Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

5 files changed, 400 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/gdsys/intip/Makefile b/qemu/roms/u-boot/board/gdsys/intip/Makefile
new file mode 100644
index 000000000..2fbc983e3
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/intip/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2008
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= intip.o
+obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+extra-y	+= init.o
diff --git a/qemu/roms/u-boot/board/gdsys/intip/chip_config.c b/qemu/roms/u-boot/board/gdsys/intip/chip_config.c
new file mode 100644
index 000000000..ea276a358
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/intip/chip_config.c
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"800-nor", "NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1000-nor", "NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1066-nor", "NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+		{
+			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1066-nand", "NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+		{
+			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/qemu/roms/u-boot/board/gdsys/intip/config.mk b/qemu/roms/u-boot/board/gdsys/intip/config.mk
new file mode 100644
index 000000000..c8c53e216
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/intip/config.mk
@@ -0,0 +1,19 @@
+#
+# (C) Copyright 2008-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+#
+# G&D CompactCenter
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
diff --git a/qemu/roms/u-boot/board/gdsys/intip/init.S b/qemu/roms/u-boot/board/gdsys/intip/init.S
new file mode 100644
index 000000000..1fc2a2f3e
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/intip/init.S
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * Based on board/amcc/canyonlands/init.S
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+	 * use the speed up boot process. It is patched after relocation to
+	 * enable SA_I
+	 */
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
+		4, AC_RWX | SA_G) /* TLB 0 */
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR,
+		0, AC_RWX | SA_G)
+#endif
+
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
+		AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC,
+		AC_RW | SA_IG)
+
+	/* TLB-entry for NVRAM */
+	tlbentry(CONFIG_SYS_NVRAM_BASE, SZ_1M, CONFIG_SYS_NVRAM_BASE, 4,
+		AC_RW | SA_IG)
+
+	/* TLB-entry for UART */
+	tlbentry(CONFIG_SYS_UART_BASE, SZ_16K, CONFIG_SYS_UART_BASE, 4,
+		AC_RW | SA_IG)
+
+	/* TLB-entry for IO */
+	tlbentry(CONFIG_SYS_IO_BASE, SZ_16K, CONFIG_SYS_IO_BASE, 4,
+		AC_RW | SA_IG)
+
+	/* TLB-entry for OCM */
+	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
+		AC_RWX | SA_I)
+
+	/* TLB-entry for Local Configuration registers => peripherals */
+	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS,
+		4, AC_RWX | SA_IG)
+
+	/* AHB: Internal USB Peripherals (USB, SATA) */
+	tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4,
+		AC_RWX | SA_IG)
+
+	tlbtab_end
diff --git a/qemu/roms/u-boot/board/gdsys/intip/intip.c b/qemu/roms/u-boot/board/gdsys/intip/intip.c
new file mode 100644
index 000000000..ee6f9e06c
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/intip/intip.c
@@ -0,0 +1,219 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * Based on board/amcc/canyonlands/canyonlands.c
+ * (C) Copyright 2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc440.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/4xx_pcie.h>
+#include <asm/ppc4xx-gpio.h>
+
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CONFIG_SYS_BCSR3_PCIE		0x10
+
+int board_early_init_f(void)
+{
+	/*
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 */
+	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC0ER, 0x00000000);	/* disable all */
+	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC1ER, 0x00000000);	/* disable all */
+	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC2ER, 0x00000000);	/* disable all */
+	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC3ER, 0x00000000);	/* disable all */
+	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * enable GPIO 49-63
+	 * UART0: 4 pins
+	 */
+	mtsdr(SDR0_PFC0, 0x00007fff);
+	mtsdr(SDR0_PFC1, 0x00040000);
+
+	/* Enable PCI host functionality in SDR0_PCI0 */
+	mtsdr(SDR0_PCI0, 0xe0000000);
+
+	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
+
+	/* Setup PLB4-AHB bridge based on the system address map */
+	mtdcr(AHB_TOP, 0x8000004B);
+	mtdcr(AHB_BOT, 0x8000004B);
+
+	/*
+	* Configure USB-STP pins as alternate and not GPIO
+	* It seems to be neccessary to configure the STP pins as GPIO
+	* input at powerup (perhaps while USB reset is asserted). So
+	* we configure those pins to their "real" function now.
+	*/
+	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+
+	/* Trigger board component reset */
+	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
+	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
+	udelay(50);
+	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
+	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
+	udelay(50);
+	out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
+	out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
+
+	return 0;
+}
+
+int get_cpu_num(void)
+{
+	int cpu = NA_OR_UNKNOWN_CPU;
+
+	return cpu;
+}
+
+int checkboard(void)
+{
+	char buf[64];
+	int i = getenv_f("serial#", buf, sizeof(buf));
+
+#ifdef CONFIG_DEVCONCENTER
+	printf("Board: DevCon-Center");
+#else
+	printf("Board: Intip");
+#endif
+
+	if (i > 0) {
+		puts(", serial# ");
+		puts(buf);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	/*
+	 * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
+	 * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
+	 * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
+	 * To solve this problem, the FLASH has to get remapped to another
+	 * EBC address which accepts bigger regions:
+	 *
+	 * 0xfn00.0000 -> 4.cn00.0000
+	 */
+
+	u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
+		EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
+
+	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
+	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
+		| bxcr_bw
+		| EBC_BXCR_BU_RW
+		| EBC_BXCR_BW_16BIT);
+
+	/* Remove TLB entry of boot EBC mapping */
+	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
+
+	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
+	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+	 * 0xfc00.0000 is possible
+	 */
+
+	/*
+	 * Clear potential errors resulting from auto-calibration.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u32 sdr0_srst1 = 0;
+	u32 eth_cfg;
+
+	/*
+	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+	 * This is board specific, so let's do it here.
+	 */
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	/* disable SGMII mode */
+	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
+		     SDR0_ETH_CFG_SGMII1_ENABLE |
+		     SDR0_ETH_CFG_SGMII0_ENABLE);
+	/* Set the for 2 RGMII mode */
+	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
+	eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+	mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+	/*
+	 * The AHB Bridge core is held in reset after power-on or reset
+	 * so enable it now
+	 */
+	mfsdr(SDR0_SRST1, sdr0_srst1);
+	sdr0_srst1 &= ~SDR0_SRST1_AHB;
+	mtsdr(SDR0_SRST1, sdr0_srst1);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+extern void __ft_board_setup(void *blob, bd_t *bd);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	__ft_board_setup(blob, bd);
+
+	fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
+			     "disabled", sizeof("disabled"), 1);
+
+	fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
+			     "disabled", sizeof("disabled"), 1);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */