Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

2 files changed, 438 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/samsung/trats2/Makefile b/qemu/roms/u-boot/board/samsung/trats2/Makefile
new file mode 100644
index 000000000..f501761a4
--- /dev/null
+++ b/qemu/roms/u-boot/board/samsung/trats2/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (c) 2000 - 2013 Samsung Electronics Co., Ltd. All rights reserved.
+# Sanghee Kim <sh0130.kim@samsung.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= trats2.o
diff --git a/qemu/roms/u-boot/board/samsung/trats2/trats2.c b/qemu/roms/u-boot/board/samsung/trats2/trats2.c
new file mode 100644
index 000000000..47095252a
--- /dev/null
+++ b/qemu/roms/u-boot/board/samsung/trats2/trats2.c
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved.
+ * Sanghee Kim <sh0130.kim@samsung.com>
+ * Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <asm/arch/mipi_dsim.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <power/battery.h>
+#include <power/max77693_pmic.h>
+#include <power/max77693_muic.h>
+#include <power/max77693_fg.h>
+#include <libtizen.h>
+#include <errno.h>
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <usb_mass_storage.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct exynos4x12_gpio_part1 *gpio1;
+static struct exynos4x12_gpio_part2 *gpio2;
+
+static unsigned int board_rev = -1;
+
+static inline u32 get_model_rev(void);
+
+static void check_hw_revision(void)
+{
+	int modelrev = 0;
+	int i;
+
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
+
+	/*
+	 * GPM1[1:0]: MODEL_REV[1:0]
+	 * Don't set as pull-none for these N/C pin.
+	 * TRM say that it may cause unexcepted state and leakage current.
+	 * and pull-none is only for output function.
+	 */
+	for (i = 0; i < 2; i++)
+		s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+
+	/* GPM1[5:2]: HW_REV[3:0] */
+	for (i = 2; i < 6; i++) {
+		s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+		s5p_gpio_set_pull(&gpio2->m1, i, GPIO_PULL_NONE);
+	}
+
+	/* GPM1[1:0]: MODEL_REV[1:0] */
+	for (i = 0; i < 2; i++)
+		modelrev |= (s5p_gpio_get_value(&gpio2->m1, i) << i);
+
+	/* board_rev[15:8] = model */
+	board_rev = modelrev << 8;
+}
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static inline u32 get_model_rev(void)
+{
+	return (board_rev >> 8) & 0xff;
+}
+
+static void board_external_gpio_init(void)
+{
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
+
+	/*
+	 * some pins which in alive block are connected with external pull-up
+	 * but it's default setting is pull-down.
+	 * if that pin set as input then that floated
+	 */
+
+	s5p_gpio_set_pull(&gpio2->x0, 2, GPIO_PULL_NONE);	/* PS_ALS_INT */
+	s5p_gpio_set_pull(&gpio2->x0, 4, GPIO_PULL_NONE);	/* TSP_nINT */
+	s5p_gpio_set_pull(&gpio2->x0, 7, GPIO_PULL_NONE);	/* AP_PMIC_IRQ*/
+	s5p_gpio_set_pull(&gpio2->x1, 5, GPIO_PULL_NONE);	/* IF_PMIC_IRQ*/
+	s5p_gpio_set_pull(&gpio2->x2, 0, GPIO_PULL_NONE);	/* VOL_UP */
+	s5p_gpio_set_pull(&gpio2->x2, 1, GPIO_PULL_NONE);	/* VOL_DOWN */
+	s5p_gpio_set_pull(&gpio2->x2, 3, GPIO_PULL_NONE);	/* FUEL_ALERT */
+	s5p_gpio_set_pull(&gpio2->x2, 4, GPIO_PULL_NONE);	/* ADC_INT */
+	s5p_gpio_set_pull(&gpio2->x2, 7, GPIO_PULL_NONE);	/* nPOWER */
+	s5p_gpio_set_pull(&gpio2->x3, 0, GPIO_PULL_NONE);	/* WPC_INT */
+	s5p_gpio_set_pull(&gpio2->x3, 5, GPIO_PULL_NONE);	/* OK_KEY */
+	s5p_gpio_set_pull(&gpio2->x3, 7, GPIO_PULL_NONE);	/* HDMI_HPD */
+}
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+static void board_init_i2c(void)
+{
+	int err;
+
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+	gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
+
+	/* I2C_7 */
+	err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("I2C%d not configured\n", (I2C_7));
+		return;
+	}
+
+	/* I2C_8 */
+	s5p_gpio_direction_output(&gpio1->f1, 4, 1);
+	s5p_gpio_direction_output(&gpio1->f1, 5, 1);
+
+	/* I2C_9 */
+	s5p_gpio_direction_output(&gpio2->m2, 1, 1);
+	s5p_gpio_direction_output(&gpio2->m2, 0, 1);
+}
+#endif
+
+#ifdef CONFIG_SYS_I2C_SOFT
+int get_soft_i2c_scl_pin(void)
+{
+	if (I2C_ADAP_HWNR)
+		return exynos4x12_gpio_get(2, m2, 1); /* I2C9 */
+	else
+		return exynos4x12_gpio_get(1, f1, 4); /* I2C8 */
+}
+
+int get_soft_i2c_sda_pin(void)
+{
+	if (I2C_ADAP_HWNR)
+		return exynos4x12_gpio_get(2, m2, 0); /* I2C9 */
+	else
+		return exynos4x12_gpio_get(1, f1, 5); /* I2C8 */
+}
+#endif
+
+int exynos_early_init_f(void)
+{
+	board_external_gpio_init();
+
+	return 0;
+}
+
+static int pmic_init_max77686(void);
+
+int exynos_init(void)
+{
+	struct exynos4_power *pwr =
+		(struct exynos4_power *)samsung_get_base_power();
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%04x\n", board_rev);
+
+	/*
+	 * First bootloader on the TRATS2 platform uses
+	 * INFORM4 and INFORM5 registers for recovery
+	 *
+	 * To indicate correct boot chain - those two
+	 * registers must be cleared out
+	 */
+	writel(0, &pwr->inform4);
+	writel(0, &pwr->inform5);
+
+	return 0;
+}
+
+int exynos_power_init(void)
+{
+	int chrg;
+	struct power_battery *pb;
+	struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	board_init_i2c();
+#endif
+	pmic_init(I2C_7);		/* I2C adapter 7 - bus name s3c24x0_7 */
+	pmic_init_max77686();
+	pmic_init_max77693(I2C_10);	/* I2C adapter 10 - bus name soft1 */
+	power_muic_init(I2C_10);	/* I2C adapter 10 - bus name soft1 */
+	power_fg_init(I2C_9);		/* I2C adapter 9 - bus name soft0 */
+	power_bat_init(0);
+
+	p_chrg = pmic_get("MAX77693_PMIC");
+	if (!p_chrg) {
+		puts("MAX77693_PMIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_muic = pmic_get("MAX77693_MUIC");
+	if (!p_muic) {
+		puts("MAX77693_MUIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_fg = pmic_get("MAX77693_FG");
+	if (!p_fg) {
+		puts("MAX17042_FG: Not found\n");
+		return -ENODEV;
+	}
+
+	if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0)
+		puts("No battery detected\n");
+
+	p_bat = pmic_get("BAT_TRATS2");
+	if (!p_bat) {
+		puts("BAT_TRATS2: Not found\n");
+		return -ENODEV;
+	}
+
+	p_fg->parent =  p_bat;
+	p_chrg->parent = p_bat;
+	p_muic->parent = p_bat;
+
+	p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
+
+	pb = p_bat->pbat;
+	chrg = p_muic->chrg->chrg_type(p_muic);
+	debug("CHARGER TYPE: %d\n", chrg);
+
+	if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
+		puts("No battery detected\n");
+		return -1;
+	}
+
+	p_fg->fg->fg_battery_check(p_fg, p_bat);
+
+	if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
+		puts("CHARGE Battery !\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+	int ret = 0;
+	unsigned int val;
+	struct pmic *p, *p_pmic, *p_muic;
+
+	p_pmic = pmic_get("MAX77686_PMIC");
+	if (!p_pmic)
+		return -ENODEV;
+
+	if (pmic_probe(p_pmic))
+		return -1;
+
+	p_muic = pmic_get("MAX77693_MUIC");
+	if (!p_muic)
+		return -ENODEV;
+
+	if (pmic_probe(p_muic))
+		return -1;
+
+	if (on) {
+		ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+		if (ret)
+			return -1;
+
+		p = pmic_get("MAX77693_PMIC");
+		if (!p)
+			return -ENODEV;
+
+		if (pmic_probe(p))
+			return -1;
+
+		/* SAFEOUT */
+		ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
+		if (ret)
+			return -1;
+
+		val |= MAX77693_ENSAFEOUT1;
+		ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
+		if (ret)
+			return -1;
+
+		/* PATH: USB */
+		ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+			MAX77693_MUIC_CTRL1_DN1DP2);
+
+	} else {
+		ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+		if (ret)
+			return -1;
+
+		/* PATH: UART */
+		ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
+			MAX77693_MUIC_CTRL1_UT1UR2);
+	}
+
+	if (ret)
+		return -1;
+
+	return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+	.phy_control	= s5pc210_phy_control,
+	.regs_phy	= EXYNOS4X12_USBPHY_BASE,
+	.regs_otg	= EXYNOS4X12_USBOTG_BASE,
+	.usb_phy_ctrl	= EXYNOS4X12_USBPHY_CONTROL,
+	.usb_flags	= PHY0_SLEEP,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	debug("USB_udc_probe\n");
+	return s3c_udc_probe(&s5pc210_otg_data);
+}
+
+int g_dnl_board_usb_cable_connected(void)
+{
+	struct pmic *muic = pmic_get("MAX77693_MUIC");
+	if (!muic)
+		return 0;
+
+	return !!muic->chrg->chrg_type(muic);
+}
+#endif
+
+static int pmic_init_max77686(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	if (pmic_probe(p))
+		return -1;
+
+	/* BUCK/LDO Output Voltage */
+	max77686_set_ldo_voltage(p, 21, 2800000);	/* LDO21 VTF_2.8V */
+	max77686_set_ldo_voltage(p, 23, 3300000);	/* LDO23 TSP_AVDD_3.3V*/
+	max77686_set_ldo_voltage(p, 24, 1800000);	/* LDO24 TSP_VDD_1.8V */
+
+	/* BUCK/LDO Output Mode */
+	max77686_set_buck_mode(p, 1, OPMODE_STANDBY);	/* BUCK1 VMIF_1.1V_AP */
+	max77686_set_buck_mode(p, 2, OPMODE_ON);	/* BUCK2 VARM_1.0V_AP */
+	max77686_set_buck_mode(p, 3, OPMODE_ON);	/* BUCK3 VINT_1.0V_AP */
+	max77686_set_buck_mode(p, 4, OPMODE_ON);	/* BUCK4 VG3D_1.0V_AP */
+	max77686_set_buck_mode(p, 5, OPMODE_ON);	/* BUCK5 VMEM_1.2V_AP */
+	max77686_set_buck_mode(p, 6, OPMODE_ON);	/* BUCK6 VCC_SUB_1.35V*/
+	max77686_set_buck_mode(p, 7, OPMODE_ON);	/* BUCK7 VCC_SUB_2.0V */
+	max77686_set_buck_mode(p, 8, OPMODE_OFF);	/* VMEM_VDDF_2.85V */
+	max77686_set_buck_mode(p, 9, OPMODE_OFF);	/* CAM_ISP_CORE_1.2V*/
+
+	max77686_set_ldo_mode(p, 1, OPMODE_LPM);	/* LDO1 VALIVE_1.0V_AP*/
+	max77686_set_ldo_mode(p, 2, OPMODE_STANDBY);	/* LDO2 VM1M2_1.2V_AP */
+	max77686_set_ldo_mode(p, 3, OPMODE_LPM);	/* LDO3 VCC_1.8V_AP */
+	max77686_set_ldo_mode(p, 4, OPMODE_LPM);	/* LDO4 VCC_2.8V_AP */
+	max77686_set_ldo_mode(p, 5, OPMODE_OFF);	/* LDO5_VCC_1.8V_IO */
+	max77686_set_ldo_mode(p, 6, OPMODE_STANDBY);	/* LDO6 VMPLL_1.0V_AP */
+	max77686_set_ldo_mode(p, 7, OPMODE_STANDBY);	/* LDO7 VPLL_1.0V_AP */
+	max77686_set_ldo_mode(p, 8, OPMODE_LPM);	/* LDO8 VMIPI_1.0V_AP */
+	max77686_set_ldo_mode(p, 9, OPMODE_OFF);	/* CAM_ISP_MIPI_1.2*/
+	max77686_set_ldo_mode(p, 10, OPMODE_LPM);	/* LDO10 VMIPI_1.8V_AP*/
+	max77686_set_ldo_mode(p, 11, OPMODE_STANDBY);	/* LDO11 VABB1_1.8V_AP*/
+	max77686_set_ldo_mode(p, 12, OPMODE_LPM);	/* LDO12 VUOTG_3.0V_AP*/
+	max77686_set_ldo_mode(p, 13, OPMODE_OFF);	/* LDO13 VC2C_1.8V_AP */
+	max77686_set_ldo_mode(p, 14, OPMODE_STANDBY);	/* VABB02_1.8V_AP */
+	max77686_set_ldo_mode(p, 15, OPMODE_STANDBY);	/* LDO15 VHSIC_1.0V_AP*/
+	max77686_set_ldo_mode(p, 16, OPMODE_STANDBY);	/* LDO16 VHSIC_1.8V_AP*/
+	max77686_set_ldo_mode(p, 17, OPMODE_OFF);	/* CAM_SENSOR_CORE_1.2*/
+	max77686_set_ldo_mode(p, 18, OPMODE_OFF);	/* CAM_ISP_SEN_IO_1.8V*/
+	max77686_set_ldo_mode(p, 19, OPMODE_OFF);	/* LDO19 VT_CAM_1.8V */
+	max77686_set_ldo_mode(p, 20, OPMODE_ON);	/* LDO20 VDDQ_PRE_1.8V*/
+	max77686_set_ldo_mode(p, 21, OPMODE_OFF);	/* LDO21 VTF_2.8V */
+	max77686_set_ldo_mode(p, 22, OPMODE_OFF);	/* LDO22 VMEM_VDD_2.8V*/
+	max77686_set_ldo_mode(p, 23, OPMODE_OFF);	/* LDO23 TSP_AVDD_3.3V*/
+	max77686_set_ldo_mode(p, 24, OPMODE_OFF);	/* LDO24 TSP_VDD_1.8V */
+	max77686_set_ldo_mode(p, 25, OPMODE_OFF);	/* LDO25 VCC_3.3V_LCD */
+	max77686_set_ldo_mode(p, 26, OPMODE_OFF);	/*LDO26 VCC_3.0V_MOTOR*/
+
+	return 0;
+}
+
+/*
+ * LCD
+ */
+
+#ifdef CONFIG_LCD
+int mipi_power(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	/* LDO8 VMIPI_1.0V_AP */
+	max77686_set_ldo_mode(p, 8, OPMODE_ON);
+	/* LDO10 VMIPI_1.8V_AP */
+	max77686_set_ldo_mode(p, 10, OPMODE_ON);
+
+	return 0;
+}
+
+void exynos_lcd_power_on(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	/* LCD_2.2V_EN: GPC0[1] */
+	s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
+	s5p_gpio_direction_output(&gpio1->c0, 1, 1);
+
+	/* LDO25 VCC_3.1V_LCD */
+	pmic_probe(p);
+	max77686_set_ldo_voltage(p, 25, 3100000);
+	max77686_set_ldo_mode(p, 25, OPMODE_LPM);
+}
+
+void exynos_reset_lcd(void)
+{
+	gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	/* reset lcd */
+	s5p_gpio_direction_output(&gpio1->f2, 1, 0);
+	udelay(10);
+	s5p_gpio_set_value(&gpio1->f2, 1, 1);
+}
+
+void exynos_lcd_misc_init(vidinfo_t *vid)
+{
+#ifdef CONFIG_TIZEN
+	get_tizen_logo_info(vid);
+#endif
+#ifdef CONFIG_S6E8AX0
+	s6e8ax0_init();
+#endif
+}
+#endif /* LCD */