Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 231 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c b/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c
new file mode 100644
index 000000000..edd91a84a
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c
@@ -0,0 +1,231 @@
+/*
+ * SAMSUNG EXYNOS USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <usb.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ehci.h>
+#include <asm/arch/system.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm-generic/errno.h>
+#include <linux/compat.h>
+#include "ehci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Contains pointers to register base addresses
+ * for the usb controller.
+ */
+struct exynos_ehci {
+	struct exynos_usb_phy *usb;
+	struct ehci_hccr *hcd;
+	struct fdt_gpio_state vbus_gpio;
+};
+
+static struct exynos_ehci exynos;
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
+{
+	fdt_addr_t addr;
+	unsigned int node;
+	int depth;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
+	if (node <= 0) {
+		debug("EHCI: Can't get device node for ehci\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get the base address for EHCI controller from the device node
+	 */
+	addr = fdtdec_get_addr(blob, node, "reg");
+	if (addr == FDT_ADDR_T_NONE) {
+		debug("Can't get the EHCI register address\n");
+		return -ENXIO;
+	}
+
+	exynos->hcd = (struct ehci_hccr *)addr;
+
+	/* Vbus gpio */
+	fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+
+	depth = 0;
+	node = fdtdec_next_compatible_subnode(blob, node,
+					COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
+	if (node <= 0) {
+		debug("EHCI: Can't get device node for usb-phy controller\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get the base address for usbphy from the device node
+	 */
+	exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
+								"reg");
+	if (exynos->usb == NULL) {
+		debug("Can't get the usbphy register address\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+#endif
+
+/* Setup the EHCI host controller. */
+static void setup_usb_phy(struct exynos_usb_phy *usb)
+{
+	u32 hsic_ctrl;
+
+	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
+
+	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
+
+	clrbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_FSEL_MASK |
+			HOST_CTRL0_COMMONON_N |
+			/* HOST Phy setting */
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+
+	setbits_le32(&usb->usbphyctrl0,
+			/* Setting up the ref freq */
+			(CLK_24MHZ << 16) |
+			/* HOST Phy setting */
+			HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+	udelay(10);
+	clrbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+
+	/* HSIC Phy Setting */
+	hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+			HSIC_CTRL_FORCESLEEP |
+			HSIC_CTRL_SIDDQ);
+
+	clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+	clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+	hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
+				<< HSIC_CTRL_REFCLKDIV_SHIFT)
+			| ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
+				<< HSIC_CTRL_REFCLKSEL_SHIFT)
+			| HSIC_CTRL_UTMISWRST);
+
+	setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+	setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+	udelay(10);
+
+	clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
+					HSIC_CTRL_UTMISWRST);
+
+	clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
+					HSIC_CTRL_UTMISWRST);
+
+	udelay(20);
+
+	/* EHCI Ctrl setting */
+	setbits_le32(&usb->ehcictrl,
+			EHCICTRL_ENAINCRXALIGN |
+			EHCICTRL_ENAINCR4 |
+			EHCICTRL_ENAINCR8 |
+			EHCICTRL_ENAINCR16);
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct exynos_usb_phy *usb)
+{
+	u32 hsic_ctrl;
+
+	/* HOST_PHY reset */
+	setbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+
+	/* HSIC Phy reset */
+	hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+			HSIC_CTRL_FORCESLEEP |
+			HSIC_CTRL_SIDDQ |
+			HSIC_CTRL_PHYSWRST);
+
+	setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+	setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
+}
+
+/*
+ * EHCI-initialization
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	struct exynos_ehci *ctx = &exynos;
+
+#ifdef CONFIG_OF_CONTROL
+	if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
+		debug("Unable to parse device tree for ehci-exynos\n");
+		return -ENODEV;
+	}
+#else
+	ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
+	ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
+#endif
+
+#ifdef CONFIG_OF_CONTROL
+	/* setup the Vbus gpio here */
+	if (fdt_gpio_isvalid(&ctx->vbus_gpio) &&
+	    !fdtdec_setup_gpio(&ctx->vbus_gpio))
+		gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+#endif
+
+	setup_usb_phy(ctx->usb);
+
+	board_usb_init(index, init);
+
+	*hccr = ctx->hcd;
+	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+				+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)*hccr, (uint32_t)*hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+	struct exynos_ehci *ctx = &exynos;
+
+	reset_usb_phy(ctx->usb);
+
+	return 0;
+}