Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 78 deletions

diff --git a/qemu/roms/u-boot/doc/README.LED b/qemu/roms/u-boot/doc/README.LED
deleted file mode 100644
index c3bcb3ac8..000000000
--- a/qemu/roms/u-boot/doc/README.LED
+++ /dev/null
@@ -1,78 +0,0 @@
-Status LED
-========================================
-
-This README describes the status LED API.
-
-The API is defined by the include file include/status_led.h
-
-The first step is to define CONFIG_STATUS_LED in the board config file.
-
-If the LED support is only for a single board, define CONFIG_BOARD_SPECIFIC_LED
-in the board config file.
-
-At a minimum, these macros must be defined at
-STATUS_LED_BIT
-STATUS_LED_STATE
-STATUS_LED_PERIOD
-
-If there are multiple status LED's define
-STATUS_LED_BIT<n>
-STATUS_LED_STATE<n>
-STATUS_LED_PERIOD<n>
-
-Where <n> can a integer 1 through 3.
-
-STATUS_LED_BIT is passed into the __led_* functions to identify which LED is
-being acted on.  As such, the value choose must be unique with with respect to
-the other STATUS_LED_BIT's.  Mapping the value to a physical LED is the
-reponsiblity of the __led_* function.
-
-STATUS_LED_STATE is the initial state of the LED. It should be set to one of
-these values: STATUS_LED_OFF or STATUS_LED_ON.
-
-STATUS_LED_PERIOD is how long is the LED blink period.  This usually set to
-(CONFIG_SYS_HZ / <N>) where <N> is the frequency of the blink. Typical values
-range from 2 to 10.
-
-Some other LED macros
-
-STATUS_LED_BOOT is the LED to light when the board is booting.  This must be a
-valid STATUS_LED_BIT value.
-
-STATUS_LED_RED is the red LED.  It is used signal errors. This must be a valid
-STATUS_LED_BIT value. Other similar color LED's are STATUS_LED_YELLOW and
-STATUS_LED_BLUE.
-
-These board must define these functions
-
-__led_init is called once to initialize the LED to STATUS_LED_STATE. One time
-start up code should be placed here.
-
-__led_set is called to change the state of the LED.
-
-__led_toggle is called to toggle the current state of the LED.
-
-Colour LED
-========================================
-
-Colour LED's are at present only used by ARM.
-
-The functions names explain their purpose.
-
-coloured_LED_init
-red_LED_on
-red_LED_off
-green_LED_on
-green_LED_off
-yellow_LED_on
-yellow_LED_off
-blue_LED_on
-blue_LED_off
-
-These are weakly defined in arch/arm/lib/board.c to noops. Where applicable, define
-these functions in the board specific source.
-
-TBD : Describe older board dependent macros similar to what is done for
-CONFIG_TQM8xxL.
-
-TBD : Describe general support via asm/status_led.h