Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 103 deletions

diff --git a/qemu/roms/u-boot/include/configs/bf525-ucr2.h b/qemu/roms/u-boot/include/configs/bf525-ucr2.h
deleted file mode 100644
index 008f4b5ec..000000000
--- a/qemu/roms/u-boot/include/configs/bf525-ucr2.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * U-boot - Configuration file for bf525-ucr2 board
- * The board includes ADSP-BF525 rev. 0.2,
- * 32-bit SDRAM (SAMSUNG K4S561632H-UC75),
- * USB 2.0 High Speed OTG USB WIFI,
- * SPI flash (cFeon EN25Q128 16 MB),
- * Support PPI and ITU-R656,
- * See http://www.ucrobotics.com/?q=cn/ucr2
- */
-
-#ifndef __CONFIG_BF525_UCR2_H__
-#define __CONFIG_BF525_UCR2_H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf525-0.2
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_SPI_MASTER
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			24000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			20
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			4
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	9
-#define CONFIG_MEM_SIZE		32
-
-/*
- * SDRAM reference page
- * http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
- */
-#define CONFIG_EBIU_SDRRC_VAL   0x3f8
-#define CONFIG_EBIU_SDGCTL_VAL  0x9111cd
-
-#define CONFIG_EBIU_AMGCTL_VAL  (AMBEN_ALL)
-#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
-#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-
-#define CONFIG_SYS_MONITOR_LEN	(320 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(320 * 1024)
-
-/* We don't have a parallel flash chip */
-#define CONFIG_SYS_NO_FLASH
-
-/* support for serial flash */
-#define CONFIG_BFIN_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_HZ	30000000
-#define CONFIG_SPI_FLASH_EON
-
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_ENV_OFFSET	0x10000
-#define CONFIG_ENV_SIZE		0x10000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Misc Settings
- */
-#define CONFIG_UART_CONSOLE	0
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BFIN_SERIAL
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw"
-#define CONFIG_BOOTCOMMAND	"run sfboot"
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"sfboot=sf probe 1;" \
-		"sf read 0x1000000 0x20000 0x300000;" \
-		"bootm 0x1000000\0"
-
-/* this sets up the default list of enabled commands */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET	/* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_IMLS
-
-#endif