Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 259 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/sbc8641d/sbc8641d.c b/qemu/roms/u-boot/board/sbc8641d/sbc8641d.c
new file mode 100644
index 000000000..4906be488
--- /dev/null
+++ b/qemu/roms/u-boot/board/sbc8641d/sbc8641d.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ * Joe Hamman joe.hamman@embeddedspecialties.com
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_86xx.h>
+#include <asm/fsl_pci.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+long int fixed_sdram (void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("Board: Wind River SBC8641D\n");
+
+	return 0;
+}
+
+phys_size_t initdram (int board_type)
+{
+	long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = fsl_ddr_sdram();
+#else
+	dram_size = fixed_sdram ();
+#endif
+
+	debug ("    DDR: ");
+	return dram_size;
+}
+
+#if defined(CONFIG_SYS_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
+	uint *p;
+
+	puts ("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts ("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	puts ("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+long int fixed_sdram (void)
+{
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
+	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
+	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
+	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
+	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+
+	asm ("sync;isync");
+
+	udelay (500);
+
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
+	asm ("sync; isync");
+
+	udelay (500);
+	ddr = &immap->im_ddr2;
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
+	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
+	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
+	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
+	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
+	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
+	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
+	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
+	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
+	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
+
+	asm ("sync;isync");
+
+	udelay (500);
+
+	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
+	asm ("sync; isync");
+
+	udelay (500);
+#endif
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+#endif				/* !defined(CONFIG_SPD_EEPROM) */
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup (void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+	FT_FSL_PCI_SETUP;
+}
+#endif
+
+void sbc8641d_reset_board (void)
+{
+	puts ("Resetting board....\n");
+}
+
+/*
+ * get_board_sys_clk
+ *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
+ */
+
+unsigned long get_board_sys_clk (ulong dummy)
+{
+	int i;
+	ulong val = 0;
+
+	i = 5;
+	i &= 0x07;
+
+	switch (i) {
+	case 0:
+		val = 33000000;
+		break;
+	case 1:
+		val = 40000000;
+		break;
+	case 2:
+		val = 50000000;
+		break;
+	case 3:
+		val = 66000000;
+		break;
+	case 4:
+		val = 83000000;
+		break;
+	case 5:
+		val = 100000000;
+		break;
+	case 6:
+		val = 134000000;
+		break;
+	case 7:
+		val = 166000000;
+		break;
+	}
+
+	return val;
+}
+
+void board_reset(void)
+{
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	ulong addr = CONFIG_SYS_RESET_ADDRESS;
+
+	/* flush and disable I/D cache */
+	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
+	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
+	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
+	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 4");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 5");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * SRR0 has system reset vector, SRR1 has default MSR value
+	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
+	 */
+	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
+	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
+	__asm__ __volatile__ ("mtspr	27, 4");
+	__asm__ __volatile__ ("rfi");
+#endif
+}