Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

7 files changed, 1092 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/Makefile b/qemu/roms/u-boot/board/renesas/sh7785lcr/Makefile
new file mode 100644
index 000000000..e8cfb053c
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2008  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= sh7785lcr.o selfcheck.o rtl8169_mac.o
+obj-y	+= lowlevel_init.o
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/README.sh7785lcr b/qemu/roms/u-boot/board/renesas/sh7785lcr/README.sh7785lcr
new file mode 100644
index 000000000..56455fc16
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/README.sh7785lcr
@@ -0,0 +1,123 @@
+========================================
+Renesas Technology R0P7785LC0011RL board
+========================================
+
+This board specification:
+=========================
+
+The R0P7785LC0011RL(board config name:sh7785lcr) has the following device:
+
+ - SH7785 (SH-4A)
+ - DDR2-SDRAM 512MB
+ - NOR Flash 64MB
+ - 2D Graphic controller
+ - SATA controller
+ - Ethernet controller
+ - USB host/peripheral controller
+ - SD controller
+ - I2C controller
+ - RTC
+
+This board has 2 physical memory maps. It can be changed with DIP switch(S2-5).
+
+ phys address			| S2-5 = OFF	| S2-5 = ON
+ -------------------------------+---------------+---------------
+ 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+
+
+configuration for This board:
+=============================
+
+You can choose configuration as follows:
+
+ - make sh7785lcr_config
+ - make sh7785lcr_32bit_config
+
+When you use "make sh7785lcr_config", there is build U-Boot for 29-bit
+address mode. This mode can use 128MB DDR-SDRAM.
+
+When you use "make sh7785lcr_32bit_config", there is build U-Boot for 32-bit
+extended address mode. This mode can use 384MB DDR-SDRAM. And if you run
+"pmb" command, this mode can use 512MB DDR-SDRAM.
+
+ * 32-bit extended address mode PMB mapping *
+  a) on start-up
+   virt		| phys		| size		| device
+   -------------+---------------+---------------+---------------
+   0x88000000	| 0x48000000	| 384MB		| DDR-SDRAM (Cacheable)
+   0xa0000000	| 0x00000000	| 64MB		| NOR Flash
+   0xa4000000	| 0x04000000	| 16MB		| PLD
+   0xa6000000	| 0x08000000	| 16MB		| USB
+   0xa8000000	| 0x48000000	| 384MB		| DDR-SDRAM (Non-cacheable)
+
+  b) after "pmb" command
+   virt		| phys		| size		| device
+   -------------+---------------+---------------+---------------
+   0x80000000	| 0x40000000	| 512MB		| DDR-SDRAM (Cacheable)
+   0xa0000000	| 0x40000000	| 512MB		| DDR-SDRAM (Non-cacheable)
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - hwtest
+ - printmac
+ - setmac
+ - pmb (sh7785lcr_32bit_config only)
+
+
+1. hwtest
+
+This is self-check command. This command has the following options:
+
+ - all		: test all hardware
+ - pld		: output PLD version
+ - led		: turn on LEDs
+ - dipsw	: test DIP switch
+ - sm107	: output SM107 version
+ - net		: check RTL8110 ID
+ - sata		: check SiI3512 ID
+ - net		: output PCI slot device ID
+
+i.e)
+=> hwtest led
+turn on LEDs 3, 5, 7, 9
+turn on LEDs 4, 6, 8, 10
+
+=> hwtest net
+Ethernet OK
+
+
+2. printmac
+
+This command outputs MAC address of this board.
+
+i.e)
+=> printmac
+MAC = 00:00:87:**:**:**
+
+
+3. setmac
+
+This command writes MAC address of this board.
+
+i.e)
+=> setmac 00:00:87:**:**:**
+
+
+4. pmb
+
+This command change PMB for DDR-SDRAM all mapping. However you cannot use
+NOR Flash and USB Host on U-Boot when you run this command.
+i.e)
+=> pmb
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/lowlevel_init.S b/qemu/roms/u-boot/board/renesas/sh7785lcr/lowlevel_init.S
new file mode 100644
index 000000000..8b729ac39
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/lowlevel_init.S
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+#include <asm/processor.h>
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	wait_timer	WAIT_200US
+	wait_timer	WAIT_200US
+
+	/*------- LBSC -------*/
+	write32 MMSELR_A,	MMSELR_D
+
+	/*------- DBSC2 -------*/
+	write32 DBSC2_DBCONF_A,	DBSC2_DBCONF_D
+	write32 DBSC2_DBTR0_A,	DBSC2_DBTR0_D
+	write32 DBSC2_DBTR1_A,	DBSC2_DBTR1_D
+	write32 DBSC2_DBTR2_A,	DBSC2_DBTR2_D
+	write32 DBSC2_DBFREQ_A,	DBSC2_DBFREQ_D1
+	write32 DBSC2_DBFREQ_A,	DBSC2_DBFREQ_D2
+	wait_timer	WAIT_200US
+
+	write32 DBSC2_DBDICODTOCD_A,	DBSC2_DBDICODTOCD_D
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_CKE_H
+	wait_timer	WAIT_200US
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_PALL
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS2
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS3
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_1
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_MRS_1
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_PALL
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_REF
+	write32 DBSC2_DBCMDCNT_A,	DBSC2_DBCMDCNT_D_REF
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_MRS_2
+	wait_timer	WAIT_200US
+
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_2
+	write32 DBSC2_DBMRCNT_A,	DBSC2_DBMRCNT_D_EMRS1_1
+
+	write32 DBSC2_DBEN_A,		DBSC2_DBEN_D
+	write32 DBSC2_DBRFCNT1_A,	DBSC2_DBRFCNT1_D
+	write32 DBSC2_DBRFCNT2_A,	DBSC2_DBRFCNT2_D
+	write32 DBSC2_DBRFCNT0_A,	DBSC2_DBRFCNT0_D
+	wait_timer	WAIT_200US
+
+	/*------- GPIO -------*/
+	write16 PACR_A,	PXCR_D
+	write16 PBCR_A,	PXCR_D
+	write16 PCCR_A,	PXCR_D
+	write16 PDCR_A,	PXCR_D
+	write16 PECR_A,	PXCR_D
+	write16 PFCR_A,	PXCR_D
+	write16 PGCR_A,	PXCR_D
+	write16 PHCR_A,	PHCR_D
+	write16 PJCR_A,	PJCR_D
+	write16 PKCR_A,	PKCR_D
+	write16 PLCR_A,	PXCR_D
+	write16 PMCR_A,	PMCR_D
+	write16 PNCR_A,	PNCR_D
+	write16 PPCR_A,	PXCR_D
+	write16 PQCR_A,	PXCR_D
+	write16 PRCR_A,	PXCR_D
+
+	write8	PEPUPR_A,	PEPUPR_D
+	write8	PHPUPR_A,	PHPUPR_D
+	write8	PJPUPR_A,	PJPUPR_D
+	write8	PKPUPR_A,	PKPUPR_D
+	write8	PLPUPR_A,	PLPUPR_D
+	write8	PMPUPR_A,	PMPUPR_D
+	write8	PNPUPR_A,	PNPUPR_D
+	write16	PPUPR1_A,	PPUPR1_D
+	write16	PPUPR2_A,	PPUPR2_D
+	write16	P1MSELR_A,	P1MSELR_D
+	write16	P2MSELR_A,	P2MSELR_D
+
+	/*------- LBSC -------*/
+	write32	BCR_A,		BCR_D
+	write32	CS0BCR_A,	CS0BCR_D
+	write32	CS0WCR_A,	CS0WCR_D
+	write32	CS1BCR_A,	CS1BCR_D
+	write32	CS1WCR_A,	CS1WCR_D
+	write32	CS4BCR_A,	CS4BCR_D
+	write32	CS4WCR_A,	CS4WCR_D
+
+	mov.l	PASCR_A, r0
+	mov.l	@r0, r2
+	mov.l	PASCR_32BIT_MODE, r1
+	tst	r1, r2
+	bt	lbsc_29bit
+
+	write32	CS2BCR_A,	CS_USB_BCR_D
+	write32	CS2WCR_A,	CS_USB_WCR_D
+	write32	CS3BCR_A,	CS_SD_BCR_D
+	write32	CS3WCR_A,	CS_SD_WCR_D
+	write32	CS5BCR_A,	CS_I2C_BCR_D
+	write32	CS5WCR_A,	CS_I2C_WCR_D
+	write32	CS6BCR_A,	CS0BCR_D
+	write32	CS6WCR_A,	CS0WCR_D
+	bra	lbsc_end
+	 nop
+
+lbsc_29bit:
+	write32	CS5BCR_A,	CS_USB_BCR_D
+	write32	CS5WCR_A,	CS_USB_WCR_D
+	write32	CS6BCR_A,	CS_SD_BCR_D
+	write32	CS6WCR_A,	CS_SD_WCR_D
+
+lbsc_end:
+#if defined(CONFIG_SH_32BIT)
+	/*------- set PMB -------*/
+	write32	PASCR_A,	PASCR_29BIT_D
+	write32	MMUCR_A,	MMUCR_D
+
+	/*****************************************************************
+	 * ent	virt		phys		v	sz	c	wt
+	 * 0	0xa0000000	0x00000000	1	64M	0	0
+	 * 1	0xa4000000	0x04000000	1	16M	0	0
+	 * 2	0xa6000000	0x08000000	1	16M	0	0
+	 * 9	0x88000000	0x48000000	1	128M	1	1
+	 * 10	0x90000000	0x50000000	1	128M	1	1
+	 * 11	0x98000000	0x58000000	1	128M	1	1
+	 * 13	0xa8000000	0x48000000	1	128M	0	0
+	 * 14	0xb0000000	0x50000000	1	128M	0	0
+	 * 15	0xb8000000	0x58000000	1	128M	0	0
+	 */
+	write32	PMB_ADDR_FLASH_A,	PMB_ADDR_FLASH_D
+	write32	PMB_DATA_FLASH_A,	PMB_DATA_FLASH_D
+	write32	PMB_ADDR_CPLD_A,	PMB_ADDR_CPLD_D
+	write32	PMB_DATA_CPLD_A,	PMB_DATA_CPLD_D
+	write32	PMB_ADDR_USB_A,		PMB_ADDR_USB_D
+	write32	PMB_DATA_USB_A,		PMB_DATA_USB_D
+	write32	PMB_ADDR_DDR_C1_A,	PMB_ADDR_DDR_C1_D
+	write32	PMB_DATA_DDR_C1_A,	PMB_DATA_DDR_C1_D
+	write32	PMB_ADDR_DDR_C2_A,	PMB_ADDR_DDR_C2_D
+	write32	PMB_DATA_DDR_C2_A,	PMB_DATA_DDR_C2_D
+	write32	PMB_ADDR_DDR_C3_A,	PMB_ADDR_DDR_C3_D
+	write32	PMB_DATA_DDR_C3_A,	PMB_DATA_DDR_C3_D
+	write32	PMB_ADDR_DDR_N1_A,	PMB_ADDR_DDR_N1_D
+	write32	PMB_DATA_DDR_N1_A,	PMB_DATA_DDR_N1_D
+	write32	PMB_ADDR_DDR_N2_A,	PMB_ADDR_DDR_N2_D
+	write32	PMB_DATA_DDR_N2_A,	PMB_DATA_DDR_N2_D
+	write32	PMB_ADDR_DDR_N3_A,	PMB_ADDR_DDR_N3_D
+	write32	PMB_DATA_DDR_N3_A,	PMB_DATA_DDR_N3_D
+
+	write32	PASCR_A,	PASCR_INIT
+	mov.l	DUMMY_ADDR, r0
+	icbi	@r0
+#endif
+
+	write32	CCR_A,	CCR_D
+
+	rts
+	nop
+
+	.align 4
+
+/*------- GPIO -------*/
+/* P{A,B C,D,E,F,G,L,P,Q,R}CR_D */
+PXCR_D:		.word	0x0000
+
+PHCR_D:		.word	0x00c0
+PJCR_D:		.word	0xc3fc
+PKCR_D:		.word	0x03ff
+PMCR_D:		.word	0xffff
+PNCR_D:		.word	0xf0c3
+
+PEPUPR_D:	.long	0xff
+PHPUPR_D:	.long	0x00
+PJPUPR_D:	.long	0x00
+PKPUPR_D:	.long	0x00
+PLPUPR_D:	.long	0x00
+PMPUPR_D:	.long	0xfc
+PNPUPR_D:	.long	0x00
+PPUPR1_D:	.word	0xffbf
+PPUPR2_D:	.word	0xff00
+P1MSELR_D:	.word	0x3780
+P2MSELR_D:	.word	0x0000
+
+#define GPIO_BASE	0xffe70000
+PACR_A:		.long	GPIO_BASE + 0x00
+PBCR_A:		.long	GPIO_BASE + 0x02
+PCCR_A:		.long	GPIO_BASE + 0x04
+PDCR_A:		.long	GPIO_BASE + 0x06
+PECR_A:		.long	GPIO_BASE + 0x08
+PFCR_A:		.long	GPIO_BASE + 0x0a
+PGCR_A:		.long	GPIO_BASE + 0x0c
+PHCR_A:		.long	GPIO_BASE + 0x0e
+PJCR_A:		.long	GPIO_BASE + 0x10
+PKCR_A:		.long	GPIO_BASE + 0x12
+PLCR_A:		.long	GPIO_BASE + 0x14
+PMCR_A:		.long	GPIO_BASE + 0x16
+PNCR_A:		.long	GPIO_BASE + 0x18
+PPCR_A:		.long	GPIO_BASE + 0x1a
+PQCR_A:		.long	GPIO_BASE + 0x1c
+PRCR_A:		.long	GPIO_BASE + 0x1e
+PEPUPR_A:	.long	GPIO_BASE + 0x48
+PHPUPR_A:	.long	GPIO_BASE + 0x4e
+PJPUPR_A:	.long	GPIO_BASE + 0x50
+PKPUPR_A:	.long	GPIO_BASE + 0x52
+PLPUPR_A:	.long	GPIO_BASE + 0x54
+PMPUPR_A:	.long	GPIO_BASE + 0x56
+PNPUPR_A:	.long	GPIO_BASE + 0x58
+PPUPR1_A:	.long	GPIO_BASE + 0x60
+PPUPR2_A:	.long	GPIO_BASE + 0x62
+P1MSELR_A:	.long	GPIO_BASE + 0x80
+P2MSELR_A:	.long	GPIO_BASE + 0x82
+
+MMSELR_A:      .long   0xfc400020
+#if defined(CONFIG_SH_32BIT)
+MMSELR_D:      .long   0xa5a50005
+#else
+MMSELR_D:      .long   0xa5a50002
+#endif
+
+/*------- DBSC2 -------*/
+#define DBSC2_BASE	0xfe800000
+DBSC2_DBSTATE_A:	.long	DBSC2_BASE + 0x0c
+DBSC2_DBEN_A:		.long	DBSC2_BASE + 0x10
+DBSC2_DBCMDCNT_A:	.long	DBSC2_BASE + 0x14
+DBSC2_DBCONF_A:		.long	DBSC2_BASE + 0x20
+DBSC2_DBTR0_A:		.long	DBSC2_BASE + 0x30
+DBSC2_DBTR1_A:		.long	DBSC2_BASE + 0x34
+DBSC2_DBTR2_A:		.long	DBSC2_BASE + 0x38
+DBSC2_DBRFCNT0_A:	.long	DBSC2_BASE + 0x40
+DBSC2_DBRFCNT1_A:	.long	DBSC2_BASE + 0x44
+DBSC2_DBRFCNT2_A:	.long	DBSC2_BASE + 0x48
+DBSC2_DBRFSTS_A:	.long	DBSC2_BASE + 0x4c
+DBSC2_DBFREQ_A:		.long	DBSC2_BASE + 0x50
+DBSC2_DBDICODTOCD_A:.long	DBSC2_BASE + 0x54
+DBSC2_DBMRCNT_A:	.long	DBSC2_BASE + 0x60
+DDR_DUMMY_ACCESS_A:	.long	0x40000000
+
+DBSC2_DBCONF_D:		.long	0x00630002
+DBSC2_DBTR0_D:		.long	0x050b1f04
+DBSC2_DBTR1_D:		.long	0x00040204
+DBSC2_DBTR2_D:		.long	0x02100308
+DBSC2_DBFREQ_D1:	.long	0x00000000
+DBSC2_DBFREQ_D2:	.long	0x00000100
+DBSC2_DBDICODTOCD_D:.long	0x000f0907
+
+DBSC2_DBCMDCNT_D_CKE_H:	.long	0x00000003
+DBSC2_DBCMDCNT_D_PALL:	.long	0x00000002
+DBSC2_DBCMDCNT_D_REF:	.long	0x00000004
+
+DBSC2_DBMRCNT_D_EMRS2:	.long	0x00020000
+DBSC2_DBMRCNT_D_EMRS3:	.long	0x00030000
+DBSC2_DBMRCNT_D_EMRS1_1:	.long	0x00010006
+DBSC2_DBMRCNT_D_EMRS1_2:	.long	0x00010386
+DBSC2_DBMRCNT_D_MRS_1:	.long	0x00000952
+DBSC2_DBMRCNT_D_MRS_2:	.long	0x00000852
+
+DBSC2_DBEN_D:		.long	0x00000001
+
+DBSC2_DBPDCNT0_D3:	.long	0x00000080
+DBSC2_DBRFCNT1_D:	.long	0x00000926
+DBSC2_DBRFCNT2_D:	.long	0x00fe00fe
+DBSC2_DBRFCNT0_D:	.long	0x00010000
+
+WAIT_200US:    .long   33333
+
+/*------- LBSC -------*/
+PASCR_A:		.long	0xff000070
+PASCR_32BIT_MODE:	.long	0x80000000	/* check booting mode */
+
+BCR_A:		.long	BCR
+CS0BCR_A:	.long	CS0BCR
+CS0WCR_A:	.long	CS0WCR
+CS1BCR_A:	.long	CS1BCR
+CS1WCR_A:	.long	CS1WCR
+CS2BCR_A:	.long	CS2BCR
+CS2WCR_A:	.long	CS2WCR
+CS3BCR_A:	.long	CS3BCR
+CS3WCR_A:	.long	CS3WCR
+CS4BCR_A:	.long	CS4BCR
+CS4WCR_A:	.long	CS4WCR
+CS5BCR_A:	.long	CS5BCR
+CS5WCR_A:	.long	CS5WCR
+CS6BCR_A:	.long	CS6BCR
+CS6WCR_A:	.long	CS6WCR
+
+BCR_D:		.long	0x80000003
+CS0BCR_D:	.long	0x22222340
+CS0WCR_D:	.long	0x00111118
+CS1BCR_D:	.long	0x11111100
+CS1WCR_D:	.long	0x33333303
+CS4BCR_D:	.long	0x11111300
+CS4WCR_D:	.long	0x00101012
+
+/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */
+CS_USB_BCR_D:	.long	0x11111200
+CS_USB_WCR_D:	.long	0x00020005
+
+/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */
+CS_SD_BCR_D:	.long	0x00000300
+CS_SD_WCR_D:	.long	0x00030108
+
+/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */
+CS_I2C_BCR_D:	.long	0x11111100
+CS_I2C_WCR_D:	.long	0x00000003
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_FLASH_A:	.long	PMB_ADDR_BASE(0)
+PMB_ADDR_CPLD_A:	.long	PMB_ADDR_BASE(1)
+PMB_ADDR_USB_A:		.long	PMB_ADDR_BASE(2)
+PMB_ADDR_DDR_C1_A:	.long	PMB_ADDR_BASE(9)
+PMB_ADDR_DDR_C2_A:	.long	PMB_ADDR_BASE(10)
+PMB_ADDR_DDR_C3_A:	.long	PMB_ADDR_BASE(11)
+PMB_ADDR_DDR_N1_A:	.long	PMB_ADDR_BASE(13)
+PMB_ADDR_DDR_N2_A:	.long	PMB_ADDR_BASE(14)
+PMB_ADDR_DDR_N3_A:	.long	PMB_ADDR_BASE(15)
+
+PMB_ADDR_FLASH_D:	.long	mk_pmb_addr_val(0xa0)
+PMB_ADDR_CPLD_D:	.long	mk_pmb_addr_val(0xa4)
+PMB_ADDR_USB_D:		.long	mk_pmb_addr_val(0xa6)
+PMB_ADDR_DDR_C1_D:	.long	mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_C2_D:	.long	mk_pmb_addr_val(0x90)
+PMB_ADDR_DDR_C3_D:	.long	mk_pmb_addr_val(0x98)
+PMB_ADDR_DDR_N1_D:	.long	mk_pmb_addr_val(0xa8)
+PMB_ADDR_DDR_N2_D:	.long	mk_pmb_addr_val(0xb0)
+PMB_ADDR_DDR_N3_D:	.long	mk_pmb_addr_val(0xb8)
+
+PMB_DATA_FLASH_A:	.long	PMB_DATA_BASE(0)
+PMB_DATA_CPLD_A:	.long	PMB_DATA_BASE(1)
+PMB_DATA_USB_A:		.long	PMB_DATA_BASE(2)
+PMB_DATA_DDR_C1_A:	.long	PMB_DATA_BASE(9)
+PMB_DATA_DDR_C2_A:	.long	PMB_DATA_BASE(10)
+PMB_DATA_DDR_C3_A:	.long	PMB_DATA_BASE(11)
+PMB_DATA_DDR_N1_A:	.long	PMB_DATA_BASE(13)
+PMB_DATA_DDR_N2_A:	.long	PMB_DATA_BASE(14)
+PMB_DATA_DDR_N3_A:	.long	PMB_DATA_BASE(15)
+
+/*						ppn   ub v s1 s0  c  wt */
+PMB_DATA_FLASH_D:	.long	mk_pmb_data_val(0x00, 1, 1, 0, 1, 0, 1)
+PMB_DATA_CPLD_D:	.long	mk_pmb_data_val(0x04, 1, 1, 0, 0, 0, 1)
+PMB_DATA_USB_D:		.long	mk_pmb_data_val(0x08, 1, 1, 0, 0, 0, 1)
+PMB_DATA_DDR_C1_D:	.long	mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_C2_D:	.long	mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_C3_D:	.long	mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D:	.long	mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_N2_D:	.long	mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_N3_D:	.long	mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1)
+
+DUMMY_ADDR:	.long	0xa0000000
+PASCR_29BIT_D:	.long	0x00000000
+PASCR_INIT:	.long	0x80000080	/* check booting mode */
+MMUCR_A:	.long	0xff000010
+MMUCR_D:	.long	0x00000004	/* clear ITLB */
+#endif	/* CONFIG_SH_32BIT */
+
+CCR_A:		.long	0xff00001c
+CCR_D:		.long	0x0000090b
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169.h b/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169.h
new file mode 100644
index 000000000..888de4846
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#define PCIREG_8(_adr)	(*(volatile unsigned char *)(_adr))
+#define PCIREG_32(_adr)	(*(volatile unsigned long *)(_adr))
+#define PCI_PAR		PCIREG_32(0xfe0401c0)
+#define PCI_PDR		PCIREG_32(0xfe040220)
+#define PCI_CR		PCIREG_32(0xfe040100)
+#define PCI_CONF1	PCIREG_32(0xfe040004)
+
+#define HIGH		1
+#define LOW		0
+
+#define PCI_PROG		0x80
+#define PCI_EEP_ADDRESS		(unsigned short)0x0007
+#define PCI_MAC_ADDRESS_SIZE	3
+
+#define TIME1	100
+#define TIME2	20000
+
+#define BIT_DUMMY	0
+#define MAC_EEP_READ	1
+#define MAC_EEP_WRITE	2
+#define MAC_EEP_ERACE	3
+#define MAC_EEP_EWEN	4
+#define MAC_EEP_EWDS	5
+
+/* RTL8169 */
+const unsigned short EEPROM_W_Data_8169_A[] = {
+	0x8129, 0x10ec, 0x8169, 0x1154, 0x032b,
+	0x4020, 0xa101
+};
+const unsigned short EEPROM_W_Data_8169_B[] = {
+	0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
+};
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169_mac.c b/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169_mac.c
new file mode 100644
index 000000000..c91ebdc54
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include "rtl8169.h"
+
+static unsigned char *PCI_MEMR;
+
+static void mac_delay(unsigned int cnt)
+{
+	udelay(cnt);
+}
+
+static void mac_pci_setup(void)
+{
+	unsigned long pci_data;
+
+	PCI_PAR = 0x00000010;
+	PCI_PDR = 0x00001000;
+	PCI_PAR = 0x00000004;
+	pci_data = PCI_PDR;
+	PCI_PDR = pci_data | 0x00000007;
+	PCI_PAR = 0x00000010;
+
+	PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0);
+}
+
+static void EECS(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x08;
+	else
+		*PCI_MEMR = data & 0xf7;
+}
+
+static void EECLK(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x04;
+	else
+		*PCI_MEMR = data & 0xfb;
+}
+
+static void EEDI(int level)
+{
+	unsigned char data = *PCI_MEMR;
+
+	if (level)
+		*PCI_MEMR = data | 0x02;
+	else
+		*PCI_MEMR = data & 0xfd;
+}
+
+static inline void sh7785lcr_bitset(unsigned short bit)
+{
+	if (bit)
+		EEDI(HIGH);
+	else
+		EEDI(LOW);
+
+	EECLK(LOW);
+	mac_delay(TIME1);
+	EECLK(HIGH);
+	mac_delay(TIME1);
+	EEDI(LOW);
+}
+
+static inline unsigned char sh7785lcr_bitget(void)
+{
+	unsigned char bit;
+
+	EECLK(LOW);
+	mac_delay(TIME1);
+	bit = *PCI_MEMR & 0x01;
+	EECLK(HIGH);
+	mac_delay(TIME1);
+
+	return bit;
+}
+
+static inline void sh7785lcr_setcmd(unsigned char command)
+{
+	sh7785lcr_bitset(BIT_DUMMY);
+	switch (command) {
+	case MAC_EEP_READ:
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(0);
+		break;
+	case MAC_EEP_WRITE:
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(0);
+		sh7785lcr_bitset(1);
+		break;
+	case MAC_EEP_ERACE:
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(1);
+		break;
+	case MAC_EEP_EWEN:
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(0);
+		sh7785lcr_bitset(0);
+		break;
+	case MAC_EEP_EWDS:
+		sh7785lcr_bitset(1);
+		sh7785lcr_bitset(0);
+		sh7785lcr_bitset(0);
+		break;
+	default:
+		break;
+	}
+}
+
+static inline unsigned short sh7785lcr_getdt(void)
+{
+	unsigned short data = 0;
+	int i;
+
+	sh7785lcr_bitget();			/* DUMMY */
+	for (i = 0 ; i < 16 ; i++) {
+		data <<= 1;
+		data |= sh7785lcr_bitget();
+	}
+	return data;
+}
+
+static inline void sh7785lcr_setadd(unsigned short address)
+{
+	sh7785lcr_bitset(address & 0x0020);	/* A5 */
+	sh7785lcr_bitset(address & 0x0010);	/* A4 */
+	sh7785lcr_bitset(address & 0x0008);	/* A3 */
+	sh7785lcr_bitset(address & 0x0004);	/* A2 */
+	sh7785lcr_bitset(address & 0x0002);	/* A1 */
+	sh7785lcr_bitset(address & 0x0001);	/* A0 */
+}
+
+static inline void sh7785lcr_setdata(unsigned short data)
+{
+	sh7785lcr_bitset(data & 0x8000);
+	sh7785lcr_bitset(data & 0x4000);
+	sh7785lcr_bitset(data & 0x2000);
+	sh7785lcr_bitset(data & 0x1000);
+	sh7785lcr_bitset(data & 0x0800);
+	sh7785lcr_bitset(data & 0x0400);
+	sh7785lcr_bitset(data & 0x0200);
+	sh7785lcr_bitset(data & 0x0100);
+	sh7785lcr_bitset(data & 0x0080);
+	sh7785lcr_bitset(data & 0x0040);
+	sh7785lcr_bitset(data & 0x0020);
+	sh7785lcr_bitset(data & 0x0010);
+	sh7785lcr_bitset(data & 0x0008);
+	sh7785lcr_bitset(data & 0x0004);
+	sh7785lcr_bitset(data & 0x0002);
+	sh7785lcr_bitset(data & 0x0001);
+}
+
+static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address,
+			 unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+
+		sh7785lcr_setcmd(MAC_EEP_WRITE);
+		sh7785lcr_setadd(address++);
+		sh7785lcr_setdata(*(data + i));
+
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+		mac_delay(TIME2);
+	}
+}
+
+static void sh7785lcr_macerase(void)
+{
+	unsigned int i;
+	unsigned short pci_address = 7;
+
+	for (i = 0; i < 3; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+		sh7785lcr_setcmd(MAC_EEP_ERACE);
+		sh7785lcr_setadd(pci_address++);
+		mac_delay(TIME1);
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+	}
+
+	mac_delay(TIME2);
+
+	printf("\n\nErace End\n");
+	for (i = 0; i < 10; i++)
+		mac_delay(TIME2);
+}
+
+static void sh7785lcr_macwrite(unsigned short *data)
+{
+	sh7785lcr_macerase();
+
+	sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7);
+	sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+	sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54);
+}
+
+void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count)
+{
+	unsigned int i;
+	unsigned short wk;
+
+	for (i = 0 ; i < count; i++) {
+		EECS(HIGH);
+		EEDI(LOW);
+		mac_delay(TIME1);
+		sh7785lcr_setcmd(MAC_EEP_READ);
+		sh7785lcr_setadd(address++);
+		wk = sh7785lcr_getdt();
+
+		*buf++ = (unsigned char)(wk & 0xff);
+		*buf++ = (unsigned char)((wk >> 8) & 0xff);
+		EECLK(LOW);
+		EEDI(LOW);
+		EECS(LOW);
+	}
+}
+
+static void sh7785lcr_macadrd(unsigned char *buf)
+{
+	*PCI_MEMR = PCI_PROG;
+
+	sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+}
+
+static void sh7785lcr_eepewen(void)
+{
+	*PCI_MEMR = PCI_PROG;
+	mac_delay(TIME1);
+	EECS(LOW);
+	EECLK(LOW);
+	EEDI(LOW);
+	EECS(HIGH);
+	mac_delay(TIME1);
+
+	sh7785lcr_setcmd(MAC_EEP_EWEN);
+	sh7785lcr_bitset(1);
+	sh7785lcr_bitset(1);
+	sh7785lcr_bitset(BIT_DUMMY);
+	sh7785lcr_bitset(BIT_DUMMY);
+	sh7785lcr_bitset(BIT_DUMMY);
+	sh7785lcr_bitset(BIT_DUMMY);
+
+	EECLK(LOW);
+	EEDI(LOW);
+	EECS(LOW);
+	mac_delay(TIME1);
+}
+
+void mac_write(unsigned short *data)
+{
+	mac_pci_setup();
+	sh7785lcr_eepewen();
+	sh7785lcr_macwrite(data);
+}
+
+void mac_read(void)
+{
+	unsigned char data[6];
+
+	mac_pci_setup();
+	sh7785lcr_macadrd(data);
+	printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n",
+		data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int i;
+	unsigned char mac[6];
+	char *s, *e;
+
+	if (argc != 2)
+		return cmd_usage(cmdtp);
+
+	s = argv[1];
+
+	for (i = 0; i < 6; i++) {
+		mac[i] = s ? simple_strtoul(s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+	mac_write((unsigned short *)mac);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	setmac,	2,	1,	do_set_mac,
+	"write MAC address for RTL8110SCL",
+	"\n"
+	"setmac <mac address> - write MAC address for RTL8110SCL"
+);
+
+int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	if (argc != 1)
+		return cmd_usage(cmdtp);
+
+	mac_read();
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	printmac,	1,	1,	do_print_mac,
+	"print MAC address for RTL8110",
+	"\n"
+	"    - print MAC address for RTL8110"
+);
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/selfcheck.c b/qemu/roms/u-boot/board/renesas/sh7785lcr/selfcheck.c
new file mode 100644
index 000000000..d52075070
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/selfcheck.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+
+#if defined(CONFIG_CPU_32BIT)
+#define NOCACHE_OFFSET		0x00000000
+#else
+#define NOCACHE_OFFSET		0xa0000000
+#endif
+#define PLD_LEDCR		(0x04000008 + NOCACHE_OFFSET)
+#define PLD_SWSR		(0x0400000a + NOCACHE_OFFSET)
+#define PLD_VERSR		(0x0400000c + NOCACHE_OFFSET)
+
+#define SM107_DEVICEID		(0x13e00060 + NOCACHE_OFFSET)
+
+static void test_pld(void)
+{
+	printf("PLD version = %04x\n", readb(PLD_VERSR));
+}
+
+static void test_sm107(void)
+{
+	printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
+}
+
+static void test_led(void)
+{
+	printf("turn on LEDs 3, 5, 7, 9\n");
+	writeb(0x55, PLD_LEDCR);
+	mdelay(2000);
+	printf("turn on LEDs 4, 6, 8, 10\n");
+	writeb(0xaa, PLD_LEDCR);
+	mdelay(2000);
+	writeb(0x00, PLD_LEDCR);
+}
+
+static void test_dipsw(void)
+{
+	printf("Please DIPSW set = B'0101\n");
+	while (readb(PLD_SWSR) != 0x05) {
+		if (ctrlc())
+			return;
+	}
+	printf("Please DIPSW set = B'1010\n");
+	while (readb(PLD_SWSR) != 0x0A) {
+		if (ctrlc())
+			return;
+	}
+	printf("DIPSW OK\n");
+}
+
+static void test_net(void)
+{
+	unsigned long data;
+
+	writel(0x80000000, 0xfe0401c0);
+	data = readl(0xfe040220);
+	if (data == 0x816910ec)
+		printf("Ethernet OK\n");
+	else
+		printf("Ethernet NG, data = %08x\n", (unsigned int)data);
+}
+
+static void test_sata(void)
+{
+	unsigned long data;
+
+	writel(0x80000800, 0xfe0401c0);
+	data = readl(0xfe040220);
+	if (data == 0x35121095)
+		printf("SATA OK\n");
+	else
+		printf("SATA NG, data = %08x\n", (unsigned int)data);
+}
+
+static void test_pci(void)
+{
+	writel(0x80001800, 0xfe0401c0);
+	printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
+
+	writel(0x80001000, 0xfe0401c0);
+	printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
+}
+
+int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	char *cmd;
+
+	if (argc != 2)
+		return cmd_usage(cmdtp);
+
+	cmd = argv[1];
+	switch (cmd[0]) {
+	case 'a':	/* all */
+		test_pld();
+		test_led();
+		test_dipsw();
+		test_sm107();
+		test_net();
+		test_sata();
+		test_pci();
+		break;
+	case 'p':	/* pld or pci */
+		if (cmd[1] == 'l')
+			test_pld();
+		else
+			test_pci();
+		break;
+	case 'l':	/* led */
+		test_led();
+		break;
+	case 'd':	/* dipsw */
+		test_dipsw();
+		break;
+	case 's':	/* sm107 or sata */
+		if (cmd[1] == 'm')
+			test_sm107();
+		else
+			test_sata();
+		break;
+	case 'n':	/* net */
+		test_net();
+		break;
+	default:
+		return cmd_usage(cmdtp);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	hwtest,	2,	1,	do_hw_test,
+	"hardware test for R0P7785LC0011RL board",
+	"\n"
+	"hwtest all   - test all hardware\n"
+	"hwtest pld   - output PLD version\n"
+	"hwtest led   - turn on LEDs\n"
+	"hwtest dipsw - test DIP switch\n"
+	"hwtest sm107 - output SM107 version\n"
+	"hwtest net   - check RTL8110 ID\n"
+	"hwtest sata  - check SiI3512 ID\n"
+	"hwtest pci   - output PCI slot device ID"
+);
diff --git a/qemu/roms/u-boot/board/renesas/sh7785lcr/sh7785lcr.c b/qemu/roms/u-boot/board/renesas/sh7785lcr/sh7785lcr.c
new file mode 100644
index 000000000..622e60261
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7785lcr/sh7785lcr.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+static struct pci_controller hose;
+void pci_init_board(void)
+{
+	pci_sh7780_init(&hose);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_SH_32BIT)
+int do_pmb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	/* clear ITLB */
+	writel(0x00000004, 0xff000010);
+
+	/* delete PMB for peripheral */
+	writel(0, PMB_ADDR_BASE(0));
+	writel(0, PMB_DATA_BASE(0));
+	writel(0, PMB_ADDR_BASE(1));
+	writel(0, PMB_DATA_BASE(1));
+	writel(0, PMB_ADDR_BASE(2));
+	writel(0, PMB_DATA_BASE(2));
+
+	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(8));
+	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(8));
+	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(12));
+	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(12));
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	pmb,	1,	1,	do_pmb,
+	"pmb     - PMB setting\n",
+	"\n"
+	"    - PMB setting for all SDRAM mapping"
+);
+#endif