Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 341 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/spi/tegra20_sflash.c b/qemu/roms/u-boot/drivers/spi/tegra20_sflash.c
new file mode 100644
index 000000000..b5d561be3
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/spi/tegra20_sflash.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2010-2013 NVIDIA Corporation
+ * With help from the mpc8xxx SPI driver
+ * With more help from omap3_spi SPI driver
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra20/tegra20_sflash.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SPI_CMD_GO			(1 << 30)
+#define SPI_CMD_ACTIVE_SCLK_SHIFT	26
+#define SPI_CMD_ACTIVE_SCLK_MASK	(3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
+#define SPI_CMD_CK_SDA			(1 << 21)
+#define SPI_CMD_ACTIVE_SDA_SHIFT	18
+#define SPI_CMD_ACTIVE_SDA_MASK		(3 << SPI_CMD_ACTIVE_SDA_SHIFT)
+#define SPI_CMD_CS_POL			(1 << 16)
+#define SPI_CMD_TXEN			(1 << 15)
+#define SPI_CMD_RXEN			(1 << 14)
+#define SPI_CMD_CS_VAL			(1 << 13)
+#define SPI_CMD_CS_SOFT			(1 << 12)
+#define SPI_CMD_CS_DELAY		(1 << 9)
+#define SPI_CMD_CS3_EN			(1 << 8)
+#define SPI_CMD_CS2_EN			(1 << 7)
+#define SPI_CMD_CS1_EN			(1 << 6)
+#define SPI_CMD_CS0_EN			(1 << 5)
+#define SPI_CMD_BIT_LENGTH		(1 << 4)
+#define SPI_CMD_BIT_LENGTH_MASK		0x0000001F
+
+#define SPI_STAT_BSY			(1 << 31)
+#define SPI_STAT_RDY			(1 << 30)
+#define SPI_STAT_RXF_FLUSH		(1 << 29)
+#define SPI_STAT_TXF_FLUSH		(1 << 28)
+#define SPI_STAT_RXF_UNR		(1 << 27)
+#define SPI_STAT_TXF_OVF		(1 << 26)
+#define SPI_STAT_RXF_EMPTY		(1 << 25)
+#define SPI_STAT_RXF_FULL		(1 << 24)
+#define SPI_STAT_TXF_EMPTY		(1 << 23)
+#define SPI_STAT_TXF_FULL		(1 << 22)
+#define SPI_STAT_SEL_TXRX_N		(1 << 16)
+#define SPI_STAT_CUR_BLKCNT		(1 << 15)
+
+#define SPI_TIMEOUT		1000
+#define TEGRA_SPI_MAX_FREQ	52000000
+
+struct spi_regs {
+	u32 command;	/* SPI_COMMAND_0 register  */
+	u32 status;	/* SPI_STATUS_0 register */
+	u32 rx_cmp;	/* SPI_RX_CMP_0 register  */
+	u32 dma_ctl;	/* SPI_DMA_CTL_0 register */
+	u32 tx_fifo;	/* SPI_TX_FIFO_0 register */
+	u32 rsvd[3];	/* offsets 0x14 to 0x1F reserved */
+	u32 rx_fifo;	/* SPI_RX_FIFO_0 register */
+};
+
+struct tegra_spi_ctrl {
+	struct spi_regs *regs;
+	unsigned int freq;
+	unsigned int mode;
+	int periph_id;
+	int valid;
+};
+
+struct tegra_spi_slave {
+	struct spi_slave slave;
+	struct tegra_spi_ctrl *ctrl;
+};
+
+/* tegra20 only supports one SFLASH controller */
+static struct tegra_spi_ctrl spi_ctrls[1];
+
+static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct tegra_spi_slave, slave);
+}
+
+int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	/* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
+	if (bus != 0 || cs != 0)
+		return 0;
+	else
+		return 1;
+}
+
+struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
+{
+	struct tegra_spi_slave *spi;
+
+	if (!spi_cs_is_valid(bus, cs)) {
+		printf("SPI error: unsupported bus %d / chip select %d\n",
+		       bus, cs);
+		return NULL;
+	}
+
+	if (max_hz > TEGRA_SPI_MAX_FREQ) {
+		printf("SPI error: unsupported frequency %d Hz. Max frequency"
+			" is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
+		return NULL;
+	}
+
+	spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs);
+	if (!spi) {
+		printf("SPI error: malloc of SPI structure failed\n");
+		return NULL;
+	}
+	spi->ctrl = &spi_ctrls[bus];
+	if (!spi->ctrl) {
+		printf("SPI error: could not find controller for bus %d\n",
+		       bus);
+		return NULL;
+	}
+
+	if (max_hz < spi->ctrl->freq) {
+		debug("%s: limiting frequency from %u to %u\n", __func__,
+		      spi->ctrl->freq, max_hz);
+		spi->ctrl->freq = max_hz;
+	}
+	spi->ctrl->mode = mode;
+
+	return &spi->slave;
+}
+
+void tegra20_spi_free_slave(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+	free(spi);
+}
+
+int tegra20_spi_init(int *node_list, int count)
+{
+	struct tegra_spi_ctrl *ctrl;
+	int i;
+	int node = 0;
+	int found = 0;
+
+	for (i = 0; i < count; i++) {
+		ctrl = &spi_ctrls[i];
+		node = node_list[i];
+
+		ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+								node, "reg");
+		if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
+			debug("%s: no slink register found\n", __func__);
+			continue;
+		}
+		ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
+					    "spi-max-frequency", 0);
+		if (!ctrl->freq) {
+			debug("%s: no slink max frequency found\n", __func__);
+			continue;
+		}
+
+		ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+		if (ctrl->periph_id == PERIPH_ID_NONE) {
+			debug("%s: could not decode periph id\n", __func__);
+			continue;
+		}
+		ctrl->valid = 1;
+		found = 1;
+
+		debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
+		      __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
+	}
+	return !found;
+}
+
+int tegra20_spi_claim_bus(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+	u32 reg;
+
+	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
+	clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
+			       spi->ctrl->freq);
+
+	/* Clear stale status here */
+	reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
+		SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
+	writel(reg, &regs->status);
+	debug("%s: STATUS = %08x\n", __func__, readl(&regs->status));
+
+	/*
+	 * Use sw-controlled CS, so we can clock in data after ReadID, etc.
+	 */
+	reg = (spi->ctrl->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
+	if (spi->ctrl->mode & 2)
+		reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
+	clrsetbits_le32(&regs->command, SPI_CMD_ACTIVE_SCLK_MASK |
+		SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
+	debug("%s: COMMAND = %08x\n", __func__, readl(&regs->command));
+
+	/*
+	 * SPI pins on Tegra20 are muxed - change pinmux later due to UART
+	 * issue.
+	 */
+	pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH);
+	pinmux_tristate_disable(PMUX_PINGRP_LSPI);
+	pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH);
+
+	return 0;
+}
+
+void tegra20_spi_cs_activate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+
+	/* CS is negated on Tegra, so drive a 1 to get a 0 */
+	setbits_le32(&regs->command, SPI_CMD_CS_VAL);
+}
+
+void tegra20_spi_cs_deactivate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+
+	/* CS is negated on Tegra, so drive a 0 to get a 1 */
+	clrbits_le32(&regs->command, SPI_CMD_CS_VAL);
+}
+
+int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+		const void *data_out, void *data_in, unsigned long flags)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+	u32 reg, tmpdout, tmpdin = 0;
+	const u8 *dout = data_out;
+	u8 *din = data_in;
+	int num_bytes;
+	int ret;
+
+	debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+	      slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen);
+	if (bitlen % 8)
+		return -1;
+	num_bytes = bitlen / 8;
+
+	ret = 0;
+
+	reg = readl(&regs->status);
+	writel(reg, &regs->status);	/* Clear all SPI events via R/W */
+	debug("spi_xfer entry: STATUS = %08x\n", reg);
+
+	reg = readl(&regs->command);
+	reg |= SPI_CMD_TXEN | SPI_CMD_RXEN;
+	writel(reg, &regs->command);
+	debug("spi_xfer: COMMAND = %08x\n", readl(&regs->command));
+
+	if (flags & SPI_XFER_BEGIN)
+		spi_cs_activate(slave);
+
+	/* handle data in 32-bit chunks */
+	while (num_bytes > 0) {
+		int bytes;
+		int is_read = 0;
+		int tm, i;
+
+		tmpdout = 0;
+		bytes = (num_bytes > 4) ?  4 : num_bytes;
+
+		if (dout != NULL) {
+			for (i = 0; i < bytes; ++i)
+				tmpdout = (tmpdout << 8) | dout[i];
+		}
+
+		num_bytes -= bytes;
+		if (dout)
+			dout += bytes;
+
+		clrsetbits_le32(&regs->command, SPI_CMD_BIT_LENGTH_MASK,
+				bytes * 8 - 1);
+		writel(tmpdout, &regs->tx_fifo);
+		setbits_le32(&regs->command, SPI_CMD_GO);
+
+		/*
+		 * Wait for SPI transmit FIFO to empty, or to time out.
+		 * The RX FIFO status will be read and cleared last
+		 */
+		for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+			u32 status;
+
+			status = readl(&regs->status);
+
+			/* We can exit when we've had both RX and TX activity */
+			if (is_read && (status & SPI_STAT_TXF_EMPTY))
+				break;
+
+			if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) !=
+					SPI_STAT_RDY)
+				tm++;
+
+			else if (!(status & SPI_STAT_RXF_EMPTY)) {
+				tmpdin = readl(&regs->rx_fifo);
+				is_read = 1;
+
+				/* swap bytes read in */
+				if (din != NULL) {
+					for (i = bytes - 1; i >= 0; --i) {
+						din[i] = tmpdin & 0xff;
+						tmpdin >>= 8;
+					}
+					din += bytes;
+				}
+			}
+		}
+
+		if (tm >= SPI_TIMEOUT)
+			ret = tm;
+
+		/* clear ACK RDY, etc. bits */
+		writel(readl(&regs->status), &regs->status);
+	}
+
+	if (flags & SPI_XFER_END)
+		spi_cs_deactivate(slave);
+
+	debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n",
+		tmpdin, readl(&regs->status));
+
+	if (ret) {
+		printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret);
+		return -1;
+	}
+
+	return 0;
+}