Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 140 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/pxa255_idp/pxa_idp.c b/qemu/roms/u-boot/board/pxa255_idp/pxa_idp.c
new file mode 100644
index 000000000..197ff3ef3
--- /dev/null
+++ b/qemu/roms/u-boot/board/pxa255_idp/pxa_idp.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2004
+ * BEC Systems <http://bec-systems.com>
+ * Cliff Brake <cliff.brake@gmail.com>
+ * Support for Accelent/Vibren PXA255 IDP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	/* We have RAM, disable cache */
+	dcache_disable();
+	icache_disable();
+
+	/* arch number of Lubbock-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	/* turn on serial ports */
+	*(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C0002c) = 0x13;
+
+	/* set PWM for LCD */
+	/* a value that works is 60Hz, 77% duty cycle */
+	writel(readl(CKEN) | CKEN0_PWM0, CKEN);
+	writel(0x3f, PWM_CTRL0);
+	writel(0x3ff, PWM_PERVAL0);
+	writel(792, PWM_PWDUTY0);
+
+	/* clear reset to AC97 codec */
+	writel(readl(CKEN) | CKEN2_AC97, CKEN);
+	writel(GCR_COLD_RST, GCR);
+
+	/* enable LCD backlight */
+	/* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */
+
+	/* test display */
+	/* lcd_puts("This is a test\nTest #2\n"); */
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
+int board_late_init(void)
+{
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+	return 0;
+}
+
+int dram_init(void)
+{
+	pxa2xx_dram_init();
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef DEBUG_BLINKC_ENABLE
+
+void delay_c(void)
+{
+	/* reset OSCR to 0 */
+	writel(0, OSCR);
+	while (readl(OSCR) > 0x10000)
+		;
+
+	while (readl(OSCR) < 0xd4000)
+		;
+}
+
+void blink_c(void)
+{
+	int led_bit = (1<<10);
+
+	writel(led_bit, GPDR0);
+	writel(led_bit, GPCR0);
+	delay_c();
+	writel(led_bit, GPSR0);
+	delay_c();
+	writel(led_bit, GPCR0);
+}
+
+int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	printf("IDPCMD started\n");
+	return 0;
+}
+
+U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
+	   "custom IDP command",
+	   "no args at this time"
+);
+
+#endif
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC91111
+	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+	return rc;
+}
+#endif