Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/dns325.h b/qemu/roms/u-boot/include/configs/dns325.h
new file mode 100644
index 000000000..96db44f51
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/dns325.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2011
+ * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CONFIG_DNS325_H
+#define _CONFIG_DNS325_H
+
+/*
+ * Machine number definition
+ */
+#define MACH_TYPE_DNS325		3800
+#define CONFIG_MACH_TYPE		MACH_TYPE_DNS325
+#define CONFIG_IDENT_STRING		"\nD-Link DNS-325"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
+#define CONFIG_KIRKWOOD			/* SOC Family Name */
+#define CONFIG_KW88F6281		/* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_SYS_MVFS
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+#undef CONFIG_SYS_PROMPT
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
+#define CONFIG_NETCONSOLE
+#endif
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
+#endif
+
+/*
+ * RTC driver configuration
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif
+
+/*
+ * Enable GPI0 support
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Console configuration
+ */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Display cpu info at boot
+ */
+#define CONFIG_DISPLAY_CPUINFO
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
+#define CONFIG_ENV_ADDR			0xe0000
+#define CONFIG_ENV_OFFSET		0xe0000	/* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define MTDIDS_DEFAULT			"nand0=orion_nand"
+
+#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:" \
+	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0" \
+	"loadaddr=0x800000\0" \
+	"autoload=no\0" \
+	"console=ttyS0,115200\0" \
+	"mtdparts="MTDPARTS_DEFAULT \
+	"optargs=\0" \
+	"bootenv=uEnv.txt\0" \
+	"importbootenv=echo Importing environment ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
+	"setbootargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"${mtdparts} " \
+		"root=${bootenvroot} " \
+		"rootfstype=${bootenvrootfstype}\0" \
+	"subbootcmd=run setbootargs; " \
+		"if run bootenvloadimage; then " \
+			"bootm ${loadaddr};" \
+		"fi;\0" \
+	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
+	"nandrootfstype=ubifs\0" \
+	"nandloadimage=nand read ${loadaddr} kernel\0" \
+	"setnandbootenv=echo Booting from nand ...; " \
+		"setenv bootenvroot ${nandroot}; " \
+		"setenv bootenvrootfstype ${nandrootfstype}; " \
+		"setenv bootenvloadimage ${nandloadimage}\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"if test -n ${bootenv} && usb start; then " \
+		"if run loadbootenv; then " \
+			"echo Loaded environment ${bootenv} from usb;" \
+			"run importbootenv;" \
+		"fi;" \
+		"if test -n ${bootenvcmd}; then " \
+			"echo Running bootenvcmd ...;" \
+			"run bootenvcmd;" \
+		"fi;" \
+	"fi;" \
+	"run setnandbootenv subbootcmd;"
+
+#endif /* _CONFIG_DNS325_H */