Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

4 files changed, 295 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/ti/ti814x/Makefile b/qemu/roms/u-boot/board/ti/ti814x/Makefile
new file mode 100644
index 000000000..93155de53
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/ti814x/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y	:= mux.o
+endif
+
+obj-y	+= evm.o
diff --git a/qemu/roms/u-boot/board/ti/ti814x/evm.c b/qemu/roms/u-boot/board/ti/ti814x/evm.c
new file mode 100644
index 000000000..54b3dfb82
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/ti814x/evm.c
@@ -0,0 +1,188 @@
+/*
+ * evm.c
+ *
+ * Board functions for TI814x EVM
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <cpsw.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include "evm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+static const struct cmd_control evm_ddr2_cctrl_data = {
+	.cmd0csratio	= 0x80,
+	.cmd0iclkout	= 0x00,
+
+	.cmd1csratio	= 0x80,
+	.cmd1iclkout	= 0x00,
+
+	.cmd2csratio	= 0x80,
+	.cmd2iclkout	= 0x00,
+};
+
+static const struct emif_regs evm_ddr2_emif0_regs = {
+	.sdram_config			= 0x40801ab2,
+	.ref_ctrl			= 0x10000c30,
+	.sdram_tim1			= 0x0aaaf552,
+	.sdram_tim2			= 0x043631d2,
+	.sdram_tim3			= 0x00000327,
+	.emif_ddr_phy_ctlr_1		= 0x00000007
+};
+
+static const struct emif_regs evm_ddr2_emif1_regs = {
+	.sdram_config			= 0x40801ab2,
+	.ref_ctrl			= 0x10000c30,
+	.sdram_tim1			= 0x0aaaf552,
+	.sdram_tim2			= 0x043631d2,
+	.sdram_tim3			= 0x00000327,
+	.emif_ddr_phy_ctlr_1		= 0x00000007
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+	.dmm_lisa_map_0			= 0x00000000,
+	.dmm_lisa_map_1			= 0x00000000,
+	.dmm_lisa_map_2			= 0x806c0300,
+	.dmm_lisa_map_3			= 0x806c0300,
+};
+
+static const struct ddr_data evm_ddr2_data = {
+	.datardsratio0		= ((0x35<<10) | (0x35<<0)),
+	.datawdsratio0		= ((0x20<<10) | (0x20<<0)),
+	.datawiratio0		= ((0<<10) | (0<<0)),
+	.datagiratio0		= ((0<<10) | (0<<0)),
+	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
+	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
+};
+
+void set_uart_mux_conf(void)
+{
+	/* Set UART pins */
+	enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+	/* Set MMC pins */
+	enable_mmc1_pin_mux();
+
+	/* Set Ethernet pins */
+	enable_enet_pin_mux();
+}
+
+void sdram_init(void)
+{
+	config_dmm(&evm_lisa_map_regs);
+
+	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+		   &evm_ddr2_emif0_regs, 0);
+	config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+		   &evm_ddr2_emif1_regs, 1);
+}
+#endif
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	return 0;
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(1, 0, 0, -1, -1);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x50,
+		.sliver_reg_ofs	= 0x700,
+		.phy_addr	= 1,
+	},
+	{
+		.slave_reg_ofs	= 0x90,
+		.sliver_reg_ofs	= 0x740,
+		.phy_addr	= 0,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x100,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0x600,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x28,
+	.hw_stats_reg_ofs	= 0x400,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_1,
+};
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		printf("<ethaddr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+		else
+			printf("Unable to read MAC address. Set <ethaddr>\n");
+	}
+
+	return cpsw_register(&cpsw_data);
+}
diff --git a/qemu/roms/u-boot/board/ti/ti814x/evm.h b/qemu/roms/u-boot/board/ti/ti814x/evm.h
new file mode 100644
index 000000000..6aebec62d
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/ti814x/evm.h
@@ -0,0 +1,8 @@
+#ifndef _EVM_H
+#define _EVM_H
+
+void enable_uart0_pin_mux(void);
+void enable_mmc1_pin_mux(void);
+void enable_enet_pin_mux(void);
+
+#endif /* _EVM_H */
diff --git a/qemu/roms/u-boot/board/ti/ti814x/mux.c b/qemu/roms/u-boot/board/ti/ti814x/mux.c
new file mode 100644
index 000000000..fd9f36451
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/ti814x/mux.c
@@ -0,0 +1,86 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "evm.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(pincntl70), PULLUP_EN | MODE(0x01)},	/* UART0_RXD */
+	{OFFSET(pincntl71), PULLUP_EN | MODE(0x01)},	/* UART0_TXD */
+	{-1},
+};
+
+static struct module_pin_mux mmc1_pin_mux[] = {
+	{OFFSET(pincntl1), PULLUP_EN | MODE(0x01)},	/* SD1_CLK */
+	{OFFSET(pincntl2), PULLUP_EN | MODE(0x01)},	/* SD1_CMD */
+	{OFFSET(pincntl3), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[0] */
+	{OFFSET(pincntl4), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[1] */
+	{OFFSET(pincntl5), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[2] */
+	{OFFSET(pincntl6), PULLUP_EN | MODE(0x01)},	/* SD1_DAT[3] */
+	{OFFSET(pincntl74), PULLUP_EN | MODE(0x40)},	/* SD1_POW */
+	{OFFSET(pincntl75), MODE(0x40)},		/* SD1_SDWP */
+	{OFFSET(pincntl80), PULLUP_EN | MODE(0x02)},	/* SD1_SDCD */
+	{-1},
+};
+
+static struct module_pin_mux enet_pin_mux[] = {
+	{OFFSET(pincntl232), MODE(0x01)},		/* EMAC_RMREFCLK */
+	{OFFSET(pincntl233), PULLUP_EN | MODE(0x01)},	/* MDCLK */
+	{OFFSET(pincntl234), PULLUP_EN | MODE(0x01)},	/* MDIO */
+	{OFFSET(pincntl235), MODE(0x01)},		/* EMAC[0]_MTCLK */
+	{OFFSET(pincntl236), MODE(0x01)},		/* EMAC[0]_MCOL */
+	{OFFSET(pincntl237), MODE(0x01)},		/* EMAC[0]_MCRS */
+	{OFFSET(pincntl238), MODE(0x01)},		/* EMAC[0]_MRXER */
+	{OFFSET(pincntl239), MODE(0x01)},		/* EMAC[0]_MRCLK */
+	{OFFSET(pincntl240), MODE(0x01)},		/* EMAC[0]_MRXD[0] */
+	{OFFSET(pincntl241), MODE(0x01)},		/* EMAC[0]_MRXD[1] */
+	{OFFSET(pincntl242), MODE(0x01)},		/* EMAC[0]_MRXD[2] */
+	{OFFSET(pincntl243), MODE(0x01)},		/* EMAC[0]_MRXD[3] */
+	{OFFSET(pincntl244), MODE(0x01)},		/* EMAC[0]_MRXD[4] */
+	{OFFSET(pincntl245), MODE(0x01)},		/* EMAC[0]_MRXD[5] */
+	{OFFSET(pincntl246), MODE(0x01)},		/* EMAC[0]_MRXD[6] */
+	{OFFSET(pincntl247), MODE(0x01)},		/* EMAC[0]_MRXD[7] */
+	{OFFSET(pincntl248), MODE(0x01)},		/* EMAC[0]_MRXDV */
+	{OFFSET(pincntl249), MODE(0x01)},		/* EMAC[0]_GMTCLK */
+	{OFFSET(pincntl250), MODE(0x01)},		/* EMAC[0]_MTXD[0] */
+	{OFFSET(pincntl251), MODE(0x01)},		/* EMAC[0]_MTXD[1] */
+	{OFFSET(pincntl252), MODE(0x01)},		/* EMAC[0]_MTXD[2] */
+	{OFFSET(pincntl253), MODE(0x01)},		/* EMAC[0]_MTXD[3] */
+	{OFFSET(pincntl254), MODE(0x01)},		/* EMAC[0]_MTXD[4] */
+	{OFFSET(pincntl255), MODE(0x01)},		/* EMAC[0]_MTXD[5] */
+	{OFFSET(pincntl256), MODE(0x01)},		/* EMAC[0]_MTXD[6] */
+	{OFFSET(pincntl257), MODE(0x01)},		/* EMAC[0]_MTXD[7] */
+	{OFFSET(pincntl258), MODE(0x01)},		/* EMAC[0]_MTXEN */
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_mmc1_pin_mux(void)
+{
+	configure_module_pin_mux(mmc1_pin_mux);
+}
+
+void enable_enet_pin_mux(void)
+{
+	configure_module_pin_mux(enet_pin_mux);
+}