Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 729 deletions

diff --git a/qemu/roms/u-boot/common/cmd_flash.c b/qemu/roms/u-boot/common/cmd_flash.c
deleted file mode 100644
index 85d18bb2c..000000000
--- a/qemu/roms/u-boot/common/cmd_flash.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * FLASH support
- */
-#include <common.h>
-#include <command.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-#endif
-
-#if defined(CONFIG_CMD_MTDPARTS)
-#include <jffs2/jffs2.h>
-
-/* partition handling routines */
-int mtdparts_init(void);
-int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
-int find_dev_and_part(const char *id, struct mtd_device **dev,
-		u8 *part_num, struct part_info **part);
-#endif
-
-#ifndef CONFIG_SYS_NO_FLASH
-#include <flash.h>
-#include <mtd/cfi_flash.h>
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-/*
- * The user interface starts numbering for Flash banks with 1
- * for historical reasons.
- */
-
-/*
- * this routine looks for an abbreviated flash range specification.
- * the syntax is B:SF[-SL], where B is the bank number, SF is the first
- * sector to erase, and SL is the last sector to erase (defaults to SF).
- * bank numbers start at 1 to be consistent with other specs, sector numbers
- * start at zero.
- *
- * returns:	1	- correct spec; *pinfo, *psf and *psl are
- *			  set appropriately
- *		0	- doesn't look like an abbreviated spec
- *		-1	- looks like an abbreviated spec, but got
- *			  a parsing error, a number out of range,
- *			  or an invalid flash bank.
- */
-static int
-abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
-{
-	flash_info_t *fp;
-	int bank, first, last;
-	char *p, *ep;
-
-	if ((p = strchr (str, ':')) == NULL)
-		return 0;
-	*p++ = '\0';
-
-	bank = simple_strtoul (str, &ep, 10);
-	if (ep == str || *ep != '\0' ||
-		bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS ||
-		(fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
-		return -1;
-
-	str = p;
-	if ((p = strchr (str, '-')) != NULL)
-		*p++ = '\0';
-
-	first = simple_strtoul (str, &ep, 10);
-	if (ep == str || *ep != '\0' || first >= fp->sector_count)
-		return -1;
-
-	if (p != NULL) {
-		last = simple_strtoul (p, &ep, 10);
-		if (ep == p || *ep != '\0' ||
-			last < first || last >= fp->sector_count)
-			return -1;
-	} else {
-		last = first;
-	}
-
-	*pinfo = fp;
-	*psf = first;
-	*psl = last;
-
-	return 1;
-}
-
-/*
- * Take *addr in Flash and adjust it to fall on the end of its sector
- */
-int flash_sect_roundb (ulong *addr)
-{
-	flash_info_t *info;
-	ulong bank, sector_end_addr;
-	char found;
-	int i;
-
-	/* find the end addr of the sector where the *addr is */
-	found = 0;
-	for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS && !found; ++bank) {
-		info = &flash_info[bank];
-		for (i = 0; i < info->sector_count && !found; ++i) {
-			/* get the end address of the sector */
-			if (i == info->sector_count - 1) {
-				sector_end_addr = info->start[0] +
-								info->size - 1;
-			} else {
-				sector_end_addr = info->start[i+1] - 1;
-			}
-
-			if (*addr <= sector_end_addr &&
-						*addr >= info->start[i]) {
-				found = 1;
-				/* adjust *addr if necessary */
-				if (*addr < sector_end_addr)
-					*addr = sector_end_addr;
-			} /* sector */
-		} /* bank */
-	}
-	if (!found) {
-		/* error, address not in flash */
-		printf("Error: end address (0x%08lx) not in flash!\n", *addr);
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * This function computes the start and end addresses for both
- * erase and protect commands. The range of the addresses on which
- * either of the commands is to operate can be given in two forms:
- * 1. <cmd> start end - operate on <'start',  'end')
- * 2. <cmd> start +length - operate on <'start', start + length)
- * If the second form is used and the end address doesn't fall on the
- * sector boundary, than it will be adjusted to the next sector boundary.
- * If it isn't in the flash, the function will fail (return -1).
- * Input:
- *    arg1, arg2: address specification (i.e. both command arguments)
- * Output:
- *    addr_first, addr_last: computed address range
- * Return:
- *    1: success
- *   -1: failure (bad format, bad address).
-*/
-static int
-addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
-{
-	char *ep;
-	char len_used; /* indicates if the "start +length" form used */
-
-	*addr_first = simple_strtoul(arg1, &ep, 16);
-	if (ep == arg1 || *ep != '\0')
-		return -1;
-
-	len_used = 0;
-	if (arg2 && *arg2 == '+'){
-		len_used = 1;
-		++arg2;
-	}
-
-	*addr_last = simple_strtoul(arg2, &ep, 16);
-	if (ep == arg2 || *ep != '\0')
-		return -1;
-
-	if (len_used){
-		/*
-		 * *addr_last has the length, compute correct *addr_last
-		 * XXX watch out for the integer overflow! Right now it is
-		 * checked for in both the callers.
-		 */
-		*addr_last = *addr_first + *addr_last - 1;
-
-		/*
-		 * It may happen that *addr_last doesn't fall on the sector
-		 * boundary. We want to round such an address to the next
-		 * sector boundary, so that the commands don't fail later on.
-		 */
-
-		if (flash_sect_roundb(addr_last) > 0)
-			return -1;
-	} /* "start +length" from used */
-
-	return 1;
-}
-
-static int
-flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
-			int *s_first, int *s_last,
-			int *s_count )
-{
-	flash_info_t *info;
-	ulong bank;
-	int rcode = 0;
-
-	*s_count = 0;
-
-	for (bank=0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
-		s_first[bank] = -1;	/* first sector to erase	*/
-		s_last [bank] = -1;	/* last  sector to erase	*/
-	}
-
-	for (bank=0,info = &flash_info[0];
-	     (bank < CONFIG_SYS_MAX_FLASH_BANKS) && (addr_first <= addr_last);
-	     ++bank, ++info) {
-		ulong b_end;
-		int sect;
-		short s_end;
-
-		if (info->flash_id == FLASH_UNKNOWN) {
-			continue;
-		}
-
-		b_end = info->start[0] + info->size - 1;	/* bank end addr */
-		s_end = info->sector_count - 1;			/* last sector   */
-
-
-		for (sect=0; sect < info->sector_count; ++sect) {
-			ulong end;	/* last address in current sect	*/
-
-			end = (sect == s_end) ? b_end : info->start[sect + 1] - 1;
-
-			if (addr_first > end)
-				continue;
-			if (addr_last < info->start[sect])
-				continue;
-
-			if (addr_first == info->start[sect]) {
-				s_first[bank] = sect;
-			}
-			if (addr_last  == end) {
-				s_last[bank]  = sect;
-			}
-		}
-		if (s_first[bank] >= 0) {
-			if (s_last[bank] < 0) {
-				if (addr_last > b_end) {
-					s_last[bank] = s_end;
-				} else {
-					puts ("Error: end address"
-						" not on sector boundary\n");
-					rcode = 1;
-					break;
-				}
-			}
-			if (s_last[bank] < s_first[bank]) {
-				puts ("Error: end sector"
-					" precedes start sector\n");
-				rcode = 1;
-				break;
-			}
-			sect = s_last[bank];
-			addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
-			(*s_count) += s_last[bank] - s_first[bank] + 1;
-		} else if (addr_first >= info->start[0] && addr_first < b_end) {
-			puts ("Error: start address not on sector boundary\n");
-			rcode = 1;
-			break;
-		} else if (s_last[bank] >= 0) {
-			puts ("Error: cannot span across banks when they are"
-			       " mapped in reverse order\n");
-			rcode = 1;
-			break;
-		}
-	}
-
-	return rcode;
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-
-static int do_flinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-#ifndef CONFIG_SYS_NO_FLASH
-	ulong bank;
-#endif
-
-#ifdef CONFIG_HAS_DATAFLASH
-	dataflash_print_info();
-#endif
-
-#ifndef CONFIG_SYS_NO_FLASH
-	if (argc == 1) {	/* print info for all FLASH banks */
-		for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
-			printf ("\nBank # %ld: ", bank+1);
-
-			flash_print_info (&flash_info[bank]);
-		}
-		return 0;
-	}
-
-	bank = simple_strtoul(argv[1], NULL, 16);
-	if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
-		printf ("Only FLASH Banks # 1 ... # %d supported\n",
-			CONFIG_SYS_MAX_FLASH_BANKS);
-		return 1;
-	}
-	printf ("\nBank # %ld: ", bank);
-	flash_print_info (&flash_info[bank-1]);
-#endif /* CONFIG_SYS_NO_FLASH */
-	return 0;
-}
-
-static int do_flerase(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-#ifndef CONFIG_SYS_NO_FLASH
-	flash_info_t *info = NULL;
-	ulong bank, addr_first, addr_last;
-	int n, sect_first = 0, sect_last = 0;
-#if defined(CONFIG_CMD_MTDPARTS)
-	struct mtd_device *dev;
-	struct part_info *part;
-	u8 dev_type, dev_num, pnum;
-#endif
-	int rcode = 0;
-
-	if (argc < 2)
-		return CMD_RET_USAGE;
-
-	if (strcmp(argv[1], "all") == 0) {
-		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
-			printf ("Erase Flash Bank # %ld ", bank);
-			info = &flash_info[bank-1];
-			rcode = flash_erase (info, 0, info->sector_count-1);
-		}
-		return rcode;
-	}
-
-	if ((n = abbrev_spec(argv[1], &info, &sect_first, &sect_last)) != 0) {
-		if (n < 0) {
-			puts ("Bad sector specification\n");
-			return 1;
-		}
-		printf ("Erase Flash Sectors %d-%d in Bank # %zu ",
-			sect_first, sect_last, (info-flash_info)+1);
-		rcode = flash_erase(info, sect_first, sect_last);
-		return rcode;
-	}
-
-#if defined(CONFIG_CMD_MTDPARTS)
-	/* erase <part-id> - erase partition */
-	if ((argc == 2) && (mtd_id_parse(argv[1], NULL, &dev_type, &dev_num) == 0)) {
-		mtdparts_init();
-		if (find_dev_and_part(argv[1], &dev, &pnum, &part) == 0) {
-			if (dev->id->type == MTD_DEV_TYPE_NOR) {
-				bank = dev->id->num;
-				info = &flash_info[bank];
-				addr_first = part->offset + info->start[0];
-				addr_last = addr_first + part->size - 1;
-
-				printf ("Erase Flash Partition %s, "
-						"bank %ld, 0x%08lx - 0x%08lx ",
-						argv[1], bank, addr_first,
-						addr_last);
-
-				rcode = flash_sect_erase(addr_first, addr_last);
-				return rcode;
-			}
-
-			printf("cannot erase, not a NOR device\n");
-			return 1;
-		}
-	}
-#endif
-
-	if (argc != 3)
-		return CMD_RET_USAGE;
-
-	if (strcmp(argv[1], "bank") == 0) {
-		bank = simple_strtoul(argv[2], NULL, 16);
-		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
-			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CONFIG_SYS_MAX_FLASH_BANKS);
-			return 1;
-		}
-		printf ("Erase Flash Bank # %ld ", bank);
-		info = &flash_info[bank-1];
-		rcode = flash_erase (info, 0, info->sector_count-1);
-		return rcode;
-	}
-
-	if (addr_spec(argv[1], argv[2], &addr_first, &addr_last) < 0){
-		printf ("Bad address format\n");
-		return 1;
-	}
-
-	if (addr_first >= addr_last)
-		return CMD_RET_USAGE;
-
-	rcode = flash_sect_erase(addr_first, addr_last);
-	return rcode;
-#else
-	return 0;
-#endif /* CONFIG_SYS_NO_FLASH */
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-int flash_sect_erase (ulong addr_first, ulong addr_last)
-{
-	flash_info_t *info;
-	ulong bank;
-	int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
-	int erased = 0;
-	int planned;
-	int rcode = 0;
-
-	rcode = flash_fill_sect_ranges (addr_first, addr_last,
-					s_first, s_last, &planned );
-
-	if (planned && (rcode == 0)) {
-		for (bank=0,info = &flash_info[0];
-		     (bank < CONFIG_SYS_MAX_FLASH_BANKS) && (rcode == 0);
-		     ++bank, ++info) {
-			if (s_first[bank]>=0) {
-				erased += s_last[bank] - s_first[bank] + 1;
-				debug ("Erase Flash from 0x%08lx to 0x%08lx "
-					"in Bank # %ld ",
-					info->start[s_first[bank]],
-					(s_last[bank] == info->sector_count) ?
-						info->start[0] + info->size - 1:
-						info->start[s_last[bank]+1] - 1,
-					bank+1);
-				rcode = flash_erase (info, s_first[bank], s_last[bank]);
-			}
-		}
-		if (rcode == 0)
-			printf("Erased %d sectors\n", erased);
-	} else if (rcode == 0) {
-		puts ("Error: start and/or end address"
-			" not on sector boundary\n");
-		rcode = 1;
-	}
-	return rcode;
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-
-static int do_protect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int rcode = 0;
-#ifndef CONFIG_SYS_NO_FLASH
-	flash_info_t *info = NULL;
-	ulong bank;
-	int i, n, sect_first = 0, sect_last = 0;
-#if defined(CONFIG_CMD_MTDPARTS)
-	struct mtd_device *dev;
-	struct part_info *part;
-	u8 dev_type, dev_num, pnum;
-#endif
-#endif /* CONFIG_SYS_NO_FLASH */
-#ifdef CONFIG_HAS_DATAFLASH
-	int status;
-#endif
-#if !defined(CONFIG_SYS_NO_FLASH) || defined(CONFIG_HAS_DATAFLASH)
-	int p;
-	ulong addr_first, addr_last;
-#endif
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-#if !defined(CONFIG_SYS_NO_FLASH) || defined(CONFIG_HAS_DATAFLASH)
-	if (strcmp(argv[1], "off") == 0)
-		p = 0;
-	else if (strcmp(argv[1], "on") == 0)
-		p = 1;
-	else
-		return CMD_RET_USAGE;
-#endif
-
-#ifdef CONFIG_HAS_DATAFLASH
-	if ((strcmp(argv[2], "all") != 0) && (strcmp(argv[2], "bank") != 0)) {
-		addr_first = simple_strtoul(argv[2], NULL, 16);
-		addr_last  = simple_strtoul(argv[3], NULL, 16);
-
-		if (addr_dataflash(addr_first) && addr_dataflash(addr_last)) {
-			status = dataflash_real_protect(p,addr_first,addr_last);
-			if (status < 0){
-				puts ("Bad DataFlash sector specification\n");
-				return 1;
-			}
-			printf("%sProtect %d DataFlash Sectors\n",
-				p ? "" : "Un-", status);
-			return 0;
-		}
-	}
-#endif
-
-#ifndef CONFIG_SYS_NO_FLASH
-	if (strcmp(argv[2], "all") == 0) {
-		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
-			info = &flash_info[bank-1];
-			if (info->flash_id == FLASH_UNKNOWN) {
-				continue;
-			}
-			printf ("%sProtect Flash Bank # %ld\n",
-				p ? "" : "Un-", bank);
-
-			for (i=0; i<info->sector_count; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-				if (flash_real_protect(info, i, p))
-					rcode = 1;
-				putc ('.');
-#else
-				info->protect[i] = p;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-			}
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-			if (!rcode) puts (" done\n");
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-		}
-		return rcode;
-	}
-
-	if ((n = abbrev_spec(argv[2], &info, &sect_first, &sect_last)) != 0) {
-		if (n < 0) {
-			puts ("Bad sector specification\n");
-			return 1;
-		}
-		printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n",
-			p ? "" : "Un-", sect_first, sect_last,
-			(info-flash_info)+1);
-		for (i = sect_first; i <= sect_last; i++) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-			if (flash_real_protect(info, i, p))
-				rcode =  1;
-			putc ('.');
-#else
-			info->protect[i] = p;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-		}
-
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-		if (!rcode) puts (" done\n");
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-
-		return rcode;
-	}
-
-#if defined(CONFIG_CMD_MTDPARTS)
-	/* protect on/off <part-id> */
-	if ((argc == 3) && (mtd_id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
-		mtdparts_init();
-		if (find_dev_and_part(argv[2], &dev, &pnum, &part) == 0) {
-			if (dev->id->type == MTD_DEV_TYPE_NOR) {
-				bank = dev->id->num;
-				info = &flash_info[bank];
-				addr_first = part->offset + info->start[0];
-				addr_last = addr_first + part->size - 1;
-
-				printf ("%sProtect Flash Partition %s, "
-						"bank %ld, 0x%08lx - 0x%08lx\n",
-						p ? "" : "Un", argv[1],
-						bank, addr_first, addr_last);
-
-				rcode = flash_sect_protect (p, addr_first, addr_last);
-				return rcode;
-			}
-
-			printf("cannot %sprotect, not a NOR device\n",
-					p ? "" : "un");
-			return 1;
-		}
-	}
-#endif
-
-	if (argc != 4)
-		return CMD_RET_USAGE;
-
-	if (strcmp(argv[2], "bank") == 0) {
-		bank = simple_strtoul(argv[3], NULL, 16);
-		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
-			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CONFIG_SYS_MAX_FLASH_BANKS);
-			return 1;
-		}
-		printf ("%sProtect Flash Bank # %ld\n",
-			p ? "" : "Un-", bank);
-		info = &flash_info[bank-1];
-
-		if (info->flash_id == FLASH_UNKNOWN) {
-			puts ("missing or unknown FLASH type\n");
-			return 1;
-		}
-		for (i=0; i<info->sector_count; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-			if (flash_real_protect(info, i, p))
-				rcode =  1;
-			putc ('.');
-#else
-			info->protect[i] = p;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-		}
-
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-		if (!rcode) puts (" done\n");
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-
-		return rcode;
-	}
-
-	if (addr_spec(argv[2], argv[3], &addr_first, &addr_last) < 0){
-		printf("Bad address format\n");
-		return 1;
-	}
-
-	if (addr_first >= addr_last)
-		return CMD_RET_USAGE;
-
-	rcode = flash_sect_protect (p, addr_first, addr_last);
-#endif /* CONFIG_SYS_NO_FLASH */
-	return rcode;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
-{
-	flash_info_t *info;
-	ulong bank;
-	int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
-	int protected, i;
-	int planned;
-	int rcode;
-
-	rcode = flash_fill_sect_ranges( addr_first, addr_last, s_first, s_last, &planned );
-
-	protected = 0;
-
-	if (planned && (rcode == 0)) {
-		for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
-			if (info->flash_id == FLASH_UNKNOWN) {
-				continue;
-			}
-
-			if (s_first[bank]>=0 && s_first[bank]<=s_last[bank]) {
-				debug ("%sProtecting sectors %d..%d in bank %ld\n",
-					p ? "" : "Un-",
-					s_first[bank], s_last[bank], bank+1);
-				protected += s_last[bank] - s_first[bank] + 1;
-				for (i=s_first[bank]; i<=s_last[bank]; ++i) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-					if (flash_real_protect(info, i, p))
-						rcode = 1;
-					putc ('.');
-#else
-					info->protect[i] = p;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-				}
-			}
-		}
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-		puts (" done\n");
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-
-		printf ("%sProtected %d sectors\n",
-			p ? "" : "Un-", protected);
-	} else if (rcode == 0) {
-		puts ("Error: start and/or end address"
-			" not on sector boundary\n");
-		rcode = 1;
-	}
-	return rcode;
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-
-
-/**************************************************/
-#if defined(CONFIG_CMD_MTDPARTS)
-# define TMP_ERASE	"erase <part-id>\n    - erase partition\n"
-# define TMP_PROT_ON	"protect on <part-id>\n    - protect partition\n"
-# define TMP_PROT_OFF	"protect off <part-id>\n    - make partition writable\n"
-#else
-# define TMP_ERASE	/* empty */
-# define TMP_PROT_ON	/* empty */
-# define TMP_PROT_OFF	/* empty */
-#endif
-
-U_BOOT_CMD(
-	flinfo,    2,    1,    do_flinfo,
-	"print FLASH memory information",
-	"\n    - print information for all FLASH memory banks\n"
-	"flinfo N\n    - print information for FLASH memory bank # N"
-);
-
-U_BOOT_CMD(
-	erase,   3,   0,  do_flerase,
-	"erase FLASH memory",
-	"start end\n"
-	"    - erase FLASH from addr 'start' to addr 'end'\n"
-	"erase start +len\n"
-	"    - erase FLASH from addr 'start' to the end of sect "
-	"w/addr 'start'+'len'-1\n"
-	"erase N:SF[-SL]\n    - erase sectors SF-SL in FLASH bank # N\n"
-	"erase bank N\n    - erase FLASH bank # N\n"
-	TMP_ERASE
-	"erase all\n    - erase all FLASH banks"
-);
-
-U_BOOT_CMD(
-	protect,  4,  0,   do_protect,
-	"enable or disable FLASH write protection",
-	"on  start end\n"
-	"    - protect FLASH from addr 'start' to addr 'end'\n"
-	"protect on start +len\n"
-	"    - protect FLASH from addr 'start' to end of sect "
-	"w/addr 'start'+'len'-1\n"
-	"protect on  N:SF[-SL]\n"
-	"    - protect sectors SF-SL in FLASH bank # N\n"
-	"protect on  bank N\n    - protect FLASH bank # N\n"
-	TMP_PROT_ON
-	"protect on  all\n    - protect all FLASH banks\n"
-	"protect off start end\n"
-	"    - make FLASH from addr 'start' to addr 'end' writable\n"
-	"protect off start +len\n"
-	"    - make FLASH from addr 'start' to end of sect "
-	"w/addr 'start'+'len'-1 wrtable\n"
-	"protect off N:SF[-SL]\n"
-	"    - make sectors SF-SL writable in FLASH bank # N\n"
-	"protect off bank N\n    - make FLASH bank # N writable\n"
-	TMP_PROT_OFF
-	"protect off all\n    - make all FLASH banks writable"
-);
-
-#undef	TMP_ERASE
-#undef	TMP_PROT_ON
-#undef	TMP_PROT_OFF