpenRD-Base"
-#  else
-#   error Unknown OpenRD board specified
-#  endif
-# endif
-#endif
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
-#define CONFIG_KIRKWOOD		1	/* SOC Family Name */
-#define CONFIG_KW88F6281	1	/* SOC Name */
-#define CONFIG_MACH_OPENRD_BASE	/* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#define CONFIG_SYS_MVFS
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-/*
- *  Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
-#endif
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-#define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0x60000
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"${x_bootcmd_usb}; bootm 0x6400000;"
-
-#define MTDIDS_DEFAULT		"nand0=nand_mtd"
-#define MTDPARTS_DEFAULT	"mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
-	"0x400000@0x100000(uImage),"\
-	"0x1fb00000@0x500000(rootfs)"
-
-#define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"		\
-	"=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"		\
-	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"	\
-	"x_bootcmd_usb=usb start\0"					\
-	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"		\
-	"mtdids="MTDIDS_DEFAULT"\0"					\
-	"mtdparts="MTDPARTS_DEFAULT"\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-# ifdef CONFIG_BOARD_IS_OPENRD_BASE
-#  define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-# else
-#  define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
-# endif
-# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
-#  define CONFIG_PHY_BASE_ADR	0x0
-#  define PHY_NO		"88E1121"
-# else
-#  define CONFIG_PHY_BASE_ADR	0x8
-#  define PHY_NO		"88E1116"
-# endif
-#endif /* CONFIG_CMD_NET */
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-#endif /* _CONFIG_OPENRD_BASE_H */