summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/drivers/i2c/mxc_i2c.c
diff options
context:
space:
mode:
authorYang Zhang <yang.z.zhang@intel.com>2015-08-28 09:58:54 +0800
committerYang Zhang <yang.z.zhang@intel.com>2015-09-01 12:44:00 +0800
commite44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch)
tree66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/u-boot/drivers/i2c/mxc_i2c.c
parent9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff)
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/u-boot/drivers/i2c/mxc_i2c.c')
-rw-r--r--qemu/roms/u-boot/drivers/i2c/mxc_i2c.c549
1 files changed, 549 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/i2c/mxc_i2c.c b/qemu/roms/u-boot/drivers/i2c/mxc_i2c.c
new file mode 100644
index 000000000..48468d74b
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/i2c/mxc_i2c.c
@@ -0,0 +1,549 @@
+/*
+ * i2c driver for Freescale i.MX series
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * (c) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on i2c-imx.c from linux kernel:
+ * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
+ * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
+ * Copyright (C) 2007 RightHand Technologies, Inc.
+ * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
+ *
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef I2C_QUIRK_REG
+struct mxc_i2c_regs {
+ uint8_t iadr;
+ uint8_t ifdr;
+ uint8_t i2cr;
+ uint8_t i2sr;
+ uint8_t i2dr;
+};
+#else
+struct mxc_i2c_regs {
+ uint32_t iadr;
+ uint32_t ifdr;
+ uint32_t i2cr;
+ uint32_t i2sr;
+ uint32_t i2dr;
+};
+#endif
+
+#define I2CR_IIEN (1 << 6)
+#define I2CR_MSTA (1 << 5)
+#define I2CR_MTX (1 << 4)
+#define I2CR_TX_NO_AK (1 << 3)
+#define I2CR_RSTA (1 << 2)
+
+#define I2SR_ICF (1 << 7)
+#define I2SR_IBB (1 << 5)
+#define I2SR_IAL (1 << 4)
+#define I2SR_IIF (1 << 1)
+#define I2SR_RX_NO_AK (1 << 0)
+
+#ifdef I2C_QUIRK_REG
+#define I2CR_IEN (0 << 7)
+#define I2CR_IDIS (1 << 7)
+#define I2SR_IIF_CLEAR (1 << 1)
+#else
+#define I2CR_IEN (1 << 7)
+#define I2CR_IDIS (0 << 7)
+#define I2SR_IIF_CLEAR (0 << 1)
+#endif
+
+#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
+#error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
+#endif
+
+#ifdef I2C_QUIRK_REG
+static u16 i2c_clk_div[60][2] = {
+ { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
+ { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
+ { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
+ { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
+ { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
+ { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
+ { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
+ { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
+ { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
+ { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
+ { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
+ { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+ { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+ { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+ { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+#else
+static u16 i2c_clk_div[50][2] = {
+ { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
+ { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
+ { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
+ { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
+ { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
+ { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
+ { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
+ { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
+ { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
+ { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
+ { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
+ { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
+ { 3072, 0x1E }, { 3840, 0x1F }
+};
+#endif
+
+
+#ifndef CONFIG_SYS_MXC_I2C1_SPEED
+#define CONFIG_SYS_MXC_I2C1_SPEED 100000
+#endif
+#ifndef CONFIG_SYS_MXC_I2C2_SPEED
+#define CONFIG_SYS_MXC_I2C2_SPEED 100000
+#endif
+#ifndef CONFIG_SYS_MXC_I2C3_SPEED
+#define CONFIG_SYS_MXC_I2C3_SPEED 100000
+#endif
+
+#ifndef CONFIG_SYS_MXC_I2C1_SLAVE
+#define CONFIG_SYS_MXC_I2C1_SLAVE 0
+#endif
+#ifndef CONFIG_SYS_MXC_I2C2_SLAVE
+#define CONFIG_SYS_MXC_I2C2_SLAVE 0
+#endif
+#ifndef CONFIG_SYS_MXC_I2C3_SLAVE
+#define CONFIG_SYS_MXC_I2C3_SLAVE 0
+#endif
+
+
+/*
+ * Calculate and set proper clock divider
+ */
+static uint8_t i2c_imx_get_clk(unsigned int rate)
+{
+ unsigned int i2c_clk_rate;
+ unsigned int div;
+ u8 clk_div;
+
+#if defined(CONFIG_MX31)
+ struct clock_control_regs *sc_regs =
+ (struct clock_control_regs *)CCM_BASE;
+
+ /* start the required I2C clock */
+ writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET),
+ &sc_regs->cgr0);
+#endif
+
+ /* Divider value calculation */
+ i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
+ div = (i2c_clk_rate + rate - 1) / rate;
+ if (div < i2c_clk_div[0][0])
+ clk_div = 0;
+ else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
+ clk_div = ARRAY_SIZE(i2c_clk_div) - 1;
+ else
+ for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++)
+ ;
+
+ /* Store divider value */
+ return clk_div;
+}
+
+/*
+ * Set I2C Bus speed
+ */
+static int bus_i2c_set_bus_speed(void *base, int speed)
+{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
+ u8 clk_idx = i2c_imx_get_clk(speed);
+ u8 idx = i2c_clk_div[clk_idx][1];
+
+ /* Store divider value */
+ writeb(idx, &i2c_regs->ifdr);
+
+ /* Reset module */
+ writeb(I2CR_IDIS, &i2c_regs->i2cr);
+ writeb(0, &i2c_regs->i2sr);
+ return 0;
+}
+
+#define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
+#define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
+#define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
+
+static int wait_for_sr_state(struct mxc_i2c_regs *i2c_regs, unsigned state)
+{
+ unsigned sr;
+ ulong elapsed;
+ ulong start_time = get_timer(0);
+ for (;;) {
+ sr = readb(&i2c_regs->i2sr);
+ if (sr & I2SR_IAL) {
+#ifdef I2C_QUIRK_REG
+ writeb(sr | I2SR_IAL, &i2c_regs->i2sr);
+#else
+ writeb(sr & ~I2SR_IAL, &i2c_regs->i2sr);
+#endif
+ printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
+ __func__, sr, readb(&i2c_regs->i2cr), state);
+ return -ERESTART;
+ }
+ if ((sr & (state >> 8)) == (unsigned char)state)
+ return sr;
+ WATCHDOG_RESET();
+ elapsed = get_timer(start_time);
+ if (elapsed > (CONFIG_SYS_HZ / 10)) /* .1 seconds */
+ break;
+ }
+ printf("%s: failed sr=%x cr=%x state=%x\n", __func__,
+ sr, readb(&i2c_regs->i2cr), state);
+ return -ETIMEDOUT;
+}
+
+static int tx_byte(struct mxc_i2c_regs *i2c_regs, u8 byte)
+{
+ int ret;
+
+ writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
+ writeb(byte, &i2c_regs->i2dr);
+ ret = wait_for_sr_state(i2c_regs, ST_IIF);
+ if (ret < 0)
+ return ret;
+ if (ret & I2SR_RX_NO_AK)
+ return -ENODEV;
+ return 0;
+}
+
+/*
+ * Stop I2C transaction
+ */
+static void i2c_imx_stop(struct mxc_i2c_regs *i2c_regs)
+{
+ int ret;
+ unsigned int temp = readb(&i2c_regs->i2cr);
+
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ writeb(temp, &i2c_regs->i2cr);
+ ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
+ if (ret < 0)
+ printf("%s:trigger stop failed\n", __func__);
+}
+
+/*
+ * Send start signal, chip address and
+ * write register address
+ */
+static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs,
+ uchar chip, uint addr, int alen)
+{
+ unsigned int temp;
+ int ret;
+
+ /* Enable I2C controller */
+#ifdef I2C_QUIRK_REG
+ if (readb(&i2c_regs->i2cr) & I2CR_IDIS) {
+#else
+ if (!(readb(&i2c_regs->i2cr) & I2CR_IEN)) {
+#endif
+ writeb(I2CR_IEN, &i2c_regs->i2cr);
+ /* Wait for controller to be stable */
+ udelay(50);
+ }
+ if (readb(&i2c_regs->iadr) == (chip << 1))
+ writeb((chip << 1) ^ 2, &i2c_regs->iadr);
+ writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
+ ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
+ if (ret < 0)
+ return ret;
+
+ /* Start I2C transaction */
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_MSTA;
+ writeb(temp, &i2c_regs->i2cr);
+
+ ret = wait_for_sr_state(i2c_regs, ST_BUS_BUSY);
+ if (ret < 0)
+ return ret;
+
+ temp |= I2CR_MTX | I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
+
+ /* write slave address */
+ ret = tx_byte(i2c_regs, chip << 1);
+ if (ret < 0)
+ return ret;
+
+ while (alen--) {
+ ret = tx_byte(i2c_regs, (addr >> (alen * 8)) & 0xff);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+}
+
+static int i2c_idle_bus(void *base);
+
+static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
+ uchar chip, uint addr, int alen)
+{
+ int retry;
+ int ret;
+ for (retry = 0; retry < 3; retry++) {
+ ret = i2c_init_transfer_(i2c_regs, chip, addr, alen);
+ if (ret >= 0)
+ return 0;
+ i2c_imx_stop(i2c_regs);
+ if (ret == -ENODEV)
+ return ret;
+
+ printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
+ retry);
+ if (ret != -ERESTART)
+ /* Disable controller */
+ writeb(I2CR_IDIS, &i2c_regs->i2cr);
+ udelay(100);
+ if (i2c_idle_bus(i2c_regs) < 0)
+ break;
+ }
+ printf("%s: give up i2c_regs=%p\n", __func__, i2c_regs);
+ return ret;
+}
+
+/*
+ * Read data from I2C device
+ */
+int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
+ int len)
+{
+ int ret;
+ unsigned int temp;
+ int i;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
+
+ ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
+ if (ret < 0)
+ return ret;
+
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_RSTA;
+ writeb(temp, &i2c_regs->i2cr);
+
+ ret = tx_byte(i2c_regs, (chip << 1) | 1);
+ if (ret < 0) {
+ i2c_imx_stop(i2c_regs);
+ return ret;
+ }
+
+ /* setup bus to read data */
+ temp = readb(&i2c_regs->i2cr);
+ temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
+ if (len == 1)
+ temp |= I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
+ writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
+ readb(&i2c_regs->i2dr); /* dummy read to clear ICF */
+
+ /* read data */
+ for (i = 0; i < len; i++) {
+ ret = wait_for_sr_state(i2c_regs, ST_IIF);
+ if (ret < 0) {
+ i2c_imx_stop(i2c_regs);
+ return ret;
+ }
+
+ /*
+ * It must generate STOP before read I2DR to prevent
+ * controller from generating another clock cycle
+ */
+ if (i == (len - 1)) {
+ i2c_imx_stop(i2c_regs);
+ } else if (i == (len - 2)) {
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
+ }
+ writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
+ buf[i] = readb(&i2c_regs->i2dr);
+ }
+ i2c_imx_stop(i2c_regs);
+ return 0;
+}
+
+/*
+ * Write data to I2C device
+ */
+int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
+ const uchar *buf, int len)
+{
+ int ret;
+ int i;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
+
+ ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < len; i++) {
+ ret = tx_byte(i2c_regs, buf[i]);
+ if (ret < 0)
+ break;
+ }
+ i2c_imx_stop(i2c_regs);
+ return ret;
+}
+
+struct i2c_parms {
+ void *base;
+ void *idle_bus_data;
+ int (*idle_bus_fn)(void *p);
+};
+
+struct sram_data {
+ unsigned curr_i2c_bus;
+ struct i2c_parms i2c_data[3];
+};
+
+static void * const i2c_bases[] = {
+#if defined(CONFIG_MX25)
+ (void *)IMX_I2C_BASE,
+ (void *)IMX_I2C2_BASE,
+ (void *)IMX_I2C3_BASE
+#elif defined(CONFIG_MX27)
+ (void *)IMX_I2C1_BASE,
+ (void *)IMX_I2C2_BASE
+#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
+ defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
+ defined(CONFIG_MX6)
+ (void *)I2C1_BASE_ADDR,
+ (void *)I2C2_BASE_ADDR,
+ (void *)I2C3_BASE_ADDR
+#elif defined(CONFIG_VF610)
+ (void *)I2C0_BASE_ADDR
+#else
+#error "architecture not supported"
+#endif
+};
+
+void *i2c_get_base(struct i2c_adapter *adap)
+{
+ return i2c_bases[adap->hwadapnr];
+}
+
+static struct i2c_parms *i2c_get_parms(void *base)
+{
+ struct sram_data *srdata = (void *)gd->srdata;
+ int i = 0;
+ struct i2c_parms *p = srdata->i2c_data;
+ while (i < ARRAY_SIZE(srdata->i2c_data)) {
+ if (p->base == base)
+ return p;
+ p++;
+ i++;
+ }
+ printf("Invalid I2C base: %p\n", base);
+ return NULL;
+}
+
+static int i2c_idle_bus(void *base)
+{
+ struct i2c_parms *p = i2c_get_parms(base);
+ if (p && p->idle_bus_fn)
+ return p->idle_bus_fn(p->idle_bus_data);
+ return 0;
+}
+
+static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
+{
+ return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
+}
+
+static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
+{
+ return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
+}
+
+/*
+ * Test if a chip at a given address responds (probe the chip)
+ */
+static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
+{
+ return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
+}
+
+void bus_i2c_init(void *base, int speed, int unused,
+ int (*idle_bus_fn)(void *p), void *idle_bus_data)
+{
+ struct sram_data *srdata = (void *)gd->srdata;
+ int i = 0;
+ struct i2c_parms *p = srdata->i2c_data;
+ if (!base)
+ return;
+ for (;;) {
+ if (!p->base || (p->base == base)) {
+ p->base = base;
+ if (idle_bus_fn) {
+ p->idle_bus_fn = idle_bus_fn;
+ p->idle_bus_data = idle_bus_data;
+ }
+ break;
+ }
+ p++;
+ i++;
+ if (i >= ARRAY_SIZE(srdata->i2c_data))
+ return;
+ }
+ bus_i2c_set_bus_speed(base, speed);
+}
+
+/*
+ * Init I2C Bus
+ */
+static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
+{
+ bus_i2c_init(i2c_get_base(adap), speed, slaveaddr, NULL, NULL);
+}
+
+/*
+ * Set I2C Speed
+ */
+static uint mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
+{
+ return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
+}
+
+/*
+ * Register mxc i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed,
+ CONFIG_SYS_MXC_I2C1_SPEED,
+ CONFIG_SYS_MXC_I2C1_SLAVE, 0)
+U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed,
+ CONFIG_SYS_MXC_I2C2_SPEED,
+ CONFIG_SYS_MXC_I2C2_SLAVE, 1)
+#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
+ defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
+ defined(CONFIG_MX6)
+U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed,
+ CONFIG_SYS_MXC_I2C3_SPEED,
+ CONFIG_SYS_MXC_I2C3_SLAVE, 2)
+#endif