Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 157 deletions

diff --git a/qemu/roms/u-boot/board/omicron/calimain/Makefile b/qemu/roms/u-boot/board/omicron/calimain/Makefile
deleted file mode 100644
index 59c118d07..000000000
--- a/qemu/roms/u-boot/board/omicron/calimain/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y   := calimain.o
diff --git a/qemu/roms/u-boot/board/omicron/calimain/calimain.c b/qemu/roms/u-boot/board/omicron/calimain/calimain.c
deleted file mode 100644
index dd28915cd..000000000
--- a/qemu/roms/u-boot/board/omicron/calimain/calimain.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2011 OMICRON electronics GmbH
- *
- * Based on da850evm.c. Original Copyrights follow:
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <watchdog.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/emif_defs.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/timer_defs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CALIMAIN_HWVERSION_MASK    0x7f000000
-#define CALIMAIN_HWVERSION_SHIFT   24
-
-/* Hardware version pinmux settings */
-const struct pinmux_config hwversion_pins[] = {
-	{ pinmux(16), 8, 2 }, /* GP7[15] */
-	{ pinmux(16), 8, 3 }, /* GP7[14] */
-	{ pinmux(16), 8, 4 }, /* GP7[13] */
-	{ pinmux(16), 8, 5 }, /* GP7[12] */
-	{ pinmux(16), 8, 6 }, /* GP7[11] */
-	{ pinmux(16), 8, 7 }, /* GP7[10] */
-	{ pinmux(17), 8, 0 }, /* GP7[9] */
-	{ pinmux(17), 8, 1 }  /* GP7[8] */
-};
-
-const struct pinmux_resource pinmuxes[] = {
-	PINMUX_ITEM(uart2_pins_txrx),
-	PINMUX_ITEM(emac_pins_mii),
-	PINMUX_ITEM(emac_pins_mdio),
-	PINMUX_ITEM(emifa_pins_nor),
-	PINMUX_ITEM(emifa_pins_cs2),
-	PINMUX_ITEM(emifa_pins_cs3),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
-	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
-	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
-	{ DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-/* read board revision from GPIO7[8..14] */
-u32 get_board_rev(void)
-{
-	lpsc_on(DAVINCI_LPSC_GPIO);
-	if (davinci_configure_pin_mux(hwversion_pins,
-				      ARRAY_SIZE(hwversion_pins)) != 0)
-		return 0xffffffff;
-
-	return (davinci_gpio_bank67->in_data & CALIMAIN_HWVERSION_MASK)
-		>> CALIMAIN_HWVERSION_SHIFT;
-}
-
-/*
- * determine the oscillator frequency depending on the board revision
- *
- * rev 0x00  ... 25 MHz oscillator
- * rev 0x01  ... 24 MHz oscillator
- */
-int calimain_get_osc_freq(void)
-{
-	u32 rev;
-	int freq;
-
-	rev = get_board_rev();
-	switch (rev) {
-	case 0x00:
-		freq = 25000000;
-		break;
-	default:
-		freq = 24000000;
-		break;
-	}
-	return freq;
-}
-
-int board_init(void)
-{
-	int val;
-
-#ifndef CONFIG_USE_IRQ
-	irq_init();
-#endif
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-	/* select emac MII mode */
-	val = readl(&davinci_syscfg_regs->cfgchip3);
-	val &= ~(1 << 8);
-	writel(val, &davinci_syscfg_regs->cfgchip3);
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#ifdef CONFIG_HW_WATCHDOG
-	davinci_hw_watchdog_enable();
-#endif
-
-	printf("Input clock frequency: %d Hz\n", calimain_get_osc_freq());
-	printf("Board revision:        %d\n", get_board_rev());
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
-	if (!davinci_emac_initialize()) {
-		printf("Error: Ethernet init failed!\n");
-		return -1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#ifdef CONFIG_HW_WATCHDOG
-void hw_watchdog_reset(void)
-{
-	davinci_hw_watchdog_reset();
-}
-#endif