Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 455 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/include/configs/M54455EVB.h b/qemu/roms/u-boot/include/configs/M54455EVB.h
new file mode 100644
index 000000000..7a55d3c61
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/M54455EVB.h
@@ -0,0 +1,455 @@
+/*
+ * Configuation settings for the Freescale MCF54455 EVB board.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M54455EVB_H
+#define _M54455EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5445x		/* define processor family */
+#define CONFIG_M54455		/* define processor type */
+#define CONFIG_M54455EVB	/* M54455EVB board */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE		115200
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#undef CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+/* Network configuration */
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_MII		1
+#	define CONFIG_MII_INIT		1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC1_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define MCFFEC_TOUT_LOOP 50000
+#	define CONFIG_HAS_ETH1
+
+#	define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#	define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
+#	define CONFIG_ETHADDR		00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR		00:e0:0c:bc:e5:61
+#	define CONFIG_ETHPRIME		"FEC0"
+#	define CONFIG_IPADDR		192.162.1.2
+#	define CONFIG_NETMASK		255.255.255.0
+#	define CONFIG_SERVERIP		192.162.1.1
+#	define CONFIG_GATEWAYIP		192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_HOSTNAME		M54455EVB
+#ifdef CONFIG_SYS_STMICRO_BOOT
+/* ST Micro serial flash */
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010013
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"sbfhdr=sbfhdr.bin\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${sbfhdr};"	\
+	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
+	"upd=run load; run prog\0"		\
+	"prog=sf probe 0:1 1000000 3;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 0x30000;"	\
+	"save\0"				\
+	""
+#else
+/* Atmel and Intel */
+#ifdef CONFIG_SYS_ATMEL_BOOT
+#	define CONFIG_SYS_UBOOT_END	0x0403FFFF
+#elif defined(CONFIG_SYS_INTEL_BOOT)
+#	define CONFIG_SYS_UBOOT_END	0x3FFFF
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${uboot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)	\
+	" " __stringify(CONFIG_SYS_UBOOT_END) ";"		\
+	"era " __stringify(CONFIG_SYS_FLASH_BASE) " "		\
+	__stringify(CONFIG_SYS_UBOOT_END) ";"			\
+	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)	\
+	" ${filesize}; save\0"			\
+	""
+#endif
+
+/* ATA configuration */
+#define CONFIG_ISO_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_IDE_RESET	1
+#define CONFIG_IDE_PREINIT	1
+#define CONFIG_ATAPI
+#undef CONFIG_LBA48
+
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	2
+
+#define CONFIG_SYS_ATA_BASE_ADDR	0x90000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0
+
+#define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O                            */
+#define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
+#define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
+
+/* Realtime clock */
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2c */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_SPI
+#define CONFIG_CF_DSPI
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SBFHDR_SIZE		0x13
+#ifdef CONFIG_CMD_SPI
+#	define CONFIG_SPI_FLASH
+#	define CONFIG_SPI_FLASH_STMICRO
+
+#	define CONFIG_SYS_DSPI_CTAR0		(DSPI_CTAR_TRSZ(7) | \
+					 DSPI_CTAR_PCSSCK_1CLK | \
+					 DSPI_CTAR_PASC(0) | \
+					 DSPI_CTAR_PDT(0) | \
+					 DSPI_CTAR_CSSCK(0) | \
+					 DSPI_CTAR_ASC(0) | \
+					 DSPI_CTAR_DT(1))
+#endif
+
+/* PCI */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI		1
+#define CONFIG_PCI_PNP		1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
+
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	4
+
+#define CONFIG_SYS_PCI_MEM_BUS		0xA0000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
+
+#define CONFIG_SYS_PCI_IO_BUS		0xB1000000
+#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
+
+#define CONFIG_SYS_PCI_CFG_BUS		0xB0000000
+#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
+#endif
+
+/* FPGA - Spartan 2 */
+/* experiment
+#define CONFIG_FPGA
+#define CONFIG_FPGA_COUNT	1
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
+*/
+
+/* Input, PCI, Flexbus, and VCO */
+#define CONFIG_EXTRA_CLOCK
+
+#define CONFIG_PRAM		2048	/* 2048 KB */
+
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE			1024	/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE			256	/* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
+
+#define CONFIG_SYS_MBAR		0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_SIZE		0x8000	/* Size of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_BASE1		0x48000000
+#define CONFIG_SYS_SDRAM_SIZE		256	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x65311610
+#define CONFIG_SYS_SDRAM_CFG2		0x59670000
+#define CONFIG_SYS_SDRAM_CTRL		0xEA0B2000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x00010033
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0xAA
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_SERIAL_BOOT
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
+#else
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+/* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/*
+ * Configuration for environment
+ * Environment is not embedded in u-boot. First time runing may have env
+ * crc error warning if there is no correct environment on the flash.
+ */
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_ENV_IS_IN_SPI_FLASH
+#	define CONFIG_ENV_SPI_CS		1
+#else
+#	define CONFIG_ENV_IS_IN_FLASH	1
+#endif
+#undef CONFIG_ENV_OVERWRITE
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_OFFSET		0x30000
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+#ifdef CONFIG_SYS_ATMEL_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+#ifdef CONFIG_SYS_INTEL_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x20000
+#endif
+
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+
+#	define CONFIG_FLASH_CFI_DRIVER	1
+#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
+#	define CONFIG_FLASH_CFI_LEGACY
+
+#ifdef CONFIG_FLASH_CFI_LEGACY
+#	define CONFIG_SYS_ATMEL_REGION		4
+#	define CONFIG_SYS_ATMEL_TOTALSECT	11
+#	define CONFIG_SYS_ATMEL_SECT		{1, 2, 1, 7}
+#	define CONFIG_SYS_ATMEL_SECTSZ		{0x4000, 0x2000, 0x8000, 0x10000}
+#endif
+#endif
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
+ */
+#ifdef CONFIG_CMD_JFFS2
+#ifdef CF_STMICRO_BOOT
+#	define CONFIG_JFFS2_DEV		"nor1"
+#	define CONFIG_JFFS2_PART_SIZE	0x01000000
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH2_BASE + 0x500000)
+#endif
+#ifdef CONFIG_SYS_ATMEL_BOOT
+#	define CONFIG_JFFS2_DEV		"nor1"
+#	define CONFIG_JFFS2_PART_SIZE	0x01000000
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH1_BASE + 0x500000)
+#endif
+#ifdef CONFIG_SYS_INTEL_BOOT
+#	define CONFIG_JFFS2_DEV		"nor0"
+#	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
+#endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE		16
+
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
+					 CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - CompactFlash and registers
+ * CS2 - CPLD
+ * CS3 - FPGA
+ * CS4 - Available
+ * CS5 - Available
+ */
+
+#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
+ /* Atmel Flash */
+#define CONFIG_SYS_CS0_BASE		0x04000000
+#define CONFIG_SYS_CS0_MASK		0x00070001
+#define CONFIG_SYS_CS0_CTRL		0x00001140
+/* Intel Flash */
+#define CONFIG_SYS_CS1_BASE		0x00000000
+#define CONFIG_SYS_CS1_MASK		0x01FF0001
+#define CONFIG_SYS_CS1_CTRL		0x00000D60
+
+#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS0_BASE
+#else
+/* Intel Flash */
+#define CONFIG_SYS_CS0_BASE		0x00000000
+#define CONFIG_SYS_CS0_MASK		0x01FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00000D60
+ /* Atmel Flash */
+#define CONFIG_SYS_CS1_BASE		0x04000000
+#define CONFIG_SYS_CS1_MASK		0x00070001
+#define CONFIG_SYS_CS1_CTRL		0x00001140
+
+#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS1_BASE
+#endif
+
+/* CPLD */
+#define CONFIG_SYS_CS2_BASE		0x08000000
+#define CONFIG_SYS_CS2_MASK		0x00070001
+#define CONFIG_SYS_CS2_CTRL		0x003f1140
+
+/* FPGA */
+#define CONFIG_SYS_CS3_BASE		0x09000000
+#define CONFIG_SYS_CS3_MASK		0x00070001
+#define CONFIG_SYS_CS3_CTRL		0x00000020
+
+#endif				/* _M54455EVB_H */