Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 126 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/logicpd/zoom1/zoom1.c b/qemu/roms/u-boot/board/logicpd/zoom1/zoom1.c
new file mode 100644
index 000000000..461a85272
--- /dev/null
+++ b/qemu/roms/u-boot/board/logicpd/zoom1/zoom1.c
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Nishanth Menon <nm@ti.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *	Sunil Kumar <sunilsaini05@gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <khasim@ti.com>
+ *
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <netdev.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "zoom1.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* gpmc_cfg is initialized by gpmc_init and we use it here */
+extern struct gpmc *gpmc_cfg;
+
+/* GPMC definitions for Ethenet Controller LAN9211 */
+static const u32 gpmc_lab_enet[] = {
+	ZOOM1_ENET_GPMC_CONF1,
+	ZOOM1_ENET_GPMC_CONF2,
+	ZOOM1_ENET_GPMC_CONF3,
+	ZOOM1_ENET_GPMC_CONF4,
+	ZOOM1_ENET_GPMC_CONF5,
+	ZOOM1_ENET_GPMC_CONF6,
+	/*CONF7- computed as params */
+};
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* CS1 is Ethernet LAN9211 */
+	enable_gpmc_cs_config(gpmc_lab_enet, &gpmc_cfg->cs[1],
+			      DEBUG_BASE, GPMC_SIZE_16M);
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure zoom board specific configurations
+ */
+int misc_init_r(void)
+{
+	twl4030_power_init();
+	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+	dieid_num_r();
+
+	/*
+	 * Board Reset
+	 * The board is reset by holding the red button on the
+	 * top right front face for eight seconds.
+	 */
+	twl4030_power_reset_init();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	/* platform specific muxes */
+	MUX_ZOOM1_MDK();
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_SMC911X
+#define STR_ENV_ETHADDR	"ethaddr"
+
+	struct eth_device *dev;
+	uchar eth_addr[6];
+
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+	if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) {
+		dev = eth_get_dev_by_index(0);
+		if (dev) {
+			eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr);
+		} else {
+			printf("zoom1: Couldn't get eth device\n");
+			rc = -1;
+		}
+	}
+#endif
+
+	return rc;
+}
+#endif