Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 104 deletions

diff --git a/qemu/roms/u-boot/doc/README.sh b/qemu/roms/u-boot/doc/README.sh
deleted file mode 100644
index 6baee089e..000000000
--- a/qemu/roms/u-boot/doc/README.sh
+++ /dev/null
@@ -1,104 +0,0 @@
-
-U-Boot for Renesas SuperH
-	Last update 01/18/2008 by Nobuhiro Iwamatsu
-
-================================================================================
-0. What's this?
-	This file contains status information for the port of U-Boot to the
-	Renesas SuperH series of CPUs.
-
-================================================================================
-1. Overview
-	SuperH has an original boot loader. However, source code is dirty, and
-	maintenance is not done.
-	To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
-	started the porting to u-boot in 2007.
-
-================================================================================
-2. Supported CPUs
-
-	2.1. Renesas SH7750/SH7750R
-		This CPU has the SH4 core.
-
-	2.2. Renesas SH7722
-		This CPU has the SH4AL-DSP core.
-
-	2.3. Renesas SH7720
-		This CPU has the SH3 core.
-
-	2.4. Renesas SH7710/SH7712
-		This CPU has the SH3-DSP core and Ethernet controller.
-
-	2.5. Renesas SH7780
-		This CPU has the SH4A core.
-
-================================================================================
-3. Supported Boards
-
-	3.1. Hitachi UL MS7750SE01/MS7750RSE01
-		Board specific code is in board/ms7750se
-		To use this board, type "make ms7750se_config".
-		Support devices are :
-			- SCIF
-			- SDRAM
-			- NOR Flash
-			- Marubun PCMCIA
-
-	3.2. Hitachi UL MS7722SE01
-		Board specific code is in board/ms7722se
-		To use this board, type "make ms7722se_config".
-		Support devices are :
-			- SCIF
-			- SDRAM
-			- NOR Flash
-			- Marubun PCMCIA
-			- SMC91x ethernet
-
-	3.2. Hitachi UL MS7720ERP01
-		Board specific code is in board/ms7720se
-		To use this board, type "make ms7720se_config".
-		Support devices are :
-			- SCIF
-			- SDRAM
-			- NOR Flash
-			- Marubun PCMCIA
-
-	3.3. Renesas R7780MP
-		Board specific code is in board/r7780mp
-		To use this board, type "make r7780mp_config".
-		Support devices are :
-			- SCIF
-			- DDR-SDRAM
-			- NOR Flash
-			- Compact Flash
-			- ASIX ethernet
-			- SH7780 PCI bridge
-			- RTL8110 ethernet
-
-	** README **
-		In SuperH, S-record and binary of made u-boot work on the memory.
-		When u-boot is written in the flash, it is necessary to change the
-		address by using 'objcopy'.
-		ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
-
-================================================================================
-4. Compiler
-	You can use the following of u-boot to compile.
-		- SuperH Linux Open site
-			http://www.superh-linux.org/
-		- KPIT GNU tools
-			http://www.kpitgnutools.com/
-
-================================================================================
-5. Future
-	I plan to support the following CPUs and boards.
-		5.1. CPUs
-			- SH7751R(SH4)
-			- SH7785(SH4)
-
-		5.2. Boards
-			- Many boards ;-)
-
-================================================================================
-Copyright (c) 2007,2008
-    Nobuhiro Iwamatsu <iwamatsu@nigaur.org>