Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 257 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/common/spl/spl.c b/qemu/roms/u-boot/common/spl/spl.c
new file mode 100644
index 000000000..774fdad25
--- /dev/null
+++ b/qemu/roms/u-boot/common/spl/spl.c
@@ -0,0 +1,257 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+#include <asm/u-boot.h>
+#include <nand.h>
+#include <fat.h>
+#include <version.h>
+#include <i2c.h>
+#include <image.h>
+#include <malloc.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_UBOOT_START
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
+#endif
+#ifndef CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_MONITOR_LEN	(200 * 1024)
+#endif
+
+u32 *boot_params_ptr = NULL;
+struct spl_image_info spl_image;
+
+/* Define board data structure */
+static bd_t bdata __attribute__ ((section(".data")));
+
+/*
+ * Default function to determine if u-boot or the OS should
+ * be started. This implementation always returns 1.
+ *
+ * Please implement your own board specific funcion to do this.
+ *
+ * RETURN
+ * 0 to not start u-boot
+ * positive if u-boot should start
+ */
+#ifdef CONFIG_SPL_OS_BOOT
+__weak int spl_start_uboot(void)
+{
+	puts("SPL: Please implement spl_start_uboot() for your board\n");
+	puts("SPL: Direct Linux boot not active!\n");
+	return 1;
+}
+#endif
+
+/*
+ * Weak default function for board specific cleanup/preparation before
+ * Linux boot. Some boards/platforms might not need it, so just provide
+ * an empty stub here.
+ */
+__weak void spl_board_prepare_for_linux(void)
+{
+	/* Nothing to do! */
+}
+
+void spl_parse_image_header(const struct image_header *header)
+{
+	u32 header_size = sizeof(struct image_header);
+
+	if (image_get_magic(header) == IH_MAGIC) {
+		if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) {
+			/*
+			 * On some system (e.g. powerpc), the load-address and
+			 * entry-point is located at address 0. We can't load
+			 * to 0-0x40. So skip header in this case.
+			 */
+			spl_image.load_addr = image_get_load(header);
+			spl_image.entry_point = image_get_ep(header);
+			spl_image.size = image_get_data_size(header);
+		} else {
+			spl_image.entry_point = image_get_load(header);
+			/* Load including the header */
+			spl_image.load_addr = spl_image.entry_point -
+				header_size;
+			spl_image.size = image_get_data_size(header) +
+				header_size;
+		}
+		spl_image.os = image_get_os(header);
+		spl_image.name = image_get_name(header);
+		debug("spl: payload image: %.*s load addr: 0x%x size: %d\n",
+			sizeof(spl_image.name), spl_image.name,
+			spl_image.load_addr, spl_image.size);
+	} else {
+		/* Signature not found - assume u-boot.bin */
+		debug("mkimage signature not found - ih_magic = %x\n",
+			header->ih_magic);
+		/* Let's assume U-Boot will not be more than 200 KB */
+		spl_image.size = CONFIG_SYS_MONITOR_LEN;
+		spl_image.entry_point = CONFIG_SYS_UBOOT_START;
+		spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
+		spl_image.os = IH_OS_U_BOOT;
+		spl_image.name = "U-Boot";
+	}
+}
+
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(void);
+
+	image_entry_noargs_t image_entry =
+			(image_entry_noargs_t) spl_image->entry_point;
+
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
+	image_entry();
+}
+
+#ifdef CONFIG_SPL_RAM_DEVICE
+static void spl_ram_load_image(void)
+{
+	const struct image_header *header;
+
+	/*
+	 * Get the header.  It will point to an address defined by handoff
+	 * which will tell where the image located inside the flash. For
+	 * now, it will temporary fixed to address pointed by U-Boot.
+	 */
+	header = (struct image_header *)
+		(CONFIG_SYS_TEXT_BASE -	sizeof(struct image_header));
+
+	spl_parse_image_header(header);
+}
+#endif
+
+void board_init_r(gd_t *dummy1, ulong dummy2)
+{
+	u32 boot_device;
+	debug(">>spl:board_init_r()\n");
+
+#ifdef CONFIG_SYS_SPL_MALLOC_START
+	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
+			CONFIG_SYS_SPL_MALLOC_SIZE);
+#endif
+
+#ifndef CONFIG_PPC
+	/*
+	 * timer_init() does not exist on PPC systems. The timer is initialized
+	 * and enabled (decrementer) in interrupt_init() here.
+	 */
+	timer_init();
+#endif
+
+#ifdef CONFIG_SPL_BOARD_INIT
+	spl_board_init();
+#endif
+
+	boot_device = spl_boot_device();
+	debug("boot device - %d\n", boot_device);
+	switch (boot_device) {
+#ifdef CONFIG_SPL_RAM_DEVICE
+	case BOOT_DEVICE_RAM:
+		spl_ram_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		spl_mmc_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	case BOOT_DEVICE_NAND:
+		spl_nand_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_ONENAND_SUPPORT
+	case BOOT_DEVICE_ONENAND:
+		spl_onenand_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_NOR_SUPPORT
+	case BOOT_DEVICE_NOR:
+		spl_nor_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_YMODEM_SUPPORT
+	case BOOT_DEVICE_UART:
+		spl_ymodem_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case BOOT_DEVICE_SPI:
+		spl_spi_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_ETH_SUPPORT
+	case BOOT_DEVICE_CPGMAC:
+#ifdef CONFIG_SPL_ETH_DEVICE
+		spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
+#else
+		spl_net_load_image(NULL);
+#endif
+		break;
+#endif
+#ifdef CONFIG_SPL_USBETH_SUPPORT
+	case BOOT_DEVICE_USBETH:
+		spl_net_load_image("usb_ether");
+		break;
+#endif
+#ifdef CONFIG_SPL_USB_SUPPORT
+	case BOOT_DEVICE_USB:
+		spl_usb_load_image();
+		break;
+#endif
+#ifdef CONFIG_SPL_SATA_SUPPORT
+	case BOOT_DEVICE_SATA:
+		spl_sata_load_image();
+		break;
+#endif
+	default:
+		debug("SPL: Un-supported Boot Device\n");
+		hang();
+	}
+
+	switch (spl_image.os) {
+	case IH_OS_U_BOOT:
+		debug("Jumping to U-Boot\n");
+		break;
+#ifdef CONFIG_SPL_OS_BOOT
+	case IH_OS_LINUX:
+		debug("Jumping to Linux\n");
+		spl_board_prepare_for_linux();
+		jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR);
+#endif
+	default:
+		debug("Unsupported OS image.. Jumping nevertheless..\n");
+	}
+	jump_to_image_no_args(&spl_image);
+}
+
+/*
+ * This requires UART clocks to be enabled.  In order for this to work the
+ * caller must ensure that the gd pointer is valid.
+ */
+void preloader_console_init(void)
+{
+	gd->bd = &bdata;
+	gd->baudrate = CONFIG_BAUDRATE;
+
+	serial_init();		/* serial communications setup */
+
+	gd->have_console = 1;
+
+	puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
+			U_BOOT_TIME ")\n");
+#ifdef CONFIG_SPL_DISPLAY_PRINT
+	spl_display_print();
+#endif
+}