Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 109 deletions

diff --git a/qemu/roms/u-boot/drivers/rtc/pl031.c b/qemu/roms/u-boot/drivers/rtc/pl031.c
deleted file mode 100644
index c4d1259a8..000000000
--- a/qemu/roms/u-boot/drivers/rtc/pl031.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gururaja Hebbar gururajakr@sanyo.co.in
- *
- * reference linux-2.6.20.6/drivers/rtc/rtc-pl031.c
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-
-#if defined(CONFIG_CMD_DATE)
-
-#ifndef CONFIG_SYS_RTC_PL031_BASE
-#error CONFIG_SYS_RTC_PL031_BASE is not defined!
-#endif
-
-/*
- * Register definitions
- */
-#define	RTC_DR		0x00	/* Data read register */
-#define	RTC_MR		0x04	/* Match register */
-#define	RTC_LR		0x08	/* Data load register */
-#define	RTC_CR		0x0c	/* Control register */
-#define	RTC_IMSC	0x10	/* Interrupt mask and set register */
-#define	RTC_RIS		0x14	/* Raw interrupt status register */
-#define	RTC_MIS		0x18	/* Masked interrupt status register */
-#define	RTC_ICR		0x1c	/* Interrupt clear register */
-
-#define RTC_CR_START	(1 << 0)
-
-#define	RTC_WRITE_REG(addr, val) \
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
-#define	RTC_READ_REG(addr)	\
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
-
-static int pl031_initted = 0;
-
-/* Enable RTC Start in Control register*/
-void rtc_init(void)
-{
-	RTC_WRITE_REG(RTC_CR, RTC_CR_START);
-
-	pl031_initted = 1;
-}
-
-/*
- * Reset the RTC. We set the date back to 1970-01-01.
- */
-void rtc_reset(void)
-{
-	RTC_WRITE_REG(RTC_LR, 0x00);
-	if(!pl031_initted)
-		rtc_init();
-}
-
-/*
- * Set the RTC
-*/
-int rtc_set(struct rtc_time *tmp)
-{
-	unsigned long tim;
-
-	if(!pl031_initted)
-		rtc_init();
-
-	if (tmp == NULL) {
-		puts("Error setting the date/time\n");
-		return -1;
-	}
-
-	/* Calculate number of seconds this incoming time represents */
-	tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-			tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	RTC_WRITE_REG(RTC_LR, tim);
-
-	return -1;
-}
-
-/*
- * Get the current time from the RTC
- */
-int rtc_get(struct rtc_time *tmp)
-{
-	ulong tim;
-
-	if(!pl031_initted)
-		rtc_init();
-
-	if (tmp == NULL) {
-		puts("Error getting the date/time\n");
-		return -1;
-	}
-
-	tim = RTC_READ_REG(RTC_DR);
-
-	to_tm (tim, tmp);
-
-	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-
-	return 0;
-}
-
-#endif