Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

6 files changed, 0 insertions, 710 deletions

diff --git a/qemu/roms/u-boot/board/quantum/Makefile b/qemu/roms/u-boot/board/quantum/Makefile
deleted file mode 100644
index 6918f63c3..000000000
--- a/qemu/roms/u-boot/board/quantum/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= quantum.o fpga.o
diff --git a/qemu/roms/u-boot/board/quantum/fpga.c b/qemu/roms/u-boot/board/quantum/fpga.c
deleted file mode 100644
index 4bd391a54..000000000
--- a/qemu/roms/u-boot/board/quantum/fpga.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/* The DEBUG define must be before common to enable debugging */
-#undef DEBUG
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include "fpga.h"
-/* ------------------------------------------------------------------------- */
-
-#define MAX_ONES               226
-
-/* MPC850 port D */
-#define PD(bit) (1 << (15 - (bit)))
-# define FPGA_INIT             PD(11)	/* FPGA init pin (ppc input)     */
-# define FPGA_PRG              PD(12)	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              PD(13)	/* FPGA clk pin (ppc output)     */
-# define FPGA_DATA             PD(14)	/* FPGA data pin (ppc output)    */
-# define FPGA_DONE             PD(15)	/* FPGA done pin (ppc input)     */
-
-
-/* DDR 0 - input, 1 - output */
-#define FPGA_INIT_PDDIR          FPGA_PRG | FPGA_CLK | FPGA_DATA	/* just set outputs */
-
-
-#define SET_FPGA(data)         immr->im_ioport.iop_pddat = (data)
-#define GET_FPGA               immr->im_ioport.iop_pddat
-
-#define FPGA_WRITE_1 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-#define FPGA_WRITE_0 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-
-int fpga_boot (unsigned char *fpgadata, int size)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	int i, index, len;
-	int count;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	int j;
-	unsigned char data;
-#else
-	unsigned char b;
-	int bit;
-#endif
-
-	debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size);
-
-	/* display infos on fpgaimage */
-	printf ("FPGA:");
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf (" %s", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-	printf ("\n");
-
-
-	index = 0;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/* search for preamble 0xFFFFFFFF */
-	while (1) {
-		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
-		    && (fpgadata[index + 2] == 0xff)
-		    && (fpgadata[index + 3] == 0xff))
-			break;	/* preamble found */
-		else
-			index++;
-	}
-#else
-	/* search for preamble 0xFF2X */
-	for (index = 0; index < size - 1; index++) {
-		if ((fpgadata[index] == 0xff)
-		    && ((fpgadata[index + 1] & 0xf0) == 0x30))
-			break;
-	}
-	index += 2;
-#endif
-
-	debug ("FPGA: configdata starts at position 0x%x\n", index);
-	debug ("FPGA: length of fpga-data %d\n", size - index);
-
-	/*
-	 * Setup port pins for fpga programming
-	 */
-	immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR;
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Init fpga by asserting and deasserting PROGRAM*
-	 */
-	SET_FPGA (FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA init line low */
-	count = 0;
-	while (GET_FPGA & FPGA_INIT) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout - 100us max, so use 3ms */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_LOW;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/* deassert PROGRAM* */
-	SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA end of init period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_INIT)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_HIGH;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	debug ("write configuration data into fpga\n");
-	/* write configuration-data into fpga... */
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/*
-	 * Load uncompressed image into fpga
-	 */
-	for (i = index; i < size; i++) {
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		if ((i % 1024) == 0)
-			printf ("%6d out of %6d\r", i, size);	/* let them know we are alive */
-#endif
-
-		data = fpgadata[i];
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-	/* add some 0xff to the end of the file */
-	for (i = 0; i < 8; i++) {
-		data = 0xff;
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-#else
-	/* send 0xff 0x20 */
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-
-	/*
-	 ** Bit_DeCompression
-	 **   Code 1           .. maxOnes     : n                 '1's followed by '0'
-	 **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
-	 **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
-	 **        255                        :                   '1'
-	 */
-
-	for (i = index; i < size; i++) {
-		b = fpgadata[i];
-		if ((b >= 1) && (b <= MAX_ONES)) {
-			for (bit = 0; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-			FPGA_WRITE_0;
-		} else if (b == (MAX_ONES + 1)) {
-			for (bit = 1; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-		} else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
-			for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
-				FPGA_WRITE_0;
-			}
-			FPGA_WRITE_1;
-		} else if (b == 255) {
-			FPGA_WRITE_1;
-		}
-	}
-#endif
-	debug ("\n\n");
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Check if fpga's DONE signal - correctly booted ?
-	 */
-
-	/* Wait for FPGA end of programming period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_DONE)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_DONE;
-		}
-	}
-
-	debug ("FPGA: Booting successful!\n");
-	return 0;
-}
diff --git a/qemu/roms/u-boot/board/quantum/fpga.h b/qemu/roms/u-boot/board/quantum/fpga.h
deleted file mode 100644
index a9f408629..000000000
--- a/qemu/roms/u-boot/board/quantum/fpga.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Virtex2 FPGA configuration support for the QUANTUM computer
- */
-int fpga_boot(unsigned char *fpgadata, int size);
-
-#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
-#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
-#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
diff --git a/qemu/roms/u-boot/board/quantum/quantum.c b/qemu/roms/u-boot/board/quantum/quantum.c
deleted file mode 100644
index 17e3fc267..000000000
--- a/qemu/roms/u-boot/board/quantum/quantum.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "fpga.h"
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-unsigned long flash_init (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
-	0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
-	0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 * (Initialization code at 0x36)
-	 */
-	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board QUANTUM, Serial No: ");
-
-	for (i = 0; i < l; ++i) {
-		if (buf[i] == ' ')
-			break;
-		putc (buf[i]);
-	}
-	putc ('\n');
-	return (0);		/* success */
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size9;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002136;	/* SDRAM bank 0 */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size,
-	 * 9 column mode
-	 */
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
-			   SDRAM_MAX_SIZE);
-	/*
-	 * Final mapping:
-	 */
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	udelay (1000);
-
-	return (size9);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile ulong *addr;
-	ulong cnt, val, size;
-	ulong save[32];		/* to make test non-destructive */
-	unsigned char i = 0;
-
-	memctl->memc_mamr = mamr_value;
-
-	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		save[i++] = *addr;
-		*addr = ~cnt;
-	}
-
-	/* write 0 to base address */
-	addr = (volatile ulong *)base;
-	save[i] = *addr;
-	*addr = 0;
-
-	/* check at base address */
-	if ((val = *addr) != 0) {
-		/* Restore the original data before leaving the function.
-		 */
-		*addr = save[i];
-		for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-			addr = (volatile ulong *) base + cnt;
-			*addr = save[--i];
-		}
-		return (0);
-	}
-
-	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		val = *addr;
-		*addr = save[--i];
-
-		if (val != (~cnt)) {
-			size = cnt * sizeof (long);
-			/* Restore the original data before returning
-			 */
-			for (cnt <<= 1; cnt <= maxsize / sizeof (long);
-			     cnt <<= 1) {
-				addr = (volatile ulong *) base + cnt;
-				*addr = save[--i];
-			}
-			return (size);
-		}
-	}
-	return (maxsize);
-}
-
-/*
- * Miscellaneous intialization
- */
-int misc_init_r (void)
-{
-	char *fpga_data_str = getenv ("fpgadata");
-	char *fpga_size_str = getenv ("fpgasize");
-	void *fpga_data;
-	int fpga_size;
-	int status;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int flash_size;
-
-	/* Remap FLASH according to real size */
-	flash_size = flash_init ();
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	if (fpga_data_str && fpga_size_str) {
-		fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16);
-		fpga_size = simple_strtoul (fpga_size_str, NULL, 10);
-
-		status = fpga_boot (fpga_data, fpga_size);
-		if (status != 0) {
-			printf ("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf ("(Timeout: DONE not high after programming FPGA)\n ");
-				break;
-			}
-		}
-	}
-	return 0;
-}
diff --git a/qemu/roms/u-boot/board/quantum/u-boot.lds b/qemu/roms/u-boot/board/quantum/u-boot.lds
deleted file mode 100644
index 0eb2fba00..000000000
--- a/qemu/roms/u-boot/board/quantum/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/qemu/roms/u-boot/board/quantum/u-boot.lds.debug b/qemu/roms/u-boot/board/quantum/u-boot.lds.debug
deleted file mode 100644
index b2c562c33..000000000
--- a/qemu/roms/u-boot/board/quantum/u-boot.lds.debug
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}