diff options
author | Yang Zhang <yang.z.zhang@intel.com> | 2015-08-28 09:58:54 +0800 |
---|---|---|
committer | Yang Zhang <yang.z.zhang@intel.com> | 2015-09-01 12:44:00 +0800 |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/u-boot/board/kup/kup4x | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/u-boot/board/kup/kup4x')
-rw-r--r-- | qemu/roms/u-boot/board/kup/kup4x/Makefile | 8 | ||||
-rw-r--r-- | qemu/roms/u-boot/board/kup/kup4x/kup4x.c | 185 | ||||
-rw-r--r-- | qemu/roms/u-boot/board/kup/kup4x/u-boot.lds | 82 | ||||
-rw-r--r-- | qemu/roms/u-boot/board/kup/kup4x/u-boot.lds.debug | 121 |
4 files changed, 396 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/kup/kup4x/Makefile b/qemu/roms/u-boot/board/kup/kup4x/Makefile new file mode 100644 index 000000000..6945943d0 --- /dev/null +++ b/qemu/roms/u-boot/board/kup/kup4x/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = kup4x.o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o diff --git a/qemu/roms/u-boot/board/kup/kup4x/kup4x.c b/qemu/roms/u-boot/board/kup/kup4x/kup4x.c new file mode 100644 index 000000000..0e51bd1c8 --- /dev/null +++ b/qemu/roms/u-boot/board/kup/kup4x/kup4x.c @@ -0,0 +1,185 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mpc8xx.h> +#include <post.h> +#include "../common/kup.h" +#include <asm/io.h> + + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = { + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, + 0x1FF77C47, /* last */ + + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ + + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + + +/* + * Check Board Identity: + */ + +int checkboard(void) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + uchar latch, rev, mod; + + /* + * Init ChipSelect #4 (CAN + HW-Latch) + */ + out_be32(&memctl->memc_or4, 0xFFFF8926); + out_be32(&memctl->memc_br4, 0x90000401); + + latch = in_8( (unsigned char *) LATCH_ADDR); + rev = (latch & 0xF8) >> 3; + mod = (latch & 0x03); + + printf("Board: KUP4X Rev %d.%d\n", rev, mod); + + return 0; +} + + +phys_size_t initdram(int board_type) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + upmconfig(UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR); + + out_be32(&memctl->memc_mar, 0x00000088); + + out_be32(&memctl->memc_mamr, + CONFIG_SYS_MAMR & (~(MAMR_PTAE))); /* no refresh yet */ + + udelay(200); + + /* perform SDRAM initializsation sequence */ + + /* SDRAM bank 0 */ + out_be32(&memctl->memc_mcr, 0x80002105); + udelay(1); + out_be32(&memctl->memc_mcr, 0x80002830); /* execute twice */ + udelay(1); + out_be32(&memctl->memc_mcr, 0x80002106); /* RUN MRS Pattern from loc 6 */ + udelay(1); + + /* SDRAM bank 1 */ + out_be32(&memctl->memc_mcr, 0x80004105); + udelay(1); + out_be32(&memctl->memc_mcr, 0x80004830); /* execute twice */ + udelay(1); + out_be32(&memctl->memc_mcr, 0x80004106); /* RUN MRS Pattern from loc 6 */ + udelay(1); + + /* SDRAM bank 2 */ + out_be32(&memctl->memc_mcr, 0x80006105); + udelay(1); + out_be32(&memctl->memc_mcr, 0x80006830); /* execute twice */ + udelay(1); + out_be32(&memctl->memc_mcr, 0x80006106); /* RUN MRS Pattern from loc 6 */ + udelay(1); + + /* SDRAM bank 3 */ + out_be32(&memctl->memc_mcr, 0x8000C105); + udelay(1); + out_be32(&memctl->memc_mcr, 0x8000C830); /* execute twice */ + udelay(1); + out_be32(&memctl->memc_mcr, 0x8000C106); /* RUN MRS Pattern from loc 6 */ + udelay(1); + + setbits_be32(&memctl->memc_mamr, MAMR_PTAE); /* enable refresh */ + + udelay(1000); + /* 4 x 16 MB */ + out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR); + udelay(1000); + out_be32(&memctl->memc_or1, 0xFF000A00); + out_be32(&memctl->memc_br1, 0x00000081); + out_be32(&memctl->memc_or2, 0xFE000A00); + out_be32(&memctl->memc_br2, 0x01000081); + out_be32(&memctl->memc_or3, 0xFD000A00); + out_be32(&memctl->memc_br3, 0x02000081); + out_be32(&memctl->memc_or6, 0xFC000A00); + out_be32(&memctl->memc_br6, 0x03000081); + udelay(10000); + + return (4 * 16 * 1024 * 1024); +} + +int misc_init_r(void) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + +#ifdef CONFIG_IDE_LED + /* Configure PA8 as output port */ + setbits_be16(&immap->im_ioport.iop_padir, PA_8); + setbits_be16(&immap->im_ioport.iop_paodr, PA_8); + clrbits_be16(&immap->im_ioport.iop_papar, PA_8); + setbits_be16(&immap->im_ioport.iop_padat, PA_8); /* turn it off */ +#endif + load_sernum_ethaddr(); + setenv("hw", "4x"); + poweron_key(); + return 0; +} diff --git a/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds b/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds new file mode 100644 index 000000000..0eb2fba00 --- /dev/null +++ b/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2000-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_ARCH(powerpc) + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .text : + { + arch/powerpc/cpu/mpc8xx/start.o (.text*) + arch/powerpc/cpu/mpc8xx/traps.o (.text*) + + *(.text*) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data*) + *(.sdata*) + } + _edata = .; + PROVIDE (edata = .); + + . = .; + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.bss*) + *(.sbss*) + *(COMMON) + . = ALIGN(4); + } + __bss_end = . ; + PROVIDE (end = .); +} diff --git a/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds.debug b/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds.debug new file mode 100644 index 000000000..0ea27e875 --- /dev/null +++ b/qemu/roms/u-boot/board/kup/kup4x/u-boot.lds.debug @@ -0,0 +1,121 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + arch/powerpc/cpu/mpc8xx/start.o (.text) + common/dlmalloc.o (.text) + lib/vsprintf.o (.text) + lib/crc32.o (.text) + + . = env_offset; + common/env_embedded.o(.text) + + *(.text) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + __bss_end = . ; + PROVIDE (end = .); +} |