Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 204 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/m28evk.h b/qemu/roms/u-boot/include/configs/m28evk.h
new file mode 100644
index 000000000..bb1fa44d8
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/m28evk.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef __CONFIGS_M28EVK_H__
+#define __CONFIGS_M28EVK_H__
+
+
+/* System configurations */
+#define CONFIG_MX28				/* i.MX28 SoC */
+#define MACH_TYPE_M28EVK	3613
+#define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
+
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
+#define	CONFIG_VIDEO
+
+#define CONFIG_REGEX			/* Enable regular expression support */
+
+/* Memory configuration */
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+/* Environment */
+#define CONFIG_ENV_SIZE			(16 * 1024)
+#define CONFIG_ENV_IS_IN_NAND
+
+/* Environment is in NAND */
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#define CONFIG_ENV_OFFSET		0x300000
+#define CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT			\
+	"mtdparts=gpmi-nand:"			\
+		"3m(bootloader)ro,"		\
+		"512k(environment),"		\
+		"512k(redundant-environment),"	\
+		"4m(kernel),"			\
+		"128k(fdt),"			\
+		"8m(ramdisk),"			\
+		"-(filesystem)"
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+/* FEC Ethernet on SoC */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#endif
+
+/* RTC */
+#ifdef CONFIG_CMD_DATE
+/* Use the internal RTC in the MXS chip */
+#define CONFIG_RTC_INTERNAL
+#ifdef CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_MXS
+#else
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
+#endif
+#endif
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+#define CONFIG_USB_STORAGE
+#endif
+
+/* SPI */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_DEFAULT_SPI_BUS		2
+#define CONFIG_DEFAULT_SPI_CS		0
+#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
+
+/* SPI FLASH */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS		2
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		40000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+
+#define CONFIG_ENV_SPI_BUS		2
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		40000000
+#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
+#endif
+
+#endif
+
+/* LCD */
+#ifdef CONFIG_VIDEO
+#define	CONFIG_VIDEO_LOGO
+#define	CONFIG_SPLASH_SCREEN
+#define	CONFIG_CMD_BMP
+#define	CONFIG_BMP_16BPP
+#define	CONFIG_VIDEO_BMP_RLE8
+#define	CONFIG_VIDEO_BMP_GZIP
+#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
+#endif
+
+/* Booting Linux */
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
+#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
+#define CONFIG_LOADADDR		0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/* Extra Environment */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"update_nand_full_filename=u-boot.nand\0"			\
+	"update_nand_firmware_filename=u-boot.sb\0"			\
+	"update_sd_firmware_filename=u-boot.sd\0"			\
+	"update_nand_firmware_maxsz=0x100000\0"				\
+	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */	\
+	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */	\
+	"update_nand_get_fcb_size="	/* Get size of FCB blocks */	\
+		"nand device 0 ; "					\
+		"nand info ; "						\
+		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
+		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
+	"update_nand_full="		/* Update FCB, DBBT and FW */	\
+		"if tftp ${update_nand_full_filename} ; then "		\
+		"run update_nand_get_fcb_size ; "			\
+		"nand scrub -y 0x0 ${filesize} ; "			\
+		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
+		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
+		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
+		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
+		"fi\0"							\
+	"update_nand_firmware="		/* Update only firmware */	\
+		"if tftp ${update_nand_firmware_filename} ; then "	\
+		"run update_nand_get_fcb_size ; "			\
+		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
+		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "	\
+		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
+		"nand erase ${fcb_sz} ${fw_sz} ; "			\
+		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; "	\
+		"nand write ${loadaddr} ${fw_off} ${filesize} ; "	\
+		"fi\0"							\
+	"update_sd_firmware="		/* Update the SD firmware partition */ \
+		"if mmc rescan ; then "					\
+		"if tftp ${update_sd_firmware_filename} ; then "	\
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"setexpr fw_sz ${fw_sz} + 1 ; "				\
+		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
+		"fi ; "							\
+		"fi\0"
+
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif /* __CONFIGS_M28EVK_H__ */