Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 192 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/samsung/goni/goni.c b/qemu/roms/u-boot/board/samsung/goni/goni.c
new file mode 100644
index 000000000..61b9ece03
--- /dev/null
+++ b/qemu/roms/u-boot/board/samsung/goni/goni.c
@@ -0,0 +1,192 @@
+/*
+ *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <power/max8998_pmic.h>
+#include <samsung/misc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct s5pc110_gpio *s5pc110_gpio;
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Set Initial global variables */
+	s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
+
+	gd->bd->bi_arch_number = MACH_TYPE_GONI;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int power_init_board(void)
+{
+	int ret;
+
+	/*
+	 * For PMIC the I2C bus is named as I2C5, but it is connected
+	 * to logical I2C adapter 0
+	 */
+	ret = pmic_init(I2C_0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
+			PHYS_SDRAM_3_SIZE;
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tGoni\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret, ret_sd = 0;
+
+	/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
+	s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+
+	/*
+	 * MMC0 GPIO
+	 * GPG0[0]	SD_0_CLK
+	 * GPG0[1]	SD_0_CMD
+	 * GPG0[2]	SD_0_CDn	-> Not used
+	 * GPG0[3:6]	SD_0_DATA[0:3]
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPG0[0:6] special function 2 */
+		s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+		/* GPG0[0:6] pull disable */
+		s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+		/* GPG0[0:6] drv 4x */
+		s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+	}
+
+	ret = s5p_mmc_init(0, 4);
+	if (ret)
+		error("MMC: Failed to init MMC:0.\n");
+
+	/*
+	 * SD card (T_FLASH) detect and init
+	 * T_FLASH_DETECT: EINT28: GPH3[4] input mode
+	 */
+	s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
+	s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+
+	if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+
+			/* GPG2[0:6] special function 2 */
+			s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+			/* GPG2[0:6] pull disable */
+			s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+			/* GPG2[0:6] drv 4x */
+			s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+		}
+
+		ret_sd = s5p_mmc_init(2, 4);
+		if (ret_sd)
+			error("MMC: Failed to init SD card (MMC:2).\n");
+	}
+
+	return ret & ret_sd;
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc1xx_phy_control(int on)
+{
+	int ret;
+	static int status;
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (on && !status) {
+		ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+				      MAX8998_LDO3, LDO_ON);
+		ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+				      MAX8998_LDO8, LDO_ON);
+		if (ret) {
+			puts("MAX8998 LDO setting error!\n");
+			return -1;
+		}
+		status = 1;
+	} else if (!on && status) {
+		ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
+				      MAX8998_LDO3, LDO_OFF);
+		ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
+				      MAX8998_LDO8, LDO_OFF);
+		if (ret) {
+			puts("MAX8998 LDO setting error!\n");
+			return -1;
+		}
+		status = 0;
+	}
+	udelay(10000);
+
+	return 0;
+}
+
+struct s3c_plat_otg_data s5pc110_otg_data = {
+	.phy_control = s5pc1xx_phy_control,
+	.regs_phy = S5PC110_PHY_BASE,
+	.regs_otg = S5PC110_OTG_BASE,
+	.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
+};
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	set_board_info();
+#endif
+	return 0;
+}
+#endif