Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 314 deletions

diff --git a/qemu/roms/u-boot/include/configs/grsim.h b/qemu/roms/u-boot/include/configs/grsim.h
deleted file mode 100644
index 556c749f9..000000000
--- a/qemu/roms/u-boot/include/configs/grsim.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/* Configuration header file for LEON3 GRSIM, trying to be similar
- * to Gaisler's GR-XC3S-1500 board.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- *
- * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
- *
- * TSIM command
- *  tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
- *
- */
-
-#define CONFIG_GRSIM		0	/* ... not running on GRSIM */
-#define CONFIG_TSIM		1	/* ... running on TSIM */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
-
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_AMBAPP	/* AMBA Plyg&Play information	*/
-#define CONFIG_CMD_BDI		/* bdinfo			*/
-#define CONFIG_CMD_CONSOLE	/* coninfo			*/
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO		/* echo arguments		*/
-#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
-#define CONFIG_CMD_LOADB	/* loadb			*/
-#define CONFIG_CMD_LOADS	/* loads			*/
-#define CONFIG_CMD_MISC		/* Misc functions like sleep etc */
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN		/* run command in env variable	*/
-#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
-#define CONFIG_CMD_SOURCE	/* "source" command support	*/
-#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-/*#define CONFIG_SYS_HUSH_PARSER 0*/
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"rootpath=/export/roofs\0"					\
-	"scratch=40000000\0"					\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"ethaddr=00:00:7A:CC:00:12\0" \
-	"bootargs=console=ttyS0,38400" \
-	""
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.81
-#define CONFIG_IPADDR 192.168.0.80
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory:
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 256kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_NO_FLASH		1
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00800000
-#define CONFIG_ENV_SIZE		0x8000
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-
-#ifdef ENABLE_FLASH_SUPPORT
-/* For use with grsim FLASH emulation extension */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-#undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#endif
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE 1
-/*#define CONFIG_ENV_IS_IN_FLASH*/
-/*#define CONFIG_ENV_SIZE		0x8000*/
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		0x02000000
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_GRETH	1
-
-/* Default HARDWARE address */
-#define GRETH_HWADDR_0 0x00
-#define GRETH_HWADDR_1 0x00
-#define GRETH_HWADDR_2 0x7A
-#define GRETH_HWADDR_3 0xcc
-#define GRETH_HWADDR_4 0x00
-#define GRETH_HWADDR_5 0x12
-
-#define CONFIG_ETHADDR   00:00:7a:cc:00:12
-
-/*
- * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
- */
-/* #define CONFIG_GRETH_10MBIT 1 */
-#define CONFIG_PHY_ADDR		0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
-#define CONFIG_SYS_GRLIB_SDRAM     0
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
-#if CONFIG_GRSIM
-/* GRSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
-#else
-/* TSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x00001820
-#endif
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
-
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
-
-/* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
-
-/* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#define CONFIG_IDENT_STRING "Gaisler GRSIM"
-
-#endif				/* __CONFIG_H */