Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 244 deletions

diff --git a/qemu/roms/u-boot/include/configs/at91sam9x5ek.h b/qemu/roms/u-boot/include/configs/at91sam9x5ek.h
deleted file mode 100644
index f0a6757ff..000000000
--- a/qemu/roms/u-boot/include/configs/at91sam9x5ek.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright (C) 2012 Atmel Corporation
- *
- * Configuation settings for the AT91SAM9X5EK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-
-#define CONFIG_AT91SAM9X5EK
-#define CONFIG_AT91FAMILY
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
-#define CONFIG_USART_ID		ATMEL_ID_SYS
-
-/* LCD */
-#define CONFIG_LCD
-#define LCD_BPP			LCD_COLOR16
-#define LCD_OUTPUT_BPP		24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* no NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-/*
- * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
- * NB: in this case, USB 1.1 devices won't be recognized.
- */
-
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_DBW_8		1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
-
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC		1
-#define CONFIG_ATMEL_NAND_HW_PMECC	1
-#define CONFIG_PMECC_CAP		2
-#define CONFIG_PMECC_SECTOR_SIZE	512
-
-#define CONFIG_CMD_NAND_TRIMFFS
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
-
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#ifdef CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#else
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9x5"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
-#endif
-#define CONFIG_USB_STORAGE
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x26e00000
-
-#ifdef CONFIG_SYS_USE_NANDFLASH
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0xc0000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x300000; " \
-				"bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_SPIFLASH)
-/* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET	0x5000
-#define CONFIG_ENV_SIZE		0x3000
-#define CONFIG_ENV_SECT_SIZE	0x1000
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x100000 0x300000; " \
-				"bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-#else /* CONFIG_SYS_USE_MMC */
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_MMC
-/* For FAT system, most cases it should be in the reserved sector */
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_SIZE		0x1000
-#define CONFIG_SYS_MMC_ENV_DEV	0
-#endif
-
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
-				"mtdparts=atmel_nand:" \
-				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
-				"root=/dev/mmcblk0p2 " \
-				"rw rootfstype=ext4 rootwait"
-#else
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256k(env),256k(env_redundant),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
-#endif
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_PROMPT	"U-Boot> "
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
-					+ 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
-
-#endif