Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/gplugd.h b/qemu/roms/u-boot/include/configs/gplugd.h
new file mode 100644
index 000000000..404c56af1
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/gplugd.h
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * Based on Aspenite:
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_GPLUGD_H
+#define __CONFIG_GPLUGD_H
+
+/*
+ * FIXME: fix for error caused due to recent update to mach-types.h
+ */
+#include <asm/mach-types.h>
+#ifdef MACH_TYPE_SHEEVAD
+#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
+#else
+#define MACH_TYPE_SHEEVAD	2625
+#endif
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING	"\nMarvell-gplugD"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
+#define CONFIG_ARMADA100		1	/* SOC Family Name */
+#define CONFIG_ARMADA168		1	/* SOC Used on this Board */
+#define CONFIG_MACH_TYPE		MACH_TYPE_SHEEVAD /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+
+#define	CONFIG_SYS_TEXT_BASE	0x00f00000
+
+/*
+ * There is no internal RAM in ARMADA100, using DRAM
+ * TBD: dcache to be used for this
+ */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
+#define CONFIG_NR_DRAM_BANKS_MAX	2
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_FPGA
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* Disable DCACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Network configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_ARMADA100_FEC
+
+/* DHCP Support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
+#endif /* CONFIG_CMD_NET */
+
+/* GPIO Support */
+#define CONFIG_MARVELL_GPIO
+
+/* PHY configuration */
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_RESET_PHY_R
+/* 88E3015 register definition */
+#define PHY_LED_PAR_SEL_REG		22
+#define PHY_LED_MAN_REG			25
+#define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
+/* GPIO Configuration for PHY */
+#define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
+
+/* SPI Support */
+#define CONFIG_ARMADA100_SPI
+#define CONFIG_ENV_SPI_CS		110
+#define CONFIG_SYS_SSP_PORT		2
+
+/* Flash Support */
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_ATMEL
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+#undef CONFIG_ARCH_MISC_INIT
+
+#ifdef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SYS_NS16550_COM1
+#endif /* CONFIG_SYS_NS16550_COM1 */
+
+#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE		0x4000
+#define CONFIG_ENV_SIZE			0x4000
+#define CONFIG_ENV_OFFSET		0x07C000
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_SAVEENV
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ARMADA100
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+#endif	/* __CONFIG_GPLUGD_H */