Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

2 files changed, 219 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/mimc/mimc200/Makefile b/qemu/roms/u-boot/board/mimc/mimc200/Makefile
new file mode 100644
index 000000000..5c30c0dbc
--- /dev/null
+++ b/qemu/roms/u-boot/board/mimc/mimc200/Makefile
@@ -0,0 +1,6 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= mimc200.o
diff --git a/qemu/roms/u-boot/board/mimc/mimc200/mimc200.c b/qemu/roms/u-boot/board/mimc/mimc200/mimc200.c
new file mode 100644
index 000000000..2ad53ec2a
--- /dev/null
+++ b/qemu/roms/u-boot/board/mimc/mimc200/mimc200.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <netdev.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
+#include <asm/arch/portmux.h>
+#include <atmel_lcdc.h>
+#include <lcd.h>
+
+#include "../../../arch/avr32/cpu/hsmc3.h"
+
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+	{
+		.virt_pgno	= CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+		.nr_pages	= CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+					| MMU_VMR_CACHE_NONE,
+	}, {
+		.virt_pgno	= EBI_SRAM_CS2_BASE >> PAGE_SHIFT,
+		.nr_pages	= EBI_SRAM_CS2_SIZE >> PAGE_SHIFT,
+		.phys		= (EBI_SRAM_CS2_BASE >> PAGE_SHIFT)
+					| MMU_VMR_CACHE_NONE,
+	}, {
+		.virt_pgno	= CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+		.nr_pages	= EBI_SDRAM_SIZE >> PAGE_SHIFT,
+		.phys		= (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+					| MMU_VMR_CACHE_WRBACK,
+	},
+};
+
+#if defined(CONFIG_LCD)
+/* 480x272x16 @ 72 Hz */
+vidinfo_t panel_info = {
+	.vl_col			= 480,		/* Number of columns */
+	.vl_row			= 272,		/* Number of rows */
+	.vl_clk			= 5000000,	/* pixel clock in ps */
+	.vl_sync		= ATMEL_LCDC_INVCLK_INVERTED |
+				  ATMEL_LCDC_INVLINE_INVERTED |
+				  ATMEL_LCDC_INVFRAME_INVERTED,
+	.vl_bpix		= LCD_COLOR16,	/* Bits per pixel, BPP = 2^n */
+	.vl_tft			= 1,		/* 0 = passive, 1 = TFT */
+	.vl_hsync_len		= 42,		/* Length of horizontal sync */
+	.vl_left_margin		= 1,		/* Time from sync to picture */
+	.vl_right_margin	= 1,		/* Time from picture to sync */
+	.vl_vsync_len		= 1,		/* Length of vertical sync */
+	.vl_upper_margin	= 12,		/* Time from sync to picture */
+	.vl_lower_margin	= 1,		/* Time from picture to sync */
+	.mmio			= LCDC_BASE,	/* Memory mapped registers */
+};
+
+void lcd_enable(void)
+{
+}
+
+void lcd_disable(void)
+{
+}
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_16BIT,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 6,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 6,
+	.txsr		= 6,
+	/* 15.6 us */
+	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+};
+
+int board_early_init_f(void)
+{
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+	/* Enable 26 address bits and NCS2 */
+	portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
+
+	/* de-assert "force sys reset" pin */
+	portmux_select_gpio(PORTMUX_PORT_D, 1 << 15,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+
+	/* init custom i/o */
+	/* cpu type inputs */
+	portmux_select_gpio(PORTMUX_PORT_E, (1 << 19) | (1 << 20) | (1 << 23),
+			PORTMUX_DIR_INPUT);
+	/* main board type inputs */
+	portmux_select_gpio(PORTMUX_PORT_B, (1 << 19) | (1 << 29),
+			PORTMUX_DIR_INPUT);
+	/* DEBUG input (use weak pullup) */
+	portmux_select_gpio(PORTMUX_PORT_E, 1 << 21,
+			PORTMUX_DIR_INPUT | PORTMUX_PULL_UP);
+
+	/* are we suppressing the console ? */
+	if (gpio_get_value(GPIO_PIN_PE(21)) == 1)
+		gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
+
+	/* reset phys */
+	portmux_select_gpio(PORTMUX_PORT_E, 1 << 24, PORTMUX_DIR_INPUT);
+	portmux_select_gpio(PORTMUX_PORT_C, 1 << 18,
+			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
+
+	udelay(5000);
+
+	/* release phys reset */
+	gpio_set_value(GPIO_PIN_PC(18), 0);	/* PHY RESET (Release)	*/
+
+	/* setup Data Flash chip select (NCS2) */
+	hsmc3_writel(MODE2, 0x20121003);
+	hsmc3_writel(CYCLE2, 0x000a0009);
+	hsmc3_writel(PULSE2, 0x0a060806);
+	hsmc3_writel(SETUP2, 0x00030102);
+
+	/* setup FRAM chip select (NCS3) */
+	hsmc3_writel(MODE3, 0x10120001);
+	hsmc3_writel(CYCLE3, 0x001e001d);
+	hsmc3_writel(PULSE3, 0x08040704);
+	hsmc3_writel(SETUP3, 0x02050204);
+
+#if defined(CONFIG_MACB)
+	/* init macb0 pins */
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
+	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
+#endif
+
+#if defined(CONFIG_MMC)
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
+#endif
+
+#if defined(CONFIG_LCD)
+	portmux_enable_lcdc(1);
+#endif
+
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = uncached(EBI_SDRAM_BASE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
+}
+
+int board_early_init_r(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+	gd->bd->bi_phy_id[1] = 0x03;
+	return 0;
+}
+
+int board_postclk_init(void)
+{
+	/* Use GCLK0 as 10MHz output */
+	gclk_enable_output(0, PORTMUX_DRIVE_LOW);
+	gclk_set_rate(0, GCLK_PARENT_OSC0, 10000000);
+	return 0;
+}
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return (bus == 0) && (cs == 0);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bi)
+{
+	macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
+	macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
+
+	return 0;
+}
+#endif