Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

4 files changed, 312 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/ti/omap5_uevm/Makefile b/qemu/roms/u-boot/board/ti/omap5_uevm/Makefile
new file mode 100644
index 000000000..b88ab8f51
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/omap5_uevm/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= evm.o
diff --git a/qemu/roms/u-boot/board/ti/omap5_uevm/README b/qemu/roms/u-boot/board/ti/omap5_uevm/README
new file mode 100644
index 000000000..970e2eceb
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/omap5_uevm/README
@@ -0,0 +1,25 @@
+Summary
+=======
+
+This document covers various features of the 'omap5_uevm' build and some
+related uses.
+
+eMMC boot partition use
+=======================
+
+It is possible, depending on SYSBOOT configuration to boot from the eMMC
+boot partitions using (name depending on documentation referenced)
+Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
+example we load MLO and u-boot.img from the build into DDR and then use
+'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
+set boot0 as the boot device.
+U-Boot # setenv autoload no
+U-Boot # usb start
+U-Boot # dhcp
+U-Boot # mmc dev 1 1
+U-Boot # tftp ${loadaddr} omap5uevm/MLO
+U-Boot # mmc write ${loadaddr} 0 100
+U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img
+U-Boot # mmc write ${loadaddr} 300 400
+U-Boot # mmc bootbus 1 2 0 2
+U-Boot # mmc partconf 1 1 1 0
diff --git a/qemu/roms/u-boot/board/ti/omap5_uevm/evm.c b/qemu/roms/u-boot/board/ti/omap5_uevm/evm.c
new file mode 100644
index 000000000..4666b38a7
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/omap5_uevm/evm.c
@@ -0,0 +1,221 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Aneesh V       <aneesh@ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <palmas.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <tca642x.h>
+
+#include "mux_data.h"
+
+#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+#include <sata.h>
+#include <usb.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#include <asm/arch/sata.h>
+
+#define DIE_ID_REG_BASE     (OMAP54XX_L4_CORE_BASE + 0x2000)
+#define DIE_ID_REG_OFFSET	0x200
+
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: OMAP5432 uEVM\n"
+};
+
+/**
+ * @brief tca642x_init - uEVM default values for the GPIO expander
+ * input reg, output reg, polarity reg, configuration reg
+ */
+struct tca642x_bank_info tca642x_init[] = {
+	{ .input_reg = 0x00,
+	  .output_reg = 0x04,
+	  .polarity_reg = 0x00,
+	  .configuration_reg = 0x80 },
+	{ .input_reg = 0x00,
+	  .output_reg = 0x00,
+	  .polarity_reg = 0x00,
+	  .configuration_reg = 0xff },
+	{ .input_reg = 0x00,
+	  .output_reg = 0x00,
+	  .polarity_reg = 0x00,
+	  .configuration_reg = 0x40 },
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	gpmc_init();
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
+	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+	tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	init_sata(0);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}
+
+#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+static void enable_host_clocks(void)
+{
+	int auxclk;
+	int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
+				OPTFCLKEN_HSIC480M_P3_CLK |
+				OPTFCLKEN_HSIC60M_P2_CLK |
+				OPTFCLKEN_HSIC480M_P2_CLK |
+				OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
+
+	/* Enable port 2 and 3 clocks*/
+	setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
+
+	/* Enable port 2 and 3 usb host ports tll clocks*/
+	setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
+			(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
+#ifdef CONFIG_USB_XHCI_OMAP
+	/* Enable the USB OTG Super speed clocks */
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
+			(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
+#endif
+
+	auxclk = readl((*prcm)->scrm_auxclk1);
+	/* Request auxilary clock */
+	auxclk |= AUXCLK_ENABLE_MASK;
+	writel(auxclk, (*prcm)->scrm_auxclk1);
+}
+#endif
+
+/**
+ * @brief misc_init_r - Configure EVM board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	int reg;
+	u32 id[4];
+
+#ifdef CONFIG_PALMAS_POWER
+	palmas_init_settings();
+#endif
+
+	reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
+
+	id[0] = readl(reg);
+	id[1] = readl(reg + 0x8);
+	id[2] = readl(reg + 0xC);
+	id[3] = readl(reg + 0x10);
+	usb_fake_mac_from_die_id(id);
+
+	return 0;
+}
+
+void set_muxconf_regs_essential(void)
+{
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
+		   sizeof(core_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
+		   sizeof(wkup_padconf_array_essential) /
+		   sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0, -1, -1);
+	omap_mmc_init(1, 0, 0, -1, -1);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI
+static struct omap_usbhs_board_data usbhs_bdata = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
+	.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	int ret;
+
+	enable_host_clocks();
+
+	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
+	if (ret < 0) {
+		puts("Failed to initialize ehci\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+	int ret;
+
+	ret = omap_ehci_hcd_stop();
+	return ret;
+}
+
+void usb_hub_reset_devices(int port)
+{
+	/* The LAN9730 needs to be reset after the port power has been set. */
+	if (port == 3) {
+		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
+		udelay(10);
+		gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
+	}
+}
+#endif
+
+#ifdef CONFIG_USB_XHCI_OMAP
+/**
+ * @brief board_usb_init - Configure EVM board specific configurations
+ * for the LDO's and clocks for the USB blocks.
+ *
+ * @return 0
+ */
+int board_usb_init(int index, enum usb_init_type init)
+{
+	int ret;
+#ifdef CONFIG_PALMAS_USB_SS_PWR
+	ret = palmas_enable_ss_ldo();
+#endif
+
+	enable_host_clocks();
+
+	return 0;
+}
+#endif
diff --git a/qemu/roms/u-boot/board/ti/omap5_uevm/mux_data.h b/qemu/roms/u-boot/board/ti/omap5_uevm/mux_data.h
new file mode 100644
index 000000000..de7ce9fe0
--- /dev/null
+++ b/qemu/roms/u-boot/board/ti/omap5_uevm/mux_data.h
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ *	Sricharan R		<r.sricharan@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _EVM5430_MUX_DATA_H
+#define _EVM5430_MUX_DATA_H
+
+#include <asm/arch/mux_omap5.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+	{EMMC_CLK, (PTU | IEN | M0)}, /*  EMMC_CLK   */
+	{EMMC_CMD, (PTU | IEN | M0)}, /*  EMMC_CMD   */
+	{EMMC_DATA0, (PTU | IEN | M0)}, /*  EMMC_DATA0 */
+	{EMMC_DATA1, (PTU | IEN | M0)}, /*  EMMC_DATA1 */
+	{EMMC_DATA2, (PTU | IEN | M0)}, /*  EMMC_DATA2 */
+	{EMMC_DATA3, (PTU | IEN | M0)}, /*  EMMC_DATA3 */
+	{EMMC_DATA4, (PTU | IEN | M0)}, /*  EMMC_DATA4 */
+	{EMMC_DATA5, (PTU | IEN | M0)}, /*  EMMC_DATA5 */
+	{EMMC_DATA6, (PTU | IEN | M0)}, /*  EMMC_DATA6 */
+	{EMMC_DATA7, (PTU | IEN | M0)}, /*  EMMC_DATA7 */
+	{SDCARD_CLK, (PTU | IEN | M0)}, /*  SDCARD_CLK  */
+	{SDCARD_CMD, (PTU | IEN | M0)}, /*  SDCARD_CMD  */
+	{SDCARD_DATA0, (PTU | IEN | M0)}, /*  SDCARD_DATA0*/
+	{SDCARD_DATA1, (PTU | IEN | M0)}, /*  SDCARD_DATA1*/
+	{SDCARD_DATA2, (PTU | IEN | M0)}, /*  SDCARD_DATA2*/
+	{SDCARD_DATA3, (PTU | IEN | M0)}, /*  SDCARD_DATA3*/
+	{UART3_RX_IRRX, (PTU | IEN | M0)}, /*  UART3_RX_IRRX    */
+	{UART3_TX_IRTX, (M0)},    /*  UART3_TX_IRTX    */
+	{USBB1_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB1_HSIC_STROBE */
+	{USBB1_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB1_HSIC_DATA */
+	{USBB2_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB2_HSIC_STROBE */
+	{USBB2_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB2_HSIC_DATA  */
+	{USBB3_HSIC_STROBE, (PTU | IEN | M0)},    /*  USBB3_HSIC_STROBE*/
+	{USBB3_HSIC_DATA, (PTU | IEN | M0)},    /*  USBB3_HSIC_DATA  */
+	{USBD0_HS_DP, (IEN | M0)},	/*  USBD0_HS_DP */
+	{USBD0_HS_DM, (IEN | M0)},	/*  USBD0_HS_DM */
+	{USBD0_SS_RX, (IEN | M0)},	/*  USBD0_SS_RX */
+	{I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */
+	{I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */
+	{HSI2_ACWAKE, (PTU | M6)},    /*  HSI2_ACWAKE */
+	{HSI2_CAFLAG, (PTU | M6)},    /*  HSI2_CAFLAG */
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+	{SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
+	{SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
+	{SYS_32K, (IEN | M0)}, /*  SYS_32K     */
+	{FREF_CLK1_OUT, (PTD | IEN | M0)},    /*  FREF_CLK1_OUT  */
+
+};
+
+#endif /* _EVM4430_MUX_DATA_H */